Soft Condensed Matter

AG-2026.04-2071

cond-mat.soft

Propulsion and far-field hydrodynamics of linked-sphere microswimmers with viscoelastic deformability

Vimal Singh, Akash Choudhary

Viscoelasticity governs the locomotion strategies of deformable microorganisms, rendering it a fundamental mechanical property of microbial motility and an integral component in the design of envisioned microbots. Recent studies have shown that it can enable effective propulsion through non-reciprocal body deformations, even under time-reversible actuation. In this work, we investigate the dynamics of model microswimmers driven by reciprocal actuation, wherein the passive body exhibits viscoelastic deformability. We consider two linked-sphere designs, distinguished by the location of actuation: applied at one end (3-sphere design) or at the midpoint of the swimmer body (4-sphere design). Adopting Kelvin-Voigt deformability, we characterize the kinematic performance of both designs: the three-sphere swimmer possesses an optimal actuation frequency, while the four-sphere swimmer exhibits a critical frequency at which the locomotion direction reverses. We examine the swimmer's far-field hydrodynamic signature and find that resulting flow field is characterized by dominant dipolar and quadrupolar contributions, whose magnitudes are sensitive to the relative length of the actuator segment.

AG-2026.04-2081

cond-mat.soft

Linear poroelastic response of thin permeable gel films

Caroline Kopecz-Muller, Joshua D Mcgraw, Thomas Salez

When a hydrophilic and deformable porous material is immersed in a bath, it may absorb the solvent and expand by several times its volume, thus forming a highly soft and porous hydrogel. A stress applied on the soft hydrogel surface deforms it and forces the absorbed solvent to move by flowing through the network of pores. This coupled phenomenon sets the framework of poroelasticity. Moreover, polymeric gels are often used in ultra-thin coatings to tune surface properties. Together with the characteristic poroelastic coupling, this thinness challenges the modelling of their response. In this article, we derive the point-force mechanical response of a thin, permeable and poroelastic layer bounded to a rigid substrate. We show that the gel surface is only deformed around the indentation point, within a radius on the order of the layer thickness. The obtained Green's function can be directly used to predict the space- and time-dependent surface deformation of the gel. Our findings are relevant for a broad range of applications, such as indentation experiments on swollen gels, thin membranes or soft and living systems, as well as lubrication problems involving a soft and porous wall, for instance in microfluidics.

AG-2025.10-923

cond-mat.soft

Functional renormalization group for classical liquids without recourse to hard-core reference systems: A study of three-dimensional Lennard-Jones liquids

Takeru Yokota, Jun Haruyama, Osamu Sugino

In our previous work [Phys. Rev. E 104, 014124 (2021)], we developed a method for analyzing classical liquids using the functional renormalization group (FRG) without relying on a hard-core reference system. In this paper, we extend this method to three-dimensional liquids. We describe an efficient approach for performing the spatial integrals that appear in the renormalization group equations, which is essential for realizing numerical calculations in three dimensions. As a demonstration, we present its application to the Lennard-Jones liquids. Through calculations of thermodynamic quantities, we find that FRG preserves thermodynamic consistency (TC) better than traditional integral-equation methods such as the hypernetted-chain, Percus-Yevick, and Kovalenko-Hirata closures. Taking the molecular dynamics results as a benchmark, we also show that FRG can achieve an accuracy comparable to that of integral-equation methods that incorporate TC, such as the Rogers-Young closure. We further assess the accuracy of the pair distribution function and examine whether our method remains applicable below the critical temperature. Our results demonstrate that FRG provides a new method for describing classical liquids with accuracy comparable to modern liquid theories.

AG-2025.06-1074

cond-mat.soft

On the temperature of an active nematic

Jay Armas, Akash Jain, Ruben Lier

We employ a novel hydrodynamic framework for active matter coupled to an environment to study the local temperature of an active nematic, assuming proximity to thermal equilibrium. We show that, due to the mechanosensitivity of fuel consumption, linearized temperature correlations in a homogeneous active nematic steady state remain unaffected by activity. However, we demonstrate that local shearing and twisting cause a confined active nematic undergoing a spontaneous flow transition to develop a distinctive inhomogeneous temperature profile, serving as a thermal signature of activity.

AG-2024.11-650

cond-mat.soft

Gauge theory for topological waves in continuum fluids with odd viscosity

Keisuke Fujii, Yuto Ashida

We consider two-dimensional continuum fluids with odd viscosity under a chiral body force. The chiral body force makes the low-energy excitation spectrum of the fluids gapped, and the odd viscosity allows us to introduce the first Chern number of each energy band in the fluids. Employing a mapping between hydrodynamic variables and U(1) gauge-field strengths, we derive a U(1) gauge theory for topologically nontrivial waves. The resulting U(1) gauge theory is given by the Maxwell-Chern-Simons theory with an additional term associated with odd viscosity. We then solve the equations of motion for the gauge fields concretely in the presence of the boundary and find edge-mode solutions. We finally discuss the fate of bulk-boundary correspondence (BBC) in the context of continuum systems.

AG-2024.05-2366

cond-mat.soft

Giant splitting of the hydrogen rotational eigenenergies in the C$_2$ filled ice

Simone Di Cataldo, Maria Rescigno, Lorenzo Monacelli, Umbertoluca Ranieri, Richard Gaal, Stefan Klotz, Jacques Ollivier, Michael Marek Koza, Cristiano De Michele, Livia Eleonora Bove

Hydrogen hydrates present a rich phase diagram influenced by both pressure and temperature, with the so-called C$_2$ phase emerging prominently above 2.5 GPa. In this phase, hydrogen molecules are densely packed within a cubic ice-like lattice and the interaction with the surrounding water molecules profoundly affects their quantum rotational dynamics. Herein, we delve into this intricate interplay by directly solving the Schrödinger's equation for a quantum H$_2$ rotor in the C$_2$ crystal field at finite temperature, generated through Density Functional Theory. Our calculations reveal a giant energy splitting relative to the magnetic quantum number of $\pm$3.2 meV for $l=1$. Employing inelastic neutron scattering, we experimentally measure the energy levels of H$_2$ within the C$_2$ phase at 6.0 and 3.4 GPa and low temperatures, finding remarkable agreement with our theoretical predictions. These findings underscore the pivotal role of hydrogen--water interactions in dictating the rotational behavior of the hydrogen molecules within the C$_2$ phase and indicate heightened induced-dipole interactions compared to other hydrogen hydrates.

AG-2024.05-866

cond-mat.soft

Hydrodynamics of thermal active matter

Jay Armas, Akash Jain, Ruben Lier

Active matter concerns many-body systems comprised of living or self-driven agents that collectively exhibit macroscopic phenomena distinct from conventional passive matter. Using Schwinger-Keldysh effective field theory, we develop a novel hydrodynamic framework for thermal active matter that accounts for energy balance, local temperature variations, and the ensuing stochastic effects. By modelling active matter as a driven open system, we show that the source of active contributions to hydrodynamics, violations of fluctuation-dissipation theorems, and detailed balance is rooted in the breaking of time-translation symmetry due to the presence of fuel consumption and an external environmental bath. In addition, our framework allows for non-equilibrium steady states that produce entropy, with a well-defined notion of steady-state temperature. We use our framework of active hydrodynamics to develop effective field theory actions for active superfluids and active nematics that offer a first-principle derivation of various active transport coefficients and feature activity-induced phase transitions. We also show how to incorporate temperature, energy and noise in fluctuating hydrodynamics for active matter. Our work suggests a broader perspective on active matter that can leave an imprint across scales.

AG-2024.04-690

cond-mat.soft

Physics of a granular pile

R. Krechetnikov, A. Zelnikov

From the onset of the subject, granular media have been defying the toolkit of statistical mechanics thus preventing from understanding their thermodynamical and rheological properties and making them one of the key remaining mysteries in science. In the present work, we offer a resolution to this problem in the case of static granular media by considering a collective behavior of 2D identical balls forming a granular pile in the gravity field, which allows us to develop its thermodynamics and rheology from the first principles. Besides the uncertainty due to rough substrate on which the pile is built, we uncover another one due to ambiguities occurring in the positions of some interior balls. Both are responsible for the thermodynamic description of the granular pile, which proves to be anything but ordinary. In particular, we show that a pile is characterized by three temperatures: one is infinite, the other is negative, and the third is of higher-order. Also, considering the fields of ball displacements $\boldsymbolξ$ and the normal force deviations $δ\boldsymbol{N}$ from the ideal isosceles triangular structure of a regular pile reveals the hyperbolic nature of the $\boldsymbolξ$-field and ability of the $δ\boldsymbol{N}$-field to change the characteristic type from hyperbolic to elliptic. The latter property not only explains the origin of force chains and provides an adequate description of the rheology of static granular media, but turned out to be instrumental for understanding of granular media thermodynamics. Our model should provide a basis for further grasping of granular media properties, in general.

AG-2024.02-2271

cond-mat.soft

Coalescence of sessile aqueous droplets laden with surfactant

S. Arbabi, P. Deuar, R. Bennacer, Z. Che, P. E. Theodorakis

With most of the focus to date having been on the coalescence of freely suspended droplets, much less is known about the coalescence of sessile droplets, especially in the case of droplets laden with surfactant. Here, we employ large-scale molecular dynamics simulations to investigate this phenomenon on substrates with different wettability. In particular, we unravel the mass transport mechanism of surfactant during coalescence, thus explaining the key mechanisms present in the process. Close similarities are found between the coalescence of sessile droplets with equilibrium contact angles above 90° and that of freely suspended droplets, being practically the same when the contact angle of the sessile droplets is above 140°. Here, the initial contact point is an area that creates an initial contact film of surfactant that proceeds to break into engulfed aggregates. A major change in the physics appears below the 90° contact angle, when the initial contact point becomes small and line-like, strongly affecting many aspects of the process and allowing water to take part in the coalescence from the beginning. We find growth exponents consistent with a 2/3 power law on strongly wettable substrates but no evidence of linear growth. Overall bridge growth speed increases with wettability for all surfactant concentrations, but the speeding up effect becomes weaker as surfactant concentration grows, along with a general slowdown of the coalescence compared to pure water. Concurrently, the duration of the initial thermally limited regime increases strongly by almost an order of magnitude for strongly wettable substrates.

AG-2024.02-2289

cond-mat.soft

Chemically reactive thin films: dynamics and stability

Tilman Richter, Paolo Malgaretti, Thomas M. Koller, Jens Harting

Catalyst particles or complexes suspended in liquid films can trigger chemical reactions leading to inhomogeneous concentrations of reactants and products in the film. We demonstrate that the sensitivity of the liquid film's gas-liquid surface tension to these inhomogeneous concentrations strongly impacts the film stability. Using linear stability analysis, we identify novel scenarios in which the film can be either stabilized or destabilized by the reactions. Furthermore, we find so far unrevealed rupture mechanisms which are absent in the chemically inactive case. The linear stability predictions are confirmed by numerical simulations, which also demonstrate that the shape of chemically active droplets can depart from the spherical cap and that unsteady states such as traveling and standing waves might appear. Finally, we critically discuss the relevance of our predictions by showing that the range of our selected parameters is well accessible by typical experiments.

AG-2024.02-2290

cond-mat.soft

Tunable transport in bi-disperse porous materials with vascular structure

Olivier Vincent, Théo Tassin, Erik J. Huber, Abraham D. Stroock

We study transport in synthetic, bi-disperse porous structures, with arrays of microchannels interconnected by a nanoporous layer. These structures are inspired by the xylem tissue in vascular plants, in which sap water travels from the roots to the leaves to maintain hydration and carry micronutrients. We experimentally evaluate transport in three conditions: high pressure-driven flow, spontaneous imbibition, and transpiration-driven flow. The latter case resembles the situation in a living plant, where bulk liquid water is transported upwards in a metastable state (negative pressure), driven by evaporation in the leaves; here we report stable, transpiration-driven flows down to $\sim -15$ MPa of driving force. By varying the shape of the microchannels, we show that we can tune the rate of these transport processes in a predictable manner, using a simple analytical (effective medium) approach and numerical simulations of the flow field in the bi-disperse media. We also show that the spontaneous imbibition behavior of a single structure - with fixed geometry - can behave very differently depending on its preparation (filled with air, vs. evacuated), because of a dramatic change in the conductance of vapor in the microchannels; this change offers a second way to tune the rate of transport in bi-disperse, xylem-like structures, by switching between air-filled and evacuated states.

AG-2024.01-2249

cond-mat.soft

Effect of the Nature of the Solid Substrate on Spatially Heterogeneous Activated Dynamics in Glass Forming Supported Films

Anh D. Phan, Kenneth S. Schweizer

We extend the force-level ECNLE theory to treat the spatial gradients of the alpha relaxation time and glass transition temperature, and the corresponding film-averaged quantities, to the geometrically asymmetric case of finite thickness supported films with variable fluid - substrate coupling. The latter typically nonuniversally slows down motion near the solid-liquid interface as modeled via modification of the surface dynamic free energy caging constraints which are spatially transferred into the film, and which compete with the accelerated relaxation gradient induced by the vapor interface. Quantitative applications to the foundational hard sphere fluid and a polymer melt are presented. The strength of the effective fluid-substrate coupling has very large consequences on the dynamical gradients and film-averaged quantities in a film thickness and thermodynamic state dependent manner. The interference of the dynamical gradients of opposite nature emanating from the vapor and solid interfaces is determined, including the conditions for the disappearance of a bulk-like region in the film center. The relative importance of surface-induced modification of local caging versus the generic truncation of the long range collective elastic component of the activation barrier is studied. The conditions for the accuracy and failure of a simple superposition approximation for dynamical gradients in thin films is also determined. The emergence of near substrate dead layers, large gradient effects on film-averaged response functions, and a weak non-monotonic evolution of dynamic gradients in thick and cold films, are briefly discussed. The connection of our theoretical results to simulations and experiments is briefly discussed, as is extension to treat more complex glass-forming systems under nanoconfinement.

AG-2024.01-2252

cond-mat.soft

Printing Mosaics of Magnetically Programmed Liquid Crystal Directors for Reversibly Morphing Soft Matter

Yueping Wang, Jongwon An, Hongseok Kim, Sehui Jeong, Hyunggyu Kim, Jaesung Park, Seunggyu Ko, Jinho Son, Howon Lee

Liquid crystal elastomer (LCE) has been intensively utilized in 4D printing techniques to fabricate smart structures with reversible actuation on the basis of appropriate alignment of liquid crystal (LC) molecules. As a non-contact alignment strategy with a controllability of orientation, magnetic-field alignment has been rarely adapted in 4D printing of LCE because of its poor printing efficiency and demand on large field strength. Here, we report a digital light projection (DLP) system integrated with reorientable magnetic field to facilely print smart LCE structures. We propose a new LCE precursor solution that maintains a liquid crystalline nematic phase and an adequate flowability at room temperature. The resin prior to photopolymerization can be sufficiently aligned by a magnetic field with a strength of 500 mT in seconds without temperature elevating or cycling. Consequential printed structures are capable of presenting an impressive reversible thermal actuation of more than 30 %. The local and arbitrary magnetic-field alignment in layers during DLP printing is characterized, which renders us the ability to construct smart structures with more delicate LC alignments. Furthermore, we introduce the selective deformation of LCE structures with programmed molecular orientation using the photo-thermal effect. Our reported approach reveals the significant potential for fabricating morphing structures in various fields, including soft robotics, biomedical structures, and microelectronics. (†These authors contributed equally.)

AG-2024.01-2137

cond-mat.soft

Effect of the electrical double layer on the electrical conductivity of suspensions

M. Ya. Sushko, S. D. Balika

We study the role of the electrical double layer (EDL) in the formation of the quasistatic electrical conductivity of suspensions of nanosized particles. A suspension is viewed as a system of hard-core--penetrable-shell particles. The shells are electrically inhomogeneous, with a radially symmetrical conductivity profile. It is assumed that the real microstructure of the suspension can be reflected in terms of this profile and also the rule of dominance for overlapping regions that the local conductivity in the system is determined by the nearest particle. Using our earlier rigorous results for systems with this morphology, we derive general integral relations for the desired conductivity which incorporate the effect of the EDL and make it possible to look into the contributions from its different parts and parameters. Specific features, internal consistency, and flexibility of the model are demonstrated by further elaborating it to describe experimental data for latex suspensions in aqueous electrolyte solutions with high ionic strength.

AG-2024.01-2217

cond-mat.soft

Crowding-Regulated Binding of Divalent Biomolecules

Tomasz Skóra, Mathijs Janssen, Andreas Carlson, Svyatoslav Kondrat

Macromolecular crowding affects biophysical processes as diverse as diffusion, gene expression, cell growth, and senescence. Yet, there is no comprehensive understanding of how crowding affects reactions, particularly multivalent binding. Herein, we use scaled particle theory and develop a molecular simulation method to investigate the binding of monovalent to divalent biomolecules. We find that crowding can increase or reduce cooperativity--the extent to which the binding of a second molecule is enhanced after binding a first molecule--by orders of magnitude, depending on the sizes of the involved molecular complexes. Cooperativity generally increases when a divalent molecule swells and then shrinks upon binding two ligands. Our calculations also reveal that, in some cases, crowding enables binding that does not occur otherwise. As an immunological example, we consider Immunoglobulin G-antigen binding and show that crowding enhances its cooperativity in bulk but reduces it when an Immunoglobulin G binds antigens on a surface.

AG-2023.09-002

cond-mat.soft

Geometric frustration of hard-disk packings on cones

Jessica H. Sun, Abigail Plummer, Grace H. Zhang, David R. Nelson, Vinothan N. Manoharan

Conical surfaces pose an interesting challenge to crystal growth: a crystal growing on a cone can wrap around and meet itself at different radii. We use a disk-packing algorithm to investigate how this closure constraint can geometrically frustrate the growth of single crystals on cones with small opening angles. By varying the crystal seed orientation and cone angle, we find that -- except at special commensurate cone angles -- crystals typically form a seam that runs along the axial direction of the cone, while near the tip, a disordered particle packing forms. We show that the onset of disorder results from a finite-size effect that depends strongly on the circumference and not on the seed orientation or cone angle. This finite-size effect occurs also on cylinders, and we present evidence that on both cylinders and cones, the defect density increases exponentially as circumference decreases. We introduce a simple model for particle attachment at the seam that explains the dependence on the circumference. Our findings suggest that the growth of single crystals can become frustrated even very far from the tip when the cone has a small opening angle. These results may provide insights into the observed geometry of conical crystals in biological and materials applications.

AG-2023.02-001

cond-mat.soft

Pressure-induced Shape-shifting of Helical Bacteria

Cesar L. Pastrana, Luyi Qiu, Shahaf Armon, Ulrich Gerland, Ariel Amir

Many bacterial species are helical in form, including the widespread pathogen H. pylori. Motivated by recent experiments on H. pylori showing that cell wall synthesis is not uniform, we investigate the possible formation of helical cell shape induced by elastic heterogeneity. We show, experimentally and theoretically, that helical morphogenesis can be produced by pressurizing an elastic cylindrical vessel with helical reinforced lines. The properties of the pressurized helix are highly dependent on the initial helical angle of the reinforced region. We find that steep angles result in crooked helices with, surprisingly, reduced end-to-end distance upon pressurization. This work helps to explain the possible mechanisms for the generation of helical cell morphologies and may inspire the design of novel pressure-controlled helical actuators.

AG-2015.06-1614

cond-mat.soft

Thermoelectric energy recovery at ionic-liquid/electrode interface

Marco Bonetti, Sawako Nakamae, Bo Tao Huang, Thomas J. Salez, Cecile Wiertel-Gasquet, Michel Roger

A Thermally Chargeable Capacitor containing a binary solution of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)-imide (EMIMTFSI) in acetonitrile is electrically charged by applying a tempera- ture gradient to two ideally polarisable electrodes. The corresponding thermoelectric coefficient is -1.7 mV/K for platinum foil electrodes and -0.3 mV/K for nanoporous carbon electrodes. Stored electrical energy is extracted by discharging the capacitor through a resistor. The measured capacitance of the electrode/ionic- liquid interface is 5 micro $μ$F for each platinum electrode while it becomes four orders of magnitude larger $\approx 36$ mF for a single nanoporous carbon electrode. Reproducibility of the effect through repeated charging-discharging cycles under a steady-state temperature gradient demonstrates the robustness of the electrical charging pro- cess at the liquid/electrode interface. The acceleration of the charging by convective flows is also observed. This offers the possibility to convert waste-heat into electric energy without exchanging electrons between ions and electrodes, in contrast to what occurs in most thermogalvanic cells.

AG-2015.06-1556

cond-mat.soft

Micro-macro transition and simplified contact models for wet granular materials

Sudeshna Roy, Abhinendra Singh, Stefan Luding, Thomas Weinhart

Wet granular materials in a quasi-static steady state shear flow have been studied with discrete particle simulations. Macroscopic quantities, consistent with the conservation laws of continuum theory, are obtained by time averaging and spatial coarse-graining. Initial studies involve understanding the effect of liquid content and liquid properties like the surface tension on the macroscopic quantities. Two parameters of the liquid bridge contact model have been studied as the constitutive parameters that define the structure of this model (i) the rupture distance of the liquid bridge model, which is proportional to the liquid content, and (ii) the maximum adhesive force, as controlled by the surface tension of the liquid. Subsequently a correlation is developed between these micro parameters and the steady state cohesion in the limit of zero confining pressure. Furthermore, as second result, the macroscopic torque measured at the walls, which is an experimentally accessible parameter, is predicted from our simulation results as a dependence on the micro-parameters. Finally, the steady state cohesion of a realistic non-linear liquid bridge contact model scales well with the steady state cohesion for a simpler linearized irreversible contact model with the same maximum adhesive force and equal energy dissipated per contact.

AG-2015.06-1582

cond-mat.soft

Arrest stress of uniformly sheared wet granular matter

S. H. Ebrahimnazhad Rahbari, M. Brinkmann, J. Vollmer

We conduct extensive independent numerical experiments considering frictionless disks without internal degrees of freedom (rotation etc.) in two dimensions. We report here that for a large range of the packing fractions below random-close packing, all components of the stress tensor of wet granular materials remain finite in the limit of zero shear rate. This is direct evidence for a fluid-to-solid arrest transition. The offset value of the shear stress characterizes plastic deformation of the arrested state {which corresponds to {\em dynamic yield stress} of the system}. {Based on an analytical line of argument, we propose that the mean number of capillary bridges per particle, $ν$, follows a non-trivial dependence on the packing fraction, $ϕ$, and the capillary energy, $\vareps$. Most noticeably, we show that $ν$ is a generic and universal quantity which does not depend on the driving protocol.} Using this universal quantity, we calculate the arrest stress, $σ_a$, analytically based on a balance of the energy injection rate due to the external force driving the flow and the dissipation rate accounting for the rupture of capillary bridges. The resulting prediction of $σ_a$ is a non-linear function of the packing fraction $ϕ$, and the capillary energy $\vareps$. This formula provides an excellent, parameter-free prediction of the numerical data. Corrections to the theory for small and large packing fractions are connected to the emergence of shear bands and of contributions to the stress from repulsive particle interactions, respectively.

AG-2015.06-1569

cond-mat.soft

Application of light pressure in the rheology of biopolymers

Sasun G. Gevorkian, Artashes V. Karmenyan, Chin-Kun Hu

Precise measuring the deforming force and observation of the deformation dynamics along with difficulties of micro sample preparation are the main problems which make the micro-scale experiments difficult. Here we present a method for direct observation and measurements of mechanical parameters of elastic microfibrils in air using the pressure of optical light. For DNA microfibers, observation of the behavior dynamics of mechanical characteristics and the method sensitivity to changing the structure are demonstrated.

AG-2015.06-1579

cond-mat.soft

Growth kinetics of NaCl crystals in a drying drop of gelatin: transition from faceted to dendritic growth

Moutushi Dutta Choudhury, Tapati Dutta, Sujata Tarafdar

We report a study on the kinetics of drying of a droplet of aqueous gelatin containing sodium chloride. The process of drying recorded on video, clearly shows different regimes of growth leading to a variety of crystalline patterns. Large faceted crystals of $\sim$mm size form in the early stages of evaporation, followed by highly branched multi-fractal patterns with micron sized features. We simulate the growth using a simple algorithm incorporating aggregation and evaporation, which reproduces the cross-over between the two growth regimes. As evaporation proceeds, voids form in the gel film. The time development of the fluid-void system can be characterized by an Euler number. A minimum in the Euler number marks the transition between the two regimes of growth.

AG-2015.06-1453

cond-mat.soft

Line-tension-induced scenario of heterogeneous nucleation on a spherical substrate and in a spherical cavity

Masao Iwamatsu

Line-tension-induced {scenario of heterogeneous nucleation} is studied for a lens-shaped nucleus with a finite contact angle nucleated on a spherical substrate and on the bottom of the wall of a spherical cavity. The effect of line tension on the free energy of a critical nucleus can be separated from the usual volume term. By comparing the free energy of a lens-shaped critical nucleus of a finite contact angle with that of a spherical nucleus, we find that a spherical nucleus may have a lower free energy than a lens-shaped nucleus when the line tension is positive and large, which is similar to the drying transition predicted by Widom [B. Widom, J. Phys. Chem. {\bf 99} 2803 (1995)]. Then, the homogeneous nucleation rather than the heterogeneous nucleation will be favorable. Similarly, the free energy of a lens-shaped nucleus becomes negative when the line tension is negative and large. Then, the barrier-less nucleation with no thermal activation called athermal nucleation will be realized.

AG-2015.06-1465

cond-mat.soft

On the Equilibrium Shape of Erythrocytes

V. I. Marchenko, E. R. Podolyak

It is shown that the model proposed by Canham quantitatively describes the observed biconcave shape of human erythrocytes.

AG-2015.06-1491

cond-mat.soft

A New Phenomenon: Sub-Tg, Solid-State, Plasticity-Induced Bonding in Polymers

Nikhil Padhye, David M. Parks, Bernhardt L. Trout, Alexander H. Slocum

Polymer self-adhesion due to the interdiffusion of macromolecules has been an active area of research for several decades [70, 43, 62, 42, 72, 73, 41]. Here, we report a new phenomenon of sub-Tg, solid-state, plasticity-induced bonding; where amorphous polymeric films were bonded together in a period of time on the order of a second in the solid-state at ambient temperatures nearly 60 K below their glass transition temperature (Tg) by subjecting them to active plastic deformation. Despite the glassy regime, the bulk plastic deformation triggered the requisite molecular mobility of the polymer chains, causing interpenetration across the interfaces held in contact. Quantitative levels of adhesion and the morphologies of the fractured interfaces validated the sub-Tg, plasticity-induced, molecular mobilization causing bonding. No-bonding outcomes (i) during the compression of films in a near hydrostatic setting (which inhibited plastic flow) and (ii) between an 'elastic' and a 'plastic' film further established the explicit role of plastic deformation in this newly reported sub-Tg solid-state bonding .

AG-2015.06-1326

cond-mat.soft

A Minimal description of morphological hierarchy in two-dimensional aggregates

Tamoghna Das, T. Lookman, M. M. Bandi

A dimensionless parameter $Λ$ is proposed to describe a hierarchy of morphologies in two-dimensional (2D) aggregates formed due to varying competition between short-range attraction and long-range repul- sion. Structural transitions from finite non-compact to compact to percolated structures are observed in the configurations simulated by molecular dynamics at a constant temperature and density. Configurational randomness across the transition, measured by the two-body excess entropy $S_2$, exhibits data collapse with the average potential energy $\bar{\mathcal{E}}$ of the systems. Independent master curves are presented among $S_2$, the reduced second virial coefficient $B_2^*$ and $Λ$, justifying this minimal description. This work lays out a coherent basis for the study of 2D aggregate morphologies relevant to diverse nano- and bio-processes.

AG-2015.06-1380

cond-mat.soft

A computational study of chemically heterogeneous particles: patchy vs. uniform particles in shear flow

Marina Bendersky, Maria M. Santore, Jeffrey M. Davis

The adhesion of flowing particles and biological cells over fixed collecting surfaces is vitally important in diverse situations and potentially controlled by small-scale surface heterogeneity on the particle. Differences in the behavior of patchy particles (flowing over uniform collectors) relative to the reverse case of uniform particles (flowing over patchy collectors) are quantified. Because a particle rotates more slowly than it translates in the shear field near a collecting surface, the effective interaction time of a patch on a particle is larger than that of a patch on the collector, suggesting distinct particle capture tendencies in each case. This paper presents a new computational approach to simulate the near-surface motion (rotation and translation) of particles having nanoscale surface heterogeneities flowing over uniform collectors. Small amounts of ~10 nm cationic patches randomly distributed on a net-negative particle surface produced spatially varying DLVO interactions that were computed via the Grid Surface Integration (GSI) technique and then combined with hydrodynamic forces in a mobility tensor formulation. Statistical analysis of simulated trajectories revealed fewer extrema in the fluctuating particle-collector separation of heterogeneous particles, compared with the reverse system geometry of uniform particles flowing past a heterogeneous fixed surface. Additionally, the patchy particles were captured to a lesser extent on uniform surfaces compared with the case of uniform particles flowing above patchy collectors. Such behavior was dependent on ionic strength, with the greatest differences obtained near a Debye length of $κ^{-1} = 4$ nm for the $2a = 500$ nm simulated particles.

AG-2015.06-1381

cond-mat.soft

The Slowdowns of Water Dynamics when Approaching a Glass Transition or a Solid Interface: A Common Rationale

Felix Klameth, Michael Vogel

Performing molecular dynamics simulations, we investigate the enormous slowdowns of water dynamics when approaching a glass transition or a solid interface. We show that both effects can be described on common grounds within a theoretical framework, which was recently proposed by Schweizer et al. and considers coupled local hopping and elastic distortion. For confined water, we correctly describe the variation of the alpha-relaxation time tau_alpha as a function of both temperature and position with respect to the interface. Exploiting our knowledge of a cooperative length scale xi(T) from the confinement studies, we quantitatively rationalize the glassy slowdown, tau_alpha(T), and the Stokes-Einstein breakdown of bulk water. For both confined and bulk liquid, variations of the alpha-relaxation time are intimately related to changes of the cage-rattling amplitude.

AG-2015.06-1385

cond-mat.soft

Nonlinear electro-osmosis in dilute non-adsorbing polymer solutions with low ionic strength

Yuki Uematsu

Nonlinear behavior of electro-osmosis in dilute non-adsorbing polymer solutions with low salinity is investigated with Brownian dynamics simulations and a kinetic theory. In the Brownian simulations, the hydrodynamic interaction between the polymers and a no-slip wall is considered with Rotne-Prager approximation of Blake tensor. In a plug flow under a sufficiently strong applied electric field, the polymer migrates toward the bulk, forming a depletion layer thicker than the equilibrium one. Consequently, the electro-osmotic mobility increases nonlinearly with the electric field and gets saturated. This nonlinear mobility qualitatively does not depend on the details of rheological properties of the polymer solution. Analytical calculation of the kinetic theory for the same system reproduces quantitatively well the results of the Brownian dynamics simulation.

AG-2015.06-1389

cond-mat.soft

Equilibrium of fluid membranes with tangent-plane order (TPO), elasticity of smectics with TPO, and dispiration asymmetry in smectics-C*

Jaya Kumar A., Buddhapriya Chakrabarti, Yashodhan Hatwalne

Fluid membranes endowed with tangent-plane order (TPO) such as tilt- and hexatic order afford unique soft matter systems for investigating the interplay between elasticity, shape, topology, and thermal fluctuations. Using the spin-connection formulation of membrane energy we obtain equa- tions of equilibrium together with free boundary conditions for ground states of such membranes. We extend the spin-connection formulation to smectic liquid crystals with TPO and show that for chiral smectics-C* this generalization leads to experimentally verifiable consequences for dispirations having topological indices (helicities) of the same magnitude but opposite signs.

AG-2015.06-1267

cond-mat.soft

Crystallization of Crystalline/Crystalline Symmetric Polymer Blends Studied by Dynamic Monte Carlo Simulations

Ashok Kumar Dasmahapatra

In this paper, we report dynamic Monte Carlo simulation results on the crystallization of crystalline/crystalline (A/B) symmetric binary polymer blend, wherein the melting temperature of A-polymer is higher than B-polymer. Crystallization of A-polymer precedes the crystallization of B-polymer upon cooling from a homogeneous melt. The morphological development is controlled by the interplay between crystallization and macrophase separation. With increasing segregation strength, smaller and thinner crystals form with lesser crystallinity. During the process, A-polymer crystallizes first followed by the crystallization of B-polymer in the presence of already crystalline domains A-polymer. Thus, crystallization of B-polymer slows down influencing overall crystal morphology. With increasing segregation strength between two polymers, we observe a decreasing trend in mean square radius of gyration, reflecting the increased repulsive interaction between them. As a consequence, a large number of smaller size crystals form with lesser crystallinity. Isothermal crystallization reveals that the transition pathways strongly depend on segregation strength. We also observe a path-dependent crystallization behavior in isothermal crystallization: two-step (sequential) isothermal crystallization yields superior crystalline structure in both A- and B-polymers than one-step (coincident).

AG-2015.06-1108

cond-mat.soft

Stress-structure relation in dense colloidal melt under forward and instantaneous reversal of shear

Amit Kumar Bhattacharjee

Dense supercooled colloidal melt in forward shear from a quiescent state shows overshoot in shear stress at 10% strain with an unchanged fluid structure at equal stress before and after overshoot. In addition, we find overshoot in normal stress with a monotonic increase in osmotic pressure at an identical strain. The first and second normal stress become comparable in magnitude and opposite in sign. Functional dependence of the steady state stress and osmotic pressure with Peclet number demonstrate signature of crossover between Newtonian and nearly- Newtonian regime. Moreover, instantaneous shear reversal from steady state exhibit Bauschinger effect, where strong history dependence is observed depending on the time of flow reversal. The distribution of particulate stress and osmotic pressure at the point of flow reversal is shown to be a signature of the subsequent response. We link the history dependence of the stress-strain curves to changes in the fluid structure measured through the angular components of the radial distribution function. A uniform compression in transition from forward to reversed flowing state is found.

AG-2015.06-1128

cond-mat.soft

Self-assembly of DNA-functionalized colloids

Panagiotis E. Theodorakis, Nikolaos G. Fytas, Gerhard Kahl, Christoph Dellago

Colloidal particles grafted with single-stranded DNA (ssDNA) chains can self-assemble into a number of different crystalline structures, where hybridization of the ssDNA chains creates links between colloids stabilizing their structure. Depending on the geometry and the size of the particles, the grafting density of the ssDNA chains, and the length and choice of DNA sequences, a number of different crystalline structures can be fabricated. However, understanding how these factors contribute synergistically to the self-assembly process of DNA-functionalized nano- or micro-sized particles remains an intensive field of research. Moreover, the fabrication of long-range structures due to kinetic bottlenecks in the self-assembly are additional challenges. Here, we discuss the most recent advances from theory and experiment with particular focus put on recent simulation studies.

AG-2015.06-1141

cond-mat.soft

A fractal classification of the drainage dynamics in thin liquid films

R. Tsekov, E. Evstatieva

It is demonstrated that the dynamic structure is very important for the rate of drainage of a thin liquid film and it can be effectively taken into account by a dynamic fractal dimension. It is shown that the latter is a powerful tool for description of the film drainage and classifies all the known results from the literature. The obtained general expression for the thinning rate is a heuristic one and predicts variety of drainage models, which are even difficult to simulate in practice. It is a typical example of a scaling law, which explains the origin of the complicate dependence of the thinning rate on the film radius.

AG-2015.06-986

cond-mat.soft

On a molecular based Q-tensor model for liquid crystals with density variations

Song Mei, Pingwen Zhang

In this article, we study the new Q-tensor model previously derived from Onsager's molecular theory by Han \textit{et al.} [Arch. Rational Mech. Anal., 215.3 (2014), pp. 741-809] for static liquid crystal modeling. Taking density and Q-tensor as order parameters, the new Q-tensor model not only characterizes important phases while capturing density variation effects, but also remains computationally tractable and efficient. We report the results of two numerical applications of the model, namely the isotropic--nematic--smectic-A--smectic-C phase transitions and the isotropic--nematic interface problem, in which density variations are indispensable. Meanwhile, we show the connections of the new Q-tensor model with classical models including generalized Landau-de Gennes models, generalized McMillan models, and the Chen-Lubensky model. The new Q-tensor model is the pivot and an appropriate trade-off between the classical models in three scales.

AG-2015.06-1013

cond-mat.soft

Bridging and depletion mechanisms in colloid-colloid effective interactions: A reentrant phase diagram

Riccardo Fantoni, Achille Giacometti, Andrés Santos

A general class of nonadditive sticky-hard-sphere binary mixtures, where small and large spheres represent the solvent and the solute, respectively, is introduced. The solute-solute and solvent-solvent interactions are of hard-sphere type, while the solute-solvent interactions are of sticky-hard-sphere type with tunable degrees of size nonadditivity and stickiness. Two particular and complementary limits are studied using analytical and semi-analytical tools. The first case is characterized by zero nonadditivity, lending itself to a Percus-Yevick approximate solution from which the impact of stickiness on the spinodal curves and on the effective solute-solute potential is analyzed. In the opposite nonadditive case, the solvent-solvent diameter is zero and the model can then be reckoned as an extension of the well-known Asakura-Oosawa model with additional sticky solute-solvent interaction. This latter model has the property that its exact effective one-component problem involves only solute-solute pair potentials for size ratios such that a solvent particle fits inside the interstitial region of three touching solutes. In particular, we explicitly identify the three competing physical mechanisms (depletion, pulling, and bridging) giving rise to the effective interaction. Some remarks on the phase diagram of these two complementary models are also addressed through the use of the Noro-Frenkel criterion and a first-order perturbation analysis. Our findings suggest reentrance of the fluid-fluid instability as solvent density (in the first model) or adhesion (in the second model) is varied. Some perspectives in terms of the interpretation of recent experimental studies of microgels adsorbed onto large polystyrene particles are discussed.

AG-2015.06-1026

cond-mat.soft

Macroscopic model with anisotropy based on micro-macro informations

Nishant Kumar, Stefan Luding, Vanessa Magnanimo

Physical experiments can characterize the elastic response of granular materials in terms of macroscopic state-variables, namely volume (packing) fraction and stress, while the microstructure is not accessible and thus neglected. Here, by means of numerical simulations, we analyze dense, frictionless, granular assemblies with the final goal to relate the elastic moduli to the fabric state, i.e., to micro-structural averaged contact network features as contact number density and anisotropy. The particle samples are first isotropically compressed and later quasi-statically sheared under constant volume (undrained conditions). From various static, relaxed configurations at different shear strains, now infinitesimal strain steps are applied to "measure" the effective elastic response; we quantify the strain needed so that plasticity in the sample develops as soon as contact and structure rearrangements happen. Because of the anisotropy induced by shear, volumetric and deviatoric stresses and strains are cross-coupled via a single anisotropy modulus, which is proportional to the product of deviatoric fabric and bulk modulus (i.e. the isotropic fabric). Interestingly, the shear modulus of the material depends also on the actual stress state, along with the contact configuration anisotropy. Finally, a constitutive model based on incremental evolution equations for stress and fabric is introduced. By using the previously measured dependence of the stiffness tensor (elastic moduli) on the microstructure, the theory is able to predict with good agreement the evolution of pressure, shear stress and deviatoric fabric (anisotropy) for an independent undrained cyclic shear test, including the response to reversal of strain.

AG-2015.06-1078

cond-mat.soft

Escherichia coli as a model active colloid: a practical introduction

Jana Schwarz-Linek, Jochen Arlt, Alys Jepson, Angela Dawson, Teun Vissers, Dario Miroli, Teuta Pilizota, Vincent A. Martinez, Wilson C. K. Poon

The flagellated bacterium Escherichia coli is increasingly used experimentally as a self-propelled swimmer. To obtain meaningful, quantitative results that are comparable between different laboratories, reproducible protocols are needed to control, `tune' and monitor the swimming behaviour of these motile cells. We critically review the knowledge needed to do so, explain methods for characterising the colloidal and motile properties of E.coli, cells, and propose a protocol for keeping them swimming at constant speed at finite bulk concentrations. In the process of establishing this protocol, we use motility as a high-throughput probe of aspects of cellular physiology via the coupling between swimming speed and the proton motive force.

AG-2015.06-1048

cond-mat.soft

Predicting Fracture Energies and Crack-Tip Fields of Soft Tough Materials

Teng Zhang, Shaoting Lin, Hyunwoo Yuk, Xuanhe Zhao

Soft materials including elastomers and gels are pervasive in biological systems and technological applications. Whereas it is known that intrinsic fracture energies of soft materials are relatively low, how the intrinsic fracture energy cooperates with mechanical dissipation in process zone to give high fracture toughness of soft materials is not well understood. In addition, it is still challenging to predict fracture energies and crack-tip strain fields of soft tough materials. Here, we report a scaling theory that accounts for synergistic effects of intrinsic fracture energies and dissipation on the toughening of soft materials. We then develop a coupled cohesive-zone and Mullins-effect model capable of quantitatively predicting fracture energies of soft tough materials and strain fields around crack tips in soft materials under large deformation. The theory and model are quantitatively validated by experiments on fracture of soft tough materials under large deformations. We further provide a general toughening diagram that can guide the design of new soft tough materials.

AG-2015.06-937

cond-mat.soft

Anomalous Brownian motion of colloidal particle in a nematic environment: effect of the director fluctuations

T. Turiv, A. Brodin, V. Nazarenko

As recently reported [Turiv T. et al., Science, 2013, Vol. 342, 1351], fluctuations in the orientation of the liquid crystal (LC) director can transfer momentum from the LC to a colloid, such that the diffusion of the colloid becomes anomalous on a short time scale. Using video microscopy and single particle tracking, we investigate random thermal motion of colloidal particles in a nematic liquid crystal for the time scales shorter than the expected time of director fluctuations. At long times, compared to the characteristic time of the nematic director relaxation we observe typical anisotropic Brownian motion with the mean square displacement (MSD) linear in time $τ$ and inversly proportional to the effective viscosity of the nematic medium. At shorter times, however, the dynamics is markedly nonlinear with MSD growing more slowly (subdiffusion) or faster (superdiffusion) than $τ$. These results are discussed in the context of coupling of colloidal particle's dynamics to the director fluctuation dynamics.

AG-2015.06-947

cond-mat.soft

Adsorption of symmetric random copolymer onto symmetric random surface: the annealed case

A. A. Polotsky

Adsorption of a symmetric (AB) random copolymer (RC) onto a symmetric (ab) random heterogeneous surface (RS) is studied in the annealed approximation by using a two-dimensional partially directed walk model of the polymer. We show that in the symmetric case, the expected a posteriori compositions of the RC and the RS have correct values (corresponding to their a priori probabilities) and do not change with the temperature, whereas second moments of monomers and sites distributions in the RC and RS change. This indicates that monomers and sites do not interconvert but only rearrange in order to provide better matching between them and, as a result, a stronger adsorption of the RC on the RS. However, any violation of the system symmetry shifts equilibrium towards the major component and/or more favorable contacts and leads to interconversion of monomers and sites.

AG-2015.06-773

cond-mat.soft

Elasticidad de las membranas biológicas

L. Martínez-Balbuena, A. Maldonado-Arce, E. Hernández-Zapata

In this article we review the present knowledge on the elastic properties of membranes of biological origin. Assuming the fluid mosaic hypothesis, we consider the phospholipid bilayer as the structural base of a biological membrane. We expose a model due to Helfrich which can be used to obtain an expression for the membrane elastic energy. The free energy is completely characterized by two local principal curvatures and four parameters that depend on the chemical composition of the membrane and its local environment. In addition we present the theoretical justification of an experimental method (the Micropipette Manipulation technique) that may be used to measure the membrane rigidity. Finally, we describe some physical consequences of these concepts, such as the explanation of the lamellar-sponge phase transition and the emergence of the steric interaction between membranes. ------ Se presenta una revisión del conocimiento actual sobre las propiedades elásticas de las membranas. Bajo la hipótesis del mosaico fluido se considera a una bicapa de fosfolípido como la base estructural de una membrana biológica y se expone un modelo debido a Helfrich a partir del cuál se obtiene una expresión para la energía elástica de una membrana. La energía libre queda completamente caracterizada por sus curvaturas locales principales y cuatro parámetros dependientes de la composición química de la membrana y de su entorno local. Se expone la justificación teórica de un método experimental que permite medir la constante elástica de curvatura media de una membrana. Finalmente se describen algunas consecuencias físicas de estos conceptos, como la explicación de la transición de una fase lamelar a una esponja, o la aparición de la interacción estérica entre membranas.

AG-2015.06-828

cond-mat.soft

Instabilities, defects, and defect ordering in an overdamped active nematic

Elias Putzig, Gabriel S. Redner, Arvind Baskaran, Aparna Baskaran

We consider a phenomenological continuum theory for an extensile, overdamped active nematic liquid crystal, applicable in the dense regime. Constructed from general principles, the theory is universal, with parameters independent of any particular microscopic realization. We show that it exhibits a bend instability similar to that seen in active suspensions, that leads to the proliferation of defects. We find three distinct nonequilibrium steady states: a defect-ordered nematic in which $+\frac{1}{2}$ disclinations develop polar ordering, an undulating nematic state with no defects, and a turbulent defective nematic. We characterize the phenomenology of these phases and identify the relationship of this theoretical description to experimental realizations and other theoretical models of active nematics.

AG-2015.06-623

cond-mat.soft

Nonequilibrium Glass Transition in Mixtures of Active-Passive Particles

Huai Ding, Mengkai Feng, Huijun Jiang, Zhonghuai Hou

We develop a mode coupling theory(MCT) to study the nonequilibrium glass transition behavior of a mono-disperse mixture of active-passive hard-sphere particles. The MCT equations clearly demonstrate that the glass transition is shifted to higher values of total volume fraction when doping a passive system with active particles. Interestingly, we find that the glass transition point may show a non-monotonic dependence on the effective diffusivity of the active component, indicating a nontrivial type of activity induced reentrance behavior. Analysis based on the nonergodic parameters suggest that the glassy state at small activity is due to the caging effect, while that at high activity could result from activity induced dynamic clustering.

AG-2015.06-464

cond-mat.soft

The constitutive behaviour of strong cohesive particulate gels in compression

A. A. Aziz, R. Buscall, R. de Kretzer, M. Kristjansson, P. J. Scales, A. D. Stickland, H-E Teo, S. P. Usher, K. Keiding

A simple and popular constitutive model used to describe the compressional strength of a consolidating strongly cohesive particulate gel is tested further with new experimental data. Strong cohesive particulate gels have variously been described as being ratchet (poro) elastic, on the one hand, and as having a yield stress in compression, on the other, to the point where same groups of workers have used both descriptions at one time or another. The dichotomy is real though as such gels do show a hitherto somewhat puzzling elastic-plastic duality. This can be explained in part by the strong concentration dependence of the modulus since this leads to irreversible volumetric strain-hardening, in effect, the ratchet; but only in small part. The real problem seems to be that, until very recently, most work on consolidation has neglected what what Michaels and Bolger told us to do over 50 years ago, viz. to take into wall adhesion into account, most cohesive particulate gels being adhesive too. Since wall adhesive failure is plastic in character, the simplest non-linear elastic model of compressive strength can be combined with the simplest possible model of wall debonding to produce a approximate complete constitutive description. Examples of the use of such a description in detailed modelling of consolidation equilibrium can be found in refs 10-12. Consolidation dynamics with wall adhesion is a substantial modelling challenge remaining to be tackled.

AG-2015.06-504

cond-mat.soft

Anomalous diffusion from Brownian motion with random confinement

Gerald John Lapeyre

We present a model of anomalous diffusion consisting of an ensemble of particles undergoing homogeneous Brownian motion except for confinement by randomly placed reflecting boundaries. For power-law distributed compartment sizes, we calculate exact and asymptotic values of the ensemble averaged mean squared displacement and find that it increases subdiffusively, as either a power or the logarithm of time. Numerical simulations show that the probability density function of the displacement is non-Gaussian. We discuss the relevance of the model for the analysis of single-particle tracking experiments and its relation to other sources of subdiffusion. In particular we discuss an intimate connection with diffusion on percolation processes.

AG-2015.06-537

cond-mat.soft

Modeling Barkhausen Noise in Magnetic Glasses with Dipole-Dipole Interactions

Awadhesh K. Dubey, H. George E. Hentschel, Prabhat K. Jaiswal, Chandana Mondal, Itamar Procaccia, Bhaskar Sen Gupta

Long-ranged dipole-dipole interactions in magnetic glasses give rise to magnetic domains having labyrinthine patterns. Barkhausen Noise is then expected to result from the movement of domain boundaries which is supposed to be modeled by the motion of elastic membranes with random pinning. We propose an atomistic model of such magnetic glasses in which we measure the Barkhausen Noise which indeed results from the movement of domain boundaries. Nevertheless the statistics of the Barkhausen Noise is found in striking disagreement with the expectations in the literature. In fact we find exponential statistics without any power law, stressing the fact that Barkhausen Noise can belong to very different universality classes. In this glassy system the essence of the phenomenon is the ability of spin-carrying particles to move and minimize the energy without any spin flip. A theory is offered in excellent agreement with the measured data without any free parameter.

AG-2015.06-1268

cond-mat.soft

Yield stress and elasticity influence on surface tension measurements

Loren Jørgensen, Marie Le Merrer, Hélène Delanoë-Ayari, Catherine Barentin

We have performed surface tension measurements on carbopol gels of different concentrations and yield stresses. Our setup, based on the force exerted by a capillary bridge on two parallel plates, allows to measure an effective surface tension of the complex fluid and to investigate the influence of flow history. More precisely the effective surface tension measured after stretching the bridge is always higher than after compressing it. The difference between the two values is due to the existence of a yield stress in the fluid. The experimental observations are successfully reproduced with a simple elasto-plastic model. The shape of successive stretching-compression cycles can be described by taking into account the yield stress and the elasticity of the gel. We show that the surface tension $γ_{LV}$ of yield stress fluids is the mean of the effective surface tension values only if the elastic modulus is high compared to the yield stress. This work highlights that thermodynamical quantities measurements are challenged by the fluid out-of-equilibrium state implied by jamming, even at small scales where the shape of the bridge is driven by surface energy. Therefore setups allowing deformation in opposite directions are relevant for measurements on yield stress fluids.

AG-2015.06-165

cond-mat.soft

Nonmonotonic fracture behavior of polymer nanocomposites

Janaina G. de Castro, Rojman Zargar, Mehdi Habibi, Samet H. Varol, Sapun H. Parekh, Babak Hosseinkhani, Mokhtar Adda-Bedia, Daniel Bonn

Polymer composite materials are widely used for their exceptional mechanical properties, notably their ability to resist large deformations. Here we examine the failure stress and strain of rubbers reinforced by varying amounts of nano-sized silica particles. We find that small amounts of silica increase the fracture stress and strain, but too much filler makes the material become brittle and consequently fracture happens at small deformations. We thus find that as a function of the amount of filler there is an optimum in the breaking resistance at intermediate filler concentrations. We use a modified Griffith theory to establish a direct relation between the material properties and the fracture behavior that agrees with the experiment.

AG-2015.06-061

cond-mat.soft

Percolation in suspensions of polydisperse hard rods : quasi-universality and finite-size effects

Hugues Meyer, Paul van der Schoot, Tanja Schilling

We present a study of connectivity percolation in suspensions of hard spherocylinders by means of Monte Carlo simulation and connectedness percolation theory. We focus attention on polydispersity in the length, the diameter and the connectedness criterion, and invoke bimodal, Gaussian and Weibull distributions for these. The main finding from our simulations is that the percolation threshold shows quasi universal behaviour, i.e., to a good approximation it depends only on certain cumulants of the full size and connectivity distribution. Our connectedness percolation theory hinges on a Lee-Parsons type of closure recently put forward that improves upon the often-used second virial approximation [ArXiv e-prints, May 2015, 1505.07660]. The theory predicts exact universality. Theory and simulation agree quantitatively for aspect ratios in excess of 20, if we include the connectivity range in our definition of the aspect ratio of the particles. We further discuss the mechanism of cluster growth that, remarkably, differs between systems that are polydisperse in length and in width, and exhibits non-universal aspects.

AG-2015.06-243

cond-mat.soft

Scaling of discrete element model parameters for cohesionless and cohesive solid

Subhash C. Thakur, Jin Y. Ooi, Hossein Ahmadian

One of the major shortcomings of discrete element modelling (DEM) is the computational cost required when the number of particles is huge, especially for fine powders and/or industry scale simulations. This study investigates the scaling of model parameters that is necessary to produce scale independent predictions for cohesionless and cohesive solid under quasi-static simulation of confined compression and unconfined compression to failure in uniaxial test. A bilinear elasto-plastic adhesive frictional contact model was used. The results show that contact stiffness (both normal and tangential) for loading and unloading scales linearly with the particle size and the adhesive force scales very well with the square of the particle size. This scaling law would allow scaled up particle DEM model to exhibit bulk mechanical loading response in uniaxial test that is similar to a material comprised of much smaller particles. This is a first step towards a mesoscopic representation of a cohesive powder that is phenomenological based to produce the key bulk characteristics of a cohesive solid and has the potential to gain considerable computational advantage for industry scale DEM simulations.

AG-2015.05-2273

cond-mat.soft

Morphing of Geometric Composites via Residual Swelling

Matteo Pezzulla, Steven A. Shillig, Paola Nardinocchi, Douglas P. Holmes

Understanding and controlling the shape of thin, soft objects has been the focus of significant research efforts among physicists, biologists, and engineers in the last decade. These studies aim to utilize advanced materials in novel, adaptive ways such as fabricating smart actuators or mimicking living tissues. Here, we present the controlled growth--like morphing of 2D sheets into 3D shapes by preparing geometric composite structures that deform by residual swelling. The morphing of these geometric composites is dictated by both swelling and geometry, with diffusion controlling the swelling-induced actuation, and geometric confinement dictating the structure's deformed shape. Building on a simple mechanical analog, we present an analytical model that quantitatively describes how the Gaussian and mean curvatures of a thin disk are affected by the interplay among geometry, mechanics, and swelling. This model is in excellent agreement with our experiments and numerics. We show that the dynamics of residual swelling is dictated by a competition between two characteristic diffusive length scales governed by geometry. Our results provide the first 2D analog of Timoshenko's classical formula for the thermal bending of bimetallic beams - our generalization explains how the Gaussian curvature of a 2D geometric composite is affected by geometry and elasticity. The understanding conferred by these results suggests that the controlled shaping of geometric composites may provide a simple complement to traditional manufacturing techniques.

AG-2015.05-2180

cond-mat.soft

Bubble formation in water with addition of a hydrophobic solute

Ryuichi Okamoto, Akira Onuki

We show that phase separation can occur in a one-component liquid outside its coexistence curve (CX) with addition of a small amount of a solute. The solute concentration at the transition decreases with increasing the difference of the solvation chemical potential between liquid and gas. As a typical bubble-forming solute, we consider ${\rm O}_2$ in ambient liquid water, which exhibits mild hydrophobicity and its critical temperature is lower than that of water. Such a solute can be expelled from the liquid to form gaseous domains while the surrounding liquid pressure is higher than the saturated vapor pressure $p_{cx}$. This solute-induced bubble formation is a first-order transition in bulk and on a partially dried wall, while a gas film grows continuously on a completely dried wall. We set up a bubble free energy $ΔG$ for bulk and surface bubbles with a small volume fraction $ϕ$. It becomes a function of the bubble radius $R$ under the Laplace pressure balance. Then, for sufficiently large solute densities above a threshold, $ΔG$ exhibits a local maximum at a critical radius and a minimum at an equilibrium radius. We also examine solute-induced nucleation taking place outside CX, where bubbles larger than the critical radius grow until attainment of equilibrium.

AG-2015.05-2203

cond-mat.soft

Generation of defects and disorder from deeply quenching a liquid to form a solid

A. J. Archer, M. C. Walters, U. Thiele, E. Knobloch

We show how deeply quenching a liquid to temperatures where it is linearly unstable and the crystal is the equilibrium phase often produces crystalline structures with defects and disorder. As the solid phase advances into the liquid phase, the modulations in the density distribution created behind the advancing solidification front do not necessarily have a wavelength that is the same as the equilibrium crystal lattice spacing. This is because in a deep enough quench the front propagation is governed by linear processes, but the crystal lattice spacing is determined by nonlinear terms. The wavelength mismatch can result in significant disorder behind the front that may or may not persist in the latter stage dynamics. We support these observations by presenting results from dynamical density functional theory calculations for simple one- and two-component two-dimensional systems of soft core particles.

AG-2015.05-2211

cond-mat.soft

Water: one molecule, two surfaces, one mistake

Carlos Vega

In order to rigorously evaluate the energy and dipole moment of a certain configuration of molecules one needs to solve the Schrödinger equation. Repeating this for many different configurations allows one to determine the potential energy surface (PES) and the dipole moment surface (DMS). Since the early days of computer simulation it has been implicitly accepted that for empirical potentials the charges used to fit the PES should also be used to describe the DMS. This is a mistake. Partial charges are not observable magnitudes. They should be regarded as adjustable fitting parameters. Optimal values used to describe the PES are not necessarily the best to describe the DMS. One could use two fits: one for the PES, and another for the DMS. This is a common practice in the quantum chemistry community, but not used so often by the community performing computer simulations. This idea affects all types of modelling of water (with the exception of ab-initio calculations) from coarse grained to non-polarizable and polarizable models. We anticipate that an area that will benefit dramatically from having both, a good PES and a good DMS, is the modelling of water in the presence of electric fields.

AG-2015.05-2226

cond-mat.soft

Analytical Form of Forces in Hydrophobic Collapse

J. Chakrabarti, Suman Dutta

We calculate analytically the forces between two solvophobic solutes, considering a model system. We show that the effective interaction forces between two solvophobic solutes, mediated by the solvent, is attractive for short ranges, which decreases linearly with surface-to-surface separation s between the solutes and repulsive in the long range falling off as 1 / s 4 . The attraction originates from the unbalanced Laplace force at the liquid-gas interface, generated by the repulsive interaction with the solvent particles, around the solutes at small s. The long range part arises due to unbalanced osmotic pressure. We illustrate the calculations for the Lennard-Jones solvent. We discuss the general implication of our results in the context of hydrophobic collapse.

AG-2015.05-2091

cond-mat.soft

Steady shear magnetorheology in Co0.9Ni0.1 nanocluster-based MR fluids at elevated temperatures

Injamamul Arief, P. K. Mukhopadhyay

In this paper, we present the study of magnetorheological properties of magnetic fluids containing Co0.9Ni0.1 nanocluster that have been measured as a function of both magnetic field and temperature. Co-rich nanoclusters were synthesized by conventional homogeneous nucleation in liquid polyol. Morphological characterization using FESEM revealed the non-aggregated nature of nanoclusters with an average diameter of 450 nm. Crystal structure and room temperature magnetization measurements were performed by powder XRD and vibrating sample magnetometry (VSM). Two MR samples of different particle volume fractions were prepared. Temperature-dependent steady shear MR characterizations for both the samples in the range of 250C-550C demonstrated systematic decline of MR parameters with increasing temperatures. The temperature-induced thinning of shear stress and viscosity was explained in terms of change in effective volume fraction and magnetic saturation. To analyze the measured variation in MR response with increasing temperature, suitable temperature-sensitive scaling parameters were also constructed. Finally to generalize the trend, rheological master curves were constructed by using time-temperature-field superposition method.

AG-2015.05-2109

cond-mat.soft

A Master equation for force distributions in polydisperse frictional particles

Kuniyasu Saitoh, Vanessa Magnanimo, Stefan Luding

An incremental evolution equation, i.e. a Master equation in statistical mechanics, is introduced for force distributions in polydisperse frictional particle packings. As basic ingredients of the Master equation, the conditional probability distributions of particle overlaps are determined by molecular dynamics simulations. Interestingly, tails of the distributions become much narrower in the case of frictional particles than frictionless particles, implying that correlations of overlaps are strongly reduced by microscopic friction. Comparing different size distributions, we find that the tails are wider for the wider distribution.

AG-2015.05-2576

cond-mat.soft

Unified Theory of Inertial Granular Flows and Non-Brownian Suspensions

E. DeGiuli, G. Düring, E. Lerner, M. Wyart

Rheological properties of dense flows of hard particles are singular as one approaches the jamming threshold where flow ceases, both for aerial granular flows dominated by inertia, and for over-damped suspensions. Concomitantly, the lengthscale characterizing velocity correlations appears to diverge at jamming. Here we introduce a theoretical framework that proposes a tentative, but potentially complete scaling description of stationary flows. Our analysis, which focuses on frictionless particles, applies {\it both} to suspensions and inertial flows of hard particles. We compare our predictions with the empirical literature, as well as with novel numerical data. Overall we find a very good agreement between theory and observations, except for frictional inertial flows whose scaling properties clearly differ from frictionless systems. For over-damped flows, more observations are needed to decide if friction is a relevant perturbation or not. Our analysis makes several new predictions on microscopic dynamical quantities that should be accessible experimentally.

AG-2015.05-1981

cond-mat.soft

Catenoid stability with a free contact line

Amir Akbari, Reghan J. Hill, Theo G. M. van de Ven

Contact-drop dispensing is central to many small-scale applications, such as direct-scanning probe lithography and micromachined fountain-pen techniques. Accurate and controllable dispensing required for nanometer-resolved surface patterning hinges on the stability and breakup of liquid bridges. Here, we analytically study the stability of catenoids pinned at one contact line with the other free to move on a substrate subject to axisymmetric and non-axisymmetric perturbations. We apply a variational formulation to derive the corresponding stability criteria. The maximal stability region and stability region are represented in the favourable and canonical phase diagrams, providing a complete description of catenoid equilibrium and stability. All catenoids are stable with respect to non-axisymmetric perturbations. For a fixed contact angle, there exists a critical volume below which catenoids are unstable to axisymmetric perturbations. Equilibrium solution multiplicity is discussed in detail, and we elucidate how geometrical symmetry is reflected in the maximal stability and stability regions.

AG-2015.05-1996

cond-mat.soft

Stability and folds in an elastocapillary system

Amir Akbari, Reghan J. Hill, Theo G. M. van de Ven

We examine the equilibrium and stability of an elastocapillary system to model drying-induced structural failures. The model comprises a circular elastic membrane with a hole at the center that is deformed by the capillary pressure of simply connected and doubly connected menisci. Using variational and spectral methods, stability is related to the slope of equilibrium branches in the liquid content versus pressure diagram for the constrained and unconstrained problems. The second-variation spectra are separately determined for the membrane and meniscus, showing that the membrane out-of-plane spectrum and the in-plane spectrum at large elatocapillary numbers are both positive, so that only meniscus perturbations can cause instability. At small elastocapillary numbers, the in-plane spectrum has a negative eigenvalue, inducing wrinkling instabilities in thin membranes. In contrast, the smallest eigenvalue of the meniscus spectrum always changes sign at a pressure turning point where stability exchange occurs in the unconstrained problem. We also examine configurations in which the meniscus and membrane are individually stable, while the elastocapillary system as a whole is not; this emphasizes the connection between stability and the coupling of elastic and capillary forces.

AG-2015.05-2083

cond-mat.soft

Experiments demonstrate that the null space of the rigidity matrix determines grain motion during vibration-induced compaction

A. Hubard, C. S. O'Hern, M. D. Shattuck

Using a previously developed experimental method to reduce friction in mechanically stable packings of disks, we find that frictional packings form tree-like structures of geometrical families that lie on reduced dimensional manifolds in configuration space. Each branch of the tree begins at a point in configuration space with an isostatic number of contacts and spreads out to sequentially higher dimensional manifolds as the number of contacts are reduced. We find that gravitational deposition of disks produces an initially under-coordinated packing stabilized by friction on a high-dimensional manifold. Using short vibration bursts to reduce friction, we compact the system through many stable configurations with increasing contact number and decreasing dimensionality until the system reaches an isostatic frictionless state. We find that this progression can be understood as the system moving through the null-space of the rigidity matrix defined by the interparticle contact network in the direction of the gravitational force. We suggest that this formalism can also be used to explain the evolution of frictional packings under other forcing conditions.

AG-2015.05-1782

cond-mat.soft

Energy flow between two hydrodynamically coupled particles kept at different effective temperatures

Antoine Bérut, Artyom Petrosyan, Sergio Ciliberto

We measure the energy exchanged between two hydrodynamically coupled micron-sized Brownian particles trapped in water by two optical tweezers. The system is driven out of equilibrium by random forcing the position of one of the two particles. The forced particle behaves as it has an "effective temperature" higher than that of the other bead. This driving modifies the equilibrium variances and cross-correlation functions of the bead positions: we measure an energy flow between the particles and an instantaneous cross-correlation, proportional to the effective temperature difference between the two particles. A model of the interaction which is based on classical hydrodynamic coupling tensors is proposed. The theoretical and experimental results are in excellent agreement.

AG-2015.05-1877

cond-mat.soft

Glass formation in a mixture of hard disks and hard ellipses

Wen-Sheng Xu, Xiaozheng Duan, Zhao-Yan Sun, Li-Jia An

We present an event-driven molecular dynamics study of glass formation in two-dimensional binary mixtures composed of hard disks and hard ellipses, where both types of particles have the same area. We demonstrate that characteristic glass-formation behavior appears upon compression under appropriate conditions in such systems. In particular, while a rotational glass transition occurs only for the ellipses, both types of particles undergo a kinetic arrest in the translational degrees of freedom at a single density. The translational dynamics for the ellipses is found to be faster than that for the disks within the same system, indicating that shape anisotropy promotes the translational motion of particles. We further examine the influence of mixture's composition and aspect ratio on the glass formation. For the mixtures with an ellipse aspect ratio of $k=2$, both translational and rotational glass transition densities decrease with increasing the disk concentration at a similar rate and hence, the two glass transitions remain close to each other at all concentrations investigated. By elevating $k$, however, the rotational glass transition density diminishes at a faster rate than the translational one, leading to the formation of an orientational glass for the ellipses between the two transitions. Our simulations imply that mixtures of particles with different shapes emerge as a promising model for probing the role of particle shape in determining the properties of glass-forming liquids. Furthermore, our work illustrates the potential of using knowledge concerning the dependence of glass-formation properties on mixture's composition and particle shape to assist in the rational design of amorphous materials.

AG-2015.05-1884

cond-mat.soft

Effect of milk fat content on the viscoelasticity of mozzarella-type cheese curds

Hiroyuki Shima, Morimasa Tanimoto

The effect of fat content in cheese curds on their rheological properties was examined using dynamic shear measurements. Surplus fat addition to milk samples caused two distinct types of changes in the temperature dependence of the viscoelastic moduli of resultant curds. The first was a significant reduction in the moduli over a wide temperature range, which is attributed to the presence of liquefied fat globules within the milk protein network. The second was the excess contribution to the low-temperature moduli owing to the reinforcing effect of solidified fat globules. An upward shift in the sol-gel phase transition temperature driven by an increased fat content was also observed.

AG-2015.05-1899

cond-mat.soft

Reference Interaction Site Model and Optimized Perturbation theories of colloidal dumbbells with increasing anisotropy

Gianmarco Munaò, Francisco Gàmez, Dino Costa, Carlo Caccamo, Francesco Sciortino, Achille Giacometti

We investigate thermodynamic properties of anisotropic colloidal dumbbells in the frameworks provided by the Reference Interaction Site Model (RISM) theory and an Optimized Perturbation Theory (OPT), this latter based on a fourth-order high-temperature perturbative expansion of the free energy, recently generalized to molecular fluids. Our model is constituted by two identical tangent hard spheres surrounded by square-well attractions with same widths and progressively different depths. Gas-liquid coexistence curves are obtained by predicting pressures, free energies, and chemical potentials. In comparison with previous simulation results, RISM and OPT agree in reproducing the progressive reduction of the gas-liquid phase separation as the anisotropy of the interaction potential becomes more pronounced; in particular, the RISM theory provides reasonable predictions for all coexistence curves, bar the strong anisotropy regime, whereas OPT performs generally less well. Both theories predict a linear dependence of the critical temperature on the interaction strength, reproducing in this way the mean-field behavior observed in simulations; the critical density~--~that drastically drops as the anisotropy increases~--~turns to be less accurate. Our results appear as a robust benchmark for further theoretical studies, in support to the simulation approach, of self-assembly in model colloidal systems.

AG-2015.05-1874

cond-mat.soft

Free energy of sheared colloidal glasses

M. T. Dang, V. Chikkadi, R. Zargar, D. M. Miedema, D. Bonn, A. Zaccone, P. Schall

We develop a free energy framework to describe the response of glasses to applied stress. Unlike crystals, for which the free energy increases quadratically with strain due to affine displacements, for glasses, the nonequilibrium free energy decreases due to complex interplay of non-affine displacements and dissipation. We measure this free energy directly in strained colloidal glasses, and use mean-field theory to relate it to affine and nonaffine displacements. Nonaffine displacements grow with applied shear due to shear-induced loss of structural connectivity. Our mean-field model allows for the first time to disentangle the complex contributions of affine and nonaffine displacements and dissipation in the transient deformation of glasses.

AG-2015.05-1705

cond-mat.soft

Understanding the movements of metal whiskers

Victor G. Karpov

Metal whiskers often grow across leads of electric equipment and electronic package causing current leakage or short circuits and raising significant reliability issues. The nature of metal whiskers remains a mystery after several decades of research. In addition, metal whiskers exhibit a rather unusual dynamic property of relatively high amplitude movements under gentle air flow or, according to some testimonies, without obvious stimuli. Understanding the physics behind that motion would give additional insights into the nature of metal whiskers. Here, we quantitatively analyze several possible mechanisms potentially responsible for the observed movements: (1) minute air currents, (2) Brownian motion due to random bombardments with the air molecules, (3) mechanically caused movements, such as (a) externally transmitted vibrations of the sample, and (b) torque exerted due to material propagation along curved whiskers responsible for the whisker growth (similar to the known garden hose oscillations), (4) time dependent electric fields due to diffusion of ions across the metal surface, and (5) nonequilibrium electric field configurations making it possible for {\it some} whiskers to move. For all these scenarios we provide numerical estimates. Our conclusion is that the observed movements are likely due to the minor air currents, intentional or ill-controlled, and that external mechanical vibrations could force such movements in a rather harsh environment or/and for whiskers with severe constrictions. We argue that under non-steady state conditions, such as caused by changes in the external light intensity, some whiskers can exercise spontaneous oscillations.

AG-2015.05-1900

cond-mat.soft

A Nonlinear Boundary Condition for Continuum Models of Biomolecular Electrostatics

J. P. Bardhan, D. A. Tejani, N. S. Wieckowski, A. Ramaswamy, M. G. Knepley

Understanding the behavior of biomolecules such as proteins requires understanding the critical influence of the surrounding fluid (solvent) environment--water with mobile salt ions such as sodium. Unfortunately, for many studies, fully atomistic simulations of biomolecules, surrounded by thousands of water molecules and ions are too computationally slow. Continuum solvent models based on macroscopic dielectric theory (e.g. the Poisson equation) are popular alternatives, but their simplicity fails to capture well-known phenomena of functional significance. For example, standard theories predict that electrostatic response is symmetric with respect to the sign of an atomic charge, even though response is in fact strongly asymmetric if the charge is near the biomolecule surface. In this work, we present an asymmetric continuum theory that captures the essential physical mechanism--the finite size of solvent atoms--using a nonlinear boundary condition (NLBC) at the dielectric interface between the biomolecule and solvent. Numerical calculations using boundary-integral methods demonstrate that the new NLBC model reproduces a wide range of results computed by more realistic, and expensive, all-atom molecular-dynamics (MD) simulations in explicit water. We discuss model extensions such as modeling dilute-electrolyte solvents with Debye-Huckel theory (the linearized Poisson-Boltzmann equation) and opportunities for the electromagnetics community to contribute to research in this important area of molecular nanoscience and engineering.

AG-2015.05-1690

cond-mat.soft

Hydrodynamics in bridging and aggregation of two colloidal particles in a near-critical binary mixture

Shunsuke Yabunaka, Ryuichi Okamoto, Akira Onuki

We investigate bridging and aggregation of two colloidal particles in a near-critical binary mixture when the fluid far from the particles is outside the coexistence (CX) curve and is rich in the component disfavored by the colloid surfaces. In such situations, the adsorption-induced interaction is enhanced, leading to bridging and aggregation of the particles. We realize bridging firstly by changing the temperature with a fixed interparticle separation and secondly by letting the two particles aggregate. The interparticle attractive force dramatically increases upon bridging. The dynamics is governed by hydrodynamic flow around the colloid surfaces. In aggregation, the adsorption layers move with the particles and squeezing occurs at narrow separation. We take into account the renormalization effect due to the critical fluctuations using the recent local functional theory [J. Chem. Phys. 136, 114704 (2012)].

AG-2015.05-1732

cond-mat.soft

Confetti Ordering by Polymer Brushes

Galen T. Pickett

I consider the ordering of dilute platelet additives when incorporated into an end-grafted polymer brush. The competition between wetting interactions and the anisotropic stress environment of the interior of the brush causes these platelet additives to either remain suspended at the outer edge of the brush laying flat against the brush surface (as bits of confetti at rest on the ground), or to invade the interior of the brush in which case the platelets stand end-on and in some cases protrude above the outer edge of the brush. The orientation of the additives is controlled by the ratio of the diameter of the additive to the thickness of the bare brush, as well as the ratio of solvent-monomer and solvent-platelet interactions.

AG-2015.05-1604

cond-mat.soft

Transition State Theory Approach to Polymer Escape from a One Dimensional Potential Well

Harri Mökkönen, Timo Ikonen, Tapio Ala-Nissila, Hannes Jónsson

The rate of escape of an ideal bead-spring polymer in a symmetric double-well potential is calculated using transition state theory (TST) and the results compared with direct dynamical simulations. The minimum energy path of the transitions becomes flat and the dynamics diffusive for long polymers making the Kramers-Langer estimate poor. However, TST with dynamical corrections based on short time trajectories started at the transition state gives rate constant estimates that agree within a factor of two with the molecular dynamics simulations over a wide range of bead coupling constants and polymer lengths. The computational effort required by the TST approach does not depend on the escape rate and is much smaller than that required by molecular dynamics simulations.

AG-2015.05-1715

cond-mat.soft

Entropic Trapping of Particles at Polymer Surfaces and Interfaces

Galen T. Pickett

I consider the possibility that Gaussian random walk statistics are sufficient to trap nanoscopic additives at either a polymer interface or surface. When an additive particle goes to the free surface, two portions of the polymer surface energy behave quite differently. The purely enthalpic contribution increases the overall free energy when the additive protrudes above the level of the polymer matrix. The entropic part of the surface energy arising from constraints that segments near a surface can't cross it, is partly relaxed when the additive moves to the free surface. These two portions of the polymer surface energy determine the equilibrium wetting angle formed between the additive and the polymer matrix, the measurement of which in an experiment would allow an independent determination of each piece of the polymer surface energy.

AG-2015.05-1463

cond-mat.soft

The "magic" angle in the self-assembly of colloids suspended in a nematic host phase

Sergej Schlotthauer, Tillmann Stieger, Michael Melle, Marco G. Mazza, Martin Schoen

Using extensive Monte Carlo (MC) simulations of colloids immersed in a nematic liquid crystal we compute an effective interaction potential via the local nematic director field and its associated order parameter. The effective potential consists of a local Landau-de Gennes (LdG) and a Frank elastic contribution. Molecular expressions for the LdG expansion coefficients are obtained via classical density functional theory (DFT). The DFT result for the LdG parameter $A$ is improved by locating the phase transition through finite-size scaling theory. We consider effective interactions between a pair of homogeneous colloids with Boojum defect topology. In particular, colloids attract each other if the angle between their center-of-mass distance vector and the far-field nematic director is about $30^{\circ}$ which settles a long-standing discrepancy between theory and experiment. Using the effective potential in two-dimensional MC simulations we show that self-assembled structures formed by the colloids are in excellent agreement with experimental data.

AG-2015.05-1472

cond-mat.soft

Lattice Boltzmann simulations on the role of channel structure for reactive capillary infiltration

Danilo Sergi, Loris Grossi, Tiziano Leidi, Alberto Ortona

It is widely recognized that the structure of porous media is of relevance for a variety of mechanical and physical phenomena. The focus of the present work is on capillarity, a pore-scale process occurring at the micron scale. We attempt to characterize the influence of pore shape for capillary infiltration by means of Lattice Boltzmann simulations in 2D with reactive boundaries leading to surface growth and ultimately to pore closure. The systems under investigation consist of single channels with different simplified morphologies: namely, periodic profiles with sinusoidal, step-shaped and zig-zag walls, as well as constrictions and expansions with rectangular, convex and concave steps. This is a useful way to decompose the complexity of typical porous media into basic structures. The simulations show that the minimum radius alone fails to characterize properly the infiltration dynamics. The structure of the channels emerge as the dominant property controlling the process. A factor responsible for this behavior is identified as being the occurrence of pinning of the contact line. It turns out that the optimal configuration for the pore structure arises from the packing of large particles with round shapes. In this case, the probability to have flow paths wide and straight is higher. Faceted surfaces presenting sharp edges should be avoided because of the phenomenon of pinning near narrow-to-wide parts. This study is motivated by the infiltration of molten metals into carbon preforms. This is a manufacturing technique for ceramic components devised to advanced applications. Guidelines for experimental work are discussed.

AG-2015.05-1548

cond-mat.soft

Transition in heterogeneous dynamics across the morphological hierarchy in two-dimensional aggregates

Tamoghna Das, T. Lookman, M. M. Bandi

Two-dimensional (2D) particulate aggregates formed due to competing interactions exhibit a range of non-equilibrium steady state morphologies from finite-size compact crystalline structures to non-compact string-like conformations. We report a transition in heterogeneous microscopic dynamics across this morphological hierarchy as a function of decreasing long-range repulsion relative to short-range attraction at a constant {\it low} density and temperature. Following a very slow cooling protocol to form steady state aggregates, we show that geometric frustration inherent to competing interactions assures non-ergodicity of the system, which in turn results in long-time sub diffusive relaxation of the same. Analysing individual particle trajectories generated by molecular dynamics, we identify {\it caging} dynamics of particles in compact clusters in contrast to the {\it bonding} scenario for non-compact ones. Finally, by monitoring temperature dependence, we present a generic relation between diffusivity and structural randomness of the aggregates, irrespective of their thermodynamic equilibrium.

AG-2015.05-1553

cond-mat.soft

Flow rate of polygonal grains through a bottleneck: Interplay between shape and size

Ezequiel Goldberg, C. Manuel Carlevaro, Luis A. Pugnaloni

We report two-dimensional simulations of circular and polygonal grains passing through an aperture at the bottom of a silo. The mass flow rate for regular polygons is lower than for disks as observed by other authors. We show that both the exit velocity of the grains and the packing fraction are lower for polygons, which leads to the reduced flow rate. We point out the importance of the criteria used to define when two objects of different shape are considered to be of the same size. Depending on this criteria, the mass flow rate may vary significantly for some polygons. Moreover, the particle flow rate is non-trivially related to a combination of mass flow rate, particle shape and particle size. For some polygons, the particle flow rate may be lower or higher than that of the corresponding disks depending on the size comparison criteria.

AG-2015.05-1444

cond-mat.soft

Rate-dependent elastic hysteresis during the peeling of Pressure Sensitive Adhesives

Richard Villey, Costantino Creton, Pierre-Philippe Cortet, Marie-Julie Dalbe, Thomas Jet, Baudouin Saintyves, Stéphane Santucci, Loïc Vanel, David Yarusso, Matteo Ciccotti

The modelling of the adherence energy during peeling of Pressure Sensitive Adhesives (PSA) has received much attention since the 1950's, uncovering several factors that aim at explaining their high adherence on most substrates, such as the softness and strong viscoelastic behaviour of the adhesive, the low thickness of the adhesive layer and its confinement by a rigid backing. The more recent investigation of adhesives by probe-tack methods also revealed the importance of cavitation and stringing mechanisms during debonding, underlining the influence of large deformations and of the related non-linear response of the material, which also intervenes during peeling. Although a global modelling of the complex coupling of all these ingredients remains a formidable issue, we report here some key experiments and modelling arguments that should constitute an important step forward. We first measure a non-trivial dependence of the adherence energy on the loading geometry, namely through the influence of the peeling angle, which is found to be separable from the peeling velocity dependence. This is the first time to our knowledge that such adherence energy dependence on the peeling angle is systematically investigated and unambiguously demonstrated. Secondly, we reveal an independent strong influence of the large strain rheology of the adhesives on the adherence energy. We complete both measurements with a microscopic investigation of the debonding region. We discuss existing modellings in light of these measurements and of recent soft material mechanics arguments, to show that the adherence energy during peeling of PSA should not be associated to the propagation of an interfacial stress singularity. The relevant deformation mechanisms are actually located over the whole adhesive thickness, and the adherence energy during peeling of PSA should rather be associated to the energy loss by viscous friction and by rate-dependent elastic hysteresis.

AG-2015.05-1457

cond-mat.soft

Role of Thermal Fluctuations in Nonlinear Thin Film Dewetting

S. Nesic, R. Cuerno, E. Moro, L. Kondic

The spontaneous formation of droplets via dewetting of a thin fluid film from a solid substrate allows for materials nanostructuring, under appropriate experimental control. While thermal fluctuations are expected to play a role in this process, their relevance has remained poorly understood, particularly during the nonlinear stages of evolution. Within a stochastic lubrication framework, we show that thermal noise speeds up and substantially influences the formation and evolution of the droplet arrangement. As compared with their deterministic counterparts, for a fixed spatial domain, stochastic systems feature a smaller number of droplets, with a larger variability in sizes and space distribution. Finally, we discuss the influence of stochasticity on droplet coarsening for very long times.

AG-2015.05-2552

cond-mat.soft

Explicit excluded volume of cylindrically symmetric convex bodies

Marco Piastra, Epifanio G. Virga

We represent explicitly the excluded volume Ve{B1,B2} of two generic cylindrically symmetric, convex rigid bodies, B1 and B2, in terms of a family of shape functionals evaluated separately on B1 and B2. We show that Ve{B1,B2} fails systematically to feature a dipolar component, thus making illusory the assignment of any shape dipole to a tapered body in this class. The method proposed here is applied to cones and validated by a shape-reconstruction algorithm. It is further applied to spheroids (ellipsoids of revolution), for which it shows how some analytic estimates already regarded as classics should indeed be emended.

AG-2015.05-1250

cond-mat.soft

Geometrically-tuned channel permeability

Paolo Malgaretti, Ignacio Pagonabarraga, J. Miguel Rubi

We characterize the motion of charged as well as neutral tracers, in an electrolyte embedded in a varying section channel. We exploit a set of systematic approximations that allows us to simplify the problem, yet capturing the essential of the interplay between the geometrical confinement provided by the corrugated channel walls and the electrolyte properties. Our simplified approach allows us to characterize the transport properties of corrugated channels when a net flux of tracers is obtained by keeping the extrema of the channel at different chemical potentials. For highly diluted tracer suspensions, we have characterized tracers currents and we have estimated the net electric current which occurs when both positively and negatively charged tracers are considered.

AG-2015.05-1306

cond-mat.soft

Artificial Rheotaxis

Jeremie Palacci, Stefano Sacanna, Anais Abrahmian, Jeremie Barral, Kasey Hanson, Alexander Y. Grosberg, David J. Pine, Paul M. Chaikin

Motility is a basic feature of living microorganisms, and how it works is often determined by environmental cues. Recent efforts have focused on develop- ing artificial systems that can mimic microorganisms, and in particular their self-propulsion. Here, we report on the design and characterization of syn- thetic self-propelled particles that migrate upstream, known as positive rheo- taxis. This phenomenon results from a purely physical mechanism involving the interplay between the polarity of the particles and their alignment by a viscous torque. We show quantitative agreement between experimental data and a simple model of an overdamped Brownian pendulum. The model no- tably predicts the existence of a stagnation point in a diverging flow. We take advantage of this property to demonstrate that our active particles can sense and predictably organize in an imposed flow. Our colloidal system represents an important step towards the realization of biomimetic micro-systems withthe ability to sense and respond to environmental changes

AG-2015.05-1078

cond-mat.soft

Motility-induced phase separation and coarsening in active matter

Giuseppe Gonnella, Davide Marenduzzo, Antonio Suma, Adriano Tiribocchi

Active systems, or active matter, are self-driven systems which live, or function, far from equilibrium - a paradigmatic example which we focus on here is provided by a suspension of self-motile particles. Active systems are far from equilibrium because their microscopic constituents constantly consume energy from the environment in order to do work, for instance to propel themselves. The nonequilibrium nature of active matter leads to a variety of non-trivial intriguing phenomena. An important one which has recently been the subject of intense interest among biological and soft matter physicists is that of the so-called "motility-induced phase separation", whereby self-propelled particles accumulate into clusters in the absence of any explicit attractive interactions between them. Here we review the physics of motility-induced phase separation, and discuss this phenomenon within the framework of the classic physics of phase separation and coarsening. We also discuss theories for bacterial colonies where coarsening may be arrested. Most of this work will focus on the case of run-and-tumble and active Brownian particles in the absence of solvent-mediated hydrodynamic interactions - we will briefly discuss at the end their role, which is not currently fully understood in this context.

AG-2015.05-1292

cond-mat.soft

Highly Efficient Hyperbranched CNT Surfactants: Influence of Molar Mass and Functionalization

Ellen Bertels, Kevin Bruyninckx, Mert Kurttepeli, Mario Smet, Sara Bals, Bart Goderis

End-group-functionalized hyperbranched polymers were synthesized to act as a carbon nanotube (CNT) surfactant in aqueous solutions. Variation of the percentage of triphenylmethyl (trityl) functionalization and of the molar mass of the hyperbranched polyglycerol (PG) core resulted in the highest measured surfactant efficiency for a 5000 g/mol PG with 5.6% of the available hydroxyl end-groups replaced by trityl functions, as shown by UV-vis measurements. Semiempirical model calculations suggest an even higher efficiency for PG5000 with 2.5% functionalization and maximal molecule specific efficiency in general at low degrees of functionalization. Addition of trityl groups increases the surfactant-nanotube interactions in comparison to unfunctionalized PG because of pi-pi stacking interactions. However, at higher functionalization degrees mutual interactions between trityl groups come into play, decreasing the surfactant efficiency, while lack of water solubility becomes an issue at very high functionalization degrees. Low molar mass surfactants are less efficient compared to higher molar mass species most likely because the higher bulkiness of the latter allows for a better CNT separation and stabilization. The most efficient surfactant studied allowed dispersing 2.85 mg of CNT in 20 mL with as little as 1 mg of surfactant. These dispersions, remaining stable for at least 2 months, were mainly composed of individual CNTs as revealed by electron microscopy.

AG-2015.05-1090

cond-mat.soft

Ultrafiltration modeling of non-ionic microgels

Rafael Roa, Emiliy K. Zholkovskiy, Gerhard Nägele

Membrane ultrafiltration (UF) is a pressure driven process allowing for the separation and enrichment of protein solutions and dispersions of nanosized microgel particles. The permeate flux and the near-membrane concentration-polarization (CP) layer in this process is determined by advective-diffusive dispersion transport and the interplay of applied and osmotic transmembrane pressure contributions. The UF performance is thus strongly dependent on the membrane properties, the hydrodynamic structure of the Brownian particles, their direct and hydrodynamic interactions, and the boundary conditions. We present a macroscopic description of cross-flow UF of non-ionic microgels modeled as solvent-permeable spheres. Our filtration model involves recently derived semi-analytic expressions for the concentration-dependent collective diffusion coefficient and viscosity of permeable particle dispersions [Riest et al., Soft Matter, 2015, 11, 2821]. These expressions have been well tested against computer simulation and experimental results. We analyze the CP layer properties and the permeate flux at different operating conditions and discuss various filtration process efficiency and cost indicators. Our results show that the proper specification of the concentration-dependent transport coefficients is important for reliable filtration process predictions. We also show that the solvent permeability of microgels is an essential ingredient to the UF modeling. The particle permeability lowers the particle concentration at the membrane surface, thus increasing the permeate flux.

AG-2015.05-1003

cond-mat.soft

Measurement theory of a density profile of small colloids around a large colloid: Superposition of the radial distribution functions

Ken-ichi Amano, Kota Hashimoto

We propose a transform theory for calculating a density profile of small colloids around a large colloid from a force curve between the two-large colloids. In the colloid solution, there are many small colloids and two or several large colloids. The force curve between the two-large colloids can be measured by laser tweezers. In this letter, the transform theory is derived in detail, where a superposition approximation of the radial distributions of the density profiles and rigid-body approximation are introduced. In our opinion, if the experimental condition is satisfied, the transform theory can be used not only for the laser tweezers, but also for surface force apparatus and colloid probe atomic force microscopy. Furthermore, the transform theory is to calculate a density profile of micelles around a large spherical surface.

AG-2015.05-2071

cond-mat.soft

Compaction of granular material inside confined geometries

Benjy Marks, Bjørnar Sandnes, Guillaume Dumazer, Jon Alm Eriksen, Knut Jørgen Måløy

In both nature and engineering, loosely packed granular materials are often compacted inside confined geometries. Here, we explore such behaviour in a quasi-two dimensional geometry, where parallel rigid walls provide the confinement. We use the discrete element method to investigate the stress distribution developed within the granular packing as a result of compaction due to the displacement of a rigid piston. We observe that the stress within the packing increases exponentially with the length of accumulated grains, and show an extension to current analytic models which fits the measured stress. The micromechanical behaviour is studied for a range of system parameters, and the limitations of existing analytic models are described. In particular, we show the smallest sized systems which can be treated using existing models. Additionally, the effects of increasing piston rate, and variations of the initial packing fraction, are described.

AG-2015.05-883

cond-mat.soft

Is the Kinetoplast DNA a Percolating Network of Linked Rings at its Critical Point?

Davide Michieletto, Davide Marenduzzo, Enzo Orlandini

In this work we present a computational study of the Kinetoplast genome, modelled as a large number of semiflexible unknotted loops, which are allowed to link with each other. As the DNA density increases, the systems shows a percolation transition between a gas of unlinked rings and a network of linked loops which spans the whole system. Close to the percolation transition, we find that the mean valency of the network, i.e. the average number of loops which are linked to any one loop, is around 3 as found experimentally for the Kinetoplast DNA. Even more importantly, by simulating the digestion of the network by a restriction enzyme, we show that the distribution of oligomers, i.e. structures formed by a few loops which remain linked after digestion, quantitatively matches experimental data obtained from gel electrophoresis, provided that the density is, once again, close to the percolation transition. With respect to previous work, our analysis builds on a reduced number of assumptions, yet can still fully explain the experimental data. Our findings suggest that the Kinetoplast DNA can be viewed as a network of linked loops positioned very close to the percolation transition, and we discuss the possible biological implications of this remarkable fact.

AG-2015.05-1027

cond-mat.soft

Stages of destruction and elastic compression of granular nanoporous carbon medium at high pressures

I. M. Neklyudov, O. P. Ledenyov, N. B. Bobrova, A. A. Chupikov

The granular nanoporous carbon medium, made of the cylindrical coal granules of the adsorbent of SKT 3, at an influence by the high pressures from 1MPa to 3GPa has been researched. The eight consecutive stages of the materials specific volume change, which is characterized by a certain dependence of the volume change on the pressure change, have been registered. It is shown that there is a linear dependence on the double log log plot of the materials specific volume change on the pressure for an every stage of considered process. The two stages are clearly distinguished such as a stage of materials mechanical destruction, and a stage of elastic compression of material without the disintegration of structure at a nanscale. The hysteresis dependence of the materials specific volume change on the pressure change at the pressure decrease is observed. The small disperse coal dust particles jettisoning between the high pressure cell and the base plate was observed, resulting in the elastic stress reduction in relation to the small disperse coal dust particles volume. The obtained research data can be used to improve the designs of air filters for the radioactive chemical elements absorption at the NPP with the aims to protect the environment.

AG-2015.05-2621

cond-mat.soft

Diffusion of a Janus nanoparticle in an explicit solvent: A molecular dynamics simulation study

Ali Kharazmi, Nikolai V. Priezjev

Molecular dynamics simulations are carried out to study the translational and rotational diffusion of a single Janus particle immersed in a dense Lennard-Jones fluid. We consider a spherical particle with two hemispheres of different wettability. The analysis of the particle dynamics is based on the time-dependent orientation tensor, particle displacement, as well as the translational and angular velocity autocorrelation functions. It was found that both translational and rotational diffusion coefficients increase with decreasing surface energy at the nonwetting hemisphere, provided that the wettability of the other hemisphere remains unchanged. We also observed that in contrast to homogeneous particles, the nonwetting hemisphere of the Janus particle tends to rotate in the direction of the displacement vector during the rotational relaxation time.

AG-2015.05-810

cond-mat.soft

Static dielectric properties of dense ionic fluids

Grigory Zarubin, Markus Bier

The static dielectric properties of dense ionic fluids, e.g., room temperature ionic liquids (RTILs) and inorganic fused salts, are investigated on different length scales by means of grandcanonical Monte Carlo simulations. A generally applicable scheme is developed which allows one to approximately decompose the electric susceptibility of dense ionic fluids into the orientation and the distortion polarization contribution. It is shown that at long range the well-known plasma-like perfect screening behavior occurs, which corresponds to a diverging distortion susceptibility, whereas at short range orientation polarization dominates, which coincides with that of a dipolar fluid of attached cation-anion pairs. This observation suggests that the recently debated interpretation of RTILs as dilute electrolyte solutions might not be simply a yes-no-question but it might depend on the considered length scale.

AG-2015.05-677

cond-mat.soft

A random matrix definition of the boson peak

M. Lisa Manning, Andrea J. Liu

The density of vibrational states for glasses and jammed solids exhibits universal features, including an excess of modes above the Debye prediction known as the boson peak located at a frequency $ω^*$ . We show that the eigenvector statistics for boson peak modes are universal, and develop a new definition of the boson peak based on this universality that displays the previously observed characteristic scaling $ω^*\sim p^{-1/2}$ . We identify a large new class of random matrices that obey a generalized global tranlational invariance constraint and demonstrate that members of this class also have a boson peak with precisely the same universal eigenvector statistics. We denote this class as boson peak random matrices, and conjecture it comprises a new universality class. We characterize the eigenvector statistics as a function of coordination number, and find that one member of this new class reproduces the scaling of $ω^{*}$ with coordination number that is observed near the jamming transition.

AG-2015.05-511

cond-mat.soft

Cooperative Motion of Active Brownian Spheres in Three-Dimensional Dense Suspensions

Adam Wysocki, Roland G. Winkler, Gerhard Gompper

The structural and dynamical properties of suspensions of self-propelled Brownian particles of spherical shape are investigated in three spatial dimensions. Our simulations reveal a phase separation into a dilute and a dense phase, above a certain density and strength of self-propulsion. The packing fraction of the dense phase approaches random close packing at high activity, yet the system remains fluid. Although no alignment mechanism exists in this model, we find long-lived cooperative motion of the particles in the dense regime. This behavior is probably due to an interface-induced sorting process. Spatial displacement correlation functions are nearly scale-free for systems with densities close to or above the glass transition density of passive systems.

AG-2015.05-541

cond-mat.soft

Non-monotonic flow curves of shear thickening suspensions

Romain Mari, Ryohei Seto, Jeffrey F. Morris, Morton M. Denn

The discontinuous shear thickening (DST) of dense suspensions is a remarkable phenomenon in which the viscosity can increase by several orders of magnitude at a critical shear rate. It has the appearance of a first order phase transition between two hypothetical "states" that we have recently identified as Stokes flows with lubricated or frictional contacts, respectively. Here we extend the analogy further by means of novel stress-controlled simulations and show the existence of a non-monotonic steady-state flow curve analogous to a non-monotonic equation of state. While we associate DST with an S-shaped flow curve, at volume fractions above the shear jamming transition the frictional state loses flowability and the flow curve reduces to an arch, permitting the system to flow only at small stresses. Whereas a thermodynamic transition leads to phase separation in the coexistence region, we observe a uniform shear flow all along the thickening transition. A stability analysis suggests that uniform shear may be mechanically stable for the small Reynolds numbers and system sizes in a rheometer.

AG-2015.05-550

cond-mat.soft

Curvature Capillary Migration of Microspheres

Nima Sharifi-Mood, Iris B. Liu, Kathleen J. Stebe

We address the question: How does capillarity propel microspheres along curvature gradients? For a particle on a fluid interface, there are two conditions that can apply at the three phase contact line: Either the contact line adopts an equilibrium contact angle, or it can be pinned by kinetic trapping, e.g. at chemical heterogeneities, asperities or other pinning sites on the particle surface. We formulate the curvature capillary energy for both scenarios for particles smaller than the capillary length and far from any pinning boundaries. The scale and range of the distortion made by the particle are set by the particle radius; we use singular perturbation methods to find the distortions and to rigorously evaluate the associated capillary energies. For particles with equilibrium contact angles, contrary to the literature, we find that the capillary energy is negligible, with the first contribution bounded to fourth order in the product of the particle radius and the deviatoric curvature. For pinned contact lines, we find curvature capillary energies that are finite, with a functional form investigated previously by us for disks and microcylinders on curved interfaces. In experiments, we show microsphere migrate along deterministic trajectories toward regions of maximum deviatoric curvature with curvature capillary energies ranging from $6 \times10^3 - 5 \times 10^4~k_BT$. These data agree with the curvature capillary energy for the case of pinned contact lines. The underlying physics of this migration is a coupling of the interface deviatoric curvature with the quadrupolar mode of nanometric disturbances in the interface owing to the particle's contact line undulations. This work is an example of the major implications of nanometric roughness and contact line pinning for colloidal dynamics.

AG-2015.05-2403

cond-mat.soft

Giant adsorption of microswimmers: duality of shape asymmetry and wall curvature

Adam Wysocki, Jens Elgeti, Gerhard Gompper

The effect of shape asymmetry of microswimmers on their adsorption capacity at confining channel walls is studied by a simple dumbbell model. For a shape polarity of a forward-swimming cone, like the stroke-averaged shape of a sperm, extremely long wall retention times are found, caused by a non-vanishing component of the propulsion force pointing steadily into the wall, which grows exponentially with the self-propulsion velocity and the shape asymmetry. A direct duality relation between shape asymmetry and wall curvature is proposed and verified. Our results are relevant for the design microswimmer with controlled wall-adhesion properties. In addition, we confirm that pressure in active systems is strongly sensitive to the details of the particle-wall interactions.

AG-2015.05-605

cond-mat.soft

Transport of active ellipsoidal particles in ratchet potentials

Bao-quan Ai, Jian-chun Wu

Rectified transport of active ellipsoidal particles is numerically investigated in a two-dimensional asymmetric potential. The out-of-equilibrium condition for the active particle is an intrinsic property, which can break thermodynamical equilibrium and induce the directed transport. It is found that the perfect sphere particle can facilitate the rectification, while the needlelike particle destroys the directed transport. There exist optimized values of the parameters (the self-propelled velocity, the torque acting on the body) at which the average velocity takes its maximal value. For the ellipsoidal particle with not large asymmetric parameter, the average velocity decreases with increasing the rotational diffusion rate, while for the needlelike particle (very large asymmetric parameter), the average velocity is a peaked function of the rotational diffusion rate. By introducing a finite load, particles with different shapes (or different self-propelled velocities) will move to the opposite directions, which is able to separate particles of different shapes (or different self-propelled velocities).

AG-2015.05-607

cond-mat.soft

Chirality separation of mixed chiral microswimmers in a periodic channel

Bao-quan Ai, Ya-feng He, Wei-rong Zhong

Dynamics and separation of mixed chiral microswimmers are numerically investigated in a channel with regular arrays of rigid half-circle obstacles. For zero shear flow, transport behaviors are the same for different chiral particles: the average velocity decreases with increase of the rotational diffusion coefficient, the direction of the transport can be reversed by tuning the angular velocity, and there exists an optimal value of the packing fraction at which the average velocity takes its maximal value. However, when the shear flow is considered, different chiral particles show different behaviors. By suitably tailoring parameters, particles with different chiralities can move in different directions and be separated. In addition, we also proposed a space separation method by introducing a constant load, where counterclockwise and clockwise particles stay in different regions of the channel.

AG-2015.05-611

cond-mat.soft

Elasticity of Interfacial Rafts of Hard Particles with Soft Shells

Sebastian Knoche, Jan Kierfeld

We study an elasticity model for compressed protein monolayers or particle rafts at a liquid interface. Based on the microscopic view of hard-core particles with soft shells, a bead-spring model is formulated and analyzed in terms of continuum elasticity theory. The theory can be applied, for example, to hydrophobin-coated air-water interfaces or, more generally, to liquid interfaces coated with an adsorbed monolayer of interacting hard-core particles. We derive constitutive relations for such particle rafts and describe the buckling of compressed planar liquid interfaces as well as their apparent Poisson ratio. We also use the constitutive relations to obtain shape equations for pendant or buoyant capsules attached to a capillary, and to compute deflated shapes of such capsules. A comparison with capsules obeying the usual Hookean elasticity (without hard cores) reveals that the hard cores trigger capsule wrinkling. Furthermore, it is shown that a shape analysis of deflated capsules with hard-core/soft-shell elasticity gives apparent elastic moduli which can be much higher than the original values if Hookean elasticity is assumed.

AG-2015.05-616

cond-mat.soft

Memory effects in tumbling nematics of 8CB liquid crystals

Balaji Yendeti, Ashok Vudaygiri

Particle tracking with a 0.98$μ$m silica sphere is used in determining precessional motion of nematic director in nematic phase of 8CB liquid crystals, as it probes those oriented structures which are of the same wavelength as of the sphere size. Velocity auto correlation(VACF) is used in determining those structures in both parallel and perpendicular orientations to the neamatic director. Further, a generic approach by considering the time dependent harmonic oscillator motions is used to analyze the VACF distribution function. This approach leads to observe a transition in the structures of nematic phase that are comparable to transformations from underdamped harmonic oscillator motion to critically damped motion. Also, we measured the microstructural properties and calculated micromechanical properties. The experimental analysis approach used here for 8CB liquid crystals helps to understand and characterize the general dynamic behavior of complex fluids. With this analysis, `dynamics of complex fluids' becomes no more `complex'.