Optics

AG-2026.04-2086

physics.optics

Bound states of solitons in fiber lasers

Yudong Cui, Tianchang Lu, Yusheng Zhang, Dong Mao, Boris A. Malomed

This article presents a systematic review of theoretical and experimental findings for bound states of two and several dissipative solitons in fiber lasers. The theoretical basis underlying the formation and stabilization of soliton molecules in the fibers, which is provided by the complex Ginzburg-Landau equations and bound states of such equations, is presented in necessary detail, which is followed by a detailed presentation of experimental findings, including very recent ones. In particular, included are the results for the multi-soliton bound states in the fibers, as well as for the bound states in the temporal and frequency domains, single-component (scalar) and two-component (vector), two- and multi-soliton modes, as well as for bound states of spatiotemporal dissipative solitons in the lasers based on multimode fibers.

AG-2026.04-2087

physics.optics

Analysis of Electromagnetic Scattering from Semiconductor Nanostructures by Solving Coupled Volume Integral and Two-fluid Hydrodynamic Equations

Doolos Aibek Uulu, Meruyert Khamitova, Rui Chen, Liang Chen, Ping Li, Hakan Bagci

Semiconductor-based plasmonic nanostructures support localized surface plasmon modes in the infrared region. Unlike metallic nanostructures, they support both free electrons and holes, requiring a two-fluid hydrodynamic Drude equation (HDE) to accurately capture spatial dispersion effects and low-frequency acoustic plasmon modes that cannot be described by single-fluid models. In this work, a volume integral equation (VIE)-based solver is proposed for the analysis of electromagnetic scattering from semiconductor nanostructures. The proposed approach couples the VIE, formulated in terms of the electric flux density and the free-electron and hole polarization currents, with the two-fluid HDE. The coupled system is discretized using a tetrahedral mesh and solved efficiently using a two-level iterative solver. In contrast to finite-element-based methods, the proposed VIE-based approach does not require domain-wide meshing and inherently satisfies the radiation condition, thereby eliminating artificial absorbing boundaries. Numerical results for InSb-type semiconductor nanostructures demonstrate the accuracy and efficiency of the proposed VIE-based solver and its ability to capture unique optical phenomena, such as acoustic plasmon resonances and the blueshift of localized surface plasmon resonances, that cannot be described by the single-fluid HDE or classical Drude-based models.

AG-2026.04-2088

physics.optics

Many-mode grating couplers by avoiding undesired couplings

Nazar Pyvovar, Hao Li, Zhaowei Dai, Owen D. Miller

To couple many independent modes from free space to on chip, the key challenge is not enhancing the many necessary coupling rates (scattering-matrix elements) between targeted mode pairs. Instead, the key is to avoid additional cross-couplings to undesired modes, due to the presence of multiple simultaneously satisfied phase-matching conditions. With this principle, we identify scaling laws for the maximum number of high-efficiency multi-mode couplings that may be achievable for a given refractive index and design region, which are strongly supported by extensive numerical inverse-design experiments in 2D (one-dimensional coupler patterns, scattering in 2D). For such couplers, typical mode counts of 5--10 appear achievable. Three-dimensional couplers (patterned across two dimensions) can be markedly better, with tens of Fourier components in a single-layer device offering the possibility of high-efficiency coupling of hundreds to thousands of modes in relatively compact form factors. Numerical simulations of such a device, without any parameter optimization, predict efficiencies on the order of 5\% for 100 modes -- a collective order-of-magnitude improvement over previous designs.

AG-2026.04-2089

physics.optics

Multimode grating couplers via foundry-compliant inverse design

Hao Li, Nazar Pyvovar, Zhaowei Dai, Owen D. Miller

We apply a systematic inverse design approach to discover foundry-compliant, multilayer grating couplers that can efficiently couple a number of independent waves from free space to on-chip propagating modes. For visible- and near-infrared couplers, we find that minimum feature sizes are by far the most important constraint to tailor the design algorithms around. If, additionally, one forces the optimization to be robust to over- and under-etch errors, the resulting designs exhibit stable optimal efficiencies in the presence of other imperfections (critical dimension variations, overlay mismatch, and sidewall angle variation). The foundry-compliant designs exhibit moderate efficiency penalties as feature sizes increase, but no change to simple underlying scaling laws with respect to requisite numbers of layers and layer thicknesses. These results establish a practical, generalizable framework for high-efficiency multimode coupling within the constraints of modern semiconductor foundries.

AG-2026.04-2091

physics.optics

Comparison of two laser wavelengths for LIBS bioimaging of plants grown in lunar regolith

T. Vozár, L. Čechová, J. Buday, M. Füleky, K. Molnárová, L. Lenža, J. Mužík, Y. Koshiba, M. Smrž, P. Pořízka, J. Kaiser

The colonisation of extraterrestrial planets requires sustainable food production independent of Earth-based supplies. Due to the high costs and complicated logistics of food transport, in-situ cultivation will be essential. Growing plants directly in regolith offers a practical approach to achieve sustainable long-term human habitation beyond Earth. In this study, Laser-Induced Breakdown Spectroscopy (LIBS) technique was employed for bioimaging of broccoli (Brassica oleracea) and salad (Lactuca sativa) plants grown in Lunar regolith simulant and control substrate. For this purpose, the potential of the 2090 nm laser wavelength for bioimaging of plant tissue was studied compared to the conventional 1064 nm. The signal-to-noise ratio (SNR), total emissivity ($ε_{\mathrm{tot}}$), and Mg II / Mg I intensity ratio (ionisation degree) were all higher when using the 2090 nm laser wavelength compared to 1064 nm. These findings indicate that the 2090 nm laser produces a hotter and more efficiently ionised plasma, supporting its feasibility for bioimaging of plant tissues. Additionally, bioimaging with both laser wavelengths confirmed higher uptake of key plant nutrients such as magnesium (Mg) and calcium (Ca) from Lunar regolith simulant. These results support the potential of LIBS as a diagnostic tool for plant growth monitoring in extraterrestrial environments.

AG-2026.04-2092

physics.optics

Low-cost passive single-shot ultrafast imaging at 685 Gfps

Dilem Eşlik, Bahadır Utku Kesgin, Uğur Teğin

Capturing ultrafast transient phenomena conventionally requires streak cameras or computational imaging based on compressed sensing, which lead to complex and costly systems. In this Letter, we demonstrate, to the best of our knowledge, the first fully passive single-shot ultrafast imaging architecture assembled entirely from off-the-shelf, low-cost components. A commercial microlens array combined with a stack of standard microscope cover glasses maps temporal information into multiple spatial channels, and a consumer-grade CMOS image sensor records all delayed replicas within a single camera exposure. The proposed system has a total hardware cost below US\$500 and captures the evolution of a picosecond laser pulse with a temporal sampling interval of 1.46~ps, an effective frame rate of 685~Gfps, and a sequence depth of ten frames. The temporal fidelity of the system is verified by recovering the expected Gaussian pulse profile, and the spatial resolution is characterized through a point-source measurement with a point spread function of 1.86 and 1.62 pixels full width at half maximum along the horizontal and vertical directions, respectively. The proposed architecture presents an alternative approach to single-shot ultrafast imaging with a simple, low-cost, computation-free, and fully passive design.

AG-2026.04-2093

physics.optics

Second harmonic generation and third harmonic generation in topological insulator-based van der Waals metamaterials

Alessandra Di Gaspare, Sara Ghayeb, Craig Knox, Edmund H. Linfield, Joshua Freeman, Miriam S. Vitiello

High-order harmonic generation (HHG) in solids - the frequency up-conversion of an optical signal - is governed by symmetries. At terahertz (THz) frequencies, HHG is a key technology to access high frequency spectral windows that are usually difficult to cover using conventional solid state laser technologies. This effect has been recently exploited in graphene where HHG has been demonstrated, albeit only at odd multiples of the driving frequency owing to its inherent centro-symmetry. In topological insulators (TIs), the combination of spin-orbit interaction and time-reversal symmetry create an insulating bulk state with an inverted band order, inseparably connected with conducting surface states. TIs have been predicted to support unconventional high harmonic generation from the bulk and topological surface, which are usually difficult to be distinguished. However, no experimental results have been provided, so far. Here, we exploit the strong optical field amplification provided by an array of single or double split ring resonators, with embedded Bi2Se3 or (InxBi(1-x))2Se3/ Bi2Se3 van der Waals heterostructures, to achieve up-conversion in the 6.4 (even) - 9.7 (odd) THz frequency range. This results from bulk centro-symmetry (odd states) and symmetry breaking in the topological surface states (odd and even).

AG-2026.04-2094

physics.optics

YOSO: single-frame Gerchberg-Saxton phase retrieval with AI-based data augmentation for in-line holography

Julianna Winnik, Adam Walocha, Wojciech Ogonowski, Wiktor Forjasz, Piotr Arcab, Mikołaj Rogalski, Aleksandra Rutkowska, Marzena Stefaniuk, José Ángel Picazo-Bueno, Vicente Micó, Maciej Trusiak, Maria Cywińska

We present YOSO (You Only Shot Once), a single-frame phase retrieval framework for digital in-line holographic microscopy (DIHM) in which supervised deep learning is used to numerically generate an additional hologram corresponding to different defocus distance, creating a so-called multi-height dataset, which is then conventionally processed with a well-established Gerchberg-Saxton (GS) algorithm. YOSO is trained on computer-generated data derived from natural images, enabling strong generalization. The selected multi-scale ResNet architecture enables rapid training in under two hours on a mid-range workstation, which is done only once, enabling efficient inference thereafter. We further show that YOSO network can process inputs of varying spatial dimensions, allowing training on small inputs and direct inference on full-sized holograms while bypassing patch-and-stitch procedure. A further advantage of YOSO is its physics-consistent hologram padding, which replaces conventional zero or edge-value padding with a physically grounded approach compatible with the GS framework. The YOSO framework is tested on various systems (lens-based and lensless DIHM) and diverse samples: a resolution test target, adherent and suspended biological cells, and a mouse brain slice. The results show that YOSO is compatible with 3D objects and correctly recovers defocused object wave features, enabling holographic postprocessing such as numerical refocusing. The results of this work are available publicly as software for end-to-end implementation.

AG-2026.04-2095

physics.optics

Leveraging natural fluctuations for matrix-based aberration correction in photoacoustic imaging

Yevgeny Slobodkin, Ori Katz

Photoacoustic imaging is the leading technique for deep tissue optical imaging, allowing single-shot imaging at depths. However, its resolution may be limited by acoustic aberrations, caused by natural unknown heterogeneities in the tissue speed of sound. In recent years, reflection-matrix based scattering-compensation techniques have been successfully employed in ultrasound, optics, and seismology, to computationally correct such distortions. However, they have not been adapted to photoacoustic imaging since they rely on multiple acquisitions under different controlled excitations, such as input plane-wave illuminations, which do not result in signal changes in photoacoustics. Here, we introduce a framework that enables the direct application of the state-of-the-art reflection-matrix based aberration correction techniques to photoacoustic imaging of dynamic targets. Specifically, we show that a covariance matrix analysis of a conventional set of photoacoustic frames of dynamic targets, such as flowing red blood cells in blood vessels, yields a virtual reflection-matrix that is mathematically analogous to a pulse-echo reflection-matrix, and lends itself to direct processing by conventional reflection-matrix based scattering-compensation algorithms. We validate and demonstrate the approach for photoacoustic aberration correction of vessel-mimicking targets containing flowing absorbers in both simulations and experiments.

AG-2026.04-2096

physics.optics

Multi-wavelength polarisation imaging with inverse designed metasurfaces

Sarah E. Dean, Neuton Li, Josephine Munro, Benjamin Laudert, Thomas Siefke, Quyet Ngo, Robert Sharp, Dragomir N. Neshev, Falk Eilenberger, Andrey A. Sukhorukov

Multispectral polarisation imaging has a broad range of applications, from biological cell imaging to agricultural remote surveying. For such applications, especially involving lightweight unmanned aerial vehicles like drones, it is necessary to have compact, single-shot, efficient optical systems. We present a metasurface design that diffractively separates a scene into spectral and polarimetric measurements with a single optical component, operating for 532 nm and 700 nm in a single-shot imaging system. The polarisation imaging performance of the design is shown to be robust to both spectral and angular bandwidths, and multispectral polarimetry is demonstrated experimentally.

AG-2026.04-2097

physics.optics

Field-driven helicity in solid-state high-harmonic generation

Carlos Batista, Jean Paul Menotti, Dasol Kim, Bikash Kumar Das, Wenlong Gao, Alexis Chacón, Camilo Granados

The polarization state of light plays a central role in strong-field light--matter interactions and is widely used to probe electronic structure in solids via high-order harmonic generation (HHG). In particular, helicity-resolved HHG has been interpreted as a fingerprint of crystal symmetry and topology. Here, we demonstrate deterministic and continuous control of harmonic helicity in solids using polarization-crafted beams, formed by two orthogonally polarized pulses with a controlled time delay. By tuning this delay, the polarization state of individual harmonics can be driven from linear to circular, independent of the material under investigation. We show that this behavior is robust across systems with distinct symmetry and topology, and originates from the sub-cycle modulation of the light--matter interaction mediated by the dipole coupling. Furthermore, the orthogonal configuration allows to break the dynamical symmetry of the light-matter interaction which is manifested in the generation of otherwise forbidden harmonics under standard selection rules.. These results establish harmonic helicity as a field-controlled observable rather than a direct material fingerprint.

AG-2026.04-1942

physics.optics

OAM-mode sorting with a wavefront twister

Suman Karan, Swati Chaudhary, Harshwardhan Wanare, Anand Kumar Jha

We propose an OAM sorter based on a novel optical element that we refer to as a wavefront twister. It is a generalization of the conventional wavefront rotators such as the Dove prism. However, unlike a Dove prism, which simply rotates a wavefront, the rotation generated by a wavefront twister varies linearly with radial position, resulting in the twisting of the wavefront. We demonstrate that the wavefront twister, followed by a lens, maps each OAM mode to an annulus of distinct radius at the back focal plane of the lens with negligible inter-modal overlap and preserves the circular symmetry. Thus, the proposed wavefront twister offers a scalable scheme for high-dimensional OAM mode sorting, with important consequences for the practical realization of OAM-based applications.

AG-2026.04-2098

physics.optics

Universal Nano-Bead Emitter Inks for Programmable Nanometric Fluorescent Architectures

Ilya Olevsko, Maria Shehadeh, Dmytro Ohorodniichuk, Leonid Weisman, Rotem Golan, Martin Oheim, Gerardo Byk, Adi Salomon

Fabricating brightly fluorescent layers with nanometric thickness and digitally controlled lateral structuration remains a challenge for next-generation photonic devices, optical calibration standards, and biocompatible interfaces. Here, we introduce Nano-Bead Emitters (NBEs), hydrogel nanoparticles covalently functionalized with fluorophores, as a universal, water-processable ink platform for fabricating programmable nanometric fluorescent architectures. By immobilizing fluorophores within a charged nanohydrogel scaffold, the platform entirely decouples film morphology from dye solubility. This molecule-independent strategy enables spectrally distinct, inherently water-insoluble dyes to be processed using a single, standardized aqueous ink formulation. Combined with laser-induced forward transfer (LIFT) printing, this additive approach yields highly uniform fluorescent layers (~7 nm thickness, sub-nanometric roughness). This structural invariance produces complex multicolor patterns sharing identical thickness and surface morphology across all spectral channels, a critical requirement for quantitative optical calibration. Furthermore, LIFT printing provides programmable, layer-by-layer control over fluorescence intensity via successive deposition cycles, yielding precisely tunable brightness without aggregation-caused quenching. This maskless technique enables rapid, high-fidelity printing of both monochromatic and multicolor patterns over macroscopic areas with absolute spatial resolution. Finally, these universally compatible NBE inks stably deposit onto diverse substrates (glass, polymers, semiconductors, metasurfaces), effectively bridging scalable manufacturing with high-performance integrated photonic systems.

AG-2026.04-2099

physics.optics

A Magnetically Switchable Bifocal Metasurface

Alberto Santonocito, Barbara Patrizi, Alessio Gabbani, Francesco Pineider, Guido Toci

Tunable flat optics are essential for advancing compact photonic devices. Here we show a numerical study of a reflective magneto-optical metasurface with a dynamically tunable focal length. The structure comprises bismuth iron garnet nanodisks in a Gires-Tournois resonator configuration. The magneto-optical properties of the garnet modulate the reflected phase response via an external magnetic field, allowing focusing at different focal lengths. Full-wave simulations demonstrate that the metasurface exhibits distinct focusing characteristics depending on the applied magnetic field direction for a fixed right circularly polarized incident wave at 1.550 μm. Specifically, switching the external field from +0.2 T to -0.2 T changes the focal length by a factor of approximately two (from 7.16 mm to 13.76 mm). These findings demonstrate that magneto-optical metasurfaces offer a flexible, viable approach for non-mechanical, tunable focusing in compact reflective optical components.

AG-2026.04-2102

physics.optics

Generalized Optical Theorem for Structured Neutron Beams and Consequences for Forward-Transmission Null Tests of Time-Reversal Invariance

Sepehr Samiei

The simple form of the optical theorem of scattering theory, $σ_{\rm tot}^{\rm pw} = (4π/k)\,\Im f(0)$, is valid for an incident plane wave or for a wave packet whose Fourier components possess azimuthal symmetry about the incident wave vector $\vec{k}$. Previous work has shown that this expression can break down for structured beams of light which possess orbital angular momentum (OAM), despite the fact that there is clearly no violation of unitarity, and the relevant modifications have been worked out for the case of massless photons. We present a form of the optical theorem involving neutron OAM states for the case of the scattering of massive nonrelativistic particles. We apply this form to Ryndin's theorem on the application of time reversal symmetry to forward scattering, indicate how the statement of the null condition for T violation in forward scattering is modified, and show that this effect is negligible compared with other sources of systematic error in neutron optics transmission experiments.

AG-2026.04-2104

physics.optics

Nonlinear exceptional points in an integrated acoustic-wave oscillator for longwave infrared sensing

Linbo Shao, Zichen Xi, Zengyu Cen, Joseph G. Thomas, Dongyao Wang, Tanmay Singh, Liyan Zhu, Honghu Liu, Jun Ji, Yu Yao, Yizheng Zhu

Exceptional points (EP) featuring enhanced responsivity and rich dynamics have attracted extensive attentions in device developments and sensing applications. However, it remains debated whether employing EP systems is beneficial in practical sensing applications. Here, we demonstrate that a nonlinear EP in our microwave-frequency acoustic-wave oscillator improves longwave infrared (LWIR) detection under practical conditions. By phase tuning the nonlinear gain, our detector can be operated at different conditions with respect to the nonlinear EP. Compared with operation away from EP, our detector at EP shows a 33-fold improvement in responsivity and an 8.75-fold extension of 3-dB bandwidth. We observe a 6-fold enhancement in signal-to-noise ratio at an input modulation frequency of 6.2 kHz. At the incident LWIR wavelength of 9.6 um, our detector at EP exhibits a noise equivalent power (NEP) of 310 pW*Hz^-1/2 at input frequency of 10 kHz, yielding a figure of merit, product of NEP and time constant, of 9.87*10^-3 pW*Hz^-3/2, a 10-fold improvement over operation away from EP. Our integrated acoustic devices offer a versatile platform for exploring noise dynamics and developing practical sensors that exploit non-Hermitian nonlinearities.

AG-2026.04-1735

physics.optics

Optimized thermal control of a dual-wavelength-resonant nonlinear cavity

Fabian Meylahn, Henning Vahlbruch, Benno Willke

Optical resonator-enhanced nonlinear interactions are of great importance for the efficient generation of continuous-wave second harmonic generation, optical parametric oscillation, frequency mixing, and the generation of squeezed light. In order to maximize these interactions within the intra-cavity nonlinear material, high intensities, optimal phase matching, and simultaneous resonance of all interacting fields are required. However, the dispersion of the optical resonator often prevents the co-resonance of multiple wavelengths. Here, we present a novel implementation using a monolithic bimetallic heat sink for controlling the resonator dispersion based on a shallow temperature gradient directly applied to a section of the nonlinear crystal. This method enables precise dispersion control and is designed to minimize mechanical and thermal stresses in the nonlinear crystal, thus providing an additional method for designing highly efficient and reliable resonator-enhanced nonlinear devices for demanding applications such as gravitational wave detection, quantum optics, and frequency conversion.

AG-2026.04-1773

physics.optics

Polarization-preserving wavefront rotator

Suman Karan, Aman Srivastava, Pratham Sachin Todkar, Anand K. Jha

A K-mirror rotates the wavefront of an incident optical field. However, the rotation always introduces polarization changes in the transmitted field. This is a serious concern for applications ranging from astronomical image derotation to orbital angular momentum spectrum characterization in photonic quantum technology. Recent efforts have shown that the polarization change can be minimized significantly, but these require either a very small base angle that limits the field of view, or mirrors with a customized refractive index. Making the transmitted polarization state completely independent of the rotation angle has remained an open problem. In this work, we show that placing half-wave plates before and after a K-mirror and rotating them synchronously at half the K-mirror rotation angle makes the polarization change in the transmitted field exactly independent of the rotation angle. This works for any wavefront rotator, any base angle, any mirror refractive index, and any input state of polarization. We experimentally demonstrate the approach using a K-mirror with a base angle of $30^{\circ}$, which gives the largest field of view among practical designs, and find a mean polarization error of ~1%, limited only by the retardance imperfection of commercially available half-wave plates. This has significant practical implications for applications that require precise wavefront rotation without polarization change.

AG-2026.04-1789

physics.optics

Adaptive Sensing beyond Non-Adaptive Information Limits: End-to-End Co-Design of Geometry, Policy, and Inference

Arvin Keshvari, William Tuxbury, Zin Lin

Inverse design has made vast physical parameter spaces a substrate for emergent behavior. In sensing, the stakes of this principle are sharpest at the analog-to-digital boundary, where any information the hardware fails to capture is information no downstream algorithm can recover; hardware optimization alone is therefore not enough, and the geometry must be co-designed with a rule for what to measure next. We formulate this co-design as \emph{joint dynamic programming} (joint-DP): a single optimization over the continuous hardware geometry and a Bellman-optimal adaptive measurement policy. The outer hardware gradient is computed by differentiable dynamic programming with a sharp Bellman maximum, which the envelope theorem makes exact and bias-free, and a relaxation hierarchy carries the common framework from small discrete POMDPs to $10^5$-pixel photonic topologies. Across three case studies, joint-DP beats the natural baseline of its community by a large factor: on a radar beam-search POMDP, classical information-bound-guided geometry selection loses $2.8\times$ in attainable adaptive value; on a superconducting-qubit flux sensor, joint-DP reduces deployed mean-squared error by $11.3\times$ over the joint Bayesian Cramér--Rao baseline, with both geometries numerically co-optimized under their respective objectives; and on a $90{,}000$-pixel photonic metasensor, joint-DP via the Bayesian Fisher-information-matrix surrogate reduces deployed mean-squared error by $123\times$ relative to a randomized baseline. For any sensor whose hardware is designed once but whose policy runs for the device's lifetime, joint optimization of hardware and policy is the minimum principled procedure.

AG-2026.04-378

physics.optics

Mirror Surface Evaluation for the Einstein Telescope Using Virtual Mirror Maps

A. Bianchi, A. C. Green, J. Degallaix, F. A. Feldmann, A. Soflau, A. Freise

The performance of mirrors in optical interferometers is critically influenced by their surface quality. Accurate metrology enables mirror surfaces to be characterized through phase maps describing their three-dimensional structure after coating. In this work, we combine Zernike polynomial decomposition and spatial frequency (PSD) analysis with numerical optical simulations to quantify the impact of surface distortions on the reflected optical field. The method is validated using metrology data from mirrors currently installed in the Advanced Virgo gravitational-wave detector. Building on this validation, we introduce a framework for generating realistic virtual mirror maps that reproduce both low order aberrations and high spatial frequency content of measured surfaces. These virtual maps are used in optical simulations to systematically explore and compare candidate surface quality specifications for future detectors, with particular focus on the Einstein Telescope. Our results show that metrology-informed virtual mirrors provide a practical design tool to assess the impact of different surface specifications on optical performance, and to relate future requirements to the performance of existing interferometers.

AG-2026.02-762

physics.optics

Kerr rotation signature of nonlinear Maxwell electrodynamics under a uniform electromagnetic background

M. J. Neves, Pedro D. S. Silva

Nonlinear electrodynamics naturally arises in quantum field theory, where the electromagnetic vacuum behaves as an effective nonlinear optical medium, leading to phenomena such as vacuum birefringence and dichroism. Among the recently proposed models, modified Maxwell electrodynamics (ModMax) stands out as a conformally invariant nonlinear extension of Maxwell theory that preserves the fundamental symmetries of classical electrodynamics while predicting nontrivial optical effects. In this work, we investigate optical effects in ModMax electrodynamics in the presence of an external electromagnetic field. Considering uniform and constant magnetic and electric backgrounds, the solutions for the refractive indices are revisited. Using these results, we obtain the propagating modes and the phase shift (birefringence) for plane wave solutions in the presence of a pure magnetic background field. Afterwards, we investigate the Goos-Hänchen effect considering the interface between a simple dielectric and a medium whose electromagnetic response tensors are ruled by the ModMax electrodynamics. Further, based on the general reflection problem, we discuss the complex Kerr rotation with both the electric (E) and magnetic (B) background fields, considering two main cases: i) $B > E$ and ii) $E > B$. Our findings indicate that the $γ$ parameter and the ratios (B/E) and (E/B) play a central role in describing the Kerr signals (rotation and ellipticity) of systems with optical effects induced by nonlinear electromagnetic interactions.

AG-2026.01-490

physics.optics

Gravitational wave detectors from an experimental perspective

Marina Trad-Nery, Margherita Turconi, Walid Chaibi

This chapter introduces the fundamental principles of gravitational wave detectors in a simple and comprehensive manner. Because these instruments aim for extremely high sensitivity, it is essential to understand their various noise sources, how such noise couples to the detector output, and the strategies used to mitigate them. These noises contributions are computed in the frame of the Virgo detector and a sensitivity curve is calculated. Although a simplified layout of a gravitational wave detector is considered, it takes into account the most dominant effects and yields in a sensitivity estimate close to the what is observed in real detectors.

AG-2026.01-470

physics.optics

Experimental Realization of Optimized Ternary Mirror Coatings

V. Pierro, M. Granata, C. Michel, L. Pinard, B. Sassolas, D. Forest, N. Demos, S. Gras, M. Evans, I. M. Pinto, G. Avallone, V. Granata

We report on the first experimental realization of multi-material dielectric mirror coatings designed through a multi-objective optimization algorithm to simultaneously minimize thermal noise and optical losses. We validate this design strategy by fabricating and characterizing two distinct ternary systems: a SiNx -based proof-of-concept and a Ti:GeO2 -based system targeting lower optical losses. The performance of the SiN x coating shows remarkable agreement with predictions, demonstrating a noise amplitude spectral density reduction of 0.82 with respect to current reference coatings, and validating our design-to-fabrication pipeline. The Ti:GeO2 -based system achieves the crucial goal of sub-ppm absorption; its measured thermal noise, however, is higher than the theoretically predicted level of 0.71, extrapolated from single-layer material characterization. A dedicated tolerance analysis confirms that this discrepancy is not attributable to random thickness errors, emphasizing that further studies of the manufacturing process are needed to fully exploit this combination of materials. This work establishes a robust methodology for producing complex, high-performance optical coatings tailored for precision experiments.

AG-2026.01-188

physics.optics

Generalized Thermodynamics of Solitonic Event Horizons in Dispersive Field Theories

Hasan Oguz

The realization of Hawking radiation in optical analogs has historically focused on kinematic observables, such as the effective temperature determined by the horizon's surface gravity. A complete thermodynamic description, however, necessitates a rigorous definition of entropy and irreversibility, which has remained elusive in Hamiltonian optical systems. In this work, we bridge this gap by introducing an operational entropy for solitonic event horizons, derived from the spectral partitioning of the optical field into coherent solitonic and incoherent radiative subsystems. We demonstrate that the emission of resonant radiation -- mediated by the breaking of soliton integrability due to higher-order dispersion -- serves as a fundamental mechanism for entropy production. Numerical simulations of the generalized nonlinear Schrödinger equation confirm that this process satisfies a generalized second law, $ΔS_{\mathrm{tot}} \ge 0$. These results establish event horizons in dispersive field theories as consistent nonequilibrium thermodynamic systems, offering a new pathway to explore the information-theoretic aspects of analog gravity in laboratory settings.

AG-2025.12-1748

physics.optics

Simulating vacuum birefringence with a diffractive beam propagation code

Aimé Matheron, Michal Šmíd, Matt Zepf, Felix Karbstein

Ninety years after their prediction, quantum vacuum nonlinearities in macroscopic electromagnetic fields still await a direct experimental verification in the laboratory. A particularly promising route towards their first measurement is the collision of counter-propagating laser beams in a pump-probe type experiment. Here, the key challenge is to separate the small quantum vacuum signal at the oscillation frequency of the probe that is mainly emitted in the vicinity of its forward cone from the large probe background. While quantitatively accurate predictions of the associated quantum vacuum signals are available, to date there is no framework that combines these predictions with a diffractive beam propagation code. Such codes are designed to holistically model optical experiments and can reliably account for diffraction and absorption losses of optical devices, like lenses and apertures. The latter inevitably influence and modify both the induced signal and background components prior to their detection in experiment. The present work addresses this topical issue and reports on the first implementation of a quantum vacuum signals emission module in an established diffractive beam propagation toolkit designed for the realistic modelling of optical experiments.

AG-2025.12-379

physics.optics

Demonstrating sub-picometer non-reciprocity levels in the Three-Backlink Experiment for LISA

Jiang Ji Ho-Zhang, Melanie Ast, Lea Bischof, Michael Born, Daniel Jestrabek, Stefan Ast, Katharina-Sophie Isleif, Oliver Gerberding, Thomas S. Schwarze, Jens Reiche, Gerhard Heinzel, Karsten Danzmann

The current planned space-based gravitational-wave detectors require a bidirectional optical connection, referred to as Backlink, between two adjacent optical benches to provide a mutual phase reference for the local interferometric measurements. However, if the Backlink shows asymmetry between the two propagation directions, the effective optical pathlengths of the counter-propagating beams can introduce a differential phase noise, called non-reciprocity, into the main interferometric measurement that will limit the achievable accuracy in time-delay interferometry (TDI) post-processing. Hence, it is important to understand the properties of the Backlink to ensure that it will not compromise the interferometric detection. The Three-Backlink Experiment (3BL), which consists of an optical test facility with two rotatable benches, was designed under the Laser Interferometer Space Antenna (LISA) framework to study the performance of three Backlink configurations: two fiber-based and one free-beam scheme. In this paper, we report recent experimental results from the 3BL. We describe the commissioning and the subsequent noise mitigation. We achieve a setup noise floor below $1\text{ pm}\sqrt{\text{Hz}}$ across most of the LISA measurement band, and provide an understanding of the current technical limitations. With this low-noise baseline, we measured the performance of the three Backlink implementations under non-rotational conditions. We show that all three Backlinks reach sub-picometer non-reciprocity levels across most of the frequency band, with the remaining part dominated by the mentioned testbed noise. This enabled us to conduct a preliminary study of the Backlink inherent noise, where we emphasized on the backscatter noise intrinsic to a straightforward fiber-based Backlink, as this is the current baseline for LISA.

AG-2025.12-145

physics.optics

Geometry-Induced Vacuum Polarization and Mode Shifts in Maxwell-Klein-Gordon Theory

Li Wang, Jun Wang, Yong-Long Wang

Geometric confinement is known to modify single-particle dynamics through effective potentials, yet its imprint on the interacting quantum vacuum remains largely unexplored. In this work, we investigate the Maxwell--Klein--Gordon system constrained to curved surfaces and demonstrate that the geometric potential $Σ_{\mathrm{geom}}(\mathbf{r})$ acts as a local renormalization environment. We show that extrinsic curvature modifies the scalar loop spectrum, entering the vacuum polarization as a position-dependent mass correction $M^2(\mathbf{r}) \to m^2 + Σ_{\mathrm{geom}}(\mathbf{r})$. This induces a finite, gauge-invariant ``geometry-induced running'' of the electromagnetic response. In the long-wavelength regime ($|{\bf Q}|R \ll 1$), we derive a closed-form expression for the relative frequency shift $Δω/ω$, governed by the overlap between the electric energy density and the geometric potential. Applying this formalism to Gaussian bumps, cylindrical shells, and tori, we identify distinct spectral signatures that distinguish these quantum loop corrections from classical geometric optics. Our results suggest that spatial curvature can serve as a tunable knob for ``vacuum engineering,'' offering measurable shifts in high-$Q$ cavities and plasmonic systems.

AG-2025.12-1460

physics.optics

A Reduced Action Integral for Photon-Photon Interactions in Vacuum

D. Ramsey, M. S. Formanek, J. P. Palastro

Electromagnetic waves propagating through vacuum can polarize virtual electron-positron pairs; this polarization, in turn, nonlinearly modifies their propagation. A semi-classical nonlinear wave equation describing the propagation is derived from the Euler--Heisenberg Lagrangian density, which captures vacuum polarization effects up to the one-loop level. Here, we present a reduced-action-integral approach that enables rapid modeling of nonlinear phenomena arising from the Euler--Heisenberg Lagrangian. Application of the variational principle to the reduced action provides equations of motion for familiar light-pulse parameters, such as spot size, phase, polarization, and phase-front curvature, without requiring full-field simulations. Three examples demonstrate the utility of the approach: phase modulation, birefringence, and frequency mixing.

AG-2025.10-665

physics.optics

Non-uniform Birefringence in Highly-reflective Substrate-Transferred GaAs/Al$_{0.92}$Ga$_{0.08}$As Coatings at 1064 nm

Andri M. Gretarsson, Ambroise L. M. Juston, Benjamin Nicolai, Naomi Borg, Breck N. Meagher, Garrett D. Cole, GariLynn Billingsley, Camille N. Makarem, Elizabeth M. Gretarsson, Gregory M. Harry, Steven D. Penn

Using a custom-built scanning system, we generated maps of birefringence on reflection at $λ=1064$~nm from single-crystal GaAs/Al$_{0.92}$Ga$_{0.08}$As Bragg reflectors (henceforth ``AlGaAs coatings''). Ten coatings were bonded to fused silica substrates and one remained on the epitaxial growth wafer. The average phase difference on reflection between beams polarized along the fast and slow axes of the coating was found to be $ψ= 1.09 \pm 0.18$~mrad, consistent with values observed in high-finesse optical reference cavities using similar AlGaAs coatings. Scans of substrate-transferred coatings with diameters between 18 and 194 millimeters showed birefringence non-uniformity at a median level of $0.1$~mrad. A similar epitaxial multilayer that was not substrate transferred, but remained on the growth wafer, had by far the least birefringence non-uniformity of all mirrors tested at $0.02$~mrad. On the other hand, the average birefringence of the epi-on-wafer coating and substrate-transferred coatings was indistinguishable. Excluding non-uniformity found at the location of crystal and bonding defects, we conclude that the observed non-uniformity was imparted during the substrate transfer process, likely during bonding. Quantifying the impact on the scatter loss in a LIGO-like interferometer, we find that birefringence non-uniformity at the levels seen here is unlikely to have a significant impact on performance. Nonetheless, future efforts will focus on improved process control to minimize and ultimately eliminate the observed non-uniformity.

AG-2025.09-013

physics.optics

A matter of perspective: how nanoscale optical defects limit cosmic-scale gravitational wave observations

Anna C. Green, Antonella Bianchi, Daniel D. Brown, Felice Feldmann, Jeremie Gobeil, Miron van der Kolk, Riccardo Maggiore, Jonathan W. Perry, Emma Prins, Mischa Salle, Alina Soflau, Enzo Tapia, Andreas Freise

Ground-based gravitational-wave (GW) detectors, such as LIGO, Virgo, and KAGRA, have revolutionised as- tronomy. Now, future detectors like the Einstein Telescope and Cosmic Explorer aim to achieve even greater sensitivity. Advanced optical simulations are crucial to overcoming the challenges faced by these complex in- terferometers. Finesse, the leading interferometer simulation tool in the GW community, supports the design and commissioning of these detectors by modeling optical, quantum, and mechanical effects. A key focus is understanding optical defects that distort the shape of the laser light and limit detector performance. This work explores how nanoscale defects affect GW observations and presents recent advancements in modeling their effects to guide the development of next-generation detector optics.

AG-2025.08-255

physics.optics

Metric-Induced Principal Symbols in Nonlinear Electrodynamics

Érico Goulart, Eduardo Bittencourt

We present a geometrical formulation of nonlinear electrodynamics by expressing its principal symbol as an optical metric-induced object. Under the assumption of no birefringence, we show that the evolution of linear perturbations can be recast as a covariant divergence on a curved, field-dependent background, enabling the application of quantum field theory techniques as in Maxwell's theory in curved backgrounds. This geometric reformulation opens a new route for analogue models potentially implementable in laboratory via tailored nonlinear metamaterials.

AG-2025.08-009

physics.optics

Using tunable coherence for reaching micrometer coherence lengths and suppressing stray light in a power-recycled Michelson interferometer

Daniel Voigt, Oliver Gerberding

By reentering into laser interferometers, scattered or stray light introduces non-linear noise. This is a major limitation of precision interferometers as preventing such parasitic light is nearly impossible. Thus, substantial effort is put into mitigating the reentering of these fields in various ways. Ground-based laser interferometric gravitational wave detectors employ such mitigation techniques to reduce otherwise restrictive stray light noise. However, they are now reaching sensitivities where conventional mitigation techniques reach limitations. Further improvements planed for future observatories are placing even more demanding constraints on tolerable stray light power. We previously presented tunable coherence as a possible technique to ease these constraints and suppress unwanted coherent interference. For these promising demonstrations, the remaining coherence length and achievable suppression in length-constrained layouts was limited, among other things, by the used pseudo-random-noise phase modulation frequency. In this work, we demonstrate stray light suppression and cavity performance at modulation frequencies up to 10 GHz. This reduces the remaining coherence to a few centimeter in an interferometer, and even to the scale of the laser wavelength in a cavity. We further present a first demonstration of tunable coherence in a power-recycled Michelson interferometer, successfully suppressing stray light in a more complex topology.

AG-2025.04-783

physics.optics

Introduction of Vacuum Fields to Cavity with Diffraction Loss

Kurumi Umemura, Tomohiro Ishikawa, Kenji Tsuji, Shoki Iwaguchi, Yutaro Enomoto, Yuta Michimura, Kentaro Komori, Keiko Kokeyama, Seiji Kawamura

The space-based gravitational wave detector DECIGO is designed to observe primordial gravitational waves with 1,000 km Fabry-Perot cavities. Its sensitivity is limited by quantum noise, and although squeezing can suppress it, its effectiveness is reduced by diffraction-related loss, which leads to the injection of vacuum fields into the interferometer. This paper presents a rigorous treatment of quantum field propagation in the presence of diffraction and higher-order mode losses, deriving input-output relations, and modeling their impact via an optomechanical block diagram. The analysis shows that diffraction-induced vacuum fields slightly increase radiation pressure noise, while shot noise remains unaffected. Nevertheless, cavity detuning with homodyne detection yields a dip in the noise spectrum. By accurately capturing these effects, this framework enables a detailed study of sensitivity improvements made by either just detuning the main cavity while implementing homodyne detection, or by combining this with optical-spring quantum locking using auxiliary cavities, laying a firm foundation for enhancing DECIGO's capability to detect primordial gravitational waves.

AG-2025.04-562

physics.optics

High-Precision Lunar Corner-Cube Retroreflectors: A Wave-Optics Perspective

Slava G. Turyshev

High-precision corner-cube retroreflectors (CCRs) are critical for advanced lunar laser ranging (LLR) because they enable sub-millimeter-scale measurements of the Earth-Moon distance -- a level of precision essential for rigorous tests of relativistic gravitation and for advancing our understanding of lunar geophysics. In this work, we develop a comprehensive two-dimensional Fourier-optics model for single CCRs with apertures ranging from 80-110 mm. Our model incorporates realistic thermal-mechanical wavefront errors, detailed diffraction effects, and velocity aberration offsets. Our analysis reveals a strong coupling between aperture size and aberration angular offset: while larger CCRs deliver high on-axis flux under near-ideal conditions, their narrow diffraction lobes suffer significant flux loss at moderate aberration offsets, thereby favoring smaller apertures with broader main lobes. Furthermore, comparisons between solid fused-silica and hollow silicon-carbide (SiC) CCRs show that hollow designs not only achieve competitive or superior photon return -- particularly at 1064 nm, where phase errors are relatively reduced -- but also offer nearly an order-of-magnitude mass reduction for the same aperture sizes. These results establish a robust quantitative framework for optimizing CCR designs to perform at the sub-millimeter level under realistic lunar conditions and underscore the advantages of precision hollow SiC CCRs for next-generation LLR operations.

AG-2025.03-1381

physics.optics

Limitations of the paraxial beam model in the study of quantum vacuum signals

Felix Karbstein, Fabian Schütze

Studies of nonlinear quantum vacuum signals often model the driving laser fields as paraxial beams. This in particular holds for analytic approaches. While this allows for reliable predictions in most situations, there are also notable exceptions. A prominent example is the overestimation of the polarization-flipped signal photon yield in the collision of two equally focused, parallel polarized laser beams by a factor of about six. In the present work, we identify the origin of this deficiency and devise a strategy to obtain accurate closed-form expressions also in cases challenging the conventional (leading order) paraxial beam model. We demonstrate the potential of our approach on the example of two linearly polarized laser pulses colliding at a generic collision angle.

AG-2025.02-1323

physics.optics

Super light-by-light scattering in vacuum induced by intense vortex lasers

Zhigang Bu, Lingang Zhang, Shiyu Liu, Baifei Shen, Ruxin Li, Igor P. Ivanov, Liangliang Ji

Collision of ultra-intense optical laser and X-ray free electron laser (XFEL) pulses is a promising approach to detecting nonlinear vacuum polarization (VP), a long-standing prediction of quantum electrodynamics remaining to be tested. Identifying the signals induced by polarized vacuum relies on purifying the X-ray polarization and poses significant challenges due to strongly reduced signal and low signal-to-noise ratio (SNR). Here we propose an approach that allows one to directly detect VP signals without the need for an X-ray polarizer. We identify a new VP effect in collision of an X-ray probe with an intense laser in a vortex mode, which we call the super light-by-light scattering (super-LBL), through which signal photons are kicked out of the X-ray background with large tangential momentum. Super-LBL originates from the gradient force of the vortical vacuum current in azimuthal direction and induces momentum exchange beyond the transverse momentum of laser-photon. This effect efficiently sets the scattered signal photons apart from the X-ray background, producing observable signals with both the strength and SNR more than two orders of magnitude higher than those from the known VP effects. This finding paves the way for single-shot detection of nonlinear VP phenomena with current ultra-intense laser and XFEL technologies.

AG-2025.02-510

physics.optics

Scattered light reduction in Sagnac Speed Meters with Tunable Coherence

Leonie Eggers, Daniel Voigt, Oliver Gerberding

Sagnac Speed Meter and ring resonators can be used as high precision instruments, but they are limited in their sensitivity through scattered light causing non-linear noise. Here, we experimentally demonstrate a technique called Tunable Coherence, where the long coherence length of the laser is broken in a controlled way, to suppress the coupling of scattered light in a Sagnac interferometer. We demonstrate a scattered light suppression of 24.2 dB in a Sagnac interferometer and discuss the experimental limitations. Further, we show an analytical discussion on how Tunable Coherence could be a fundamental solution to light scattering back from optical surfaces into the counter propagating beam, which is an issue particularly in ring resonators.

AG-2025.01-549

physics.optics

Tunable coherence laser interferometry: demonstrating 40dB of straylight suppression and compatibility with resonant optical cavities

Daniel Voigt, Leonie Eggers, Katharina-Sophie Isleif, Sina M. Koehlenbeck, Melanie Ast, Oliver Gerberding

A major limitation of laser interferometers using continuous wave lasers are parasitic light fields, such as ghost beams, scattered or stray light, which can cause non-linear noise. This is especially relevant for laser interferometric ground-based gravitational wave detectors. Increasing their sensitivity, particularly at frequencies below 10 Hz, is threatened by the influence of parasitic photons. These can up-convert low-frequency disturbances into phase and amplitude noise inside the relevant measurement band. By artificially tuning the coherence of the lasers, using pseudo-random-noise (PRN) phase modulations, this influence of parasitic fields can be suppressed. As it relies on these fields traveling different paths, it does not sacrifice the coherence for the intentional interference. We demonstrate the feasibility of this technique experimentally, achieving noise suppression levels of 40 dB in a Michelson interferometer with an artificial coherence length below 30 cm. We probe how the suppression depends on the delay mismatch and length of the PRN sequence. We also prove that optical resonators can be operated in the presence of PRN modulation by measuring the behavior of a linear cavity with and without such a modulation. By matching the resonators round-trip length and the PRN sequence repetition length, the classic response is recovered.

AG-2024.12-997

physics.optics

Double rotatory power reversal, continuous Kerr angle, and enhanced reflectance in bi-isotropic media with anomalous Hall current

Alex Q. Costa, Pedro D. S. Silva, Manoel M. Ferreira

We investigate the optical properties of bi-isotropic materials under the anomalous Hall effect (AHE) of axion electrodynamics. Four refractive indices associated with circularly polarized waves are achieved, implying circular birefringence with rotatory power endowed with double sign reversal, an exotic optical signature for chiral dielectrics. The Kerr rotation and ellipticity are analyzed, with an unusual observation of a giant rotation angle deprived of discontinuity. Anomalous enhanced reflectance (R greater than unity) is also reported, associated with negative refraction stemming from the anomalous transport properties. These effects constitute the singular optical signature of a nonequilibrium bi-isotropic medium with the AHE.

AG-2024.10-1523

physics.optics

Interferometric Differential High-Frequency Lock-In Probe for Laser-Induced Vacuum Birefringence

R. G. Bullis, U. D. Jentschura, D. C. Yost

We propose a measurement of laser-induced vacuum birefringence through the use of pulsed lasers coupled to femtosecond optical enhancement cavities. This measurement technique features cavity-enhanced pump and probe pulses, as well as an independent control pulse. The control pulse allows for a differential measurement where the final signal is obtained using high-frequency lock-in detection, greatly mitigating time-dependent cavity birefringence as an important and possibly prohibitive systematic effect. In addition, the method features the economical use of laser power, and results in a relatively simple experimental setup.

AG-2024.09-110

physics.optics

A Snapshot of Relativistic Motion: Visualizing the Terrell Effect

Dominik Hornof, Victoria Helm, Enar de Dios Rodriguez, Thomas Juffmann, Philipp Haslinger, Peter Schattschneider

We present an experimental visualization of the Terrell effect, an optical phenomenon predicted in 1959 by Roger Penrose and James Terrell, which reveals that the Lorentz contraction of a moving object is not visible in a snapshot photograph. Using fs-laser pulses and a gated intensified camera that allows gating times as short as 300 ps, we achieve a virtual reduction of the speed of light to less than 2 m/s, enabling the visualisation of relativistically moving objects in real time. By capturing light reflected from deliberately Lorentz-contracted objects, our setup effectively reconstructs their visual appearance. This didactic visualization not only commemorates the centennial of Anton Lampa's seminal 1924 paper on relativistic length contraction but also provides the first experimental evidence of the Terrell effect in a laboratory setup. Our results comprise detailed relativistic illustrations, simulations and photographic snapshots of a sphere and a cube, which are animated to velocities close to the speed of light, revealing the apparent rotation effect and the distortion predicted by relativistic theory.

AG-2024.08-120

physics.optics

Propagation of pulsed light in an optical cavity in a gravitational field

Daniel D. Hickstein, David R. Carlson, Zachary L. Newman, Cecile Carlson, Carver Mead

All modern theories of gravitation, starting with Newton's, predict that gravity will affect the speed of light propagation. Einstein's theory of General Relativity famously predicted that the effect is twice the Newtonian value, a prediction that was verified during the 1919 solar eclipse. Recent theories of vector gravity can be interpreted to imply that gravity will have a different effect on pulsed light versus continuous-wave (CW) light propagating between the two mirrors of an optical cavity. Interestingly, we are not aware of any previous experiments to determine the relative effect of gravity on the propagation of pulsed versus CW light. In order to observe if there are small differences, we use a 6 GHz electro-optic frequency comb and low-noise CW laser to make careful measurements of the resonance frequencies of a high-finesse optical cavity. Once correcting for the effects of mirror dispersion, we determine that the cavity resonance frequencies for pulsed and CW light are the same to within our experimental error, which is on the order of $10^{-12}$ of the optical frequency, and one part in 700 of the expected gravitational shift.

AG-2024.08-1344

physics.optics

Low-depth, compact and error-tolerant photonic matrix-vector multiplication beyond the unitary group

S. A. Fldzhyan, M. Yu. Saygin, S. S. Straupe

Large-scale programmable photonic circuits are opening up new possibilities for information processing providing fast and energy-efficient means for matrix-vector multiplication. Here, we introduce a novel architecture of photonic circuits capable of implementing non-unitary transfer matrices, usually required by photonic neural networks, iterative equation solvers or quantum samplers. Our architecture exploits compact low-depth beam-splitter meshes rather than bulky fully connected mixing blocks used in previous designs, making it more compatible with planar integrated photonics technology. We have shown that photonic circuits designed with our architecture have lower depth than their standard counterparts and are extremely tolerant to hardware errors.

AG-2024.08-1325

physics.optics

Second-order nonlocal shifts of scattered wave-packets: What can be measured by Goos-Hänchen and Imbert-Fedorov effects ?

K. Morawetz

The scattering of wavepackets with arbitrary energy dispersion on surfaces has been analyzed. Expanding up to second order in scattering shifts, it is found that besides the known Goos-Hänchen or Imbert-Fedorov spatial offset, as well as the Wigner delay time, new momentum and frequency shifts appear. Furthermore, the width of the scattered wave packet becomes modified as well, which can lead to a shrinking of pulses by multiple scattering. For a model of dielectric material characterized by a longitudinal and transverse dielectric function the shifts are calculated analytically. From the Goos-Hänchen and Imbert-Fedorov shifts one can access the longitudinal and transversal dielectric function. Perfectly aligned crystal symmetry axes with respect to scattering beam shows no Imbert-Fedorov effect. It is found that the Goos-Hänchen and Imbert-Fedorov effect are absent for homogeneous materials. Oppositely it is found that the Wigner delay time and the shrinking of the temporal pulse width allows to access the dielectric function independent on the beam geometry.

AG-2024.08-1318

physics.optics

Silicon Double-Disk Optomechanical Resonators from Wafer-Scale Double-Layered Silicon-on-Insulator

Amy Navarathna, Benjamin J. Carey, James S. Bennett, Soroush Khademi, Warwick P. Bowen

Whispering gallery mode (WGM) optomechanical resonators are a promising technology for the simultaneous control and measurement of optical and mechanical degrees of freedom at the nanoscale. They offer potential for use across a wide range of applications such as sensors and quantum transducers. Double-disk WGM resonators, which host strongly interacting mechanical and optical modes co-localized around their circumference, are particularly attractive due to their high optomechanical coupling. Large-scale integrated fabrication of silicon double-disk WGM resonators has not previously been demonstrated. In this work we present a process for the fabrication of double-layer silicon-on-insulator wafers, which we then use to fabricate functional optomechanical double silicon disk resonators with on-chip optical coupling. The integrated devices present an experimentally observed optical quality factors of the order of 10^5 and a single-photon optomechanical coupling of approximately 15 kHz.

AG-2024.07-2498

physics.optics

Quantum efficiency and vertical position of quantum emitters in hBN determined by Purcell effect in hybrid metal-dielectric planar photonic structures

Domitille Gérard, Aurélie Pierret, Helmi Fartas, Bruno Bérini, Stéphanie Buil, Jean-Pierre Hermier, Aymeric Delteil

Color centers in hexagonal boron nitride (hBN) advantageously combine excellent photophysical properties with a potential for integration in highly compact devices. Progress towards scalable integration necessitates a high quantum efficiency and an efficient photon collection. In this context, we compare the optical characteristics of individual hBN color centers generated by electron irradiation, in two different electromagnetic environments. We keep track of well-identified emitters that we characterize before and after dry transfer of exfoliated crystals. This comparison provides information about their quantum efficiency - which we find close to unity - as well as their vertical position in the crystal with nanometric precision, which we find away from the flake surfaces. Our work suggests hybrid dielectric-metal planar structures as an efficient tool for characterizing quantum emitters in addition to improving the count rate, and can be generalized to other emitters in 2D materials or in planar photonic structures.

AG-2024.07-998

physics.optics

Plasmonic Time Crystals

Joshua Feinberg, David E. Fernandes, Boris Shapiro, Mario G. Silveirinha

We study plasmonic time crystals, an extension of dielectric-based photonic time crystals to plasmonic media. Remarkably, we demonstrate that such systems may amplify both longitudinal and transverse modes. In particular, we show that plasmonic time crystals support \emph{collective resonances} of longitudinal modes, which occur independently of the wave vector $k$, even in the presence of significant dissipation. These resonances originate from the coupling between the positive- and negative-frequency branches of the plasmonic dispersion relation of the unmodulated system and from the divergence of the density of states near the plasma ($\varepsilon$-near zero) frequency $ω_p$. The strongest resonance arises at a modulation frequency $Ω= 2 ω_p$, corresponding to a direct interband transition. We demonstrate these resonances for various periodic modulation profiles and provide a generic perturbative formula for resonance widths in the weak modulation limit. Furthermore, we propose transparent conducting oxides as promising platforms for realizing plasmonic time crystals, as they enable significant modulation of the electron effective mass while maintaining moderate dissipation levels. Our findings provide new insights into leveraging time-modulated plasmonic media to enhance optical gain and control wave dynamics at the nanoscale.

AG-2024.07-2456

physics.optics

Giant Purcell broadening and Lamb shift for DNA-assembled near-infrared quantum emitters

Sachin Verlekar, Maria Sanz-Paz, Mario Zapata-Herrera, Mauricio Pilo-Pais, Karol Kolataj, Ruben Esteban, Javier Aizpurua, Guillermo Acuna, Christophe Galland

Controlling the light emitted by individual molecules is instrumental to a number of novel nanotechnologies ranging from super-resolution bio-imaging and molecular sensing to quantum nanophotonics. Molecular emission can be tailored by modifying the local photonic environment, for example by precisely placing a single molecule inside a plasmonic nanocavity with the help of DNA origami. Here, using this scalable approach, we show that commercial fluorophores experience giant Purcell factors and Lamb shifts, reaching values on par with those recently reported in scanning tip experiments. Engineering of plasmonic modes enables cavity-mediated fluorescence far detuned from the zero-phonon-line (ZPL) - at detunings that are up to two orders of magnitude larger than the fluorescence linewidth of the bare emitter and reach into the near-infrared. Our results evidence a regime where the emission linewidth is dominated by the excited state lifetime, as required for indistinguishable photon emission, baring relevance to the development of nanoscale, ultrafast quantum light sources and to the quest toward single-molecule cavity-QED. In the future, this approach may also allow to design efficient quantum emitters at infrared wavelengths, where standard organic sources have a reduced performance.

AG-2024.07-2451

physics.optics

Geometric Phases in Optics: Polarization of Light Propagating in Helical Optical Fibers

Y. B. Band, Igor Kuzmenko, Yshai Avishai

The geometric phase in optics (GPIO) is directly associated with the polarization of light. We investigate the physical principles underlying the occurrence of the GPIO for a single-mode light beam propagating in a single-mode optical fiber wound into a circular helix configuration, with and without stress-induced birefringence. The effects of the curvature and torsion of the helical fiber on the rotation of the polarization vector and the associated GPIO are discussed. Analytic expressions are derived for the polarization vector and Stokes parameters for any initial polarization state of the light entering the helical fiber, as well as for the GPIO of the light as a function of helix arc-length. Additionally, the intensity of a superposition of the initial and final beams, which depends on the final GPIO, is derived. Furthermore, the relationship between the GPIO and the solid angle subtended by the tangent vector of the helix plotted on the Poincaré sphere is analyzed, and the effects of fluctuations of the parameters specifying the geometry and the material characteristics of the helical fiber on the GPIO are considered.

AG-2024.07-2426

physics.optics

Switching, Amplifying, and Chirping Diode Lasers with Current Pulses for High Bandwidth Quantum Technologies

Gianni Buser

A series of simple and low-cost devices for switching, amplifying, and chirping diode lasers based on current modulation are presented. Direct modulation of diode laser currents is rarely sufficient to establish precise amplitude and phase control over light, as its effects on these parameters are not independent. These devices overcome this limitation by exploiting amplifier saturation and dramatically outperform commonly used external modulators in key figures of merit for quantum technological applications. Semiconductor optical amplifiers operated on either rubidium D line are recast as intensity switches and shown to achieve ON:OFF ratios $>10^6$ in as little as 50 ns. Current is switched to a 795 nm wavelength (Rb D1) tapered amplifier to produce optical pulses of few nanosecond duration and peak powers of 3 W at a similar extinction ratio. Fast rf pulses are applied directly to a laser diode to shift its emission frequency by up to 300 MHz in either direction and at a maximum chirp rate of 150 MHz/ns. Finally, the latter components are combined, yielding a system that produces watt-level optical pulses with arbitrary frequency chirps in the given range and <2% residual intensity variation, all within 65 ns upon asynchronous demand. Such systems have broad application in atomic, molecular, and optical physics, and are of particular interest to fast experiments simultaneously requiring high power and low noise, for example quantum memory experiments with atomic vapors.

AG-2024.07-2345

physics.optics

Feedback Intensity Equalization Algorithm for Multi-Spots Holographic Tweezer

Shaoxiong Wang, Yifei Hu, Yaoting Zhou, Peng Lan, Zhongxiao Xu

High degree of adjustability enables the holographic tweezer array a versatile platform for creating an arbitrary geometrical atomic array. In holographic tweezer array experiments, an optical tweezer generated by a spatial light modulator (SLM) usually is used as a static tweezer array. However, the alternating current (AC) stark effect generally induces the intensity difference of traps in terms of different light shifts. So, intensity equalization is an essential prerequisite for preparing a many-body system with individually controlled atoms. Here, we report an intensity equalization algorithm. In particular, we observe the non-uniformity of the tweezer array is below 1.1% when the array size is larger than 1000. Our analysis shows that by optimizing the hardware performance of the optical system, this uniformity could be further improved. Our work offers the opportunities for large-scale quantum computation and simulation with reconfigurable atom arrays.

AG-2024.07-2255

physics.optics

Integrated Mode-Hop-Free Tunable Lasers at 780 nm for Chip-Scale Classical and Quantum Photonic Applications

Joshua E. Castro, Eber Nolasco-Martinez, Paolo Pintus, Zeyu Zhang, Boqiang Shen, Theodore Morin, Lillian Thiel, Trevor J. Steiner, Nicholas Lewis, Sahil D. Patel, John E. Bowers, David M. Weld, Galan Moody

In the last decade, remarkable advances in integrated photonic technologies have enabled table-top experiments and instrumentation to be scaled down to compact chips with significant reduction in size, weight, power consumption, and cost. Here, we demonstrate an integrated continuously tunable laser in a heterogeneous gallium arsenide-on-silicon nitride (GaAs-on-SiN) platform that emits in the far-red radiation spectrum near 780 nm, with 20 nm tuning range, <6 kHz intrinsic linewidth, and a >40 dB side-mode suppression ratio. The GaAs optical gain regions are heterogeneously integrated with low-loss SiN waveguides. The narrow linewidth lasing is achieved with an extended cavity consisting of a resonator-based Vernier mirror and a phase shifter. Utilizing synchronous tuning of the integrated heaters, we show mode-hop-free wavelength tuning over a range larger than 100 GHz (200 pm). To demonstrate the potential of the device, we investigate two illustrative applications: (i) the linear characterization of a silicon nitride microresonator designed for entangled-photon pair generation, and (ii) the absorption spectroscopy and locking to the D1 and D2 transition lines of 87-Rb. The performance of the proposed integrated laser holds promise for a broader spectrum of both classical and quantum applications in the visible range, encompassing communication, control, sensing, and computing.

AG-2024.07-2180

physics.optics

Correlation Hyperspectral Imaging

Gianlorenzo Massaro, Francesco V. Pepe, Milena D'Angelo

Hyperspectral imaging aims at providing information on both the spatial and the spectral distribution of light, with high resolution. However, state-of-the-art protocols are characterized by an intrinsic trade-off imposing to sacrifice either resolution or image acquisition speed. We address this limitation by exploiting light intensity correlations, which are shown to enable overcoming the typical downsides of traditional hyperspectral imaging techniques, both scanning and snapshot. The proposed approach also opens possibilities that are not otherwise achievable, such as sharper imaging and natural filtering of broadband spectral components that would otherwise hide the spectrum of interest. The enabled combination of high spatial and spectral resolution, high speed, and insensitivity to undesired spectral features shall lead to a paradigm change in hyperspectral imaging devices and open-up new application scenarios.

AG-2024.07-2143

physics.optics

Quadrature-Dependent Lattice Dynamics of Dissipative Microcombs

Eran Lustig, Melissa A. Guidry, Daniil M. Lukin, Shanhui Fan, Jelena Vuckovic

The study of coupled networks with parametric amplification of the vacuum fluctuations has garnered increasing interest due to its intricate physics and potential applications. In these systems, parametric interactions lead to beam-splitter coupling and two-mode squeezing, creating quadrature-dependent dynamics. These systems can be modeled as bosonic networks, arrays or lattices, exhibiting exotic effects such as unidirectional amplification and non-Hermitian chiral transport which influence multimode squeezing. However, exploring and controlling these network dynamics experimentally in all-optical systems remains challenging. Recent advancements in integrated nonlinear micro-resonators, known as Kerr microcombs, enable the generation and control of broadband high-repetition pulses on microchips. Kerr microcombs exhibit intriguing nonlinear dynamics, where coherent photons occupy discrete spectral lines, leading to multimode squeezed vacuum states. In this work, we explore the lattice dynamics of vacuum fluctuations driven by dissipative Kerr microcombs. We design a photonic chip where a spontaneously emergent pair of pulses creates extended multimode states of parametrically amplified vacuum fluctuations. These states exhibit oscillatory dynamics, with implications on squeezing and secondary comb formation. By employing integrated micro-heaters, we tune the vacuum fluctuations to eliminate the oscillations, establishing a fundamental connection between non-Hermitian lattice symmetries and Kerr combs, paving the way for exotic quadrature-dependent optical networks with broad implications for quantum and classical photonic technologies.

AG-2024.07-2086

physics.optics

Optical Mode Control, Switching and Shaping In Few Mode Fiber Using a Fiber Piano

Shuin Jian Wu, Anindya Banerji, Ankush Sharma, Zohar Finkelstein, Ronen Shekel, Yaron Bromberg, Alexander Ling

This work investigates the use of a fiber piano in controlling spatial modes in few mode fibers. It has been found that together with sub-optimal coupling into SMF-28 fibre and half and quarter waveplates, the fiber piano is capable of producing and reproducing desired spatial modes up to $LP_{11}$ when using 808 nm light and up to $LP_{21}$ when using 632.8 nm light. The control of spatial mode profile extends down to the single photon level. This is demonstrated with the help of correlated photon pairs generated via spontaneous parametric down conversion.

AG-2024.07-2076

physics.optics

Hexagonal boron nitride based photonic quantum technologies

Madhava Krishna Prasad, Mike P. C. Taverne, Chung-Che Huang, Jonathan D. Mar, Ying-Lung Daniel Ho

Hexagonal boron nitride is rapidly gaining interest as a platform for photonic quantum technologies, due to its two-dimensional nature and its ability to host defects deep within its large band gap that may act as room-temperature single-photon emitters. In this review paper we provide an overview of (1) the structure, properties, growth and transfer of hexagonal boron nitride; (2) the creation and assignment of colour centres in hexagonal boron nitride for applications in photonic quantum technologies; and (3) heterostructure devices for the electrical tuning and charge control of colour centres that form the basis for photonic quantum technology devices. The aim of this review is to provide readers a summary of progress in both defect engineering and device fabrication in hexagonal boron nitride based photonic quantum technologies.

AG-2024.07-2052

physics.optics

Nonreciprocal Single-Photon Band Structure in a Coupled-Spinning-Resonator chain

Jing Li, Ya Yang, Xun Wei Xu, Jing Lu, Hui Jing, Lan Zhou

We analyze the single-photon band structure and the transport of a single photon in a one-dimensional coupled-spinning-resonator chain. The time-reversal symmetry of the resonators chain is broken by the spinning of the resonators, instead of external or synthetic magnetic field. Two nonreciprocal single-photon band gaps can be obtained in the coupled-spinning-resonator chain, whose width depends on the angular velocity of the spinning resonator. Based on the nonreciprocal band gaps, we can implement a single photon circulator at multiple frequency windows, and the direction of photon cycling is opposite for different band gaps. In addition, reciprocal single-photon band structures can also be realized in the coupled-spinning-resonator chain when all resonators rotate in the same direction with equal angular velocity. Our work open a new route to achieve, manipulate, and switch nonreciprocal or reciprocal single-photon band structures, and provides new opportunities to realize novel single-photon devices.

AG-2024.07-258

physics.optics

Quantum backreaction effect in optical solitons

Sang-Shin Baak, Friedrich Koenig

Optical solitons classically are stationary solutions of the nonlinear Schrödinger equation. We perform a quantum field theoretic treatment by quantising a linearised fluctuation field around the classical soliton solution which can be seen as providing a background spacetime for the field. The linearised fluctuation modifies the soliton background, which is often neglected, reminiscent of the nondepleted-pump approximation. Going beyond this approximation and by using a number-conserving Bogoliubov approach, we find unstable modes that grow as the soliton propagates. Eventually, these unstable modes induce a considerable (backreaction) effect in the soliton. We calculate the backreaction in the classical field fully analytically in the leading second order. The result is a quadratic local decrease of the soliton photon number in propagation due to the backreaction effect of the unstable mode. Provided the initial pulse is close to the classical soliton solution, the unstable mode contributions always become dominant. We also consider practical scenarios for observing this quantum-induced soliton distortion, in the spectral domain. The backreaction, which we expect to be present in bright and dark, discrete and continuous solitons and other nonlinear pulses plays an important role in future optical analogue gravity experiments, for soliton lasers, and optical communications.

AG-2024.07-1955

physics.optics

Tunable frequency conversion in doped photonic crystal fiber pumped near degeneracy

Leah R Murphy, Mateusz J Olszewski, Petros Androvitsaneas, Miguel Alvarez Perez, Will A M Smith, Anthony J Bennett, Peter J Mosley, Alex O C Davis

Future quantum networks will rely on the ability to coherently transfer optically encoded quantum information between different wavelength bands. Bragg-scattering four-wave mixing in optical fiber is a promising route to achieving this, but requires fibers with precise dispersion control and broadband transmission at signal, target and pump wavelengths. Here we introduce a photonic crystal fiber with a germanium-doped core featuring group velocity matching at 1550 nm, the telecoms C-band, and 920 nm, within the emission range of efficient single photon sources based on InAs quantum dots. With low chromatic walk-off and good optical guidance even at long wavelengths, large lengths of this fiber are used to achieve nanometer-scale frequency shifts between wavelengths around 920 nm with up to 79.4\% internal conversion efficiency, allowing dissimilar InAs dots to be interfaced. We also show how cascading this frequency conversion can be used to generate a frequency comb away from telecoms wavelengths. Finally, we use the fiber to demonstrate tunable frequency conversion of weak classical signals around 918 nm to the telecoms C-band.

AG-2024.07-1948

physics.optics

Encoding arbitrary Ising Hamiltonians on Spatial Photonic Ising Machines

Jason Sakellariou, Alexis Askitopoulos, Georgios Pastras, Symeon I. Tsintzos

Photonic Ising Machines constitute an emergent new paradigm of computation, geared towards tackling combinatorial optimization problems that can be reduced to the problem of finding the ground state of an Ising model. Spatial Photonic Ising Machines have proven to be advantageous for simulating fully connected large-scale spin systems. However, fine control of a general interaction matrix $J$ has so far only been accomplished through eigenvalue decomposition methods that either limit the scalability or increase the execution time of the optimization process. We introduce and experimentally validate a SPIM instance that enables direct control over the full interaction matrix, enabling the encoding of Ising Hamiltonians with arbitrary couplings and connectivity. We demonstrate the conformity of the experimentally measured Ising energy with the theoretically expected values and then proceed to solve both the unweighted and weighted graph partitioning problems, showcasing a systematic convergence to an optimal solution via simulated annealing. Our approach greatly expands the applicability of SPIMs for real-world applications without sacrificing any of the inherent advantages of the system, and paves the way to encoding the full range of NP problems that are known to be equivalent to Ising models, on SPIM devices.

AG-2024.07-1898

physics.optics

Generalized flux trajectories: New insights into partially coherent Airy beams

A. S. Sanz, R. Martínez-Herrero

The propagation of Airy beams in free space is characterized by being non dispersive, which warrants the shape invariance of their intensity distribution, and self-accelerating along the transverse direction. These distinctive traits are still present in partially coherent Airy beams as long as the reach of their back tail (and hence their energy content) is not importantly reduced. To investigate the effects associated with the decrease of the beam coherence and its power content (by smoothly reducing the reach of their back tails), here we introduce a novel and insightful methodology based on a generalization of the concept of flux trajectory for paraxial partially coherent beams. This methodologies emphasizes the role of phase relations, thus helping to clarify why and how the beam smears out spatially along its propagation. This formalism, though, is general enough to tackle other types of structured light beams with whatever degree of partial coherence, from full coherence to total incoherence.

AG-2024.07-710

physics.optics

Optical reflection signature of an axion dielectric with magnetic current

Pedro D. S. Silva, Ronald A. Pereira, Manoel M. Ferreira

In this work, we investigate the reflection properties on the interface between an ordinary dielectric medium and a dielectric supporting a magnetic current (equivalent to a dielectric governed by axion electrodynamics). Considering the usual Maxwell equations and constitutive relations, we derive the general Fresnel coefficients for reflection for an incident wave with $s$ and $p$ polarization, assuming an isotropic magnetic current on a dielectric substrate. We determine all total internal reflection and critical angles (Brewster angles) conditions, which are given by strict relations between all relevant electromagnetic quantities of the system and the frequency. For $s$- and $p$-polarized incident waves, total internal reflection can occur under certain conditions on the constitutive parameters (for each propagating mode) at specific frequency windows and certain incidence angle intervals. All possible conditions to define critical angles for null reflection are determined. This scenario allows polarization changes by reflection. Considering a $p$-polarized incident wave, the frequency and the Brewster angle, allowing null reflection for both propagating modes, are determined. The Goos-Hänchen shift and the complex Kerr rotation are also evaluated. The Kerr ellipticity angle presents a frequency-dependent behavior, also reported in Weyl semimetals, having maximum values $η_{Kerr}=\pm π/4$ for specific values of frequency, which may work as a signature of this axion chiral dielectric.

AG-2024.07-1779

physics.optics

Continuous-Wave Nonlinear Polarization Control and Signatures of Criticality in a Perovskite Cavity

G. Keijsers, R. M. de Boer, B. Verdonschot, K. J. H. Peters, Z. Geng, S. R. K. Rodriguez

Halide perovskites have emerged as promising photonic materials for fundamental physics studies and technological applications. Their potential for nonlinear optics has also drawn great interest recently; yet, to date, continuous-wave (CW) nonlinearities have remained elusive. Here we demonstrate CW nonlinear phenomena in a CsPbBr$_3$ perovskite cavity. We first demonstrate optical bistability -- the hallmark of single-mode coherent nonlinear optics. Next we exploit the interplay of nonlinearity and birefringence to demonstrate nonlinear control over the polarization of light. Finally, by measuring the optical hysteresis of our cavity as a function of temperature, we find a dramatic enhancement of the nonlinearity around 65 K. This enhancement is indicative of a phase transition in CsPbBr$_3$. Our results position CsPbBr$_3$ cavities as an exceptional platform for nonlinear optics, offering strong CW nonlinearity and birefringence which are furthermore tunable. In addition, our approach to uncover a phase transition of matter via optical hysteresis measurements is promising for exploring strongly correlated states of light-matter systems.

AG-2024.07-1756

physics.optics

Towards the Quantum Limits of Phase Retrieval

Jacob Trzaska, Amit Ashok

We consider the problem of determining the spatial phase profile of a single-mode electromagnetic field. Our attention is on input states that are a statistical mixture of displaced and squeezed number states, a superset of Gaussian states. In particular, we derive the quantum Fisher information matrix (QFIM) for estimating the expansion coefficients of the wavefront in an orthonormal basis, finding that it is diagonal. Moreover, we show that a measurement saturating the QFIM always exists, and point to an adaptive strategy capable of implementing it. We then construct the optimal measurements for three particular states: mixtures of photon number, coherent, and single-mode squeezed vacuum states. Sensitivity of the measurements to nuisance parameters is explored.

AG-2024.07-1740

physics.optics

Broadband Entangled-Photon Pair Generation with Integrated Photonics: Guidelines and A Materials Comparison

Liao Duan, Trevor J. Steiner, Paolo Pintus, Lillian Thiel, Joshua E. Castro, John E. Bowers, Galan Moody

Correlated photon-pair sources are key components for quantum computing, networking, and sensing applications. Integrated photonics has enabled chip-scale sources using nonlinear processes, producing high-rate entanglement with sub-100 microwatt power at telecom wavelengths. Many quantum systems operate in the visible or near-infrared ranges, necessitating broadband visible-telecom entangled-pair sources for connecting remote systems via entanglement swapping and teleportation. This study evaluates broadband entanglement generation through spontaneous four-wave mixing in various nonlinear integrated photonic materials, including silicon nitride, lithium niobate, aluminum gallium arsenide, indium gallium phosphide, and gallium nitride. We demonstrate how geometric dispersion engineering facilitates phase-matching for each platform and reveals unexpected results, such as robust designs to fabrication variations and a Type-1 cross-polarized phase-matching condition for III-V materials that expands the operational bandwidth. With experimentally attainable parameters, integrated photonic microresonators with optimized designs can achieve pair generation rates greater than ~1 THz/mW$^2$.

AG-2024.07-1679

physics.optics

Topological phase transitions via attosecond x-ray absorption spectroscopy

Juan F. P. Mosquera, Giovanni Cistaro, Mikhail Malakhov, Emilio Pisanty, Alexandre Dauphin, Luis Plaja, Alexis Chacón, Maciej Lewenstein, Antonio Picón

We present a numerical experiment that demonstrates the possibility to capture topological phase transitions via an x-ray absorption spectroscopy scheme. We consider a Chern insulator whose topological phase is tuned via a second-order hopping. We perform time-dynamics simulations of the out-of-equilibrium laser-driven electron motion that enables us to model a realistic attosecond spectroscopy scheme. In particular, we use an ultrafast scheme with a circularly polarized IR pump pulse and an attosecond x-ray probe pulse. A laser-induced dichroism-type spectrum shows a clear signature of the topological phase transition. We are able to connect these signatures with the Berry structure of the system. This work extend the applications of attosecond absorption spectroscopy to systems presenting a non-trivial topological phase.

AG-2024.07-1670

physics.optics

Barium Titanate and Lithium Niobate Permittivity and Pockels Coefficients from MHz to Sub-THz Frequencies

Daniel Chelladurai, Manuel Kohli, Joel Winiger, David Moor, Andreas Messner, Yuriy Fedoryshyn, Mohammed Eleraky, Yuqi Liu, Hua Wang, Juerg Leuthold

The Pockels effect is essential for controlling optical signals at the highest speeds, particularly for electro-optic modulators in photonic integrated circuits. Lithium niobate (LN) and barium titanate (BTO) are two excellent Pockels materials to this end. Here, we measure the Pockels coefficients and permittivity in LN and BTO over a continuous frequency range from 100 MHz to 330 GHz. These properties are constant across this frequency range in LN but have a significant frequency dependence in BTO. Still, our measurements show that BTO has remarkably large electro-optic properties compared to LN. Furthermore, we show how BTO devices can be designed with a flat electro-optic frequency response despite the Pockels coefficient dispersion. Finally, we expound our method for broadband characterization of these vital electro-optic properties, utilizing specialized integrated electro-optic phase shifters. Altogether, this work empowers the design of high-speed BTO devices and the development of new electro-optic materials.

AG-2024.07-1636

physics.optics

Dielectric Fano Nanoantennas for Enabling Sub-Nanosecond Lifetimes in NV-based Single Photon Emitters

Shu An, Dmitry Kalashnikov, Wenqiao Shi, Zackaria Mahfoud, Ah Bian Chew, Yan Liu, Jing Wu, Di Zhu, Weibo Gao, Cheng-Wei Qiu, Victor Leong, Zhaogang Dong

Solid-state quantum emitters are essential sources of single photons, and enhancing their emission rates is of paramount importance for applications in quantum communications, computing, and metrology. One approach is to couple quantum emitters with resonant photonic nanostructures, where the emission rate is enhanced due to the Purcell effect. Dielectric nanoantennas are promising as they provide strong emission enhancement compared to plasmonic ones, which suffer from high Ohmic loss. Here, we designed and fabricated a dielectric Fano resonator based on a pair of silicon (Si) ellipses and a disk, which supports the mode hybridization between quasi-bound-states-in-the-continuum (quasi-BIC) and Mie resonance. We demonstrated the performance of the developed resonant system by interfacing it with single photon emitters (SPEs) based on nitrogen-vacancy (NV-) centers in nanodiamonds (NDs). We observed that the interfaced emitters have a Purcell enhancement factor of ~10, with sub-ns emission lifetime and a polarization contrast of 9. Our results indicate a promising method for developing efficient and compact single-photon sources for integrated quantum photonics applications.

AG-2024.07-1626

physics.optics

A versatile quantum microwave photonic signal processing platform based on coincidence window selection technique

Xinghua Li, Yifan Guo, Xiao Xiang, Runai Quan, Mingtao Cao, Ruifang Dong, Tao Liu, Ming Li, Shougang Zhang

Quantum microwave photonics (QMWP) is an innovative approach that combines energy-time entangled biphoton sources as the optical carrier with time-correlated single-photon detection for high-speed RF signal recovery. This groundbreaking method offers unique advantages such as nonlocal RF signal encoding and robust resistance to dispersion-induced frequency fading. This paper explores the versatility of processing the quantum microwave photonic signal by utilizing coincidence window selection on the biphoton coincidence distribution. The demonstration includes finely-tunable RF phase shifting, flexible multi-tap transversal filtering (with up to 15 taps), and photonically implemented RF mixing, leveraging the nonlocal RF mapping characteristic of QMWP. These accomplishments significantly enhance the capability of microwave photonic systems in processing ultra-weak signals, opening up new possibilities for various applications.

AG-2024.07-1623

physics.optics

Quantum microwave photonic mixer with a large spurious-free dynamic range

Xinghua Li, Yifan Guo, Xiao Xiang, Runai Quan, Mingtao Cao, Ruifang Dong, Tao Liu, Ming Li, Shougang Zhang

As one of the most fundamental functionalities of microwave photonics, microwave frequency mixing plays an essential role in modern radars and wireless communication systems. However, the commonly utilized intensity modulation in the systems often leads to inadequate spurious-free dynamic range (SFDR) for many sought-after applications. Quantum microwave photonics technique offers a promising solution for improving SFDR in terms of higher-order harmonic distortion. In this paper, we demonstrate two types of quantum microwave photonic mixers based on the configuration of the intensity modulators: cascade-type and parallel-type. Leveraging the nonlocal RF signal encoding capability, both types of quantum microwave photonic mixers not only exhibit the advantage of dual-channel output but also present significant improvement in SFDR. Specifically, the parallel-type quantum microwave photonic mixer achieves a remarkable SFDR value of 113.6 dB.Hz1/2, which is 30 dB better than that of the cascade-type quantum microwave photonic mixer. When compared to the classical microwave photonic mixer, this enhancement reaches a notable 53.6 dB at the expense of 8 dB conversion loss. These results highlight the superiority of quantum microwave photonic mixers in the fields of microwave and millimeter-wave systems. Further applying multi-photon frequency entangled sources as optical carriers, the dual-channel microwave frequency conversion capability endowed by the quantum microwave photonic mixer can be extended to enhance the performance of multiple-paths microwave mixing which is essential for radar net systems.

AG-2024.07-1574

physics.optics

Non-Hermitian dynamical topological winding in photonic mesh lattices

Stefano Longhi

Topological winding in non-Hermitian systems are generally associated to the Bloch band properties of lattice Hamiltonians. However, in certain non-Hermitian models topological winding naturally arise from the dynamical evolution of the system and related to a new form of geometric phase. Here we investigate dynamical topological winding in non-Hermitian photonic mesh lattices, where the mean survival time of an optical pulse circulating in coupled fiber loops is quantized and robust against Hamiltonian deformations. The suggested photonic model could provide an experimentally accessible platform for the observation of non-Hermitian dynamical topological windings.

AG-2024.06-2407

physics.optics

CMOS-fabricated ultraviolet light modulators using low-loss alumina piezo-optomechanical photonic circuits

Zachary A. Castillo, Roman Shugayev, Daniel Dominguez, Michael Gehl, Nicholas Karl, Andrew Leenheer, Bethany Little, Yuan-Yu Jau, Matt Eichenfield

Ultra-violet (UV) and near-UV wavelengths are necessary for many important optical transitions for quantum technologies and various sensing mechanisms for biological and chemical detection. However, all well-known photonic platforms have excessively high losses in the UV, which has prevented photonic integrated circuits (PICs) being used to address these and other important application spaces. Photonic waveguides using low-loss alumina cores have emerged as a promising solution because of almunia's large optical bandgap and the high quality of films enabled by atomic layer deposition. However, to the best of our knowledge, active alumina PICs have only been realized using thermo-optic tuning, which precludes switching speeds shorter than one microsecond, high circuit densities, and cryogenically compatible operation. Here, we introduce a CMOS-fabricated, piezo-optomechanical PIC platform using alumina waveguides with low optical losses at UV wavelengths and aluminum nitride piezoelectric strain actuators, which solves the issues associated with thermal tuning. We demonstrate a high-performance, reconfigurable optical filter operating at wavelengths as low as 320 nm. The filter has a 6 nanosecond switching time, a loaded linewidth of 3.3 GHz, tuning rate of -120 MHz/V, and a hold power less than 20 nW.

AG-2024.06-2378

physics.optics

Nonlinear interferometry-based metrology of magneto-optical properties at infrared wavelengths

Tanmoy Chakraborty, Thomas Produit, Harish N S Krishnamoorthy, Cesare Soci, Anna V. Paterova

Magneto-optical properties of materials are utilized in numerous applications both in scientific research and industries. The novel properties of these materials can be further investigated by performing metrology in the infrared wavelength range, thereby enriching their potential applications. However, current infrared metrology techniques can be challenging and resource-intensive due to the unavailability of suitable components. To address these challenges, we propose and demonstrate a set of measurements based on nonlinear interferometry, which allows us investigating magneto-optical properties of materials at infrared wavelength range by performing optical detection at the visible range. For a proof-of-principle study, we measure the Verdet constant of a bismuth-iron-garnet, over a spectral bandwidth of 600 nm in the near-IR range.

AG-2024.06-2349

physics.optics

Stark Control of Plexcitonic States in Incoherent Quantum Systems

Hira Asif, Ramazan Sahin

Electro-optic control of quantum dots embedded in the plasmonic nanocavities enables active tuning of photonic devices for emerging applications in Quantum optics such as quantum information processing, entanglement and ultrafast optical switching. Here, we demonstrate the coherent control of plexcitonic states in (i) an off-resonant and (ii) a resonant coupled quantum systems through optical Stark effect (OSE). We analyze a hybrid plasmon-emitter system which exhibits tunable Fano resonance, Stark induced transparency (SIT) and vacuum Rabi splitting due to quadratic Stark shift in the degenerate states of quantum emitter (QE). In addition, a resonantly coupled system shows the signature of double Fano resonance due to Stark-induced splitting in a two-level QE. Our study shows that Stark tuning of plexcitons not only mitigates decoherence in the quantum system but it also stimulates on/off switching of spontaneous photon emission in the visible regime. Such tunable systems can be used to operate photonic integrated circuits (PIC) for applications in quantum computing and information processing.

AG-2024.06-2323

physics.optics

Wafer-Scale Fabrication of InGaP-on-Insulator for Nonlinear and Quantum Photonic Applications

Lillian Thiel, Joshua E. Castro, Trevor J. Steiner, Catherine L. Nguyen, Audrey Pechilis, Liao Duan, Nicholas Lewis, Garrett D. Cole, John E. Bowers, Galan Moody

The development of manufacturable and scalable integrated nonlinear photonic materials is driving key technologies in diverse areas such as high-speed communications, signal processing, sensing, and quantum information. Here, we demonstrate a novel nonlinear platform -- InGaP-on-insulator -- optimized for visible-to-telecommunication wavelength $χ^{\left(2\right)}$ nonlinear optical processes. In this work, we detail our 100-mm wafer-scale InGaP-on-insulator fabrication process realized via wafer bonding, optical lithography, and dry-etching techniques. The resulting wafers yield 1000s of components in each fabrication cycle, with initial designs that include chip-to-fiber couplers, 12.5-cm-long nested spiral waveguides, and arrays of microring resonators with free-spectral ranges spanning 400-900 GHz. We demonstrate intrinsic resonator quality factors as high as 324,000 (440,000) for single-resonance (split-resonance) modes near 1550 nm corresponding to 1.56 dB cm$^{-1}$ (1.22 dB cm$^{-1}$) propagation loss. We analyze the loss versus waveguide width and resonator radius to establish the operating regime for optimal 775-to-1550 nm phase matching. By combining the high $χ^{\left(2\right)}$ and $χ^{\left(3\right)}$ optical nonlinearity of InGaP with wafer-scale fabrication and low propagation loss, these results open promising possibilities for entangled-photon, multi-photon, and squeezed light generation.

AG-2024.06-2225

physics.optics

Integrated thermo-optic phase shifters for laser-written photonic circuits operating at cryogenic temperatures

Francesco Ceccarelli, Jelena V. Rakonjac, Samuele Grandi, Hugues de Riedmatten, Roberto Osellame, Giacomo Corrielli

Integrated photonics offers compact and stable manipulation of optical signals in miniaturized chips, with the possibility of changing dynamically their functionality by means of integrated phase shifters. Cryogenic operation of these devices is becoming essential for advancing photonic quantum technologies, accommodating components like quantum light sources, single photon detectors and quantum memories operating at liquid helium temperatures. In this work, we report on a programmable glass photonic integrated circuit (PIC) fabricated through femtosecond laser waveguide writing (FLW) and controlled by thermo-optic phase shifters both in a room-temperature and in a cryogenic setting. By taking advantage of a femtosecond laser microstructuring process, we achieved reliable PIC operation with minimal power consumption and confined temperature gradients in both conditions. This advancement marks the first cryogenically-compatible programmable FLW PIC, paving the way for fully integrated quantum architectures realized on a laser-written photonic chip.

AG-2024.06-2196

physics.optics

A Precision Gyroscope from the Helicity of Light

Michael A. Fedderke, Roni Harnik, David E. Kaplan, Sam Posen, Surjeet Rajendran, Francesco Serra, Vyacheslav P. Yakovlev

We describe a gyroscope that measures rotation based on the effects of the rotation on the polarization of light. Rotation induces a differential phase shift in the propagation of left- and right-circularly polarized light and this phase shift can be measured in suitably designed interferometric setups. The signal in this setup is independent of the frequency of light, unlike various sources of noise such as vibrations, which cause phase shifts that depend on the frequency. Such vibrations are the practical limit on the sensitivity of conventional Sagnac-style optical interferometers that are typically used as gyroscopes. In the proposed setup, one can potentially mitigate this source of noise by simultaneously using two (or more) sources of light that have different frequencies. The signal in this setup scales with the total storage time of the light. Due to its frequency independence, it is thus most optimal to measure the signal using superconducting radio-frequency systems where the high finesse of the available cavities enables considerably longer storage times than is possible in an optical setup.

AG-2024.06-2169

physics.optics

High-Efficiency Low-Noise Optomechanical Crystal Photon-Phonon Transducers

Sameer Sonar, Utku Hatipoglu, Srujan Meesala, David Lake, Hengjiang Ren, Oskar Painter

Optomechanical crystals (OMCs) enable coherent interactions between optical photons and microwave acoustic phonons, and represent a platform for implementing quantum transduction between microwave and optical signals. Optical absorption-induced thermal noise at cryogenic (millikelvin) temperatures is one of the primary limitations of performance for OMC-based quantum transducers. Here, we address this challenge with a two-dimensional silicon OMC resonator that is side-coupled to a mechanically detached optical waveguide, realizing a six-fold reduction in the heating rate of the acoustic resonator compared to prior state-of-the-art, while operating in a regime of high optomechanical-backaction and millikelvin base temperature. This reduced heating translates into a demonstrated phonon-to-photon conversion efficiency of 93.1 $\pm$ 0.8% at an added noise of 0.25 $\pm$ 0.01 quanta, representing a significant advance toward quantum-limited microwave-optical frequency conversion and optically-controlled quantum acoustic memories.

AG-2024.06-2154

physics.optics

Topological edge states in all-dielectric square-lattice arrays of bianisotropic microwave resonators

Alina D. Rozenblit, Georgiy D. Kurganov, Dmitry V. Zhirihin, Nikita A. Olekhno

We demonstrate that a bianisotropic response associated with a broken mirror symmetry of a dielectric resonator allows opening a band gap in simple square lattice arrays of such resonators. Realizing the proposed system as an array of high-index ceramic resonators working at GHz frequencies, we numerically and experimentally demonstrate the presence of topological edge states at the interface between two domains with opposite orientations of the bianisotropic resonators, as well as at the boundary between a single domain and free space. For both cases, we experimentally characterize the dispersion of edge states, and we examine their propagation along sharp bends, their resilience to various types of geometrical defects, and a spin-momentum-locked unidirectional propagation in the case of circularly polarized excitation. Also, we develop a theoretical model based on a Green's function approach that describes the square lattice of resonators and features quadratic degeneracies in the vicinity of $Γ$ and $M$ high-symmetry points that are removed upon the introduction of bianisotropy, and apply this model to evaluate Berry curvature. The considered design opens possibilities in the construction of optical and microwave structures simultaneously featuring topological edge states at the interfaces between distinct resonator domains or a resonator domain and free space.

AG-2024.06-2150

physics.optics

Near-field Strong Coupling and Entanglement of Quantum Emitters for Room-temperature Quantum Technologies

Daniel D. A. Clarke, Ortwin Hess

In recent years, quantum nanophotonics has forged a rich nexus of nanotechnology with photonic quantum information processing, offering remarkable prospects for advancing quantum technologies beyond their current technical limits in terms of physical compactness, energy efficiency, operation speed, temperature robustness and scalability. In this perspective, we highlight a number of recent studies that reveal the especially compelling potential of nanoplasmonic cavity quantum electrodynamics for driving quantum technologies down to nanoscale spatial and ultrafast temporal regimes, whilst elevating them to ambient temperatures. Our perspective encompasses innovative proposals for quantum plasmonic biosensing, driving ultrafast single-photon emission and achieving near-field multipartite entanglement in the strong coupling regime, with a notable emphasis on the use of industry-grade devices. We conclude with an outlook emphasizing how the bespoke characteristics and functionalities of plasmonic devices are shaping contemporary research directives in ultrafast and room-temperature quantum nanotechnologies.

AG-2024.06-2144

physics.optics

Manipulating Spectral Windings and Skin Modes through Nonconservative Couplings

Ningxin Kong, Chenghe Yu, Yilun Xu, Matteo Fadel, Xinyao Huang, Qiongyi He

The discovery of the non-Hermitian skin effect (NHSE) has revolutionized our understanding of wave propagation in non-Hermitian systems, highlighting unexpected localization effects beyond conventional theories. Here, we discover that NHSE, accompanied by multitype spectral phases, can be induced by manipulating nonconservative couplings. By characterizing the spectra through the windings of the energy bands, we demonstrate that band structures with identical, opposite, and even twisted windings can be achieved. These inequivalent types of spectra originate from the multichannel interference resulting from the interplay between conservative and nonconservative couplings. Associated with the multitype spectra, unipolar and bipolar NHSE with different eigenmode localizations can be observed. Additionally, our findings link the nonreciprocal transmission properties of the system to multiple spectral phases, indicating a connection with the skin modes. This paper paves new pathways for investigating non-Hermitian topological effects and manipulating nonreciprocal energy flow.

AG-2024.06-2112

physics.optics

An efficient singlet-triplet spin qubit to fiber interface assisted by a photonic crystal cavity

Kui Wu, Sebastian Kindel, Thomas Descamps, Tobias Hangleiter, Jan Christoph Müller, Rebecca Rodrigo, Florian Merget, Hendrik Bluhm, Jeremy Witzens

We introduce a novel optical interface between a singlet-triplet spin qubit and a photonic qubit which would offer new prospects for future quantum communication applications. The interface is based on a 220 nm thick GaAs/Al-GaAs heterostructure membrane and features a gate-defined singlet-triplet qubit, a gate-defined optically active quantum dot, a photonic crystal cavity and a bot-tom gold reflector. All essential components can be lithographically defined and deterministically fabricated, which greatly increases the scalability of on-chip in-tegration. According to our FDTD simulations, the interface provides an overall coupling efficiency of 28.7% into a free space Gaussian beam, assuming an SiO2 interlayer filling the space between the reflector and the membrane. The performance can be further increased to 48.5% by undercutting this SiO2 interlayer below the photonic crystal.

AG-2024.06-370

physics.optics

Demonstration of optical spring in an un-detuned cavity containing an optical parametric amplifier

Jian Liu, Juntao Pan, Carl Blair, Jue Zhang, Hengxin Sun, Li Ju, Chunnong Zhao

Here we demonstrate the capacity to manipulate the optical spring (OS) effect by employing an optical parametric amplifier (OPA) within an optical cavity. We observed more than a factor of 2 increase in the OS frequency shift with the OPA. We also showed for the first time that the OS can be tuned by solely adjusting the OPA phase and showing an un-detuned cavity exhibiting an optical spring. The method can be applied to gravitational wave detectors in the signal recycling configuration to realize narrow bandwidth high sensitivity. The OS can be tuned to align the detector peak sensitivity frequency to known frequency continuous gravitational wave signals, dynamically tuned to track the gravitational wave signal from merging compact binaries or tuned to search for the post-merger signal of known binary coalescence.

AG-2024.06-2089

physics.optics

Multifrequency-resolved Hanbury Brown-Twiss Effect

Joseph Ferrantini, Jesse Crawford, Sergei Kulkov, Jakub Jirsa, Aaron Mueninghoff, Lucas Lawrence, Stephen Vintskevich, Tommaso Milanese, Samuel Burri, Ermanno Bernasconi, Claudio Bruschini, Michal Marcisovsky, Peter Svihra, Andrei Nomerotski, Paul Stankus, Edoardo Charbon, Raphael A. Abrahao

The Hanbury Brown-Twiss (HBT) effect holds a pivotal place in intensity interferometry and gave a seminal contribution to the development of quantum optics. To observe such an effect, both good spectral and timing resolutions are necessary. Most often, the HBT effect is observed for a single frequency at a time, due to limitations in dealing with multifrequencies simultaneously, halting and limiting some applications. Here, we report a fast and data-driven spectrometer built with a one-dimensional array of single-photon-sensitive avalanche diodes. We report observing the HBT effect for multifrequencies at the same time. Specifically, we observed the HBT for up to 5 lines of the Ne spectrum, but this can be improved even further. Our work represents a major step to make spectral binning and multifrequencies HBT more widely available. The technology we present can benefit both classical and quantum applications.

AG-2024.06-2067

physics.optics

Optimal Diffractive Focusing of Quantum Waves

Maxim A. Efremov, Felix Hufnagel, Hugo Larocque, Wolfgang P. Schleich, Ebrahim Karimi

Following the familiar analogy between the optical paraxial wave equation and the Schrödinger equation, we derive the optimal, real-valued wave function for focusing in one and two space dimensions without the use of any phase component. We compare and contrast the focusing parameters of the optimal waves with those of other diffractive focusing approaches, such as Fresnel zones. Moreover, we experimentally demonstrate these focusing properties on optical beams using both reflective and transmissive liquid crystal devices. Our results provide an alternative direction for focusing waves where phase elements are challenging to implement, such as for X-rays, THz radiation, and electron beams.

AG-2024.06-2017

physics.optics

Multimer states in multilevel waveguide QED

Jiaming Shi, Alexander N. Poddubny

We study theoretically the interplay of spontaneous emission and interactions for the multiple-excited quasistationary eigenstates in a finite periodic array of multilevel atoms coupled to the waveguide. We develop an analytical approach to calculate such eigenstates based on the subradiant dimer basis. Our calculations reveal the peculiar multimerization effect driven by the anharmonicity of the atomic potential: while a general eigenstate is an entangled one, there exist eigenstates that are products of dimers, trimers, or tetramers, depending on the size of the system and the fill factor. At half-filling, these product states acquire a periodic structure with all-to-all connections inside each multimer and become the most subradiant ones.

AG-2024.06-1940

physics.optics

Selection rules of linear and nonlinear polarization-selective absorption in optically dressed matter

Michael Feldman, Matan Even Tzur, Oren Cohen

Dynamical symmetries of laser-dressed matter determine selection rules that determine its absorption spectrum. We explore selection rules for polarization-sensitive absorption in Floquet matter, using Floquet group theory in synthetic dimensions. We present comprehensive tables of selection rules that polarization-structured light impose on Floquet dark states and Floquet dark bands. Notably, our tables encompass nonlinear absorption, to all nonlinear orders, revealing that different nonlinear orders follow distinct polarization selection rules, potentially leading to polarization-tunable optical filters.

AG-2024.06-1934

physics.optics

Large-scale cluster quantum microcombs

Ze Wang, Kangkang Li, Yue Wang, Xin Zhou, Yinke Cheng, Boxuan Jing, Fengxiao Sun, Jincheng Li, Zhilin Li, Bingyan Wu, Qihuang Gong, Qiongyi He, Bei-Bei Li, Qi-Fan Yang

An optical frequency comb comprises a cluster of equally spaced, phase-locked spectral lines. Replacing these classical components with correlated quantum light gives rise to cluster quantum frequency combs, providing abundant quantum resources for measurement-based quantum computation and multi-user quantum networks. We propose and generate cluster quantum microcombs within an on-chip optical microresonator driven by multi-frequency lasers. Through resonantly enhanced four-wave mixing processes, continuous-variable cluster states with 60 qumodes are deterministically created. The graph structures can be programmed into one- and two-dimensional lattices by adjusting the configurations of the pump lines, which are confirmed inseparable based on the measured covariance matrices. Our work demonstrates the largest-scale cluster states with unprecedented raw squeezing levels from a photonic chip, offering a compact and scalable platform for computational and communicational tasks with quantum advantages.

AG-2024.06-1913

physics.optics

3D correlation imaging for localized phase disturbance mitigation

Francesco V. Pepe, Milena D'Angelo

Correlation plenoptic imaging is a procedure to perform light-field imaging without spatial resolution loss, by measuring second-order spatio-temporal correlations of light. We investigate the possibility to use correlation plenoptic imaging to mitigate the effect of a phase disturbance in the propagation from the object to the main lens. We assume that this detrimental effect, that can be due to a turbulent medium, is localized at a specific distance from the lens, and is slowly varying in time. The mitigation of turbulence effects has already fostered the development of both light-field imaging and correlation imaging procedures. Here, we aim at merging these aspects, proposing a correlation light-field imaging method to overcome the effects of slowly varying turbulence, without the loss of lateral resolution, typical of traditional plenoptic imaging devices.

AG-2024.06-1832

physics.optics

Laser-target symmetry-breaking in high harmonic generation: from frequency shift to odd-even intensity modulation

Doan-An Trieu, Van-Hoang Le, Ngoc-Loan Phan

Although the frequency shift and odd-even intensity modulation in high-order harmonic generation (HHG) have both been observed for asymmetric laser-target systems, they are typically studied as two separate phenomena. In this Letter, we provide a comprehensive picture of these two nonlinear optical phenomena, unifying them through a common origin - asymmetry of the laser-target system. By tuning asymmetric laser-target systems, we discover a transition from the harmonic frequency shift to the odd-even intensity modulation upon increasing the duration of the driving laser pulse. Specifically, these phenomena are observed simultaneously for laser pulses with intermediate pulse duration. For numerical evidence, we solve the time-dependent Schrödinger equation, while insight into the underlying physics is obtained from a simplified analytically tractable model. Understanding the asymmetric characteristics reflected in the HHG as provided is crucial for retrieving laser-target information, sampling external fields, and probing molecular dynamics.

AG-2024.06-1828

physics.optics

Large-scale free-space photonic circuits in two dimensions

Maria Gorizia Ammendola, Francesco Di Colandrea, Lorenzo Marrucci, Filippo Cardano

Photonic circuits, engineered to couple optical modes according to a specific map, serve as processors for classical and quantum light. The number of components typically scales with that of processed modes, thus correlating system size, circuit complexity, and optical losses. Here we present a photonic-circuit technology implementing large-scale unitary maps in free space, coupling a single input to hundreds of output modes in a two-dimensional compact layout. The map corresponds to a quantum walk of structured photons, realized through light propagation in three liquid-crystal metasurfaces, having their optic axes artificially patterned. Theoretically, the walk length and the number of connected modes can be arbitrary, while keeping losses constant. The patterns can be designed to replicate multiple unitary maps. We also discuss limited reconfigurability by adjusting the overall birefringence and the relative displacement of the optical elements. These results lay the basis for the design of low-loss non-integrated photonic circuits, primarily for manipulating multi-photon states in quantum regimes.

AG-2024.06-1804

physics.optics

Designing metasurface optical interfaces for solid-state qubits using many-body adjoint shape optimization

Amelia R. Klein, Nader Engheta, Lee C. Bassett

We present a general strategy for the inverse design of metasurfaces composed of elementary shapes. We use it to design a structure that collects and collimates light from nitrogen-vacancy centers in diamond. Such metasurfaces constitute scalable optical interfaces for solid-state qubits, enabling efficient photon coupling into optical fibers and eliminating free-space collection optics. The many-body shape optimization strategy is a practical alternative to topology optimization that explicitly enforces material and fabrication constraints throughout the optimization, while still achieving high performance. The metasurface is easily adaptable to other solid-state qubits, and the optimization method is broadly applicable to fabrication-constrained photonic design problems.

AG-2024.06-724

physics.optics

Classical electrodynamics as a tool to examine optical effects of chiral dielectrics and media with magnetic conductivity

Pedro D. S. Silva, Manoel M. Ferreira

We discuss how classical electromagnetic techniques are useful to describe optical effects in conventional and chiral dielectric systems endowed with optical activity. Starting from the Maxwell equations and constitutive relations of the medium, we obtain the wave equation (for the electric field) that yields the refractive indices and the corresponding propagating modes that define the electromagnetic wave polarization. This procedure is employed for bi-isotropic and bi-anisotropic dielectrics, allowing us to determine birefringence, a manifestation of the space or time inversion breaking, typical of the chiral media. Such a method can also be applied for axion electrodynamics and a dielectric supporting an isotropic chiral magnetic current, similar to the Chiral Magnetic Effect (CME). For a diagonal magnetic conductivity, two distinct refractive indices are found, associated with left circularly polarized (LCP) and right circularly polarized (RCP) waves, and yielding circular birefringence (evaluated in terms of the optical rotatory power). Additionally, the scenario of a bi-isotropic medium endowed with isotropic magnetic current is examined, where a rotatory power marked by sign reversal may work as an optical signature of this particular system.

AG-2024.06-1726

physics.optics

Higher-order Poincaré Spheres and Spatio-Spectral Poincaré Beams

Robert Fickler, Lea Kopf, Marco Ornigotti

The study of fundamental optics effects has been stimulated through the increasing ability to structure light in all its degrees of freedom (DOFs) in sophisticated but simple experimental settings. However, with such an increase in experimental capabilities, it has also become important to study theoretical descriptions for a more intuitive understanding of the underlying concepts. Here, we introduce a visual representation of light that is structured in its transverse space, frequency, and polarization in the form of a higher-order Poincaré sphere and discuss interesting links to its fundamental counterpart. We further leverage this connection to discuss and experimentally generate light possessing all possible polarization states across its spatio-spectral shape, which we term spatio-spectral Poincaré beams. By invoking all DOFs of light in the powerful description of higher-order Poincaré spheres, our work can pave the way for a deeper understanding and beneficial application of structured light as a powerful tool in optics.

AG-2024.06-1676

physics.optics

A Variational Approach to Learning Photonic Unitary Operators

Hadrian Bezuidenhout, Mwezi Koni, Jonathan Leach, Paola Concha Obando, Andrew Forbes, Isaac Nape

Structured light, light tailored in its internal degrees of freedom, has become topical in numerous quantum and classical information processing protocols. In this work, we harness the high dimensional nature of structured light modulated in the transverse spatial degree of freedom to realise an adaptable scheme for learning unitary operations. Our approach borrows from concepts in variational quantum computing, where a search or optimisation problem is mapped onto the task of finding a minimum ground state energy for a given energy/goal function. We achieve this by a pseudo-random walk procedure over the parameter space of the unitary operation, implemented with optical matrix-vector multiplication enacted on arrays of Gaussian modes by exploiting the partial Fourier transforming capabilities of a cylindrical lens in the transverse degree of freedom for the measurement. We outline the concept theoretically, and experimentally demonstrate that we are able to learn optical unitary matrices for dimensions d = 2, 4, 8 and 16 with average fidelities of >90%. Our work advances high dimensional information processing and can be adapted to both process and quantum state tomography of unknown states and channels.

AG-2024.06-1610

physics.optics

Quantum Diamond Microscope for Narrowband Magnetic Imaging with High Spatial and Spectral Resolution

Zechuan Yin, Jiashen Tang, Connor A. Hart, John W. Blanchard, Xinyan Xiang, Saipriya Satyajit, Smriti Bhalerao, Tao Tao, Stephen J. DeVience, Ronald L. Walsworth

The quantum diamond microscope (QDM) is a recently developed technology for near-field imaging of magnetic fields with micron-scale spatial resolution. In the present work, we integrate a QDM with a narrowband measurement protocol and a lock-in camera; and demonstrate imaging of radiofrequency (RF) magnetic field patterns produced by microcoils, with spectral resolution $\approx1$\,Hz. This RF-QDM provides multi-frequency imaging with a central detection frequency that is easily tunable over the MHz-scale, allowing spatial discrimination of both crowded spectral peaks and spectrally well-separated signals. The present instrument has spatial resolution $\approx2\,\mathrm{μm}$, field-of-view $\approx300\times300\,\mathrm{μm^2}$, and per-pixel sensitivity to narrowband fields $\sim{1}\,$nT$\cdot$Hz$^{-1/2}$. Spatial noise can be reduced to the picotesla scale by signal averaging and/or spatial binning. The RF-QDM enables simultaneous imaging of the amplitude, frequency, and phase of narrowband magnetic field patterns at the micron-scale, with potential applications in real-space NMR imaging, AC susceptibility mapping, impedance tomography, analysis of electronic circuits, and spatial eddy-current-based inspection.

AG-2024.06-1590

physics.optics

Topological Materials for Near-Field Radiative Heat Transfer

Azadeh Didari-Bader, Seonyeong Kim, Heejin Choi, Sunae Seo, Piyali Biswas, Heejeong Jeong, Chang-Won Lee

Topological materials provide a platform that utilizes the geometric characteristics of structured materials to control the flow of waves, enabling unidirectional and protected transmission that is immune to defects or impurities. The topologically designed photonic materials can carry quantum states and electromagnetic energy, benefiting nanolasers or quantum photonic systems. This article reviews recent advances in the topological applications of photonic materials for radiative heat transfer, especially in the near field. When the separation distance between media is considerably smaller than the thermal wavelength, the heat transfer exhibits super-Planckian behavior that surpasses Planck's blackbody predictions. Near-field thermal radiation in subwavelength systems supporting surface modes has various applications, including nanoscale thermal management and energy conversion. Photonic materials and structures that support topological surface states show immense potential for enhancing or suppressing near-field thermal radiation. We present various topological effects, such as periodic and quasi-periodic nanoparticle arrays, Dirac and Weyl semimetal-based materials, structures with broken global symmetries, and other topological insulators, on near-field heat transfer. Also, the possibility of realizing near-field thermal radiation in such topological materials for alternative thermal management and heat flux guiding in nano-scale systems is discussed based on the existing technology.

AG-2024.06-1579

physics.optics

Modulated Ringdown Comb Interferometry for next-generation high complexity trace gas sensing

Qizhong Liang, Apoorva Bisht, Andrew Scheck, Peter G. Schunemann, Jun Ye

Gas samples relevant to health and environment typically contain a plethora of molecular species that span a huge concentration dynamic range. High-concentration molecules impose a strong absorption background that hinders robust identification of low-concentration species. While mid-infrared frequency comb spectroscopy with high-finesse cavity enhancement has realized many of the most sensitive multi-species trace gas detection to date, its robust performance requires gas samples to contain only weak absorption features to avoid dispersing cavity resonances from the comb line frequencies. Here we introduce a new technique that is free from this restriction, thus enabling the development of next-generation multi-species trace gas sensing with broad applicability to complex and dynamic molecular compositions. The principle of Modulated Ringdown Comb Interferometry is to resolve ringdown dynamics carried by massively parallel comb lines transmitted through a length-modulated cavity. This method leverages both periodicity of the field dynamics and Doppler frequency shifts introduced from a Michelson interferometer. Scalable enhancement of both spectral coverage and cavity finesse is enabled with dispersion immune and high-efficiency data collection. Built upon this platform, we realize in the mid-infrared a product of finesse and spectral coverage that is orders of magnitude better than all prior experiments. We demonstrate the power of this technique by measuring highly dispersive exhaled human breath samples over a vastly expanded spectral coverage of 1,010 cm-1 and with cavity finesse of 23,000. This allows for the first time simultaneous quantification of 20 distinct molecular species at > 1 part-per-trillion sensitivity with their concentrations varying by 7 orders of magnitude.

AG-2024.06-1527

physics.optics

InGaP $χ^{(2)}$ integrated photonics platform for broadband, ultra-efficient nonlinear conversion and entangled photon generation

Joshua Akin, Yunlei Zhao, Yuvraj Misra, A. K. M. Naziul Haque, Kejie Fang

Nonlinear optics plays an important role in many areas of science and technology. The advance of nonlinear optics is empowered by the discovery and utilization of materials with growing optical nonlinearity. Here we demonstrate an indium gallium phosphide (InGaP) integrated photonics platform for broadband, ultra-efficient second-order nonlinear optics. The InGaP nanophotonic waveguide enables second-harmonic generation with a normalized efficiency of $128,000\%$/W/cm$^2$ at 1.55 $μ$m pump wavelength, nearly two orders of magnitude higher than the state of the art in the telecommunication C band. Further, we realize an ultra-bright, broadband time-energy entangled photon source with a pair generation rate of 97 GHz/mW and a bandwidth of 115 nm centered at the telecommunication C band. The InGaP entangled photon source shows high coincidence-to-accidental counts ratio CAR $>10^4$ and two-photon interference visibility $>98\%$. The InGaP second-order nonlinear photonics platform will have wide-ranging implications for non-classical light generation, optical signal processing, and quantum networking.

AG-2024.06-1480

physics.optics

Linear and nonlinear propagation of cylindrical vector beam through a non-degenerate four level atomic system

Partha Das, Tarak Nath Dey

We investigate the phase-induced susceptibilities for both components of the probe vector beam (PVB) within an atomic system. The atoms are prepared in a non-degenerate four-level configuration. The transitions are coupled by a $π$ polarized control field and two orthogonally polarized components of a PVB. We show that the linear susceptibility of the medium depends on the phase shift between the control field and PVB, characterizing loss or gain in the system. Additionally, the phase shift causes polarization rotation in the vector beams (VBs) as they propagate. We further study the effect of nonlinearity on the VB propagation through the medium for a couple of Rayleigh lengths. The self-focusing and defocusing phenomena are observed for radial, azimuthal, and spiral VBs. The special chain-like self-focusing and defocusing leads to the formation of consecutive smaller spot sizes with moderate gain. Therefore, the mechanism of control of susceptibility and self-focusing may hold promise for applications such as transitioning from an absorber to an amplifier, high-resolution microscopy, and optical trap systems.