Instrumentation and Detectors

AG-2026.04-1344

physics.ins-det

Phenomenological Detector Design and Optimization in Vertically-Integrated Differentiable Full Simulations with Agentic-AI

Wonyong Chung, Qibin Liu, Liangyu Wu, Julia Gonski

We present the first implementation of AI agents into the design and optimization of detectors in high-energy physics experiments via a bilevel optimization framework that vertically integrates detector geometry, front-end digitization, and high-level reconstruction algorithm parameters in differentiable full simulations. Using the example of a dual-readout, segmented crystal EM calorimeter with a baseline resolution of $3\%/\sqrt{E}$, we investigate the capabilities and value propositions of AI agents in the identification and reduction of key detector parameters and in the nonlinear traversal of a given detector design's full parameter space. We find that LLM-based reasoning models today, without being given additional experiment-specific context, are able to effectively execute complex workflows and proactively suggest generic but relevant avenues for further study or improvement. Here, we demonstrate an AI agent's ability to use the workflow to simultaneously optimize a representative subset of vertically integrated detector parameters: crystal granularity and length, number of ADC bits and sampling rate, and center-of-gravity hit-clustering radius. We find that effective integration of agents into the complex workflows of frontier areas of research not only significantly reduces labor and compute, but opens up efficient avenues for computational validation of first-principles design choices. While the ability to make autonomous leaps of physics-motivated judgment or insight is not demonstrated in this work, this study defines the current frontier of experimental design methods in high-energy physics.

AG-2026.04-452

physics.ins-det

Nuclear Heterodyne Interferometry for Gravitational Spectroscopy

Ralf Röhlsberger

Gravitational spectroscopy tests the coupling of gravity to matter by measuring gravitationally induced frequency shifts of quantum transitions. While modern optical clocks probe the gravitational response of electronic transitions with extraordinary precision, tests in the nuclear sector have not progressed since the Mössbauer measurements of the gravitational redshift by Pound and Rebka. Here we introduce a new approach to nuclear gravitational spectroscopy based on phase-sensitive heterodyne interferometry of time-resolved nuclear resonant scattering of synchrotron radiation. In this scheme the gravitational redshift appears as a slowly accumulating phase drift of a delayed heterodyne beat signal, converting nuclear gravitational spectroscopy from energy-domain detection to time-domain interferometry. A Fisher-information analysis supported by Monte Carlo simulations and experimentally confirmed photon count rates shows that the nuclear gravitational redshift of $^{57}$Fe can be detected within hours on a few-meter-scale vertical baseline, with percent-level precision on deviations from general relativity becoming accessible on day-scale timescales. The method thus establishes an experimentally realistic and scalable platform for precision tests of gravitational coupling to nuclear structure.

AG-2026.04-1132

physics.ins-det

An AI-based Detector Simulation and Reconstruction Model for the ALEPH Experiment at LEP

Ya-Feng Lo, Dmitrii Kobylianskii, Benjamin Nachman

We present the application of Parnassus, a generative model for full detector simulation and reconstruction, to the ALEPH detector at the Large Electron-Positron Collider (LEP). Training on simulated $e^+e^-$ to Z to qqbar events processed through the ALEPH detector simulation and reconstruction, we demonstrate that Parnassus faithfully reproduces the detector response at the event, jet, and particle levels. The clean $e^+e^-$ environment, free of pileup and characterized by simple event topologies, provides a well-controlled benchmark for evaluating the generative model's fidelity. Our results demonstrate that modern neural-network-based generative simulation approaches, developed primarily for LHC experiments, generalize naturally to historical collider experiments with distinct detector geometries and physics environments. This work shows that Parnassus can be applied beyond the LHC context and serves as an important tool for legacy data analysis where archival software tools are challenging to resurrect.

AG-2026.04-1104

physics.ins-det

Toward Neutrino and Dark Matter Detection with Ancient Minerals: TEM Study of Heavy-Ion Tracks in Olivine

Andrew Calabrese-Day, Emilie LaVoie-Ingram, Kathryn Ream, Hannah Ross, Joshua Spitz, Patrick Stengel, Kai Sun, Alexander Takla

Solar, supernova, and atmospheric neutrinos, and possibly weakly interacting massive particle (WIMP) dark matter, have been interacting in the Earth beneath our feet for billions of years. The ''paleo-detector'' technique seeks to detect and characterize the induced crystalline defects from these events, in particular from energetic nuclear recoils, which in some minerals can be preserved on these timescales. Such defects can manifest as nuclear recoil tracks, on the order of a few nanometers wide and extending up to hundreds of microns in length, which can be detected with nanoscale-resolution microscopy. In order to test the feasibility of the paleo-detector technique and to study the formation and morphology of track defects in promising mineral candidates like olivine, we use ion irradiation to artificially implant tracks to effectively mimic astrophysical particle interactions. We present a study of heavy-ion track width as a function of depth, which we relate to ion energy, in an olivine crystal irradiated with 15 MeV Au$^{+5}$ using scanning transmission electron microscopy (STEM). Unlike previous studies, which measure tracks at the surface of the irradiated sample, we instead take measurements at various target depths via focused ion-beam sectioning of the irradiated sample. No etching techniques are used to enhance the tracks. In addition, we provide a comparison to predictions from simulations using SRIM software and previous results with a variety of ion species and energies. Notably, we find that a significant change in track continuity across the energy range studied (0.4-12.9 MeV) is indicative of the transition between electronic and nuclear stopping power dominance, consistent with the simulations' predictions. Overall, the tracks produced in olivine indicate that this mineral is an attractive candidate for paleo-detection, with robust track creation at the MeV scale.

AG-2026.04-162

physics.ins-det

Noise budget of Cryogenic sub-Hz cROss torsion bar detector with quantum NOn-demolition Speed meter (CHRONOS)

Mario Juvenal S. Onglao, Hsiang-Yu Huang, Yuki Inoue, Vivek Kumar, Daiki Tanabe

CHRONOS is a proposed gravitational-wave detector designed to operate in the sub-Hz frequency range (0.1 to 10 Hz), a largely unexplored band due to strong noise sources that hamper ground-based detectors. It employs cryogenic operation, a cross torsion-bar configuration, a triangular Sagnac interferometer, and a speed meter readout scheme to overcome key noise limitations, targeting a strain sensitivity of $h \sim 10^{-18} Hz^{-1/2}$ around 2 Hz and a stochastic gravitational wave background of $Ω_{GW}$ approximately $2 \times 10^{-3}$ at 2 Hz. Using analytical and interferometric simulations with FINESSE3, we evaluate the noise budget of CHRONOS and characterize the relative contributions of quantum, thermal, and environmental noise sources. Our results demonstrate that CHRONOS achieves competitive sensitivity at low frequencies. The feasibility of using CHRONOS in an earthquake early-warning system by detecting prompt gravity-gradient signals is also investigated, and is predicted to be faster by approximately 2.92 to 6.90 seconds within 40 km. These findings highlight the scientific potential of CHRONOS, bridging gravitational-wave astronomy and geophysical monitoring, and motivating further development of low-frequency detector technologies.

AG-2026.03-1756

physics.ins-det

Effects of Cosmic Muons on $μ$eV-to-meV Scale Axion Dark Matter Searches

Dan Zhang, Gray Rybka, Edward J. Daw, Robyn Evren

We estimate the synchrotron radiation of cosmic muons in a uniform magnetic field in the $μ$eV-to-meV energy scale. Such events can potentially bring backgrounds to the axion dark matter searches. The GEANT4 software package is utilized to simulate the muon tracks in a cylindrical region of interest with an 8~T solenoid magnetic field applied. We further develop an analytical estimation of the angular-frequency-differential synchrotron radiation power spectra in this work as the cosmic muons span a wide range of Lorentz factor $γ$ and pitch angle $α$. We verify that the cosmic muons are not the dominant noise background for the current axion dark matter experiments on the $μ$eV scale because of the high quality factor $Q$ and fine energy resolution in the readout. However, without sufficient energy resolution in the detector readout, future broadband axion dark matter experiments will be vulnerable to the synchrotron radiation of these charged particles.

AG-2026.03-1465

physics.ins-det

Ultra Fast Calorimeter Simulation with Generative Machine Learning on FPGAs

P. Alex May, Qibin Liu, Julia Gonski, Benjamin Nachman

Computationally expensive, high-accuracy detector simulations are a major bottleneck for many particle physics experiments such as those at the Large Hadron Collider (LHC) as well as those planned for future colliders. This challenge has motivated the development of fast generative machine learning based surrogates. We present a hardware-aware variational autoencoder model for fast calorimeter simulation that is designed specifically for field programmable gate array (FPGA) deployment, offering faster and lower power inference capability. Quantization aware training and other compression techniques are applied to respect the resource constraints of a single FPGA. The synthesized implementation of the VAE decoder achieves sub-millisecond latency, resulting in a substantial speed up compared to a traditional GPU implementation with only a small performance drop. This feasibility study demonstrates the potential of utilizing existing FPGA architecture at the LHC and other facilities for efficient offline computing using online resources.

AG-2026.03-1402

physics.ins-det

Polarized Target Nuclear Magnetic Resonance Measurements with Deep Neural Networks

Devin Seay, Ishara P. Fernando, Dustin Keller

Continuous-wave Nuclear Magnetic Resonance (CW-NMR) operated in constant-current mode has served as a foundational technique for polarization measurement in solid-state dynamically polarized targets within nuclear and high-energy physics experiments for several decades, and it remains an essential tool. Conventional Q-meter-based phase-sensitive detection is critical for precise real-time determination of target polarization during scattering runs. However, the accuracy and reliability of these measurements are frequently compromised by elevated noise levels, baseline drift, and systematic uncertainties arising from signal isolation and fitting, ultimately degrading the overall experimental figure of merit. In this work, we report the first successful application of neural network architectures to continuous-wave NMR polarization metrology. By leveraging advanced machine learning techniques for signal extraction and denoising, we achieve a substantial reduction of fitting uncertainties under a variety of realistic simulated and experimental conditions. These improvements translate directly into more robust real-time (online) polarization monitoring and significantly higher precision in subsequent offline analysis. The resulting methodology offers an improved figure of merit for scattering experiments employing dynamically polarized targets and establishes a new tools for NMR-based polarimetry in high-energy and nuclear physics.

AG-2026.02-1263

physics.ins-det

Detector-level assessment of alternative target nuclei for CEvNS experiments under realistic experimental conditions

Yusuf Havvat

Coherent Elastic Neutrino-Nucleus Scattering (CEvNS) provides a sensitive probe of neutrino interactions at low momentum transfer, but its experimental observation is strongly constrained by detector-related effects such as energy threshold, resolution, noise, and event-selection criteria. In this work, we perform a detector-level assessment of CEvNS nuclear recoil observability under realistic experimental conditions, with particular emphasis on the role of detector response in shaping measurable recoil spectra. Using detailed Geant4-based simulations, CEvNS interactions are modeled for a set of alternative target nuclei spanning light to intermediate mass ranges. The true nuclear recoil energy distributions are propagated through a simplified yet realistic detector-response chain incorporating energy smearing, noise-induced fluctuations, threshold cuts, and veto-based event selection. We present a systematic analysis of recoil energy spectra before and after detector effects, response matrices linking true and reconstructed energies, and energy-dependent selection efficiencies. The results demonstrate that detector response effects significantly modify the observable CEvNS signal, particularly in the near-threshold region where most recoil events are concentrated. Differences in efficiency turn-on behavior and reconstructed energy distributions highlight the target-nucleus dependence of CEvNS observability under identical detector conditions. Rather than focusing on absolute event-rate predictions, this study emphasizes the relative impact of detector effects on signal accessibility and target performance. The presented framework provides a consistent methodology for evaluating and comparing prospective CEvNS target materials at the detector level, offering practical guidance for future low-threshold CEvNS experiments and detector design optimization.

AG-2026.01-1215

physics.ins-det

Comprehensive study of cosmogenic neutron production in large liquid scintillator detectors

Yijian Jiang, Jie Cheng, Haoqi Lu, Yaoguang Wang

Neutrons produced by cosmic ray muons constitute a significant background for underground experiments investigating neutron oscillations, neutrinoless double beta decay, dark matter, and other rare event signals. This work benchmarks measured neutron yields and neutron multiplicities--with a focus on data from the Daya Bay Reactor Neutrino Experiment--against comprehensive simulations using three GEANT4 hadronic physics lists. These simulations are further refined via a TALYS-based adjustment of hadronic cross sections. For the BERT-based models, the adjustment reduces the discrepancy in the total neutron yield from about 20% to approximately 6%, while for the BIC-based models it improves the agreement from roughly 13% to the sub-percent level (~0.3%), indicating a markedly better consistency of the BIC-based models with the experimental data. Nevertheless, a clear tension persists: simulations systematically underproduce single-neutron events while overproducing multi-neutron events. The study establishes a reproducible benchmark for cosmogenic neutron modeling and proposes a targeted refinement strategy--including channel-specific reweighting and intranuclear cascade parameter tuning--to guide future model development.

AG-2026.01-346

physics.ins-det

Nanofabricated torsion pendulums for tabletop gravity experiments

Jack Manley, Charles A. Condos, Zachary Fegley, Gayathrini Premawardhana, Thomas Bsaibes, Jacob M. Taylor, Dalziel J. Wilson, Jon R. Pratt

Measurement of mutual gravitation on laboratory scales is an outstanding challenge and a prerequisite to probing theories of quantum gravity. A leading technology in tabletop gravity experiments is the torsion balance, with limitations due to thermal decoherence. Recent demonstrations of lithographically defined suspensions in thin-film silicon nitride with macroscale test masses suggest a path forward, as torsion pendulums dominated by gravitational stiffness may achieve higher mechanical quality factors through dilution of material losses. Here we demonstrate a 250 micron by 5 mm by 1.8 micron torsion fiber supporting 87 grams and forming a Cavendish-style torsion pendulum with tungsten test masses that -- to our knowledge -- is the largest thin-film silicon-nitride-based oscillator to date. Torsion pendulums with thin-film, nanofabricated suspensions provide a test bed for near-term tabletop experiments probing classical and quantum gravitational interaction between oscillators.

AG-2026.01-291

physics.ins-det

DC response of an interferometer topology with an L-shaped cavity: a tabletop study

Junlang Li, Jiehong Huang, Xinyao Guo, Haixing Miao, Yuchao Chen, Xiaoman Huang, Yuan Pan, Chenjie Zhou, Raffaele Flaminio, Jameson Graef Rollins, Bram Slagmolen, Fan Zhang, Teng Zhang, Mengyao Wang

A new interferometer topology for kilohertz gravitational-wave detection was recently proposed in [Zhang et al. Phys. Rev. X 13, 021019 (2023)]. The design is based on an L-shaped optical cavity pumped through a Sagnac-like vortex. We report a tabletop experiment that characterizes the interferometer's optical response near DC. When the laser frequency is locked to the resonance of the L-shaped cavity, we observe that the cavity input coupler becomes effectively transparent, yielding a simple Michelson-like response. Moreover, the Sagnac vortex separates into upper and lower paths, which behave as two independent pumping paths driving the cavity. These observations are in agreement with theoretical predictions. Our results provide an intuitive physical picture of this interferometer topology and offer insight into its lock acquisition strategy.

AG-2026.01-195

physics.ins-det

Robust Bilinear-Noise-Optimal Control for Gravitational-Wave Detectors: A Mixed LQG/$H_\infty$ Approach

Ian A. O. MacMillan, Lee P. McCuller

At its lowest frequencies, LIGO is limited by noise in its many degrees of freedom of suspended optics, which, in turn, introduce noise in the interferometer through their feedback control systems. Nonlinear interactions are a dominant source of low-frequency noise, mixing noise from multiple degrees of freedom. The lowest-order form is bilinear noise, in which the noise from two feedback-controlled subsystems multiplies to mask gravitational waves. Bilinear couplings require control trade-offs that simultaneously balance high- and low-frequency noise. Currently, there is no known lower limit to bilinear control noise. Here, we develop benchmark cost functions for bilinear noise and associated figures of merit. Linear-quadratic-Gaussian control then establishes aggressive feedback that saturates the lower bounds on the cost functions. We then develop a mixed LQG and $H_\infty$ approach to directly compute stable, robust, and optimal feedback, using the LIGO's alignment control system as an example. Direct computations are fast while ensuring a global optimum. By calculating optimal robust control, it is possible to construct the lower bound on controls noise along the Pareto front of practical controllers for LIGO. This method can be used to drastically improve controls noise in existing observatories as well as to set subsystem control noise requirements for next-generation detectors with parameterized design.

AG-2026.01-1112

physics.ins-det

Improving TauFinder Reconstruction at a 10 TeV Muon Collider with the MAIA Detector Concept

Cyrus Kianian, Moses Glassman, Abdollah Mohammadi

This study aims to improve the TauFinder reconstruction algorithm for the MAIA detector concept. Through this work, we seek to increase the reconstruction efficiency and identification of hadronically decaying tau leptons. Through our work, we introduce a dynamic signal cone, known as a shrinking cone, which adjusts its size based on the transverse momentum of the tau candidate. In addition to the already studied one charged hadron and three charged hadron decay modes we extend TauFinder to include decays that consist of one charged hadron and up to two neutral pions. Furthermore, we have developed a tagger that prevents electrons being misidentified as one-prong tau candidates. Applying this tagger results in near-perfect electron rejection with negligible decrease in one-prong tau reconstruction efficiency.

AG-2026.01-058

physics.ins-det

Terrestrial Test of Shapiro Time Delay: Forth test of Einstein General Theory of Relativity

Farhad Hakimi, Hosain Hakimi

The Shapiro time delay is one of the four classical tests of Einstein general theory of relativity and is commonly interpreted as a constrain on the parametrized post Newtonian (PPN) parameter gamma, which is exactly unity in general relativity. To date all measurement of the Shapiro time delay have been confined to astrophysical and solar system observations, yielding constrains on the PPN parameter gamma at the 10-5 level. In this work, we propose a fiber based Sagnac interferometer for precision terrestrial measurements of the Shapiro time delay, enabling a laboratory scale determination of gamma with an intrinsic sensitivity approaching 10-9. This approach provides an independent test of general relativity in a previously unexplored regime.

AG-2025.12-483

physics.ins-det

In situ substrate birefringence characterization in gravitational wave detectors using a heterodyne polarimetry method

Satoshi Tanioka, Terri Pearce, Yuta Michimura, Kazuhiro Agatsuma, Martin Van Beuzekom, Alberto Vecchio, Stephen Webster, Matteo Leonardi, Keiko Kokeyama

High-quality test mass substrates play essential roles in laser interferometric gravitational wave detectors. Inhomogeneous birefringence distribution in test mass substrates, however, can degrade the sensitivity of the detector by introducing the optical loss and disturbing the interferometer controls. In this paper, we present a heterodyne polarimetry method that enables in situ birefringence characterizations, hence diagnosing the gravitational wave interferometer. We experimentally demonstrate the proposed method with a tabletop setup. We also discuss its applicability to current and future gravitational wave detectors and the detectable limit.

AG-2025.12-1547

physics.ins-det

Scintillation response of cryogenic CsI to few-keV and sub-keV nuclear recoils

J. I. Collar, C. M. Lewis, A. Simón, S. G. Yoon

Monochromatic neutron emissions from photonuclear sources $^{88}$Y/Be and $^{124}$Sb/Be are employed to obtain the response of pure (undoped) cesium iodide at 80 K. The use of a low-noise, high-quantum-efficiency avalanche photodiode in combination with a novel waveshifter results in a 70 eV analysis threshold. This reach allows to observe signals from sub-keV nuclear recoils originating in neutron scattering. The extracted quenching factor drops much faster towards low energy than the extrapolation of a model developed for room-temperature CsI[Na]. We comment on the impact of our measurement on planned use of cryogenic CsI in neutrino physics and dark matter experiments.

AG-2025.11-1571

physics.ins-det

Cross-Geometry Transfer Learning in Fast Electromagnetic Shower Simulation

Frank Gaede, Gregor Kasieczka, Lorenzo Valente

Accurate particle shower simulation remains a critical computational bottleneck for high-energy physics. Traditional Monte Carlo methods, such as Geant4, are computationally prohibitive, while existing machine learning surrogates are tied to specific detector geometries and require complete retraining for each design change or alternative detector. We present a transfer learning framework for generative calorimeter simulation models that enables adaptation across diverse geometries with high data efficiency. Using point cloud representations and pre-training on the International Large Detector detector, our approach handles new configurations without re-voxelizing showers for each geometry. On the CaloChallenge dataset, transfer learning with only 100 target-domain samples achieves a $44\%$ improvement on the geometric mean of Wasserstein distance over training from scratch. Parameter-efficient fine-tuning with bias-only adaptation achieves competitive performance while updating only $17\%$ of model parameters. Our analysis provides insight into adaptation mechanisms for particle shower development, establishing a baseline for future progress of point cloud approaches in calorimeter simulation.

AG-2025.11-507

physics.ins-det

From LIGO to Fiber- Compact Sagnac Interferometer for Gravitational-Wave Detection

Farhad Hakimi, Hosain Hakimi

Gravitational wave detection has transformed astrophysics, granting us direct access to black hole mergers, neutron star collisions, and the cataclysms of stellar death. Yet the great observatories of today, LIGO, Virgo, KAGRA, and the planned Einstein Telescope, rest on Michelson interferometers that, despite their triumphs, confront fundamental barriers of scale, cost, and environmental vulnerability. We envision a new path, a Sagnac-based fiber interferometer that leverages reciprocity and inherent robustness. Its meter-scale, modular design compact enough to fit within a small facility, offers dramatic gains in scalability and affordability over kilometer scale Michelson systems. Tunable to frequency bands where conventional detectors lose sensitivity, it opens the door to compact, versatile, and accessible GW observatories, empowering universities and research centers worldwide. Linked together in a global network, such facilities could transcend mere detection, they could localize cosmic sources and reconstruct them into images, much as black holes were first directly revealed, ushering in a new era of gravitational-wave astronomy and multi-messenger discovery.

AG-2025.11-113

physics.ins-det

Quadrature-witness readout for backscatter mitigation in gravitational-wave detectors limited by back-action

Niels Böttner, Roman Schnabel, Mikhail Korobko

Disturbances in gravitational wave (GW) observational data are often caused by non-stationary noise in the detector itself, such as back-scattering of laser stray light into the signal field. Unlike GW signals, non-stationary noise can appear in both the GW-signal quadrature and the orthogonal quadrature, which is usually not measured. Simultaneous sensing of this orthogonal quadrature provides a witness channel that can be used to reconstruct the disturbance in the signal quadrature enabling a subtraction of non-stationary noise. Here, we present the concept of quadrature witness that is compatible with frequency-dependent squeezing, which is already used to simultaneously reduce photon shot noise and photon radiation pressure noise. We demonstrate that implementing this approach in a GW detector could reduce noise caused by loud back-scatter events, thereby improving the overall sensitivity and robustness of GW observatories.

AG-2025.11-103

physics.ins-det

High-Q Superconducting Lumped-Element Resonators for Low-Mass Axion Searches

Roman Kolevatov, Saptarshi Chaudhuri, Lyman Page

Low-frequency superconducting lumped-element resonators have recently attracted significant attention in the context of axion dark matter searches. Here we present the design and implementation of a fixed-frequency superconducting resonator operating near $250~\mathrm{kHz}$, possessing an inductor volume of $\sim 1$ liter and achieving an unloaded quality factor $Q \approx 2.1\times10^{6}$. This resonator represents a significant improvement over the state of the art and informs the design of searches for low-mass axions.

AG-2025.10-542

physics.ins-det

Optical design and sensitivity optimization of Cryogenic sub-Hz cROss torsion bar detector with quantum NOn-demolition Speed meter (CHRONOS)

Yuki Inoue, Daiki Tanabe, M. Afif Ismail, Vivek Kumar, Mario Juvenal S Onglao, Ta-Chun Yu

We present the optical design and sensitivity modeling of the 2.5 m Cryogenic sub-Hz cROss torsion-bar detector with quantum NOn-demolition Speed meter (CHRONOS), a triangular Sagnac speed-meter interferometer incorporating power- and signal-recycling techniques. Using ABCD-matrix analysis and Finesse3 simulations, we show that stable eigenmodes are obtained with optimized mirror curvatures and focal placements, achieving mode-matching efficiencies above 99.5 %. The resulting configuration reaches a quantum-noise-limited strain sensitivity of $h \simeq 3\times10^{-18},\mathrm{Hz^{-1/2}}$ at 1 Hz, with a ring-cavity finesse $\mathcal{F}\simeq3.1\times10^{4}$ and round-trip Gouy phase $ψ_{\mathrm{rt}}\approx153^{\circ}$. The power-recycling cavity detuning ($φ_p=-85^{\circ}$) dominates the low-frequency quantum noise, while the signal-recycling cavity detuning ($φ_s=0^{\circ}$) mainly introduces a uniform quadrature rotation. The optimal homodyne angle ($ζ_{\mathrm{opt}}\simeq46^{\circ}$) balances shot-noise and radiation-pressure effects to give the best sensitivity near 1 Hz. Assuming end-mirror reflectivity $R_{\mathrm{ETM}}=99.9999\%$ under cryogenic operation at 10 K, CHRONOS can achieve quantum-noise-limited performance on a laboratory scale and serve as a testbed for future long-baseline, cryogenic interferometers probing sub-hertz gravitational waves.

AG-2025.10-541

physics.ins-det

Torque cancellation effect of Intensity noise for Cryogenic sub-Hz cROss torsion bar detector with quantum NOn-demolition Speed meter (CHRONOS)

Daiki Tanabe, Yuki Inoue, Vivek Kumar, Miftahul Ma'arif, Ta-Chun Yu

Detection of sub-Hz gravitational waves is of significant importance for astrophysics. It enables the observation of intermediate-mass black hole mergers, the issuance of early alerts for gravitational-wave events, and the exploration of the stochastic gravitational-wave background. The Cryogenic sub-Hz cROss torsion-bar detector with quantum NOn-demolition Speed meter (CHRONOS) is a proposed gravitational-wave detector based on a Sagnac speed-meter topology that uses torsion bars as test masses. Its prototype design aims to achieve a strain sensitivity of $3 \times 10^{-18}~\mathrm{Hz}^{-1/2}$ at 1~Hz and thus enable the detection of $\mathcal{O}(10^4),M_\odot$ intermediate-mass black hole mergers at 100~Mpc with a signal-to-noise ratio of 3. We show that the torsion-bar-based speed meter can suppress noise originating from laser intensity fluctuations by canceling the net torque on the bar and by using a balanced homodyne readout. We further present, for the first time, an analytic intensity-noise model for a gravitational-wave detector employing a torsion-bar Sagnac speed-meter configuration. Using this model, we evaluate the expected performance of a 2.5~m arm-length CHRONOS prototype. The projected laser-intensity noise is $2.9 \times 10^{-20}~\mathrm{Hz}^{-1/2}$ at 1~Hz, which is sufficiently low to allow the detection of binary intermediate-mass black hole mergers.

AG-2025.10-1528

physics.ins-det

Estimation of the Inverse Compton Scattering Background in MeV Gamma-Gamma Collider

Ping Zhou, Meiyu Si, Yuanjie Bi, Illya Drebot, Yongsheng Huang

The MeV Gamma-Gamma Collider would provide a direct experimental platform for elastic light-by-light scattering ($γγ\to γγ$) and the Breit-Wheeler process with two real photons ($γγ\to e^+e^-$). A Monte Carlo code, the Genie Background Evaluation Tool (GBET), has been developed to fully simulate two successive inverse Compton scatterings in the linear regime, including $e^- + \text{laser} \to e^-+ γ$ and $e^- + γ\rightarrow e^- + γ$. GBET overcomes the inherent information loss in traditional luminosity-spectrum-based chain simulations, preserving full particle-level information and achieving higher physical fidelity. The effectiveness of the code is verified by benchmarking against the simulation results of CAIN. GBET shows that the event rate of background photons generated by the first inverse Compton scattering is $6.24 \times 10^7$/s, with energies below 18 eV; the second inverse Compton scattering generates background electrons at 51.99/s and photons at 0.99/s, both with energies below 11 MeV. In addition, Møller scattering contributes background electrons at 0.56/s with energies around 200 MeV. The count rates of background electrons and positrons originating from the Breit-Wheeler process are 1312.2/s and 1314.3/s, respectively, with energy distributions ranging from 511 to 720 keV.

AG-2025.09-524

physics.ins-det

A Passive UV-Based System for Discharging the Test Masses of Ground Based Gravitational Wave Detectors

Saps Buchman, Suwen Wang, Shallendar Saraf

We present a passive ultraviolet charge management system for the fused silica test masses in ground-based laser interferometric gravitational wave detectors. The system uses photoelectron emission from low work-function gold coatings illuminated by 275 to 285 nm UV light to neutralize unwanted electric charges on the electrically floating test masses, maintaining them at zero potential relative to surrounding components. Two implementation schemes are described: 1. distributed discharge tabs illuminated by UV LEDs mounted at the eight surrounding earthquake stops, and 2. a conductively linked tab design enabling a centralized discharge on the test mass barrel, with potential extension to annular coatings around the high-reflectivity and anti-reflective surfaces. Experimental results show photoelectric currents greater or equal to 10 pA for 1.0 mW of incident UV, enabling discharge rates greater than 10V/s for a 1 pF capacitance. With 0.2 mW UV power, charge neutralization to less or equal to 1 pC can be achieved in 5 to 75 minutes. This technique offers a vacuum-compatible alternative to ion sprayers, significantly reducing operational downtime. For the conductive-barrel configuration, we also propose a balanced electrostatic actuator using four parallel-plate capacitors for combined control of TM axial displacement, tilt, and azimuth, with reduced drive voltages.

AG-2025.09-1220

physics.ins-det

Toward precision physics tests with future COHERENT detectors

M. Atzori Corona, M. Cadeddu, N. Cargioli, F. Dordei, C. Giunti, R. Pavarani

We present a comprehensive sensitivity study of future CE$ν$NS detectors, focusing on a cryogenic cesium iodide detector and a tonne-scale liquid argon one, currently being developed by the COHERENT Collaboration. These setups will enable precision measurements of the weak mixing angle at low energies and allow accurate extraction of the neutron nuclear distribution radius. We also demonstrate that next-generation detectors will place constraints on the neutrino charge radius comparable to or better than current global fits. In addition, we explore the sensitivity to non standard neutrino electromagnetic properties, such as magnetic moments and millicharges, as well as new mediators. These findings reinforce the role of CE$ν$NS experiments in the upcoming precision era, with future detectors playing a key role in advancing our understanding of neutrino interactions and electroweak physics at low energies.

AG-2025.08-1408

physics.ins-det

Mineral Detection of Neutrinos and Dark Matter 2025 Proceedings

Shigenobu Hirose, Patrick Stengel, Natsue Abe, Daniel Ang, Lorenzo Apollonio, Gabriela R. Araujo, Yoshihiro Asahara, Laura Baudis, Pranshu Bhaumik, Nathaniel Bowden, Joseph Bramante, Lorenzo Caccianiga, Mason Camp, Qing Chang, Jordan Chapman, Reza Ebadi, Alexey Elykov, Anna Erickson, Valentin Fondement, Katherine Freese, Shota Futamura, Claudio Galelli, Andrew Gilpin, Takeshi Hanyu, Noriko Hasebe, Adam A. Hecht, Samuel C. Hedges, Shunsaku Horiuchi, Yasushi Hoshino, Patrick Huber, Yuki Ido, Yohei Igami, Yuto Iinuma, Vsevolod Ivanov, Igor Jovanovic, Ayuki Kamada, Takashi Kamiyama, Takenori Kato, Yoji Kawamura, Giti A. Khodaparast, Yui Kouketsu, Yukiko Kozaka, Emilie M. LaVoie-Ingram, Matthew Leybourne, Gavishta Liyanage, Brenden A. Magill, Paolo Magnani, William F. McDonough, Katsuyoshi Michibayashi, Naoki Mizutani, Kohta Murase, Tatsuhiro Naka, Taiki Nakashima, Kenji Oguni, Mariano Guerrero Perez, Noriaki Sakurai, Lukas Scherne, Maximilian Shen, Joshua Spitz, Kai Sun, Katsuhiko Suzuki, Koichi Takamiya, Jiashen Tang, Erwin H. Tanin, Ethan Todd, Atsuhiro Umemoto, Keegan Walkup, Ronald Walsworth, Alexis M. Willson, Norihiro Yamada, Seiko Yamasaki, Wen Yin, Akihiko Yokoyama

The third ``Mineral Detection of Neutrinos and Dark Matter'' (MD$ν$DM'25) meeting was held May 20-23, 2025 in Yokohama, Japan, hosted by the Yokohama Institute for Earth Sciences, Japan Agency for Marine-Earth Science and Technology (JAMSTEC). These proceedings compile contributions from the workshop and update the progress of mineral detector research. MD$ν$DM'25 was the third such meeting, following the first in October of 2022 held at the IFPU in Trieste, Italy and the second in January of 2024 hosted by the Center for Neutrino Physics at Virginia Tech in Arlington, USA. Mineral detectors record and retain damage induced by nuclear recoils in synthetic or natural mineral samples. The damage features can then be read out by a variety of nano- and micro-scale imaging techniques. Applications of mineral detectors on timescales relevant for laboratory experiments include reactor neutrino monitoring and dark matter detection, with the potential to measure the directions as well as the energies of the induced nuclear recoils. For natural mineral detectors which record nuclear recoils over geological timescales, reading out even small mineral samples could be sensitive to rare interactions induced by astrophysical neutrinos, cosmic rays, dark matter and heavy exotic particles. A series of mineral detectors of different ages could measure the time evolution of these fluxes, offering a unique window into the history of our solar system and the Milky Way. Mineral detector research is highly multidisciplinary, incorporating aspects of high energy physics, condensed matter physics, materials science, geoscience, and AI/ML for data analysis. Although realizing the scientific potential of mineral detectors poses many challenges, the MD$ν$DM community looks forward to the continued development of mineral detector experiments and the possible discoveries that mineral detectors could reveal.

AG-2025.08-246

physics.ins-det

A Long-Baseline Atom Interferometer at CERN LHC Point 4: Implementation Study

G. Arduini, O. Buchmüller, T. A. Bud, S. Calatroni, O. Crespo-Lopez, A. Devienne, J. Ellis, T. Hakulinen, A. Infantino, D. Lafarge, A. P. Marion

Building on the feasibility study in CERN-PBC Report-2018-002 (Arduini et al. 2018), this report supported by the Physics Beyond Colliders (PBC) Study Group describes the technical implementation of modifications to the PX46 shaft at LHC Point 4 during LS3 (June 2026 - June 2030) that would enable it to accommodate the installation and operation of a vertical long-baseline Atom Interferometer during Run 4 without affecting LHC operations. We specify in detail the necessary civil-engineering work, installation of bespoke radiation shielding, deployment of access-control systems and safety alarms, and design of a mobile elevator platform. Our comprehensive technical assessment identifies no fundamental obstacles or showstoppers to implementation. Refined cost estimates and a critical-path schedule confirm that, from formal approval, all interventions can be completed within a 1.5-year window. These preparations would ensure seamless, concurrent operation of the Atom Interferometer experiment and the HL-LHC, with all technical challenges successfully addressed through established engineering solutions.

AG-2025.08-175

physics.ins-det

Einstein Telescope: Ferromagnetic Shielding for Magnetic Noise Mitigation

Federico Armato, Barbara Garaventa, Andrea Chincarini

The Einstein Telescope is the next-generation gravitational wave interferometer which, compared to current detectors, will enable the observation of gravitational signals at lower frequencies with a sensitivity improved by approximately two orders of magnitude. Achieving such exceptional sensitivity requires minimizing all sources of noise. In the low-frequency regime, magnetic noise is one of the dominant. This article examines the effectiveness and limitations of a passive mitigation technique: ferromagnetic shielding.

AG-2025.08-091

physics.ins-det

Mechanical Characterisation of Silicon for the ETpathfinder Test Masses

Guido Alex Iandolo, Alex Amato, Gianpietro Cagnoli, Alessandro Delmonte, Jan-Simon Hennig, Margot Hennig, Sebastian Steinlechner, Janis Wöhler, Stefan Hild, Jessica Steinlechner

The next generation of gravitational-wave detectors, such as the Einstein Telescope, is designed to reduce noise in a wide band of frequencies compared to the current generation, through the use of new technologies. ETpathfinder, designed as an R&D facility for these technologies, is a prototype for which the mirrors were chosen to be made of crystalline silicon, produced by the Leibniz-Institut für Kristallzüchtung. This material choice was made to pave the way for a low thermal noise level at cryogenic temperatures in the Einstein Telescope. This paper shows the mechanical loss of silicon designated to become the test masses for ETpathfinder in the range between room temperature and 53K. In addition, the effect of the anisotropic nature of silicon on the measurement procedure is addressed. Predictions are made of the contribution of the mirror substrate material to the overall ETpathfinder noise budget.

AG-2025.07-1503

physics.ins-det

SPLENDOR: a novel detector platform to search for light dark matter with narrow-gap semiconductors

P. Abbamonte, A. Albert, D. S. M. Alves, J. Anczarski, T. Aralis, T. U. Böhm, C. Boyd, J. Chen, P. -H. Chu, M. S. Cook, C. W. Fink, M. L. Graesser, Y. Kahn, C. S. Kengle, T. Kucinski, N. A. Kurinsky, C. Lane, A. Leder, R. Massarczyk, A. Mazumdar, S. J. Meijer, W. Nie, E. A. Peterson, A. Phipps, F. Ronning, P. F. S. Rosa, I. Rydstrom, N. S. Sirica, Z. J. Smith, K. Stifter, S. M. Thomas, S. L. Watkins, B. A. Young, J. -X. Zhu

We present the design and current status of SPLENDOR, a novel detector platform that combines narrow-gap semiconductor targets with low-noise charge readout to achieve sensitivity to dark matter energy deposits well below the eV scale. SPLENDOR is designed to be a modular and scalable system able to accommodate different target materials and signal readout technologies. SPLENDOR's present strategy entails: (i) the use of strongly correlated f-electron semiconductors with anisotropic electronic structures to enable not only sub-eV energy thresholds, but also directional sensitivity to the incoming dark matter flux, allowing for signal-background discrimination via daily modulation, and (ii) custom charge readout based on cryogenic high-electron-mobility transistor (cryoHEMT) amplifiers approaching single-electron resolution. We report on the selection and characterization of Eu$_5$In$_2$Sb$_6$ as the target material for SPLENDOR's first prototype detector, as well as the development and calibration of the prototype amplifier chain, achieving a measured charge resolution of 20$\pm$7 electrons in silicon test samples, consistent with predicted performance. This provides a demonstration of the detector architecture, which is now ready for deployment in a dark matter search campaign to deliver SPLENDOR's first science results. Finally, we present estimates of sensitivity reach in the parameter space of athermally produced relic dark matter under high- and low-background environments, and for various amplifier technology upgrades with increasing performance, including planned quantum sensing upgrades in order to achieve our ultimate goal of sub-electron resolution in optimized systems. SPLENDOR provides a novel approach to dark matter direct detection, combining quantum sensing with material's design to open new avenues of exploration in the sub-MeV mass range of dark matter parameter space.

AG-2025.07-1323

physics.ins-det

Muon Signal Charge in the Underground Muon Detector of AugerPrime

Marina Scornavacche

The Underground Muon Detector of the Pierre Auger Observatory features a calorimetric detection mode that estimates the number of muons based on signal charge measurements. This contribution provides an overview of the calibration procedure, revisiting the previously published strategy and identifying a bias introduced by the triggers used to estimate the mean charge deposited by a vertical muon. We demonstrate that calibrating underground detectors requires careful consideration of the interactions of penetrating particles through matter. In devices based on plastic scintillators, energy deposition, and thus the recorded charge, is significantly affected by knock-on electron production in the surrounding ground as muons traverse the medium. To mitigate this effect, we propose a new calibration strategy that ensures an unbiased muon estimator. This approach is applied to data collected from 2019 to 2024.

AG-2025.07-1275

physics.ins-det

A Prototype Hybrid Mode Cavity for Heterodyne Axion Detection

Zenghai Li, Kevin Zhou, Marco Oriunno, Asher Berlin, Sergio Calatroni, Raffaele Tito D'Agnolo, Sebastian A. R. Ellis, Philip Schuster, Sami G. Tantawi, Natalia Toro

In the heterodyne approach to axion detection, axion dark matter induces transitions between two modes of a microwave cavity, resulting in a parametrically enhanced signal power. We describe the fabrication and characterization of a prototype normal conducting cavity specifically optimized for heterodyne detection. Corrugations on the cavity walls support linearly polarized hybrid modes which maximize the signal power while strongly suppressing noise. We demonstrate tuning mechanisms which allow one mode's frequency to be scanned across a 4 MHz range, while suppressing cross-coupling noise by at least 80 dB. A future superconducting cavity with identical geometry to our prototype would have the potential to probe orders of magnitude beyond astrophysical bounds.

AG-2025.06-726

physics.ins-det

Test mass charge management in the detection of gravitational waves in space based on UV micro-LED

Yuandong Jia, Zhihao Zhang, Yinbowen Zhang, Yuning Gu, Suwen Wang, Guozhi Chai, Zemin Zhang, Yi Zhang, Shanduan Zhang, Hongqing Huo, Zongfeng Li, Pengfei Tian, Yun Kau Lau

As an alternative to the ultraviolet light emitting diode(UV LED), the feasibility of utilizing UV micro-LED in the charge management in the detection of gravitational waves in space is experimentally studied. Compared with UV LED, micro-LED is more compact in size, has better current spreading, faster response time and longer operating life. Performance characteristics of micro-LEDs were measured, with peak wavelength of 254 nm, 262 nm, 274 nm, and 282 nm for each respective micro-LED, and the photoelectric effect was demonstrated. The effectiveness of micro-LED based charge management experiments were demonstrated using above micro-LEDs mounted on a cubical test mass, and different discharge rates were achieved by varying the drive current and duty cycle using pulse width modulation(PWM). Laboratory data was also shown to demonstrate the space qualification of the micro-LED device, the key electrical and optical characteristics of the micro-LEDs showed less than 5% variation. The results of the qualification bring the micro-LED device Technology Readiness Level(TRL) to TRL-5. TRL-6 will be reached provided additional radiation and thermal tests are conducted and in a position ready to be flown and further tested in space.

AG-2025.06-1533

physics.ins-det

CaloHadronic: a diffusion model for the generation of hadronic showers

Thorsten Buss, Frank Gaede, Gregor Kasieczka, Anatolii Korol, Katja Krüger, Peter McKeown, Martina Mozzanica

Simulating showers of particles in highly-granular calorimeters is a key frontier in the application of machine learning to particle physics. Achieving high accuracy and speed with generative machine learning models can enable them to augment traditional simulations and alleviate a major computing constraint. Recent developments have shown how diffusion based generative shower simulation approaches that do not rely on a fixed structure, but instead generate geometry-independent point clouds, are very efficient. We present a transformer-based extension to previous architectures which were developed for simulating electromagnetic showers in the highly granular electromagnetic calorimeter of the International Large Detector, ILD. The attention mechanism now allows us to generate complex hadronic showers with more pronounced substructure across both the electromagnetic and hadronic calorimeters. This is the first time that machine learning methods are used to holistically generate showers across the electromagnetic and hadronic calorimeter in highly granular imaging calorimeter systems.

AG-2025.06-1469

physics.ins-det

First direct search for light dark matter interactions in a transition-edge sensor

Christina Schwemmbauer, Guy Daniel Hadas, Yonit Hochberg, Katharina-Sophie Isleif, Friederike Januschek, Benjamin V. Lehmann, Axel Lindner, Adriana E. Lita, Manuel Meyer, Gulden Othman, Elmeri Rivasto, José Alejandro Rubiera Gimeno

We propose the use of transition-edge sensor (TES) single-photon detectors as a simultaneous target and sensor for direct dark matter searches, and report results from the first search of this kind. We perform a 489 h science run with a TES device optimized for the detection of 1064 nm photons, with a mass of ~0.2 ng and an energy threshold of ~0.3 eV, and set new limits on dark matter interactions with both electrons and nucleons for dark matter with mass below the MeV scale. With their excellent energy resolution, TESs enable search strategies that are complementary to recent results from superconducting nanowire single-photon detectors and kinetic inductance detectors. We show that next-generation TES arrays hold promise to probe new regions of light dark matter parameter space.

AG-2025.06-572

physics.ins-det

New modeling of the stray light noise in the main arms of the Einstein Telescope

M. Andrés-Carcasona, J. Grandes Umbert, D. González-Lociga, M. Martínez, Ll. M. Mir, H. Yamamoto

Stray light represents a significant noise source for gravitational wave detectors, requiring an accurate modeling and mitigation to preserve the experiment's sensitivity. In this article, we present an updated and improved analysis of the stray-light induced noise in the Einstein Telescope main arm. The results presented here supersede previous studies taking into account a number of improvements, including baffle clipping effects, new numerical calculations for computing diffraction contributions and the influence of baffle edge serrations. Results are presented for both triangular and L-shaped configurations for the experiment. Furthermore, in the case of the triangular configuration, we examine non-ideal optical cavity conditions, such as beam offsets and misalignments, and the presence of point absorbers in the mirrors, which can increase scattered light noise. This can be translated into future stringent constraints on the design and operating parameters of the interferometer, thus facilitating to achieve its sensitivity targets.

AG-2025.06-556

physics.ins-det

An array of bulk-acoustic-wave sensors as a high-frequency antenna for gravitational waves

G. Albani, M. Borghesi, L. Canonica, R. Carobene, F. De Guio, M. Faverzani, E. Ferri, R. Gerosa, A. Ghezzi, A. Giachero, C. Gotti, D. Labranca, L. Mariani, A. Nucciotti, G. Pessina, D. Rozza, T. Tabarelli de Fatis

In their simplest form, bulk acoustic wave (BAW) devices consist of a piezoelectric crystal between two electrodes that transduce the material's vibrations into electrical signals. They are adopted in frequency control and metrology, with well-established standards at frequencies of 5~MHz and above. Their use as a resonant-mass strain antenna for high-frequency gravitational waves has been recently proposed (Goryachev and Tobar, 2014). The estimated power spectral density sensitivity at the resonant frequencies is of the order of $10^{-21}\, \textrm{strain}/\sqrt{\textrm{Hz}}$. In this paper, after introducing the science opportunity and potential of gravitational wave detection with BAWs, we describe the two-stage BAUSCIA project plan to build a multimode antenna based on commercial BAWs, followed by an optimized array of custom BAWs. We show that commercially available BAWs already provide sensitivity comparable to current experiments around 10~MHz. Finally, we outline options for optimization of custom devices to improve sensitivity in an unexplored region, probe multiple frequencies between 0.1 and 10 MHz, and target specific signals, such as post-merger emission from neutron stars or emission from various dark matter candidates.

AG-2025.06-1183

physics.ins-det

Sensitivity of a Gigahertz Fabry-Pérot Resonator for Axion Dark Matter Detection

Jacob Egge, Manuel Meyer

Axions are hypothetical pseudo-Nambu Goldstone bosons that could explain the observed cold dark matter density and solve the strong CP problem of quantum chromodynamics (QCD). Haloscope experiments commonly employ resonant cavities to search for a conversion of axion dark matter into photons in external magnetic fields. As the expected signal power degrades with increasing frequency, this approach becomes challenging at frequencies beyond tens of Gigahertz. Here, we propose a novel haloscope design based on an open Fabry-Pérot resonator. Operating a small-scale resonator at cryogenic temperatures and at modest magnetic fields should already lead to an unparalleled sensitivity for photon-axion couplings $g_{aγ} \gtrsim 3\times10^{-12}\,\mathrm{GeV}^{-1}$ at 35GHz. We demonstrate how this sensitivity could be further improved using graded-phase mirrors and sketch possibilities to probe benchmark models of the QCD axion.

AG-2025.05-835

physics.ins-det

Complete Catalog of Laser Locking Configurations for LISA

Gerhard Heinzel, Javier Álvarez-Vizoso, Miguel Dovale-Álvarez

The Laser Interferometer Space Antenna (LISA) will enable direct observations of low-frequency gravitational waves, offering unprecedented insight into astrophysical and cosmological phenomena. LISA's heterodyne interferometric measurement system requires phase-locking five of its six onboard lasers with tunable frequency offsets to ensure that all beatnotes remain within the metrology system's operational range, despite Doppler-induced frequency shifts. The selection of these offset frequencies -- collectively forming a frequency plan -- is a complex optimization problem constrained by the spacecraft's orbital dynamics and instrument limitations. While previous work established an algorithmic solution for deriving time-dependent frequency plans, this study takes a complementary approach by systematically analyzing and cataloging all possible laser locking configurations. We present an automated method to explore, validate, and classify viable locking schemes, identifying 36 unique non-frequency-swapping configurations and 72 additional frequency-swapping configurations for an arbitrary choice of primary laser. This exhaustive classification provides a foundation for frequency planning across the full range of operational scenarios.

AG-2025.05-722

physics.ins-det

Proof-of-Principle Experiment on a Displacement-Noise-Free Neutron Interferometer for Gravitational Wave Detection

Shoki Iwaguchi, Takuhiro Fujiie, Taro Nambu, Masaaki Kitaguchi, Yutaka Yamagata, Kenji Mishima, Atsushi Nishizawa, Tomohiro Ishikawa, Kenji Tsuji, Kurumi Umemura, Kazuhiro Kobayashi, Takafumi Onishi, Keiko Kokeyama, Hirohiko Shimizu, Yuta Michimura, Seiji Kawamura

The displacement-noise-free interferometer (DFI) is designed to eliminate all displacement-induced noise while retaining sensitivity to gravitational wave (GW) signals. Ground-based DFIs suffer from physical arm-length limitations, resulting in poor sensitivity at frequencies below 1 kHz. To address this, previous research introduced a neutron-based DFI, which replaces laser light with neutrons and achieves exceptional sensitivity down to a few hertz. In this study, we conducted a proof-of-principle experiment using a pulsed neutron source at the Japan Proton Accelerator Research Complex (J- PARC). Despite practical constraints that led to deviations from the ideal experimental design, we optimized the setup and developed a novel analysis method that successfully cancels displacement noise while preserving simulated GW signals. This work presents the first successful demonstration of a neutron DFI and a neutron interferometer for GW detection.

AG-2025.05-1495

physics.ins-det

Detector Designs for Frontier Measurements in Neutrino and Collider Physics in the 21st Century

Wonyong Chung

The last energy-frontier lepton collider, LEP, established several limits that still hold today. A key one is the counting of three light neutrino species from the invisible decay width of the Z boson. From a collider calorimetry standpoint, the missing energy is an invitation to design an experiment to directly measure the neutrino mass. We present a new type of EM spectrometer which leverages the first adiabatic invariant in magnetic gradient drift to achieve exponentially bounded resolution in a highly compact and scalable format, enabling the PTOLEMY experiment to not only measure the neutrino mass at the tritium endpoint, but one day directly detect the Cosmic Neutrino Background. Meanwhile, the next lepton collider promises to expose the Higgs self-coupling and complete the accounting of lepton universality. We present a dual-readout, segmented crystal calorimeter for future collider detectors, combining new hardware capabilities with novel AI/ML reconstruction techniques towards realizing a detector that must definitively and unambiguously surpass its predecessors. Together, these studies confront the most pressing challenges for 21st century particle physics experiments to achieve the sensitivities needed to bridge the gap between the largest and smallest scales of reality.

AG-2025.05-474

physics.ins-det

Development of a polarimetry method toward in-situ substrate birefringence characterization of ground-based gravitational wave detectors

Satoshi Tanioka, Terri Pearce, Keiko Kokeyama

Improving the sensitivity of gravitational wave detectors is necessary to enrich scientific outcome of gravitational wave astronomy. Birefringence in test mass mirrors of gravitational wave detectors can become an important factor for both current and next-generation gravitational wave detectors to achieve improved performance. In-situ birefringence characterization can become an essential diagnostic tool for detector performance, and needs to be established. We report a possible in-situ birefringence characterization method and its experimental results with a tabletop setup. The scheme proposed and demonstrated in this paper can be used as a diagnostic tool in large-scale gravitational wave detectors. We also discuss possible technological developments toward implementation in future gravitational wave detectors.

AG-2025.04-1557

physics.ins-det

Modeling frequency instability in high-quality resonant experiments

Hao-Ran Cui, Saarik Kalia, Zhen Liu

Modern resonant sensing tools can achieve increasingly high quality factors, which correspond to extremely narrow linewidths. In such systems, time-variation of the resonator's natural frequency can potentially impact its ability to accumulate power and its resulting sensitivity. One such example is the Dark SRF experiment, which utilizes superconducting radio frequency (SRF) cavities with quality factors of $Q\sim10^{10}$. Microscopic deformations of the cavity lead to stochastic jittering of its resonant frequency with amplitude 20 times its linewidth. Naively, one may expect this to lead to a large suppression in accumulated power. In this work, we study in detail the effects of frequency instability on high-quality resonant systems, utilizing the Dark SRF experiment as a case study. We show that the timescale of jittering is crucial to determining its effect on power accumulation. Namely, when the resonant frequency varies sufficiently quickly, the system accumulates power as if there were no jittering at all. This implies that the sensitivity of a jittering resonator is comparable to that of a stable resonator. In the case of Dark SRF, we find that jittering only induces a $\sim 10\%$ loss in power. Our results allow the dark-photon exclusion bound from Dark SRF's pathfinder run to be refined, leading to a constraint that is an order of magnitude stronger than previously reported (corresponding to a signal-to-noise ratio which is four orders of magnitude larger). This result represents the world-leading constraint on dark photons over a wide range of masses below $6\,\rm μeV$ and translates to the best laboratory-based limits on the photon mass $m_γ<2.9\times 10^{-48}\,\rm g$.

AG-2025.04-1305

physics.ins-det

MATHUSLA: An External Long-Lived Particle Detector to Maximize the Discovery Potential of the HL-LHC

Branden Aitken, Cristiano Alpigiani, Juan Carlos Arteaga-Velázquez, Mitchel Baker, Kincso Balazs, Jared Barron, Brian Batell, Austin Batz, Yan Benhammou, Tamara Alice Bud, Karen Salomé Caballero-Mora, John Paul Chou, David Curtin, Albert de Roeck, Miriam Diamond, Mariia Didenko, Keith R. Dienes, William Dougherty, Liam Andrew Dougherty, Marco Drewes, Sameer Erramilli, Erez Etzion, Arturo Fernández Téllez, Grace Finlayson, Oliver Fischer, Jim Freeman, Jonathan Gall, Ali Garabaglu, Bhawna Gomber, Stephen Elliott Greenberg, Jaipratap Singh Grewal, Zoe Hallman, Bahgat Hassan, Yuekun Heng, Keegan Humphrey, Trystan Humphrey, Graham D. Kribs, Alex Lau, Jiahao Liao, Zhen Liu, Giovanni Marsella, Matthew McCullough, David McKeen, Patrick Meade, Caleb Miller, Gilad Mizrachi, O. G. Morales-Olivares, David Morrissey, Abdulrahman Ahmed Morsy, John Osborn, Gabriel Owh, Michalis Panagiotou, Mason Proffitt, Runze Ren, Steven H. Robertson, Mario Rodríguez-Cahuantzi, Heather Russell, Victoria Sánchez, Halil Saka, Mamoksh Samra, Rodney Schnarr, Jessie Shelton, Yiftah Silver, Daniel Stolarski, Martin A. Subieta Vasquez, Sanjay Kumar Swain, Steffie Ann Thayil, Brooks Thomas, Emma Torro, Yuhsin Tsai, Bennett Winnicky-Lewis, Igor Zolkin, Jose Zurita

We present the current status of the MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles) long-lived particle (LLP) detector at the HL-LHC, covering the design, fabrication and installation at CERN Point 5. MATHUSLA40 is a 40 m-scale detector with an air-filled decay volume that is instrumented with scintillator tracking detectors, to be located near CMS. Its large size, close proximity to the CMS interaction point and about 100 m of rock shielding from LHC backgrounds allows it to detect LLP production rates and lifetimes that are one to two orders of magnitude beyond the ultimate reach of the LHC main detectors. This provides unique sensitivity to many LLP signals that are highly theoretically motivated, due to their connection to the hierarchy problem, the nature of dark matter, and baryogenesis. Data taking is projected to commence with the start of HL-LHC operations. We summarize the new 40m design for the detector that was recently presented in the MATHUSLA Conceptual Design Report, alongside new realistic background and signal simulations that demonstrate high efficiency for the main target LLP signals in a background-free HL-LHC search. We argue that MATHUSLA's uniquely robust expansion of the HL-LHC physics reach is a crucial ingredient in CERN's mission to search for new physics and characterize the Higgs boson with precision.

AG-2025.03-1688

physics.ins-det

Conceptual Design Report for the MATHUSLA Long-Lived Particle Detector near CMS

Branden Aitken, Cristiano Alpigiani, Juan Carlos Arteaga-Velázquez, Mitchel Baker, Kincso Balazs, Jared Barron, Brian Batell, Austin Batz, Yan Benhammou, Tamara Alice Bud, Karen Salomé Caballero-Mora, John Paul Chou, David Curtin, Albert de Roeck, Miriam Diamond, Mariia Didenko, Keith R. Dienes, William Dougherty, Liam Andrew Dougherty, Marco Drewes, Sameer Erramilli, Erez Etzion, Arturo Fernández Téllez, Grace Finlayson, Oliver Fischer, Jim Freeman, Jonathan Gall, Ali Garabaglu, Bhawna Gomber, Stephen Elliott Greenberg, Jaipratap Singh Grewal, Zoe Hallman, Bahgat Hassan, Yuekun Heng, Keegan Humphrey, Trystan Humphrey, Graham D. Kribs, Alex Lau, Jiahao Liao, Zhen Liu, Giovanni Marsella, Matthew McCullough, David McKeen, Patrick Meade, Caleb Miller, Gilad Mizrachi, O. G. Morales-Olivares, David Morrissey, Abdulrahman Ahmed Morsy, John Osborn, Gabriel Owh, Michalis Panagiotou, Mason Proffitt, Runze Ren, Steven H. Robertson, Mario Rodríguez-Cahuantzi, Heather Russell, Victoria Sánchez, Halil Saka, Mamoksh Samra, Rodney Schnarr, Jessie Shelton, Yiftah Silver, Daniel Stolarski, Martin A. Subieta Vasquez, Sanjay Kumar Swain, Steffie Ann Thayil, Brooks Thomas, Emma Torro, Yuhsin Tsai, Bennett Winnicky-Lewis, Igor Zolkin, Jose Zurita

We present the Conceptual Design Report (CDR) for the MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles) long-lived particle detector at the HL-LHC, covering the design, fabrication and installation at CERN Point 5. MATHUSLA is a 40 m-scale detector with an air-filled decay volume that is instrumented with scintillator tracking detectors, to be located near CMS. Its large size, close proximity to the CMS interaction point and about 100 m of rock shielding from HL-LHC backgrounds allows it to detect LLP production rates and lifetimes that are one to two orders of magnitude beyond the ultimate sensitivity of the HL-LHC main detectors for many highly motivated LLP signals. Data taking is projected to commence with the start of HL-LHC operations. We present a new 40m design for the detector: its individual scintillator bars and wavelength-shifting fibers, their organization into tracking layers, tracking modules, tower modules and the veto detector; define a high-level design for the supporting electronics, DAQ and trigger system, including supplying a hardware trigger signal to CMS to record the LLP production event; outline computing systems, civil engineering and safety considerations; and present preliminary cost estimates and timelines for the project. We also conduct detailed simulation studies of the important cosmic ray and HL-LHC muon backgrounds, implementing full track/vertex reconstruction and background rejection, to ultimately demonstrate high signal efficiency and $\ll 1$ background event in realistic LLP searches for the main physics targets at MATHUSLA. This sensitivity is robust with respect to detector design or background simulation details. Appendices provide various supplemental information.

AG-2025.03-1448

physics.ins-det

Low-Energy Backgrounds in Solid-State Phonon and Charge Detectors

Daniel Baxter, Rouven Essig, Yonit Hochberg, Margarita Kaznacheeva, Belina von Krosigk, Florian Reindl, Roger K. Romani, Felix Wagner

Solid-state phonon and charge detectors probe the scattering of weakly interacting particles, such as dark matter and neutrinos, through their low recoil thresholds. Recent advancements have pushed sensitivity to eV-scale energy depositions, uncovering previously-unseen low-energy excess backgrounds. While some arise from known processes such as thermal radiation, luminescence, and stress, others remain unexplained. This review examines these backgrounds, their possible origins, and parallels to low-energy effects in solids. Their understanding is essential for interpreting particle interactions at and below the eV-scale.

AG-2025.03-1383

physics.ins-det

Enhancing DUNE Physics Sensitivity with Light and Charge Calorimetry

Jogesh Rout, Suchismita Sahoo

We investigate the potential of light calorimetry in liquid argon time projection chambers and its intrinsic self compensation properties, emphasizing its advantages alongside conventional charge calorimetry. Previous studies have demonstrated that light calorimetry can achieve energy resolution comparable to advanced charge based techniques, particularly for GeV scale neutrinos. In this work, we explore the complementarity of light calorimetry with charge calorimetry for precision measurements of key physics parameters in the DUNE, including CP violation (CPV) and mass hierarchy determination. While charge calorimetry provides superior resolution in CP phase measurements, light calorimetry independently offers significant insights into CPV and mass hierarchy sensitivities. Furthermore, our exposure versus CPV sensitivity studies indicate that the $5σ$ discovery potential is reached faster using light and charge calorimetry than with the traditional TDR based reconstruction methods. These findings highlight the promising role of light calorimetry as a simple yet effective reconstruction method, serving as a complementary approach to enhance the physics capabilities of DUNE.

AG-2025.03-487

physics.ins-det

High-frequency magnetic response measurement of test mass with a fluxgate magnetometer for gravitational wave detection

Yuanyang Yu, Butian Zhang, Shengxin Lin, Jianping Liang, Donghua Pan, Shun Wang, Ze-Bing Zhou

For space-borne gravitational wave detectors,such as LISA and TianQin ,the disturbance caused by the coupling of test masses and the external magnetic fields is one of the main sources of the residual acceleration noise. Although the detection frequency band is from 0.1 mHz to 1 Hz, magnetic fields with frequencies higher than 1 Hz can still contribute to the noise through down conversion effect. Therefore, it is necessary to measure the AC magnetic susceptibility or magnetic response of the test mass at higher frequency for the evaluation of the magnetic noise. In this work, we propose a magnetic field response measurement method by directly probing the induced magnetic field of the test mass placed in a spatially uniform magnetic field. The frequency can be measured up to 1500 Hz, satisfying the requirement of space-borne gravitational wave detection.

AG-2025.02-682

physics.ins-det

An experimental platform for levitated mechanics in space

Jack Homans, Elliot Simcox, Jakub Wardak, Laura da Palma Barbara, Tim M. Fuchs, Rafael Muffato, Florence Concepcion, Andrei Dragomir, Christian Vogt, Peter Nisbet-Jones, Christopher Bridges, Hendrik Ulbricht

Conducting levitated mechanical experiments in extreme conditions has long been the aim of researchers, as it allows for the investigation of new fundamental physics phenomena. One of the great frontiers has been sending these experiments into the micro-g environment of space, with multiple proposals calling for such a platform. At the same time, levitated sensors have demonstrated a high sensitivity to external stimuli which will only improve in low-vibrational conditions. conditions This paper describes the development of a technology demonstrator for optical and magnetic trapping experiments in space. Our payload represents the first concrete step towards future missions with aims of probing fundamental physical questions: matter-wave interferometry of nanoparticles to probe the limits of macroscopic quantum mechanics, detection of Dark Matter candidates and gravitational waves to test physics beyond the Standard Model, and accelerometry for Earth-observation.

AG-2025.02-388

physics.ins-det

Adjustable picometer-stable interferometers for testing space-based gravitational wave detectors

Marcel Beck, Shreevathsa Chalathadka Subrahmanya, Oliver Gerberding

Space-based gravitational wave detectors, such as the Laser Interferometer Space Antenna (LISA), use picometer-precision laser interferometry to detect gravitational waves at frequencies from 1 Hz down to below 0.1 mHz. Laser interferometers used for on-ground prototyping and testing of such instruments are typically constructed by permanently bonding or gluing optics onto an ultra-stable bench made of low-expansion glass ceramic. This design minimizes temperature coupling to length and tilt, which dominates the noise at low frequencies due to finite temperature stability achievable in laboratories and vacuum environments. Here, we present the study of an alternative opto-mechanical concept where optical components are placed with adjustable and freely positionable mounts on an ultra-stable bench, while maintaining picometer length stability. With this concept, a given interferometer configuration can be realised very quickly due to a simplified and speed-up assembly process, reducing the realisation time from weeks or months to a matter of hours. We built a corresponding test facility and verified the length stability of our concept by measuring the length change in an optical cavity that was probed with two different locking schemes, heterodyne laser frequency stabilisation and Pound-Drever-Hall locking. We studied the limitations of both locking schemes and verified that the cavity length noise is below 1 pm/sqrt(Hz) for frequencies down to 3 mHz. We thereby demonstrate that our concept can simplify the testing of interferometer configurations and opto-mechanical components and is suitable to realise flexible optical ground support equipment for space missions that use laser interferometry, such as future space-based gravitational wave detectors and satellite geodesy missions.

AG-2025.01-1252

physics.ins-det

Tagging Efficiency Study of Incoherent Diffractive Vector Meson Production at the Second Interaction Region at the Electron-Ion Collider

Elke-Caroline Aschenauer, Alexander Bazilevsky, Alexander Jentsch, Jihee Kim, Alexander Kiselev, Brian Page, Zhoudunming Tu, Thomas Ullrich, Cheuk-Ping Wong

The Electron-Ion Collider (EIC) is an upcoming accelerator facility aimed at exploring the properties of quarks and gluons in nucleons and nuclei, shedding light on their structure and dynamics. The inaugural experimental apparatus, ePIC (electron-Proton and Ion Collider), is designed as a general purpose detector to address the NAS/NSAC physics program at the EIC. The wider EIC community is strongly supporting a second interaction region and associated second detector to enhance the full science program. In this study, we evaluate how the second interaction region and detector can be complementary to ePIC. The pre-conceptual layout of an interaction region for the second detector offers a secondary focus that provides better forward detector acceptance at scattering angles near $θ\sim 0$~mrad, which can specifically enhance the exclusive, tagging, and diffractive physics program. This article presents an analysis of a tagging program using the second interaction region layout with incoherent diffractive vector meson production. The potential for the second interaction region to provide improved vetoing capabilities for incoherent events to elucidate the coherent diffractive cross-section is evaluated. The capability to access the coherent diffractive cross-section is of prime importance for studying the spatial imaging of nucleons and nuclei.

AG-2025.01-163

physics.ins-det

A new dark matter direct search based on archaeological Pb

D. Alloni, G. Benato, P. Carniti, M. Cataldo, L. Chen, M. Clemenza, M. Consonni, G. Croci, I. Dafinei, F. A. Danevich, D. Di Martino, E. Di Stefano, N. Ferreiro Iachellini, F. Ferroni, F. Filippini, S. Ghislandi, A. Giachero, L. Gironi, P. Gorla, C. Gotti, D. L. Helis, D. V. Kasperovych, V. V. Kobychev, G. Marcucci, A. Melchiorre, A. Menegolli, S. Nisi, M. Musa, L. Pagnanini, L. Pattavina, G. Pessina, S. Pirro, O. G. Polischuk, S. Pozzi, M. C. Prata, A. Puiu, S. Quitadamo, M. P. Riccardi, M. Rossella, R. Rossini, F. Saliu, A. Salvini, A. P. Scherban, D. A. Solopikhin, V. I. Tretyak, D. Trotta, H. Yuan

The RES-NOVA project is an experimental initiative aimed at detecting neutrinos from the next galactic supernova using PbWO$_{4}$ cryogenic detectors, operated at low temperatures in a low-background environment. By utilizing archaeological lead (Pb) as the target material, RES-NOVA leverages its high radiopurity, large nuclear mass, and the natural abundance of $^{207}$Pb, making it well-suited for exploring both spin-independent and spin-dependent Dark Matter (DM) interactions via nuclear scattering. This work presents a background model developed for the RES-NOVA technology demonstrator and evaluates its implications for Dark Matter detection. Detailed calculations of nuclear matrix elements, combined with the unique properties of archaeological Pb, demonstrate RES-NOVA's potential as a complementary tool to existing direct detection experiments for studying Dark Matter interactions. The experiment will conduct DM searches over a broad mass range spanning 4 orders of magnitude, from sub-GeV/$c^2$ to TeV/$c^2$. In the most optimistic scenario, RES-NOVA is expected to probe DM-nucleon cross-sections down to 1$\times 10^{-43}$ cm$^2$ and 2$\times 10^{-46}$ cm$^2$ for candidates with masses of 2 GeV/$c^2$ and 20 GeV/$c^2$, respectively.

AG-2024.10-593

physics.ins-det

Demonstration of tilt sensing using a homodyne quadrature interferometric translational sensor

Koji Nagano, Karera Mori, Kiwamu Izumi

Future gravitational wave observation in space will demand improvement in the sensitivity of the local sensor for the drag-free control. This paper presents the proposal, design, and demonstration of a new laser interferometric sensor named Quadrature Interferometric Metrology of Translation and Tilt (QUIMETT) for the drag-free local sensor. QUIMETT enables simultaneous measurements of both translational displacement and tilts of a reflective object with a single interferometer package. QUIMETT offers a characteristic feature where the sensitivity to tilt is independent of the interference condition while maintaining the ability to measure the translational displacement for a range greater than the laser wavelength. The tilt-sensing function has been demonstrated in a prototype experiment. The tilt sensitivity remained unchanged in different interference conditions and stayed at 10 nrad/Hz$^{1/2}$ at 0.1 Hz.

AG-2024.10-1477

physics.ins-det

CaloChallenge 2022: A Community Challenge for Fast Calorimeter Simulation

Claudius Krause, Michele Faucci Giannelli, Gregor Kasieczka, Benjamin Nachman, Dalila Salamani, David Shih, Anna Zaborowska, Oz Amram, Kerstin Borras, Matthew R. Buckley, Erik Buhmann, Thorsten Buss, Renato Paulo Da Costa Cardoso, Anthony L. Caterini, Nadezda Chernyavskaya, Federico A. G. Corchia, Jesse C. Cresswell, Sascha Diefenbacher, Etienne Dreyer, Vijay Ekambaram, Engin Eren, Florian Ernst, Luigi Favaro, Matteo Franchini, Frank Gaede, Eilam Gross, Shih-Chieh Hsu, Kristina Jaruskova, Benno Käch, Jayant Kalagnanam, Raghav Kansal, Taewoo Kim, Dmitrii Kobylianskii, Anatolii Korol, William Korcari, Dirk Krücker, Katja Krüger, Marco Letizia, Shu Li, Qibin Liu, Xiulong Liu, Gabriel Loaiza-Ganem, Thandikire Madula, Peter McKeown, Isabell-A. Melzer-Pellmann, Vinicius Mikuni, Nam Nguyen, Ayodele Ore, Sofia Palacios Schweitzer, Ian Pang, Kevin Pedro, Tilman Plehn, Witold Pokorski, Huilin Qu, Piyush Raikwar, John A. Raine, Humberto Reyes-Gonzalez, Lorenzo Rinaldi, Brendan Leigh Ross, Moritz A. W. Scham, Simon Schnake, Chase Shimmin, Eli Shlizerman, Nathalie Soybelman, Mudhakar Srivatsa, Kalliopi Tsolaki, Sofia Vallecorsa, Kyongmin Yeo, Rui Zhang

We present the results of the "Fast Calorimeter Simulation Challenge 2022" - the CaloChallenge. We study state-of-the-art generative models on four calorimeter shower datasets of increasing dimensionality, ranging from a few hundred voxels to a few tens of thousand voxels. The 31 individual submissions span a wide range of current popular generative architectures, including Variational AutoEncoders (VAEs), Generative Adversarial Networks (GANs), Normalizing Flows, Diffusion models, and models based on Conditional Flow Matching. We compare all submissions in terms of quality of generated calorimeter showers, as well as shower generation time and model size. To assess the quality we use a broad range of different metrics including differences in 1-dimensional histograms of observables, KPD/FPD scores, AUCs of binary classifiers, and the log-posterior of a multiclass classifier. The results of the CaloChallenge provide the most complete and comprehensive survey of cutting-edge approaches to calorimeter fast simulation to date. In addition, our work provides a uniquely detailed perspective on the important problem of how to evaluate generative models. As such, the results presented here should be applicable for other domains that use generative AI and require fast and faithful generation of samples in a large phase space.

AG-2024.10-474

physics.ins-det

Gravitational Wave-Sensitive Photonic-Like Electronic Transport in Graphene for Efficient High-Frequency Gravitational Wave Detection

Shen Shen, Liangzhong Lin, Linfu Li, Jiang-Tao Liu, Xin Wu, Zhenhua Wu

High-frequency gravitational waves are crucial for understanding the very early universe and distinguishing between various cosmological models, but detecting them remains a significant challenge. We investigated the effects of high-frequency gravitational waves on photonic-like electronic transport in graphene. The results show that, unlike the influence of gravitational waves on the propagation of light, the influence of gravitational waves on photonic-like electronic transport can accumulate not only in real space but also in $k$-space. This makes photonic-like electronic transport under gravitational waves similar to the propagation of light in a medium where the refractive index varies dramatically due to gravitational waves, and with shorter wavelengths. As a result, the relative intensity variation in photonic-like electronic transport under gravitational waves exceeds that of a laser interferometer with the same arm length by six orders of magnitude. At low temperatures, the influence of phonons on photon-like transport in the context of high-frequency gravitational waves can be ignored. These findings indicate a strong interaction between gravitational waves and electron transport, which helps to deepen the understanding of the interaction between gravitational waves and matter, and provides a different method for detecting high-frequency gravitational waves.

AG-2024.10-472

physics.ins-det

Theoretical Characteristics of a three-point Roberts Linkage

Munetake Otsuka, Kohei Mitsuhashi, Ryutaro Takahashi, Yohei Nishino, Yoichi Aso, Takayuki Tomaru

The Roberts linkage is recognized for enabling long-period pendulum motion in a compact format. Utilizing this characteristic, we are developing a three-point Roberts linkage for vibration isolation systems, with an eye towards its potential contribution to the development of next-generation interferometric gravitational wave antennas. In this article, we derived the equations to determine the essential parameters when using this linkage as a vibration isolation system, namely the equivalent pendulum length and the relationship between translational motion of the center of mass and rigid body rotation, from size parameters. Additionally, we analyzed the behavior in response to various errors.

AG-2024.09-108

physics.ins-det

Dual balanced readout for scattered light noise mitigation in Michelson interferometers

André Lohde, Daniel Voigt, Oliver Gerberding

Ground-based gravitational wave detectors use laser interferometry to detect the minuscule distance change between test masses caused by gravitational waves. Stray light that scatters back into the interferometer causes transient signals that can cover the same frequency range as a potential gravitational wave signal. Scattered light noise is a potentially limiting factor in current and future detectors thus making it relevant to find new ways to mitigate it. Here, we demonstrate experimentally a technique for the subtraction of scattered light noise from the displacement readout of a Michelson interferometer. It is based on using a balanced homodyne detector at both the symmetric and the antisymmetric port. While we have been able to demonstrate a noise reduction of \SI{13.2}{\decibel}, the readout scheme seems to be only limited by the associated noise couplings, with no theoretical limit to the scattered light suppression itself other than shot noise. We also discuss challenges for using the dual balanced homodyne detection scheme in more complex interferometer topologies, which could lead to improvements in scattered light noise mitigation of gravitational wave detectors.

AG-2024.08-1274

physics.ins-det

Electron Scattering at the Intensity Frontier with SoLID

Zein-Eddine Meziani

The Solenoidal Large Intensity Device (SoLID) is a large acceptance spectrometer capable of operating at the luminosity frontier. It is proposed to fully exploit the scientific potential of the continuous electron beam accelerator facility (CEBAF) 12 GeV energy upgrade at Jefferson Lab. Its conceptual design is mature, having passed multiple reviews and been validated by a successful pre-R\&D phase. The envisioned scientific program consists of three avenues of research, namely the 3D momentum imaging of the structure of the nucleon, the origin of the proton mass through the gluonic gravitational form factors (GFFs), and the search of physics beyond the standard model of particle physics. These avenues are complemented by a growing supplemental list of run group experiments that address a variety of important topics.

AG-2024.08-1343

physics.ins-det

Neuromorphic detection and cooling of microparticles in arrays

Yugang Ren, Benjamin Siegel, Ronghao Yin, Qiongyuan Wu, Jonathan D. Pritchett, Muddassar Rashid, James Millen

Micro-objects levitated in a vacuum are an exciting platform for precision sensing due to their low dissipation motion and the potential for control at the quantum level. Arrays of such sensors would offer increased sensitivity, directionality, and in the quantum regime the potential to exploit correlation and entanglement. We use neuromorphic detection via a single event based camera to record the motion of an array of levitated microspheres. We present a scalable method for arbitrary multiparticle tracking and control by implementing real-time feedback to {simultaneously cool the motion of three uncoupled microscale objects

AG-2024.07-452

physics.ins-det

Optimizing Active Seismic Isolation Systems in Gravitational-Wave Detectors

Terrence Tsang, Fabián Erasmo Peña Arellano, Takafumi Ushiba, Ryutaro Takahashi, Yoichi Aso, Katherine Dooley

Gravitational wave detectors such as KAGRA, a 3-km long underground laser interferometer in Japan, require elaborate passive and active seismic isolation of their mirrors. With the aim of detecting passing gravitational waves that create a relative mirror displacement of less than $10^{-22}\ \mathrm{m}$ at frequencies of tens to hundreds of Hz, all environmental couplings must be stringently suppressed. This paper presents the result of applying the H-infinity optimization method to the active seismic isolation of a gravitational-wave detector for the first time. The so-called \textit{sensor correction} and \textit{sensor fusion} schemes of the seismic attenuation system of KAGRA's signal recycling mirror are used as a test bed. We designed and implemented optimal sensor correction and sensor fusion filters, resulting in a sevenfold attenuation of seismic noise coupling to the signal recycling mirror in the 0.1-0.5 Hz band, with the downstream effect of an 88.2% noise performance improvement in the same frequency band. When combined with other hardware upgrades, the implementation of sensor correction and sensor fusion contributed to an increase in KAGRA's duty cycle from 53% in the O3GK observation run to 80% in O4a, demonstrating the effectiveness of the H-infinity optimization approach.

AG-2024.07-1841

physics.ins-det

Quantum Frequency Mixing using an N-$V$ Diamond Microscope

Samuel J. Karlson, Pauli Kehayias, Jennifer M. Schloss, Andrew C. Maccabe, Adam Libson, David F. Phillips, Guoqing Wang, Paola Cappellaro, Danielle A. Braje

Wide-field magnetic microscopy using nitrogen-vacancy (NV) centers in diamond can yield high-quality magnetic images of DC and AC magnetic fields. The unique combination of micron-scale spatial resolution of scalar or vector fields at room temperature and parallel camera readout make this an appealing technique for applications in biology, geology, condensed-matter physics, and electronics. However, while NV magnetic microscopy has achieved great success in these areas, historically the accessible frequency range has been limited. In this paper, we overcome this limitation by implementing the recently developed technique of quantum frequency mixing. With this approach, we generate wide-field magnetic images of test structures driven by alternating currents up to 70 MHz, well outside the reach of DC and Rabi magnetometry methods. With further improvements, this approach could find utility in hyperspectral imaging for electronics power spectrum analysis, electronics diagnostics and troubleshooting, and quantum computing hardware validation.

AG-2024.05-1558

physics.ins-det

Convolutional L2LFlows: Generating Accurate Showers in Highly Granular Calorimeters Using Convolutional Normalizing Flows

Thorsten Buss, Frank Gaede, Gregor Kasieczka, Claudius Krause, David Shih

In the quest to build generative surrogate models as computationally efficient alternatives to rule-based simulations, the quality of the generated samples remains a crucial frontier. So far, normalizing flows have been among the models with the best fidelity. However, as the latent space in such models is required to have the same dimensionality as the data space, scaling up normalizing flows to high dimensional datasets is not straightforward. The prior L2LFlows approach successfully used a series of separate normalizing flows and sequence of conditioning steps to circumvent this problem. In this work, we extend L2LFlows to simulate showers with a 9-times larger profile in the lateral direction. To achieve this, we introduce convolutional layers and U-Net-type connections, move from masked autoregressive flows to coupling layers, and demonstrate the successful modelling of showers in the ILD Electromagnetic Calorimeter as well as Dataset 3 from the public CaloChallenge dataset.

AG-2024.05-1501

physics.ins-det

Letter of Intent: Towards a Vacuum Birefringence Experiment at the Helmholtz International Beamline for Extreme Fields

N. Ahmadiniaz, C. Bähtz, A. Benediktovitch, C. Bömer, L. Bocklage, T. E. Cowan, J. Edwards, S. Evans, S. Franchino Viñas, H. Gies, S. Göde, J. Görs, J. Grenzer, U. Hernandez Acosta, T. Heinzl, P. Hilz, W. Hippler, L. G. Huang, O. Humphries, F. Karbstein, P. Khademi, B. King, T. Kluge, C. Kohlfürst, D. Krebs, A. Laso-García, R. Lötzsch, A. J. Macleod, B. Marx-Glowna, E. A. Mosman, M. Nakatsutsumi, G. G. Paulus, S. V. Rahul, L. Randolph, R. Röhlsberger, N. Rohringer, A. Sävert, S. Sadashivaiah, R. Sauerbrey, H. -P. Schlenvoigt, S. M. Schmidt, U. Schramm, R. Schützhold, J. -P. Schwinkendorf, D. Seipt, M. Šmíd, T. Stöhlker, T. Toncian, M. Valialshchikov, A. Wipf, U. Zastrau, M. Zepf

Quantum field theory predicts a nonlinear response of the vacuum to strong electromagnetic fields of macroscopic extent. This fundamental tenet has remained experimentally challenging and is yet to be tested in the laboratory. A particularly distinct signature of the resulting optical activity of the quantum vacuum is vacuum birefringence. This offers an excellent opportunity for a precision test of nonlinear quantum electrodynamics in an uncharted parameter regime. Recently, the operation of the high-intensity laser ReLaX provided by the Helmholtz International Beamline for Extreme Fields (HIBEF) has been inaugurated at the High Energy Density (HED) scientific instrument of the European XFEL. We make the case that this worldwide unique combination of an x-ray free-electron laser and an ultra-intense near-infrared laser together with recent advances in high-precision x-ray polarimetry, refinements of prospective discovery scenarios, and progress in their accurate theoretical modelling have set the stage for performing an actual discovery experiment of quantum vacuum nonlinearity.

AG-2024.05-2478

physics.ins-det

Quantum Parity Detectors: a qubit based particle detection scheme with meV thresholds for rare-event searches

Karthik Ramanathan, John E. Parker, Lalit M. Joshi, Andrew D. Beyer, Pierre M. Echternach, Serge Rosenblum, Brandon J. Sandoval, Sunil R. Golwala

The next generation of rare-event searches, such as those aimed at determining the nature of particle dark matter or in measuring fundamental neutrino properties, will benefit from particle detectors with thresholds at the meV scale, 100-1000x lower than currently available. Quantum parity detectors (QPDs) are a novel class of proposed quantum devices that use the tremendous sensitivity of superconducting qubits to quasiparticle tunneling events as their detection concept. As envisioned, phonons generated by particle interactions within a crystalline substrate cause an eventual quasiparticle cascade within a surface patterned superconducting qubit element. This process alters the fundamental charge parity of the device in a binary manner, which can be used to deduce the initial properties of the energy deposition. We lay out the operating mechanism, noise sources, and expected sensitivity of QPDs based on a spectrum of charge-qubit types and readout mechanisms and detail an R&D pathway to demonstrating sensitivity to sub-eV energy deposits.

AG-2024.05-431

physics.ins-det

Sensitivity and control of a 6-axis fused-silica seismometer

Jiri Smetana, Amit Singh Ubhi, Emilia Chick, Leonid Prokhorov, John Bryant, Artemiy Dmitriev, Alex Gill, Lari Koponen, Haixing Miao, Alan V. Cumming, Giles Hammond, Valery Frolov, Richard Mittleman, Peter Fritchel, Denis Martynov

We present a pair of seismometers capable of measurement in all six axes of rigid motion. The vacuum-compatible devices implement compact interferometric displacement sensors to surpass the sensitivity of typical electrical readout schemes. Together with the capability to subtract the sensitivity-limiting coupling of ground tilt into horizontal motion, our seismometers can widen the sensing band towards mHz frequencies. This has notable applications across a range of fields requiring access to low-frequency signals, such as seismology and climate research. We particularly highlight their potential application in gravitational-wave observatories (LIGO) in improving their observation capability of intermediate-mass black holes ($\sim 1000\,M_\odot$). The sensors are based on a near-monolithic fused-silica design consisting of a fused-silica mass and fibre, showing improved stability and robustness to tilt drifts, alignment, and control compared to all-metal or mixed metal-silica designs. We demonstrate tilt sensitivity that surpasses the best commercial alternatives in a significantly reduced footprint compared to our previous iterations of these sensors.

AG-2024.05-2189

physics.ins-det

Combined Classical and Quantum Accelerometers For the Next Generation of Satellite Gravity Missions

Alireza HosseiniArani, Manuel Schilling, Benjamin Tennstedt, Alexey Kupriyanov, Quentin Beaufils, Annike Knabe, Arpetha C. Sreekantaiah, Franck Pereira dos Santos, Steffen Schön, Jürgen Müller

Cold atom interferometry (CAI)-based quantum accelerometers are very promising for future satellite gravity missions thanks to their strength in providing long-term stable and precise measurements of non-gravitational accelerations. However, their limitations due to the low measurement rate and the existence of ambiguities in the raw sensor measurements call for hybridization of the quantum accelerometer (Q-ACC) with a classical one (e.g., electrostatic) with higher bandwidth. While previous hybridization studies have so far considered simple noise models for the Q-ACC and neglected the impact of satellite rotation on the phase shift of the accelerometer, we perform here a more advanced hybridization simulation by implementing a comprehensive noise model for the satellite-based quantum accelerometers and considering the full impact of rotation, gravity gradient, and self-gravity on the instrument. We perform simulation studies for scenarios with different assumptions about quantum and classical sensors and satellite missions. The performance benefits of the hybrid solutions, taking the synergy of both classical and quantum accelerometers into account, will be quantified. We found that implementing a hybrid accelerometer onboard a future gravity mission improves the gravity solution by one to two orders in lower and higher degrees. In particular, the produced global gravity field maps show a drastic reduction in the instrumental contribution to the striping effect after introducing measurements from the hybrid accelerometers.

AG-2024.05-1220

physics.ins-det

Calo-VQ: Vector-Quantized Two-Stage Generative Model in Calorimeter Simulation

Qibin Liu, Chase Shimmin, Xiulong Liu, Eli Shlizerman, Shu Li, Shih-Chieh Hsu

We introduce a novel machine learning method developed for the fast simulation of calorimeter detector response, adapting vector-quantized variational autoencoder (VQ-VAE). Our model adopts a two-stage generation strategy: initially compressing geometry-aware calorimeter data into a discrete latent space, followed by the application of a sequence model to learn and generate the latent tokens. Extensive experimentation on the Calo-challenge dataset underscores the efficiency of our approach, showcasing a remarkable improvement in the generation speed compared with conventional method by a factor of 2000. Remarkably, our model achieves the generation of calorimeter showers within milliseconds. Furthermore, comprehensive quantitative evaluations across various metrics are performed to validate physics performance of generation.

AG-2024.04-1369

physics.ins-det

BUFF: Boosted Decision Tree based Ultra-Fast Flow matching

Cheng Jiang, Sitian Qian, Huilin Qu

Tabular data stands out as one of the most frequently encountered types in high energy physics. Unlike commonly homogeneous data such as pixelated images, simulating high-dimensional tabular data and accurately capturing their correlations are often quite challenging, even with the most advanced architectures. Based on the findings that tree-based models surpass the performance of deep learning models for tasks specific to tabular data, we adopt the very recent generative modeling class named conditional flow matching and employ different techniques to integrate the usage of Gradient Boosted Trees. The performances are evaluated for various tasks on different analysis level with several public datasets. We demonstrate the training and inference time of most high-level simulation tasks can achieve speedup by orders of magnitude. The application can be extended to low-level feature simulation and conditioned generations with competitive performance.

AG-2024.04-1902

physics.ins-det

Advances in Atom Interferometry and their Impacts on the Performance of Quantum Accelerometers On-board Future Satellite Gravity Missions

Alireza HosseiniArania, Manuel Schilling, Quentin Beaufils, Annike Knabe, Benjamin Tennstedt, Alexey Kupriyanov, Steffen Schön, Franck Pereira dos Santos, Jürgen Müller

Recent advances in cold atom interferometry have cleared the path for space applications of quantum inertial sensors, whose level of stability is expected to increase dramatically with the longer interrogation times accessible in space. In this study, a comprehensive in-orbit model is developed for a Mach-Zehnder-type cold-atom accelerometer. Performance tests are realized under different assumptions, and the impact of various sources of errors on instrument stability is evaluated. Current and future advances for space-based atom interferometry are discussed, and their impact on the performance of quantum sensors on-board satellite gravity missions is investigated in three different scenarios: state-of-the-art scenario, near-future (between the next 5 and 10 years) and far-future scenarios (between the next 10 to 20 years). We show that one can achieve a sensitivity level close to 5E-10 with the current state-of-the-art technology. We also estimate that in the near and far-future, atom interferometry in space is expected to achieve sensitivity levels of 1E-11 and 1E-12, respectively. A roadmap for improvements in atom interferometry is provided that would maximize the performance of future CAI accelerometers, considering their technical capabilities. Finally, the possibility and challenges of having ultra-sensitive atom interferometry in space for future space missions are discussed.

AG-2024.04-1584

physics.ins-det

Estimating the Energy Threshold of Phonon-mediated Superconducting Qubit Detectors Operated in an Energy-Relaxation Sensing Scheme

R. Linehan, I. Hernandez, D. J. Temples, S. Q. Dang, D. Baxter, L. Hsu, E. Figueroa-Feliciano, R. Khatiwada, K. Anyang, D. Bowring, G. Bratrud, G. Cancelo, A. Chou, R. Gualtieri, K. Stifter, S. Sussman

In recent years, the lack of a conclusive detection of WIMP dark matter at the 10 GeV/c$^{2}$ mass scale and above has encouraged development of low-threshold detector technology aimed at probing lighter dark matter candidates. Detectors based on Cooper-pair-breaking sensors have emerged as a promising avenue for this detection due to the low (meV-scale) energy required for breaking a Cooper pair in most superconductors. Among them, devices based on superconducting qubits are interesting candidates for sensing due to their observed sensitivity to broken Cooper pairs. We have developed an end-to-end G4CMP-based simulation framework and have used it to evaluate performance metrics of qubit-based devices operating in a gate-based "energy relaxation" readout scheme, akin to those used in recent studies of qubit sensitivity to ionizing radiation. We find that for this readout scheme, the qubit acts as a phonon sensor with an energy threshold ranging down to $\simeq$0.4 eV for near-term performance parameters.

AG-2024.03-1920

physics.ins-det

High-finesse nanofiber Fabry-Pérot resonator in a portable storage container

S. Horikawa, S. Yang, T. Tanaka, T. Aoki, S. Kato

We present characterization and storage methods for a high-finesse nanofiber Fabry-Pérot resonator. Reflection spectroscopy from both ends of the resonator allows for evaluation of the mirror transmittances and optical loss inside the resonator. To maintain the quality of the nanofiber resonator after the fabrication, we have developed a portable storage container. By filling the container with dry, clean nitrogen gas, we can prevent contamination of the nanofiber during storage. This approach allows us to minimize the additional optical loss to less than 0.08% over a week. The portable container facilitates both the fabrication and subsequent experimentation with the resonator in different locations. This flexibility expands the range of applications, including quantum optics, communication, and sensing.

AG-2024.03-1759

physics.ins-det

Fault Localization in a Microfabricated Surface Ion Trap using Diamond Nitrogen-Vacancy Center Magnetometry

Pauli Kehayias, Matthew A. Delaney, Raymond A. Haltli, Susan M. Clark, Melissa C. Revelle, Andrew M. Mounce

As quantum computing hardware becomes more complex with ongoing design innovations and growing capabilities, the quantum computing community needs increasingly powerful techniques for fabrication failure root-cause analysis. This is especially true for trapped-ion quantum computing. As trapped-ion quantum computing aims to scale to thousands of ions, the electrode numbers are growing to several hundred with likely integrated-photonic components also adding to the electrical and fabrication complexity, making faults even harder to locate. In this work, we used a high-resolution quantum magnetic imaging technique, based on nitrogen-vacancy (NV) centers in diamond, to investigate short-circuit faults in an ion trap chip. We imaged currents from these short-circuit faults to ground and compared to intentionally-created faults, finding that the root-cause of the faults was failures in the on-chip trench capacitors. This work, where we exploited the performance advantages of a quantum magnetic sensing technique to troubleshoot a piece of quantum computing hardware, is a unique example of the evolving synergy between emerging quantum technologies to achieve capabilities that were previously inaccessible.

AG-2024.03-1613

physics.ins-det

Miniaturized time-correlated single-photon counting module for time-of-flight non-line-of-sight imaging applications

Jie Wu, Chao Yu, Jian-Wei Zeng, Chen Dai, Feihu Xu, Jun Zhang

Single-photon time-of-flight (TOF) non-line-of-sight (NLOS) imaging enables the high-resolution reconstruction of objects outside the field of view. The compactness of TOF NLOS imaging systems, entailing the miniaturization of key components within such systems is crucial for practical applications. Here, we present a miniaturized four-channel time-correlated single-photon counting module dedicated to TOF NLOS imaging applications. The module achieves excellent performance with a 10 ps bin size and 27.4 ps minimum root-mean-square time resolution. We present the results of TOF NLOS imaging experiment using an InGaAs/InP single-photon detector and the time-correlated single-photon counting module, and show that a 6.3 cm lateral resolution and 2.3 cm depth resolution can be achieved under the conditions of 5 m imaging distance and 1 ms pixel dwell time.

AG-2024.03-165

physics.ins-det

Coherent feedback for quantum expander in gravitational wave observatories

Niels Böttner, Joe Bentley, Roman Schnabel, Mikhail Korobko

The observation of gravitational waves from binary neutron star mergers offers insights into properties of extreme nuclear matter. However, their high-frequency signals in the kHz range are often masked by quantum noise of the laser light used. Here, we propose the "quantum expander with coherent feedback", a new detector design that features an additional optical cavity in the detector output and an internal squeeze operation. This approach allows to boost the sensitivity at high frequencies, at the same time providing a compact and tunable design for signal extraction. It allows to tailor the sensitivity of the detector to the specific signal frequency range. We demonstrate that our design allows to improve the sensitivity of the high-frequency detector concept NEMO (neutron star extreme matter observatory), increasing the detection rates by around 15%. Our approach promises new level of flexibility in designing the detectors aiming at high-frequency signals.

AG-2024.03-993

physics.ins-det

Deep Generative Models for Ultra-High Granularity Particle Physics Detector Simulation: A Voyage From Emulation to Extrapolation

Baran Hashemi

Simulating ultra-high-granularity detector responses in Particle Physics represents a critical yet computationally demanding task. This thesis aims to overcome this challenge for the Pixel Vertex Detector (PXD) at the Belle II experiment, which features over 7.5M pixel channels-the highest spatial resolution detector simulation dataset ever analysed with generative models. This thesis starts off by a comprehensive and taxonomic review on generative models for simulating detector signatures. Then, it presents the Intra-Event Aware Generative Adversarial Network (IEA-GAN), a new geometry-aware generative model that introduces a relational attentive reasoning and Self-Supervised Learning to approximate an "event" in the detector. This study underscores the importance of intra-event correlation for downstream physics analyses. Building upon this, the work drifts towards a more generic approach and presents YonedaVAE, a Category Theory-inspired generative model that tackles the open problem of Out-of-Distribution (OOD) simulation. YonedaVAE introduces a learnable Yoneda embedding to capture the entirety of an event based on its sensor relationships, formulating a Category theoretical language for intra-event relational reasoning. This is complemented by introducing a Self-Supervised learnable prior for VAEs and an Adaptive Top-q sampling mechanism, enabling the model to sample point clouds with variable intra-category cardinality in a zero-shot manner. Variable Intra-event cardinality has not been approached before and is vital for simulating irregular detector geometries. Trained on an early experiment data, YonedaVAE can reach a reasonable OOD simulation precision of a later experiment with almost double luminosity. This study introduces, for the first time, the results of using deep generative models for ultra-high granularity detector simulation in Particle Physics.

AG-2024.02-1607

physics.ins-det

Hardware Trojan Detection Potential and Limits with the Quantum Diamond Microscope

Jacob N. Lenz, Scott K. Perryman, Dmitro J. Martynowych, David A. Hopper, Sean M. Oliver

The Quantum Diamond Microscope (QDM) is an instrument with a demonstrated capability to image electrical current in integrated circuits (ICs), which shows promise for detection of hardware Trojans. The anomalous current activity caused by hardware Trojans manifests through a magnetic field side channel that can be imaged with the QDM, potentially allowing for detection and localization of the effects of tampering. This paper seeks to identify the capabilities of the QDM for hardware Trojan detection through the analysis of previous QDM work as well as QDM physical limits and potential Trojan behaviors. QDM metrics of interest are identified, such as spatial resolution, sensitivity, time-to-result, and field-of-view. Rare event detection on an FPGA is demonstrated with the QDM. The concept of operations is identified for QDM utilization at different steps of IC development, noting necessary considerations and limiting factors for use at different development stages. Finally, the effects of hardware Trojans on IC current activity are estimated and compared to QDM sensitivities to project QDM detection potential for ICs of varying process sizes.

AG-2024.01-462

physics.ins-det

cDVGAN: One Flexible Model for Multi-class Gravitational Wave Signal and Glitch Generation

Tom Dooney, Lyana Curier, Daniel Tan, Melissa Lopez, Chris Van Den Broeck, Stefano Bromuri

Simulating realistic time-domain observations of gravitational waves (GWs) and GW detector glitches can help in advancing GW data analysis. Simulated data can be used in downstream tasks by augmenting datasets for signal searches, balancing data sets for machine learning, and validating detection schemes. In this work, we present Conditional Derivative GAN (cDVGAN), a novel conditional model in the Generative Adversarial Network framework for simulating multiple classes of time-domain observations that represent gravitational waves (GWs) and detector glitches. cDVGAN can also generate generalized hybrid samples that span the variation between classes through interpolation in the conditioned class vector. cDVGAN introduces an additional player into the typical 2-player adversarial game of GANs, where an auxiliary discriminator analyzes the first-order derivative time-series. Our results show that this provides synthetic data that better captures the features of the original data. cDVGAN conditions on three classes, two denoised from LIGO blip and tomte glitch events from its 3rd observing run (O3), and the third representing binary black hole (BBH) mergers. Our proposed cDVGAN outperforms 4 different baseline GAN models in replicating the features of the three classes. Specifically, our experiments show that training convolutional neural networks (CNNs) with our cDVGAN-generated data improves the detection of samples embedded in detector noise beyond the synthetic data from other state-of-the-art GAN models. Our best synthetic dataset yields as much as a 4.2% increase in area-under-the-curve (AUC) performance compared to synthetic datasets from baseline GANs. Moreover, training the CNN with hybrid samples from our cDVGAN outperforms CNNs trained only on the standard classes, when identifying real samples embedded in LIGO detector background (4% AUC improvement for cDVGAN).

AG-2024.01-1136

physics.ins-det

Choose Your Diffusion: Efficient and flexible ways to accelerate the diffusion model in fast high energy physics simulation

Cheng Jiang, Sitian Qian, Huilin Qu

The diffusion model has demonstrated promising results in image generation, recently becoming mainstream and representing a notable advancement for many generative modeling tasks. Prior applications of the diffusion model for both fast event and detector simulation in high energy physics have shown exceptional performance, providing a viable solution to generate sufficient statistics within a constrained computational budget in preparation for the High Luminosity LHC. However, many of these applications suffer from slow generation with large sampling steps and face challenges in finding the optimal balance between sample quality and speed. The study focuses on the latest benchmark developments in efficient ODE/SDE-based samplers, schedulers, and fast convergence training techniques. We test on the public CaloChallenge and JetNet datasets with the designs implemented on the existing architecture, the performance of the generated classes surpass previous models, achieving significant speedup via various evaluation metrics.

AG-2024.01-1823

physics.ins-det

Versatile quadrature antenna for precise control of large electron spin ensembles in diamond

Ruben Pellicer-Guridi, Koen Custers, Joseba Solozabal-Aldalur, Alexey Brodolin, Jason T. Francis, Miguel Varga, Jorge Casanova, Margarethus M. Paulides, Gabriel Molina-Terriza

We present an easily reproducible inexpensive microwave antenna that can generate a strong and homogeneous magnetic field of arbitrary polarization, which enables fast and coherent control of electron spins over a large volume. Unlike preceding works, we present a resonant antenna that maintains its resonant behaviour regardless of the proximity of other experimental hardware components. This robustness is crucial as it enables, amongst others, using microscope objectives with short working distances to perform wide field imaging/sensing with bulk diamonds. The antenna generates a magnetic field strength of 22.3 A/m for 1 W total driving power, which doubles the power efficiency compared with previously reported patch antenna designs. The magnetic field homogeneity in a volume of $0.3 \text{mm}^3$, $0.5 \text{mm}^3$ and $1 \text{mm}^3$ is within 6\%, 8\% and 13\%, respectively. The antenna has a full width at half maximum bandwidth of $\sim$160 MHz and its resonant frequency can be tuned over a 400 MHz range via four capacitors or varactors. The antenna has been tested and found to remain within safe handling temperatures during continuous-wave operation at 8 W. The files required to reproduce this antenna, which can be built on a standard and affordable double sided PCB, are provided open-source. This work facilitates a robust and versatile piece of instrumentation, being particularly appealing for applications such as high sensitivity magnetometry and wide field imaging/sensing with Nitrogen Vacancy centers.

AG-2024.01-1729

physics.ins-det

Mechanical detection of nuclear decays

Jiaxiang Wang, T. W. Penny, Juan Recoaro, Benjamin Siegel, Yu-Han Tseng, David C. Moore

We report the detection of individual nuclear $α$ decays through the mechanical recoil of the entire micron-sized particle in which the decaying nuclei are embedded. Momentum conservation ensures that such measurements are sensitive to any particles emitted in the decay, including neutral particles that may otherwise evade detection with existing techniques. Detection of the minuscule recoil of an object more than $10^{12}$ times more massive than the emitted particles is made possible by recently developed techniques in levitated optomechanics, which enable high-precision optical control and measurement of the mechanical motion of optically trapped particles. Observation of a change in the net charge of the particle coincident with the recoil allows decays to be identified with background levels at the micro-Becquerel level. The techniques developed here may find use in fields ranging from nuclear forensics to dark matter and neutrino physics.

AG-2024.01-1644

physics.ins-det

Microgram $\mathrm{BaCl}_2$ Ablation Targets for Trapped Ion Experiments

Noah Greenberg, Akbar Jahangiri Jozani, Collin J. C. Epstein, Xinghe Tan, Rajibul Islam, Crystal Senko

Trapped ions for quantum information processing has been an area of intense study due to the extraordinarily high fidelity operations that have been reported experimentally. Specifically, barium trapped ions have been shown to have exceptional state-preparation and measurement (SPAM) fidelities. The $^{133}\mathrm{Ba}^+$ ($I = 1/2$) isotope in particular is a promising candidate for large-scale quantum computing experiments. However, a major pitfall with this isotope is that it is radioactive and is thus generally used in microgram quantities to satisfy safety regulations. We describe a new method for creating microgram barium chloride ($\mathrm{BaCl}_2$) ablation targets for use in trapped ion experiments and compare our procedure to previous methods. We outline two recipes for fabrication of ablation targets that increase the production of neutral atoms for isotope-selective loading of barium ions. We show that heat-treatment of the ablation targets greatly increases the consistency at which neutral atoms can be produced and we characterize the uniformity of these targets using trap-independent techniques such as energy dispersive x-ray spectroscopy (EDS) and neutral fluorescence collection. Our comparison between fabrication techniques and demonstration of consistent neutral fluorescence paves a path towards reliable loading of $^{133}\mathrm{Ba}^+$ in surface traps and opens opportunities for scalable quantum computing with this isotope.

AG-2024.01-2192

physics.ins-det

Compensation of front-end and modulation delays in phase and ranging measurements for time-delay interferometry

Philipp Euringer, Niklas Houba, Gerald Hechenblaikner, Oliver Mandel, Francis Soualle, Walter Fichter

In the context of the Laser Interferometer Space Antenna (LISA), the laser subsystems exhibit frequency fluctuations that introduce significant levels of noise into the measurements, surpassing the gravitational wave signal by several orders of magnitude. Mitigation is achieved via time-shifting individual measurements in a data processing step known as time-delay interferometry (TDI). The suppression performance of TDI relies on accurate knowledge and consideration of the delays experienced by the interfering lasers. While considerable efforts have been dedicated to the accurate determination of inter-spacecraft ranging delays, the sources for onboard delays have been either neglected or assumed to be known. Contrary to these assumptions, analog delays of the phasemeter front end and the laser modulator are not only large but also prone to change with temperature and heterodyne frequency. This motivates our proposal for a novel method enabling a calibration of these delays on-ground and in-space, based on minimal functional additions to the receiver architecture. Specifically, we establish a set of calibration measurements and elucidate how these measurements are utilized in data processing, leading to the mitigation of the delays in the TDI Michelson variables. Following a performance analysis of the calibration measurements, proposed calibration scheme is assessed through numerical simulations. We find that in the absence of the calibration scheme, the assumed drifts of the analog delays increase residual laser noise at high frequencies of the LISA measurement band. A single, on-ground calibration of the analog delays leads to an improvement by roughly one order of magnitude, while re-calibration in space may improve performance by yet another order of magnitude. Towards lower frequencies, ranging error is always found to be the limiting factor for which countermeasures are discussed.

AG-2024.01-2250

physics.ins-det

Understanding the Nonlinear Response of SiPMs

Victor Moya, Jaime Rosado

A systematic study of the nonlinear response of Silicon Photomultipliers (SiPMs) has been conducted through Monte Carlo simulations. SiPMs have been proven to show a universal nonlinear response when it is expressed in terms of relative parameters independent of both the gain and the photon detection efficiency (PDE). Nonlinearity has been shown to mainly depend on the balance between the photon rate and the pixel recovery time. However, exponential-like and finite light pulses have been found to lead to different nonlinear behaviors, which also depend on the correlated noise, the overvoltage dependence of the PDE, and the impedance of the readout circuit. Correlated noise has been shown to have a minor impact on nonlinearity, but it can significantly affect the shape of the SiPM output current. Considering these dependencies and previous statistical analysis of the nonlinear response of SiPMs, two simple fitting models have been proposed for exponential-like and finite light pulses, explaining the role of their various terms and parameters. Even though these models have only three fitting parameters, they provide an accurate description of the nonlinear response of SiPMs for a wide range of situations.

AG-2024.01-1378

physics.ins-det

Quantum Noise Limited Phased Arrays for Single-Electron Cyclotron Radiation Emission Spectroscopy

Stafford Withington, Christopher Thomas, Songyuan Zhao

Neutrino oscillation experiments show that neutrinos have mass; however, the absolute mass scale is exceedingly difficult to measure and is currently unknown. A promising approach is to measure the energies of the electrons released during the radioactive decay of tritium. The energies of interest are within a few eV of the 18.6 keV end point, and so are mildly relativistic. By capturing the electrons in a static magnetic field and measuring the frequency of the cyclotron radiation emitted the initial energy can be determined, but end-point events are infrequent, the observing times short, and the signal to noise ratios low. To achieve a resolution of $<$ 10 meV, single-electron emission spectra need to be recorded over large fields of view with highly sensitive receivers. The principles of Cylotron Radiation Emission Spectroscopy (CRES) have already been demonstrated by Project 8, and now there is considerable interest in increasing the FoV to $>$ 0.1 m$^3$. We consider a range of issues relating to the design and optimisation of inward-looking quantum-noise-limited microwave receivers for single-electron CRES, and present a single framework for understanding signal, noise and system-level behaviour. Whilst there is a great deal of literature relating to the design of outward-looking phased arrays for applications such as radar and telecommunications, there is very little coverage of the new issues that come into play when designing ultra-sensitive inward-looking phased arrays for volumetric spectroscopy and imaging.

AG-2024.01-1359

physics.ins-det

The control system of the AEgIS experiment at CERN

Georgy Kornakov, Jakub Zieliński, Grzegorz Kasprowicz

The AEgIS experiment at CERN recently decided to adopt a control system solution based on the Sinara/ARTIQ open hardware and software infrastructure. This decision meant to depart from the previously used paradigm of custom-made electronics and software to control the experiment's equipment. Instead, adopting a solution with long-term support and used in many quantum physics experiments guarantees a vivid community using similar infrastructures. This transition reduces the risks and development timeline for integrating new equipment seamlessly within the setup. This work reviews the motivation, the setup, and the chosen hardware and presents several planned further steps in developing the control system.

AG-2024.01-1354

physics.ins-det

Compact InGaAs/InP single-photon detector module with ultra-narrowband interference circuits

Yan Zhengyu, Shi Tingting, Fan Yuanbin, Zhou Lai, Yuan Zhiliang

Gated InGaAs/InP avalanche photodiodes are the most practical device for detection of telecom single photons arriving at regular intervals.Here, we report the development of a compact single-photon detector (SPD) module measured just 8.8cm * 6cm * 2cm in size and fully integrated with driving signal generation, faint avalanche readout, and discrimination circuits as well as temperature regulation and compensation. The readout circuit employs our previously reported ultra-narrowband interference circuits (UNICs) to eliminate the capacitive response to the gating signal. We characterize a UNIC-SPD module with a 1.25-GHz clock input and find its performance comparable to its counterpart built upon discrete functional blocks. Setting its detection efficiency to 30% for 1,550-nm photons, we obtain an afterpulsing probability of 2.4% and a dark count probability of 8E-7 per gate under 3-ns hold-off time. We believe that UNIC-SPDs will be useful in important applications such as quantum key distribution.

AG-2024.01-1286

physics.ins-det

Silicon Photomultipliers for Detection of Photon Bunching Signatures

Lucas Finazzi, Federico Izraelevitch, Alexis Luszczak, Thomas Huber, Andreas Haungs, Federico Golmar

In this work, photon bunching from LED light was observed for the first time using SiPMs. The bunching signature was observed with a significance of $7.3~σ$ using 97~hs of data. The light was spectrally filtered using a 1~nm bandpass filter and an Etalon filter to ensure temporal coherence of the field and its coherence time was measured to be $τ_C = (19 \pm 2)$~ps. The impact of SiPM non-idealities in these kinds of measurements is explored, and we describe the methodology to process SiPM analog waveforms and the event selection used to mitigate these non-idealities.

AG-2023.11-006

physics.ins-det

LUCE: A milli-Kelvin calorimeter experiment to study the electron capture of 176Lu

Shihong Fu, Giovanni Benato, Carlo Bucci, Paolo Gorla, Pedro V. Guillaumon, Jiang Li, Serge Nagorny, Francesco Nozzoli, Lorenzo Pagnanini, Andrei Puiu, Matthew Stukel

The LUCE (LUtetium sCintillation Experiment) project will search for the 176Lu electron capture based on a milli-Kelvin calorimetric approach. This decay is of special interest in the field of nuclear structure, with implications for the s-process and for a better comprehension of the nuclear matrix elements of neutrinoless double beta decay (0ν\b{eta}\b{eta}) and two-neutrino double beta decay (2ν\b{eta}\b{eta}). Possible impacts also include the development of a new class of coherent elastic neutrino-nucleus scattering (CEνNS) and spin-dependent (independent) dark matter detectors. We report on the current status and design of a novel detector cryogenic-module for the measurement of the electron capture and detail a future measurement plan.

AG-2015.06-1540

physics.ins-det

Resonance frequency shift of strongly heated micro-cantilevers

Felipe Aguilar Sandoval, Mickael Geitner, Éric Bertin, Ludovic Bellon

In optical detection setups to measure the deflection of micro-cantilevers, part of the sensing light is absorbed, heating the mechanical probe. We present experimental evidences of a frequency shift of the resonant modes of a cantilever when the light power of the optical measurement set-up is increased. This frequency shift is a signature of the temperature rise, and presents a dependence on the mode number. An analytical model is derived to take into account the temperature profile along the cantilever, it shows that the frequency shifts are given by an average of the profile weighted by the local curvature for each resonant mode. We apply this framework to measurements in vacuum and demonstrate that huge temperatures can be reached with moderate light intensities: a thousand {\textdegree}C with little more than 10 mW. We finally present some insight into the physical phenomena when the cantilever is in air instead of vacuum.

AG-2015.06-1584

physics.ins-det

Thermal Maps of Gases in Heterogeneous Reactions

Nanette N. Jarenwattananon, Stefan Gloeggler, Trenton Otto, Arek Melkonian, William Morris, Scott R. Burt, Omar M. Yaghi, Louis-S. Bouchard

Over 85% of all chemical industry products are made using catalysts, with the overwhelming majority of these employing heterogeneous catalysts functioning at the gas-solid interface. Consequently, optimizing catalytic reactor design attracts much effort. Such optimization relies on heat transfer and fluid dynamics modeling coupled to surface reaction kinetics. The complexity of these systems demands many approximations, which can only be tested with experimental observations of quantities such as temperature, pressure, concentrations, flow rates, etc. One essential measurement is a map of the spatial variation in temperature throughout the catalyst bed. We present here the first non-invasive maps of gas temperatures in catalyst-filled reactors, including high spatial resolution maps in microreactors enabled by parahydrogen. The thermal maps reveal energy flux patterns whose length scale correlates with the catalyst packing. By exploiting the motional averaging under a weak applied magnetic-field gradient, the nuclear magnetic resonance (NMR) linewidths are inversely proportional to temperature. Measurements during the hydrogenation of propylene in reactors packed with metal nanoparticles and metal-organic framework catalysts yield temperature coefficients of ~0.1 Hz/K, and temperature error <4%. Temperature sensitivity increases with gradient strength, enabling tuning of precision.

AG-2015.06-1173

physics.ins-det

The Omega Counter, a Frequency Counter Based on the Linear Regression

E. Rubiola, M. Lenczner, P. -Y. Bourgeois, F. Vernotte

This article introduces the Ω counter, a frequency counter -- or a frequency-to-digital converter, in a different jargon -- based on the Linear Regression (LR) algorithm on time stamps. We discuss the noise of the electronics. We derive the statistical properties of the Ω counter on rigorous mathematical basis, including the weighted measure and the frequency response. We describe an implementation based on a SoC, under test in our laboratory, and we compare the Ω counter to the traditional Π and Λ counters. The LR exhibits optimum rejection of white phase noise, superior to that of the Π and Λ counters. White noise is the major practical problem of wideband digital electronics, both in the instrument internal circuits and in the fast processes which we may want to measure. The Ω counter finds a natural application in the measurement of the Parabolic Variance, described in the companion article arXiv:1506.00687 [physics.data-an].

AG-2015.06-1216

physics.ins-det

Development of a Compton imager based on bars of scintillator

A. M. L. MacLeod, P. J. Boyle, D. S. Hanna, P. R. B. Saull, L. E. Sinclair, H. C. J. Seywerd

We have developed a compact Compton gamma-ray imager with a large field of view and a low channel-count that is capable of quickly localizing gamma-ray sources in the few hundred keV - several MeV range. The two detector planes (scatter and absorber) employ bars of NaI(Tl) read out by photomultiplier tubes (PMTs) located at each end. The long-range imaging performance has been tested from 392 keV to 1274 keV. An angular resolution measure of 2.72 +/- 0.06 degrees and an efficiency of (1.79 +/- 0.04) x 10^(-3) at 662 keV is obtained. A Cs-137 (662 keV) source equivalent to a 10 mCi source 40 m away can be located in 60 seconds with an uncertainty of about a degree. No significant degradation in imaging performance is observed for source angles up to 40 degrees off axis.

AG-2015.06-779

physics.ins-det

A Novel Self-supporting GEM-based Amplification Structure for a Time Projection Chamber at the ILC

Ties Behnke, Ralf Diener, Christoph Rosemann, Lea Steder

Modern time projection chambers are increasingly based on micro pattern gas detector readout systems. In this paper a self-supporting method used to mount Gas Electron Multiplier foils is presented. It is based on light weight ceramic grids, and promises to cover large readout areas with minimum dead zones and material, while ensuring a flat and mechanically stable mounting. The structure has been tested in a Time Projection Chamber prototype, using cosmic muon tracks. The impact of the mounting structure on the charge measurement, the track reconstruction and the single point resolution is quantified.

AG-2015.06-798

physics.ins-det

LArGe - Active background suppression using argon scintillation for the GERDA $0νββ$-experiment

M. Agostini, M. Barnabé-Heider, D. Budjáš, C. Cattadori, A. Gangapshev, K. Gusev, M. Heisel, M. Junker, A. Klimenko, A. Lubashevskiy, K. Pelczar, S. Schönert, A. Smolnikov, G. Zuzel

LArGe is a GERDA low-background test facility to study novel background suppression methods in a low-background environment, for future application in the GERDA experiment. Similar to GERDA, LArGe operates bare germanium detectors submersed into liquid argon (1 m$^3$, 1.4 tons), which in addition is instrumented with photomultipliers to detect argon scintillation light. The scintillation signals are used in anti-coincidence with the germanium detectors to effectively suppress background events that deposit energy in the liquid argon. The background suppression efficiency was studied in combination with a pulse shape discrimination (PSD) technique using a BEGe detector for various sources, which represent characteristic backgrounds to GERDA. Suppression factors of a few times $10^3$ have been achieved. First background data of LArGe with a coaxial HPGe detector (without PSD) yield a background index of (0.12$-$4.6)$\cdot 10^{-2}$ cts/(keV$\cdot$kg$\cdot$y) (90% C.L.), which is at the level of GERDA Phase I. Furthermore, for the first time we monitor the natural $^{42}$Ar abundance (parallel to GERDA), and have indication for the $2νββ$-decay in natural germanium. These results show the effectivity of an active liquid argon veto in an ultra-low background environment. As a consequence, the implementation of a liquid argon veto in GERDA Phase II is pursued.

AG-2015.06-749

physics.ins-det

Digital-photonic synthesis of ultra-low noise tunable signals from RF to 100 GHz

T. M. Fortier, A. Rolland, F. Quinlan, F. N. Baynes, A. J. Metcalf, A. Hati, A. Ludlow, N. Hinkley, M. Shimizu, T. Ishibashi, J. C. Campbell, S. A. Diddams

The demand for higher data rates and better synchronization in communication and navigation systems necessitates the development of new wideband and tunable sources with noise performance exceeding that provided by traditional oscillators and synthesizers. Precision synthesis is paramount for providing frequency references and timing in a broad range of applications including next-generation telecommunications, high precision measurement, and radar and sensing. Here we describe a digital-photonic synthesizer (DPS) based on optical frequency division that enables the generation of widely tunable signals from near DC to 100 GHz with a fractional frequency instability of 1 part in 10^15. The spectral purity of the DPS derived signals represents an improvement in close-to-carrier noise performance over the current state-of-the-art of nearly 7 orders of magnitude in the W-band (100 GHz), and up to 5 orders of magnitude in the X-band (10 GHz).

AG-2015.06-764

physics.ins-det

Long Time Stability of the Energy Scale Calibration of a Quantum 2000

Uwe Scheithauer

According to the international standard ISO 15472 the energy scale of an XPS instrument, type Physical Electronics Quantum 2000, was calibrated. It is shown, how the procedures of the ISO 15472 were adapted to the hardware and software design of the Quantum 2000. The long time stability of the energy scale calibration of the XPS instrument was investigated. The instrumented was operated with a satisfying energy scale calibration over a period of 8 years. All the time energy differences between certain peaks could be measured with the chosen precision of the energy scale calibration.

AG-2015.06-642

physics.ins-det

The CUORE and CUORE-0 Experiments at Gran Sasso

A. Giachero, D. R. Artusa, F. T. Avignone, O. Azzolini, M. Balata, T. I. Banks, G. Bari, J. Beeman, F. Bellini, A. Bersani, M. Biassoni, C. Brofferio, C. Bucci, X. Z. Cai, A. Camacho, A. Caminata, L. Canonica, X. G. Cao, S. Capelli, L. Cappelli, L. Carbone, L. Cardani, N. Casali, L. Cassina, D. Chiesa, N. Chott, M. Clemenza, S. Copello, C. Cosmelli, O. Cremonesi, R. J. Creswick, J. S. Cushman, I. Dafinei, A. Dally, V. Datskov, S. Dell&#39;Oro, M. M. Deninno, S. Di Domizio, M. L. di Vacri, A. Drobizhev, L. Ejzak, D. Q. Fang, H. A. Farach, M. Faverzani, G. Fernandes, E. Ferri, F. Ferroni, E. Fiorini, M. A. Franceschi, S. J. Freedman, B. K. Fujikawa, L. Gironi, A. Giuliani, P. Gorla, C. Gotti, T. D. Gutierrez, E. E. Haller, K. Han, K. M. Heeger, R. Hennings-Yeomans, K. P. Hickerson, H. Z. Huang, R. Kadel, K. Kazkaz, G. Keppel, Yu. G. Kolomensky, Y. L. Li, C. Ligi, K. E. Lim, X. Liu, Y. G. Ma, C. Maiano, M. Maino, M. Martinez, R. H. Maruyama, Y. Mei, N. Moggi, S. Morganti, T. Napolitano, M. Nastasi, S. Nisi, C. Nones, E. B. Norman, A. Nucciotti, T. O&#39;Donnell, F. Orio, D. Orlandi, J. L. Ouellet, C. E. Pagliarone, M. Pallavicini, L. Pattavina, M. Pavan, M. Pedretti, G. Pessina, V. Pettinacci, G. Piperno, C. Pira, S. Pirro, S. Pozzi, E. Previtali, V. Rampazzo, C. Rosenfeld, C. Rusconi, E. Sala, S. Sangiorgio, N. D. Scielzo, M. Sisti, A. R. Smith, L. Taffarello, M. Tenconi, F. Terranova, W. D. Tian, C. Tomei, S. Trentalange, G. Ventura, M. Vignati, B. S. Wang, H. W. Wang, L. Wielgus, J. Wilson, L. A. Winslow, T. Wise, A. Woodcraft, L. Zanotti, C. Zarra, G. Q. Zhang, B. X. Zhu, S. Zucchelli

The Cryogenic Underground Observatory for Rare Events (CUORE) is an experiment to search for neutrinoless double beta decay ($0νββ$) in $^{130}$Te and other rare processes. CUORE is a cryogenic detector composed of 988 TeO$_2$ bolometers for a total mass of about 741 kg. The detector is being constructed at the Laboratori Nazionali del Gran Sasso, Italy, where it will start taking data in 2015. If the target background of 0.01 counts/(keV$\cdot$kg$\cdot$y) will be reached, in five years of data taking CUORE will have an half life sensitivity around $1\times 10^{26}$ y at 90\% C.L. As a first step towards CUORE a smaller experiment CUORE-0, constructed to test and demonstrate the performances expected for CUORE, has been assembled and is running. The detector is a single tower of 52 CUORE-like bolometers that started taking data in spring 2013. The status and perspectives of CUORE will be discussed, and the first CUORE-0 data will be presented.

AG-2015.06-1446

physics.ins-det

Fabrication of silica aerogel with $n$ = 1.08 for $e^+/μ^+$ separation in a threshold Cherenkov counter of the J-PARC TREK/E36 experiment

Makoto Tabata, Akihisa Toyoda, Hideyuki Kawai, Youichi Igarashi, Jun Imazato, Suguru Shimizu, Hirohito Yamazaki

This study presents the development of hydrophobic silica aerogel for use as a radiator in threshold-type Cherenkov counters. These counters are to be used for separating positrons and positive muons produced by kaon decay in the J-PARC TREK/E36 experiment. We chose to employ aerogel with a refractive index of 1.08 to identify charged particles with momenta of approximately 240 MeV/$c$, and the radiator block shape was designed with a trapezoidal cross-section to fit the barrel region surrounding the kaon stopping target in the center of the TREK/E36 detector system. Including spares, we obtained 30 crack-free aerogel blocks segmented into two layers, each layer having a thickness of 2 cm and a length of 18 cm, to fill 12 counter modules. Optical measurements showed that the produced aerogel tiles had the required refractive indices and transparency.

AG-2015.06-558

physics.ins-det

New Detection System for Heavy Element Research

Y. S. Tsyganov, A. N. Polyakov, A. A. Voinov, M. V. Shumeyko

New detection system design for heavy element research with 48Ca projectile has been reported. This system is based on application of 32 position sensitive strip PIPS detector and low pressure pentane filled TOF detector application in 48Ca induced nuclear reactions. To suppress beam associated background products new version of real time method of active correlations has been applied. Examples of applications in 249Bk+48Ca and 243Am+48Ca reactions are presented. The system development to operate together with the digital ORNL detection system to provide a quick search for recoil to alpha correlation chains has been discussed too.