Applied Physics

AG-2026.06-2097

physics.app-ph

Wide-field NV magnetometry under simultaneous high-pressure and high-temperature conditions

Masahiro Ohkuma, Eikichi Kimura, Shumpei Ohyama, Miu Tezuka, Ryo Matsumoto, Shinobu Onoda, Yoshihiko Takano, Shintaro Azuma, Kenji Ohta, Keigo Arai

We demonstrate wide-field optically detected magnetic resonance (ODMR) under simultaneous high-pressure and high-temperature conditions using nitrogen-vacancy (NV) centers. Although NV-center magnetometry has been widely used for spatially resolved magnetic-field imaging, its application to extreme environments combining pressure and temperature remains challenging. In this work, we show that ODMR can be observed at 5 GPa and 500 K, demonstrating the feasibility of NV spin readout under such combined extreme conditions. We further perform wide-field ODMR of iron at 7 GPa and 500 K, where the stray magnetic field from the sample is spatially visualized through the pressure cell. These results establish NV-center magnetometry as a promising platform for imaging magnetic phenomena in materials under high-pressure and high-temperature environments.

AG-2026.06-1432

physics.app-ph

Piezoelectric resonators in thin-film barium titanate from room temperature to millikelvin

Hao Tian, Shu-Yuan Chang, Nuha Akhtar, Kasra Sardashti, Mohammad Mirhosseini

Ferroelectric materials, with their strong nonlinearities, underpin key technologies across radio-frequency (RF) signal processing, optical communications, and emerging quantum systems. Barium titanate (BTO) is a notable example, combining strong piezoelectric and electro-optic responses. While bulk BTO has been studied for decades, the piezoelectric properties of its recently available thin films, and their behavior at the millikelvin temperatures relevant to quantum hardware, remain largely unexplored. Here, we fabricate and characterize surface acoustic wave (SAW) resonators on thin-film BTO. The measured devices exhibit high electromechanical coupling (k2eff 0.14 at 5.2 GHz) and operate up to 7.8 GHz. From these measurements, combined with finite-element modeling of the multi-domain microstructure, we extract an effective piezoelectric coefficient d33eff of 53 pC/N, comparable to bulk BTO. Exploiting the intrinsic ferroelectricity, we further demonstrate low-voltage switching with a fast (100 ns) response, attractive for reconfigurable RF front-ends and parametric amplifiers. Extending these measurements to millikelvin temperatures, we find that the piezoelectric response persists, with d33eff 19 pC/N, pointing to the potential of BTO for piezoelectric coupling in superconducting quantum circuits. These results position thin-film BTO as a promising piezoelectric platform for both classical and quantum information technologies.

AG-2026.06-1310

physics.app-ph

Coupled-Mode Equations with Arbitrary Mode Combinations for Kinetic-Inductance Superconducting Traveling-Wave Parametric Devices: Theory and Experimental Validation

F. Patricio Mena, Camilo Espinoza, Ryan O. Berriel, Ricardo Finger, David J. Thoen

The coupled-mode equations (CMEs) have proven very successful in describing parametric processes in nonlinear optics. More recently, the same formulation has been used to model microwave superconducting parametric amplifiers and frequency multipliers. However, when applied to the microwave regime, not all assumptions remain valid and losses play a more dramatic role. Here, we revisit the CMEs applied to traveling-wave superconducting amplifiers to include losses and provide a formulation that enables their systematic derivation for any combination of traveling waves. As examples, we discuss the impact of unwanted harmonics and intermodulation products on parametric amplification, as well as harmonic generation. We verify that, if not properly accounted for, device performance can deviate considerably from the ideal case. Furthermore, using a superconducting CPW-based artificial transmission line and combining an independent experimental determination of its nonlinear parameter $I'_*$ with simulations of its linear properties, we obtain a parameter-free validation of this formulation. The nonlinear parameter was determined to be $I'_* \approx 27$ mA which, surprisingly, scales with the theoretical depairing current and not with the much smaller critical current of the device. For the validation, we measured multiple-harmonic generation and found excellent agreement between theory and experiment. The fact that $I'_* \gg I_C$ has direct implications for device design.

AG-2026.04-1742

physics.app-ph

A unified quantum random walk model for internal crystal effects in dynamical diffraction

Owen Lailey, Dusan Sarenac, David G. Cory, Michael G. Huber, Dmitry A. Pushin

The theory of dynamical diffraction (DD) in perfect crystals is the backbone of high-precision neutron and X-ray diffraction experiments, enabling accurate determination of crystal structure factors and the realization of perfect crystal interferometers. In practice, however, real crystals exhibit deformations and imperfections, including surface roughness, defects, temperature gradients, angled crystal faces, and curvature, that degrade interferometer performance and are difficult to model using conventional DD theory, particularly in complex geometries. To address these challenges, a quantum information (QI) model for DD has been under development, with demonstrated experimental agreement for both ideal crystals and in the presence of some imperfections such as surface roughness and defects. Here, we present a unified quantum random walk model that is now suitable for reproducing all established DD effects. We demonstrate this by incorporating a broad range of internal crystal effects influencing DD intensity distributions, including linear temperature gradients, the DD Talbot effect, and angled or miscut crystals. These results establish the QI model as a comprehensive and flexible framework for experimental analysis, as well as for the design of next-generation perfect crystal neutron interferometers and neutron optical components, such as condensing monochromators.

AG-2026.04-1750

physics.app-ph

Quantum sensing-enabled deuterium NMR spectroscopy with nanoscale sensitivity at low magnetic fields

Dileep Singh, Riley W. Hooper, Christoph Findler, Utsab Banerjee, Dominik B. Bucher

Nuclear magnetic resonance (NMR) spectroscopy provides unparalleled access to molecular structure and dynamics but is traditionally limited by weak signal strength, requiring large sample volumes and high magnetic fields. Here, we demonstrate nanoscale deuterium (2H) NMR spectroscopy using nitrogen vacancy (NV) centers in diamond, reproducing the characteristic quadrupolar powder line shapes that are present in the conventional bulk NMR spectra. By detecting statistical spin fluctuations from nanometer scale detection volumes, our approach delivers a sensitivity enhancement of six to eight orders of magnitude over inductive detection while operating at magnetic fields two orders of magnitude lower than those used in conventional NMR. Temperature dependent measurements of a deuterated polymer and molecular solid reveal distinct motional averaging and phase transitions with nanoscale sensitivity. Powder-like NV detected 2H NMR establishes a powerful tool for probing molecular dynamics on the nanoscale and, in the ultimate limit, at the single molecule level - capabilities beyond those of most existing spectroscopic techniques.

AG-2025.10-473

physics.app-ph

Comparative Analysis of Thermal Models for Test Masses in Next-Generation Gravitational Wave Interferometers

Vincenzo Pierro, Vincenzo Fiumara, Guerino Avallone, Giovanni Carapella, Francesco Chiadini, Roberta De Simone, Rosalba Fittipaldi, Gerardo Iannone, Alessandro Magalotti, Enrico Silva, Veronica Granata

Accurate thermal modeling of Terminal Test Masses (TTMs) is crucial for optimizing the sensitivity of gravitational wave interferometers like Virgo. In fact, in such gravitational wave detectors even minimal laser power absorption can induce performance-limiting thermal effects. This paper presents a detailed investigation into the steady-state thermal behavior of TTMs. In particular, future scenarios of increased intracavity laser beam power and optical coating absorption are considered. We develop and compare two numerical models: a comprehensive model incorporating volumetric heat absorption in both the multilayer coating and the bulk substrate, and a simplified reduced model where the coating's thermal impact is represented as an effective surface boundary condition on the substrate. Our simulations were focused on a ternary coating design, which is a candidate for use in next-generation detectors. Results reveal that higher coating absorption localizes peak temperatures near the coating--vacuum interface. Importantly, the comparative analysis demonstrates that temperature predictions from the reduced model differ from the detailed model by only milli-Kelvins, a discrepancy often within the experimental uncertainties of the system's thermo-physical parameters. This finding suggests that computationally efficient reduced models can provide sufficiently accurate results for thermal management and first-order distortion analyses. Moreover, the critical role of accurately characterizing the total power absorbed by the coating is emphasized.

AG-2025.01-1143

physics.app-ph

Soft Error Rate in Space: A Unified Analytical Approach

G. I. Zebrev, N. N. Samotaev, R. G. Useinov, A. A. Mateiko, A. S. Rodin

A new physics-based model for analytical calculation of Soft Error Rate (SER) in digital memory circuits under the influence of heavy ions in space orbits is proposed. This method is based on parameters that are uniquely determined from the results of ground tests under nor-mal ion incidence. It is shown that preliminary averaging over the total solid angle within the standard inverse cosine model allows one to take into account the effect of isotropic flow, which increases the effective SER. The model includes the ability to estimate the contribution to SER of the low LET spectrum region, which is very important for modern ICs with low Single Event Upset tolerance.

AG-2024.07-2338

physics.app-ph

New design paradigm for highly efficient and low noise photodetector

Sagar Chowdhury, Rituraj, Srini Krishnamurthy, Vidya Praveen Bhallamudi

Achieving high quantum efficiency (QE) with low dark count is essential for highly sensitive photodetectors (PDs), including single photon avalanche detectors (SPADs). However, high QE requires a thicker absorber region, which leads to high dark current and noise, which in turn affects the detectivity of PDs and the photodetection efficiency and dark count of SPADs.The holy grail of photodetector and avalanche photodiode designs is to achieve highest QE with thinnest absorber and still enable large avalanche to gain as needed. We have developed a new design paradigm which exploits the coupling between dielectric Mie resonance and transverse propagating waves in thin layers. The Mie resonance launches the incident light at an angle in an ultrathin absorber, and when coupled to transverse waves, the light propagates laterally and is fully absorbed owing to the longer optical path. Consequently, with appropriate choice of materials for a chosen wavelength, a high absorption(~90%) within typically <100 nm absorber thickness is possible. For illustration, we apply our approach to design Si-based detector operating at 810 nm and InGaAs-based detector operating at 1550 nm and predict that the dark current at room temperature is reduced at least by two orders of magnitude. In addition, the lateral distances are often in a few microns and hence these designs can potentially enable avalanching for a large optical gain.

AG-2024.07-2217

physics.app-ph

Extending Radiowave Frequency Detection Range with Dressed States of Solid-State Spin Ensembles

Jens C. Hermann, Roberto Rizzato, Fleming Bruckmaier, Robin D. Allert, Aharon Blank, Dominik B. Bucher

Quantum sensors using solid-state spin defects excel in the detection of radiofrequency (RF) fields, serving various purposes in communication, ranging, and sensing. For this purpose, pulsed dynamical decoupling (PDD) protocols are typically applied, which enhance sensitivity to RF signals. However, these methods are limited to frequencies of a few megahertz, which poses a challenge for sensing higher frequencies. We introduce an alternative approach based on a continuous dynamical decoupling (CDD) scheme involving dressed states of nitrogen vacancy (NV) ensemble spins driven within a microwave resonator. We compare the CDD methods to established PDD protocols and demonstrate the detection of RF signals up to $\sim$ 85 MHz, about ten times the current limit imposed by the PDD approach under identical conditions. Implementing the CDD method in a heterodyne synchronized protocol combines the high frequency detection with high spectral resolution. This advancement extends to various domains requiring detection in the high frequency (HF) and very high frequency (VHF) ranges of the RF spectrum, including spin sensor-based magnetic resonance spectroscopy at high magnetic fields.

AG-2024.05-2179

physics.app-ph

Wafer-scale fabrication of evacuated alkali vapor cells

Yang Li, Donggyu B. Sohn, Matthew Hummon, Susan Schima, John Kitching

We describe a process for fabricating a wafer-scale array of alkali metal vapor cells with low residual gas pressure. We show that by etching long, thin channels between the cells on the Si wafer surface, the residual gas pressure in the evacuated vapor cell can be reduced to below 0.5 kPa (4 Torr) with a yield above 50 %. The low residual gas pressure in these mass-producible alkali vapor cells can enable a new generation of low-cost chip-scale atomic devices such as vapor cell optical clocks, wavelength references, and Rydberg sensors.

AG-2024.05-1685

physics.app-ph

Piezoelectric microresonators for sensitive spin detection

Cecile Skoryna Kline, Jorge Monroy-Ruz, Krishna C Balram

Piezoelectric microresonators are indispensable in wireless communications, and underpin radio frequency filtering in mobile phones. These devices are usually analyzed in the quasi-(electro)static regime with the magnetic field effectively ignored. On the other hand, at GHz frequencies and especially in piezoelectric devices exploiting strong dimensional confinement of acoustic fields, the surface magnetic fields ($B_{1}$) can be significant. This $B_1$ field, which oscillates at GHz frequencies, but is confined to $μ$m-scale wavelengths provides a natural route to efficiently interface with nanoscale spin systems. We show through scaling arguments that $B_1{\propto}f^2$ for tightly focused acoustic fields at a given operation frequency $f$. We demonstrate the existence of these surface magnetic fields in a proof-of-principle experiment by showing excess power absorption at the focus of a surface acoustic wave (SAW), when a polished Yttrium-Iron-Garnet (YIG) sphere is positioned in the evanescent field, and the magnon resonance is tuned across the SAW transmission. Finally, we outline the prospects for sensitive spin detection using small mode volume piezoelectric microresonators, including the feasibility of electrical detection of single spins at cryogenic temperatures.

AG-2024.04-2067

physics.app-ph

Microscale Fiber-Integrated Vector Magnetometer with On-Tip Field Biasing using NV Ensembles in Diamond Microcystals

Jonas Homrighausen, Frederik Hoffmann, Jens Pogorzelski, Peter Glösekötter, Markus Gregor

In quantum sensing of magnetic fields, ensembles of nitrogen-vacancy centers in diamond offer high sensitivity, high bandwidth and outstanding spatial resolution while operating in harsh environments. Moreover, the orientation of defect centers along four crystal axes forms an intrinsic coordinate system, enabling vector magnetometry within a single diamond crystal. While most vector magnetometers rely on a known bias magnetic field for full recovery of three-dimensional field information, employing external 3D Helmholtz coils or permanent magnets results in bulky, laboratory-bound setups, impeding miniaturization of the device. Here, a novel approach is presented that utilizes a fiber-integrated microscale coil at the fiber tip to generate a localized uniaxial magnetic field. The same fiber-tip coil is used in parallel for spin control by combining DC and microwave signals in a bias tee. To implement vector magnetometry using a uniaxial bias field, we preselect the orientation of the diamond crystal and then fully characterize it by rotating a static magnetic field in three planes of rotation. We demonstrate the measurement of vector magnetic fields in the full solid angle with a shot-noise limited sensitivity of $19.4\:\textrm{nT/Hz}^{1/2}$ and microscale spatial resolution while achieving a cross section of the fiber sensor head below $1\:\textrm{mm}^2.$

AG-2024.04-1813

physics.app-ph

Nonlinear Wave-Spin Interactions in Nitrogen-Vacancy Centers

Zhongqiang Hu, Qiuyuan Wang, Chung-Tao Chou, Justin T. Hou, Zhiping He, Luqiao Liu

Nonlinear phenomena represent one of the central topics in the study of wave-matter interactions and constitute the key blocks for various applications in optical communication, computing, sensing, and imaging. In this work, we show that by employing the interactions between microwave photons and electron spins of nitrogen-vacancy (NV) centers, one can realize a variety of nonlinear effects, ranging from the resonance at the sum or difference frequency of two or more waves to electromagnetically induced transparency from the interference between spin transitions. We further verify the phase coherence through two-photon Rabi-oscillation measurements. The highly sensitive, optically detected NV-center dynamics not only provides a platform for studying magnetically induced nonlinearities but also promises novel functionalities in quantum control and quantum sensing.

AG-2024.04-1651

physics.app-ph

Modelling magnetically-levitated superconducting ellipsoids, cylinders and cuboids for quantum magnetomechanics

Natanael Bort-Soldevila, Jaume Cunill-Subiranas, Nuria Del-Valle, Witlef Wieczorek, Gerard Higgins, Michael Trupke, Carles Navau

We theoretically investigate the properties of magnetically-levitated superconducting rotors confined in anti-Helmholtz traps, for application in magnetomechanical experiments. We study both the translational modes and a librational mode. The librational mode gives an additional degree of freedom that levitated spheres do not have access to. We compare rotors of different shapes: ellipsoids, cylinders and cuboids. We find that the stable orientations of the rotors depend on the rotors' aspect ratios.

AG-2024.03-2291

physics.app-ph

Low-loss liquid metal interconnects for superconducting quantum circuits

Zhancheng Yao, Martin Sandberg, David W. Abraham, David J. Bishop

Building a modular architecture with superconducting quantum computing chips is one of the means to achieve qubit scalability, allowing the screening, selection, replacement, and integration of individual qubit modules into large quantum systems. However, the nondestructive replacement of modules within a compact architecture remains a challenge. Liquid metals, specifically gallium alloys, can be alternatives to solid-state galvanic interconnects. This is motivated by their self-healing, self-aligning, and other desirable fluidic properties, potentially enabling the nondestructive replacement of modules at room temperatures, even after operating the entire system at millikelvin regimes. In this study, we present coplanar waveguide resonators (CPWRs) interconnected by gallium alloy droplets, achieving high internal quality factors up to nearly one million and demonstrating performance on par with the continuous solid-state CPWRs. Leveraging the desirable fluidic properties of gallium alloys at room temperature and their compact design, we envision a modular quantum system enabled by liquid metals.

AG-2024.03-1906

physics.app-ph

Spin dissymmetry in optical cavities

Priyanuj Bordoloi, Jefferson Dixon, Zachary N. Mauri, Christopher J. Ciccarino, Feng Pan, Tony Low, Felipe H. da Jornada, Jennifer A. Dionne

We introduce the spin dissymmetry factor, a measure of the spin-selectivity in the optical transition rate of quantum particles. This spin dissymmetry factor is valid locally, including at material interfaces and within optical cavities. We design and numerically demonstrate a metasurface optical cavity with three-fold rotational symmetry that maximizes spin dissymmetry, thereby maximizing the spin-selective radiative coupling of a cavity-coupled emitter. We also show the near-field and far-field response of spin and chiral dipoles to these cavities that preferentially enhance either spin or chirality. Our approach emphasizes the difference between spin and chirality in the near-field and reveals a compact parameter for designing more efficient quantum optical devices.

AG-2024.03-1857

physics.app-ph

Diamond Micro-Chip for Quantum Microscopy

Shahidul Asif, Hang Chen, Johannes Cremer, Shantam Ravan, Jeyson Tamara-Isaza, Saurabh Lamsal, Reza Ebadi, Yan Li, Ling-Jie Zhou, Cui-Zu Chang, John Q. Xiao, Amir Yacoby, Ronald L. Walsworth, Mark J. H. Ku

The nitrogen vacancy (NV) center in diamond is an increasingly popular quantum sensor for microscopy of electrical current, magnetization, and spins. However, efficient NV-sample integration with a robust, high-quality interface remains an outstanding challenge to realize scalable, high-throughput microscopy. In this work, we characterize a diamond micro-chip (DMC) containing a (111)-oriented NV ensemble; and demonstrate its utility for high-resolution quantum microscopy. We perform strain imaging of the DMC and find minimal detrimental strain variation across a field-of-view of tens of micrometer. We find good ensemble NV spin coherence and optical properties in the DMC, suitable for sensitive magnetometry. We then use the DMC to demonstrate wide-field microscopy of electrical current, and show that diffraction-limited quantum microscopy can be achieved. We also demonstrate the deterministic transfer of DMCs with multiple materials of interest for next-generation electronics and spintronics. Lastly, we develop a polymer-based technique for DMC placement. This work establishes the DMC's potential to expand the application of NV quantum microscopy in materials, device, geological, biomedical, and chemical sciences.

AG-2024.03-1458

physics.app-ph

Remote sensing of soil moisture using Rydberg atoms and satellite signals of opportunity

Darmindra Arumugam, Jun-Hee Park, Brook Feyissa, Jack Bush, Srinivas Prasad Mysore Nagaraja

Spaceborne radar remote sensing of the earth system is essential to study natural and man-made changes in the ecosystem, water and energy cycles, weather and air quality, sea level, and surface dynamics. A major challenge with current approaches is the lack of broad spectrum tunability due to narrow band microwave electronics, that limit systems to specific science variable retrievals. This results in a significant limitation in studying dynamic coupled earth system processes such as surface and subsurface hydrology, where broad spectrum radar remote sensing is needed to sense multiple variables simultaneously. Rydberg atomic sensors are highly sensitive broad-spectrum quantum detectors that can be dynamically tuned to cover micro-to-millimeter waves with no requirement for band-specific electronics. Rydberg atomic sensors can use existing transmitted signals such as navigation and communication satellites to enable remote sensing. We demonstrate remote sensing of soil moisture, an important earth system variable, via ground-based radar reflectometry with Rydberg atomic systems. To do this, we sensitize the atoms to XM satellite radio signals and use signal correlations to demonstrate use of these satellite signals for remote sensing of soil moisture. Our approach provides a step towards satellite-based broad-spectrum Rydberg atomic remote sensing.

AG-2024.02-2233

physics.app-ph

Miniaturized magnetic-field sensor based on nitrogen-vacancy centers

Stefan Johansson, Dennis Lönard, Isabel Cardoso Barbosa, Jonas Gutsche, Jonas Witzenrath, Artur Widera

The nitrogen-vacancy (NV) center in diamond is a prime candidate for quantum sensing technologies. Here, we present a fully integrated and mechanically robust fiber-based endoscopic sensor with a tip diameter of $1.25 \mathrm{mm}$. On its tip, a direct laser writing process is used to fixate a diamond containing NV centers above the fiber's core inside a polymer structure. Additionally, a metallic direct laser-written antenna structure next to the fiber facet allows efficient microwave manipulation of NV center spins. The sensor achieves a shot-noise-limited magnetic-field sensitivity of $5.9 \mathrm{nT}/\sqrt{\mathrm{Hz}}$ using a $15 \mathrm{μm}$-sized microdiamond at a microwave power of $50 \mathrm{mW}$ and optical power of $2.15 \mathrm{mW}$. Using lock-in techniques, we measure a sensitivity of $51.8 \mathrm{nT}/\sqrt{\mathrm{Hz}}$. Furthermore, we introduce a dual-fiber concept that enables, in combination with a direct laser-written structure, independent guiding of excitation and fluorescence light and thus reduces background autofluorescence. Moreover, controlled guiding of excitation light to the diamond while avoiding sample illumination may enable operation in light-sensitive environments such as biological tissue. While the demonstrated sensitivity is achieved using a single-fiber configuration, the dual-fiber approach provides a path towards integrating smaller diamonds, where autofluorescence would otherwise limit performance. We demonstrate the capability of vector magnetic field measurements in a magnetic field as used in state-of-the-art ultracold quantum gas experiments, opening a potential field in which high resolution and high sensitivity are necessary.

AG-2024.02-2142

physics.app-ph

Optical Widefield Nuclear Magnetic Resonance Microscopy

Karl D. Briegel, Nick R. von Grafenstein, Julia C. Draeger, Peter Blümler, Robin D. Allert, Dominik B. Bucher

Microscopy enables detailed visualization and understanding of minute structures or processes. While cameras have significantly advanced optical, infrared, and electron microscopy, imaging nuclear magnetic resonance (NMR) signals on a camera has remained elusive. Here, we employ nitrogen-vacancy (NV) centers in diamond as a quantum sensor, which converts NMR signals into optical signals that are subsequently captured by a high-speed camera. Unlike traditional magnetic resonance imaging (MRI), our method records the NMR signal over a wide field of view in real space. We demonstrate that our optical widefield NMR microscopy (OMRM) can image NMR signals in microfluidic structures with a $\sim 10\,μm$ resolution across a $\sim 235 \times 150\,μm^2$ area. Crucially, each camera pixel records an NMR spectrum providing multicomponent information about the signal's amplitude, phase, local magnetic field strengths, and gradients. The fusion of optical microscopy and NMR techniques enables multifaceted imaging applications in the physical and life sciences.

AG-2024.02-1778

physics.app-ph

Polariton-Based Room Temperature Quantum Phototransistors

Jhuma Dutta, Pooja Bhatt, Kuljeet Kaur, Daniel E. Gómez, Jino George

Strong light-matter coupling is a quantum process in which light and matter are coupled together, generating hybridized states. This is similar to the notion of molecular hybridization, but one of the components is light. Here, we utilized the idea and prepared quantum phototransistors using donor-acceptor combinations that can transfer energy via Rabi oscillations. As a prototype experiment, we used a cyanine J-aggregate (TDBC; donor) and MoS2 monolayer (acceptor) in a field effect transistor cavity and studied the photoresponsivity. The energy migrates through the newly formed polaritonic ladder, and the relative efficiency of the device is nearly seven-fold at the ON resonance. Further, the photon mixing fraction is calculated for each independent device and correlated with energy transfer efficiency. In the strongly coupled system, newly formed polaritonic states reshuffle the probability function. A theoretical model based on the time dependent Schrödinger equation is also used to interpret the results. Here, the entangled light-matter states act as a strong channel for funnelling the energy to the MoS2 monolayer, thereby boosting its ability to show the highest photoresponsivity at ON-resonance. These experimental findings and the proposed model suggest novel applications of strong light-matter coupling in quantum materials.

AG-2024.02-1714

physics.app-ph

An optically pumped magnetic gradiometer for the detection of human biomagnetism

Harry Cook, Yulia Bezsudnova, Lari M. Koponen, Ole Jensen, Giovanni Barontini, Anna U. Kowalczyk

We realise an intrinsic optically pumped magnetic gradiometer based on non-linear magneto-optical rotation. We show that our sensor can reach a gradiometric sensitivity of 18 $\text{fT}/\text{cm}/\sqrt{\text{Hz}}$ and can reject common mode homogeneous magnetic field noise with up to 30 dB attenuation. We demonstrate that our magnetic field gradiometer is sufficiently sensitive and resilient to be employed in biomagnetic applications. In particular, we are able to record the auditory evoked response of the human brain, and to perform real-time magnetocardiography in the presence of external magnetic field disturbances. Our gradiometer provides complementary capabilities in human biomagnetic sensing to optically pumped magnetometers, and opens new avenues in the detection of human biomagnetism.

AG-2024.02-1566

physics.app-ph

Left-handedness in the balanced/unbalanced resonance conditions of a quantized composite right-left handed transmission line

Xiao-Jing Wei, Shun-Cai Zhao

Left-handedness signifies negative permittivity ($\varepsilon_r$) and permeability ((μ_r)) in the same frequency band. The $\varepsilon_r$ and $μ_r$ are evaluated in a quantized composite right-left handed transmission line (CRLH-TL), and the frequency band for left-handedness is also valuated in the balanced resonance ($ L_r C_l = L_l C_r $) and unbalanced resonance($L_l C_r \neq L_r C_l$) cases in the displaced squeezed Fock state. The results show that the balanced resonance plays an important role in bandwidth and achieving for left-handedness. These displays some quantum mechanical behaviors and proposes a new potential approach to wider frequency band left-handedness for the quantized CRLH-TL.

AG-2024.02-1423

physics.app-ph

Reducing two-level system dissipations in 3D superconducting Niobium resonators by atomic layer deposition and high temperature heat treatment

Yasmine Kalboussi, Baptiste Delatte, Sarra Bira, Kassiogé Dembele, Xiaoyan Li, Frederic Miserque, Nathalie Brun, Michael Walls, Jean-luc Maurice, Diana Dragoe, Jocelyne Leroy, David Longuevergne, Aurélie Gentils, Stéphanie Jublot-Leclerc, Gregoire Julien, Fabien Eozenou, Matthieu Baudrier, Luc Maurice, Thomas Proslier

Superconducting qubits have arisen as a leading technology platform for quantum computing which is on the verge of revolutionizing the world's calculation capacities. Nonetheless, the fabrication of computationally reliable qubit circuits requires increasing the quantum coherence lifetimes, which are predominantly limited by the dissipations of two-level system (TLS) defects present in the thin superconducting film and the adjacent dielectric regions. In this paper, we demonstrate the reduction of two-level system losses in three-dimensional superconducting radio frequency (SRF) niobium resonators by atomic layer deposition (ALD) of a 10 nm aluminum oxide Al2O3 thin films followed by a high vacuum (HV) heat treatment at 650 °C for few hours. By probing the effect of several heat treatments on Al2O3-coated niobium samples by X-ray photoelectron spectroscopy (XPS) plus scanning and conventional high resolution transmission electron microscopy (STEM/HRTEM) coupled with electron energy loss spectroscopy (EELS) and (EDX) , we witness a dissolution of niobium native oxides and the modification of the Al2O3-Nb interface, which correlates with the enhancement of the quality factor at low fields of two 1.3 GHz niobium cavities coated with 10 nm of Al2O3.

AG-2024.02-1263

physics.app-ph

Ab-Initio Calculations of Nonlinear Susceptibility and Multi-Phonon Mixing Processes in a 2DEG-Piezoelectric Heterostructure

Eric Chatterjee, Alexander Wendt, Daniel Soh, Matt Eichenfield

Solid-state elastic-wave phonons are a promising platform for a wide range of quantum information applications. An outstanding challenge and enabling capability in harnessing phonons for quantum information processing is achieving strong nonlinear interactions between them. To this end, we propose a general architecture using piezoelectric-semiconductor heterostructures consisting of a piezoelectric acoustic material hosting phonon modes in direct proximity to a two-dimensional electron gas (2DEG). Each phonon in the piezoelectric material carries an electric field, which extends into the 2DEG. The fields induce polarization of 2DEG electrons, which in turn interact with other piezoelectric phononic electric fields. The net result is coupling between the various phonon modes. We derive, from first principles, the nonlinear phononic susceptibility of the system. We show that many nonlinear processes are strongly favored at high electron mobility, motivating the use of the 2DEG to mediate the nonlinearities. We derive in detail the first, second, and third-order susceptibilities and calculate them for the case of a lithium niobate surface acoustic wave interacting with a GaAs-AlGaAs heterostructure 2DEG. We show that, for this system, the strong third-order nonlinearity could enable single-phonon Kerr shift in an acoustic cavity that exceeds realistic cavity linewidths, potentially leading to a new class of acoustic qubit. We further show that the strong second-order nonlinearity could be used to produce a high-gain, traveling-wave parametric amplifier to amplify--and ultimately detect--the outputs of the acoustic cavity qubits. Assuming favorable losses in such a system, these capabilities, combined with the ability to efficiently transduce phonons from microwave electromagnetic fields in transmission lines, thus hold promise for creating all-acoustic quantum information processors.

AG-2024.01-2106

physics.app-ph

Photosynthetic properties assisted by the quantum entanglement in two adjacent pigment molecules

Lu-Xin Xu, Shun-Cai Zhao, Ling-Fang Li

The quantum dynamics of entanglement is widely revealed in photosynthetic light-harvesting complexes. Different from the previous work, we explore the properties of exciton transport and photosynthesis assisted by the quantum entanglement in two adjacent pigment molecules, which are measured by the population dynamics behaviors, the $j$-$V$ characteristics and by the output power via a photosynthetic quantum heat engine (QHE) model. A more robust exciton transport dynamic behavior is compared with those without quantum entanglement, and the photosynthetic characteristics evaluated by the output current and power were proved to be enhanced by the quantum entanglement at different ambient temperatures. These results may point toward the possibility for artificial photosynthetic nanostructures inspired by this quantum biological systems.

AG-2024.01-2008

physics.app-ph

On the Road with a Diamond Magnetometer

S. M. Graham, A. J. Newman, C. J. Stephen, A. M. Edmonds, D. J. Twitchen, M. L. Markham, G. W. Morley

Nitrogen vacancy centres in diamond can be used for vector magnetometry. In this work we present a portable vector diamond magnetometer. Its vector capability, combined with feedback control and robust structure enables operation on moving platforms. While placed on a trolley, magnetic mapping of a room is demonstrated and the magnetometer is also shown to be operational in a moving van with the measured magnetic field shifts for the x, y, and z axes being tagged with GPS coordinates. These magnetic field measurements are in agreement with measurements taken simultaneously with a fluxgate magnetometer.

AG-2024.01-1943

physics.app-ph

Dark excitons and hot electrons modulate exciton-photon strong coupling in metal-organic optical microcavities

Pavel V. Kolesnichenko, Manuel Hertzog, Felix Hainer, Oskar Kefer, Jana Zaumseil, Tiago Buckup

Polaritons, formed as a result of strong hybridization of matter with light, are promising for important applications including organic solar cells, optical logic gates, and qubits. Owing to large binding energies of Frenkel excitons (matter), strong matter-light coupling phenomena are possible at room temperature, high exciton densities, and even with low-quality-factor microcavities. In such cases, due to polaritons' high degree of delocalization, simultaneous effects from dark excitons and hot electrons may affect performance of potential devices. Their understanding, therefore, is of paramount importance, but their disentanglement in optical spectroscopy, however, thus far remained unattainable. Here, we overcome this challenge by careful and systematic analysis of transient polaritonic spectra, supported by analytical models. In doing so, we conclude that dark excitons affect the strength of exciton-photon coupling and manifest themselves as Fano-like polaritonic gain-loss spectra. Free electrons add additional loss component to and imprint a two-temperature dynamics on the polaritonic response. The developed general methodology can be applied to a variety of other microcavity structures. Our findings are significant for distinguishing polaritons and other excitations in studies of polariton-electron and plasmon-electron coupling phenomena as well as photonic control over photophysical and photochemical processes.

AG-2024.01-1919

physics.app-ph

Quantum Electrometer for Time-Resolved Material Science at the Atomic Lattice Scale

Gregor Pieplow, Cem Güney Torun, Charlotta Gurr, Joseph H. D. Munns, Franziska Marie Herrmann, Andreas Thies, Tommaso Pregnolato, Tim Schröder

The detection of individual charges plays a crucial role in fundamental material science and the advancement of classical and quantum high-performance technologies that operate with low noise. However, resolving charges at the lattice scale in a time-resolved manner has not been achieved so far. Here, we present the development of an electrometer with 60 ns acquisition steps, leveraging on the spectroscopy of an optically-active spin defect embedded in a solid-state material with a non-linear Stark response. By applying our approach to diamond, a widely used platform for quantum technology applications, we can distinguish the distinct charge traps at the lattice scale, quantify their impact on transport dynamics and noise generation, analyze relevant material properties, and develop strategies for material optimization.

AG-2024.01-1855

physics.app-ph

Wavelength dependence of nitrogen-vacancy center charge cycling

A. A. Wood, A. Lozovoi, R. M. Goldblatt, C. A. Meriles, A. M. Martin

Optically-active spin qubits in wide-bandgap semiconductors exist in several charge states, though typically only specific charge states exhibit desirable spin or photonic properties. An understanding of how interconversion between different charge states occurs is important for most applications seeking to employ such defects in quantum sensing and information processing, and additionally serves as a means of testing and verifying models of the defect electronic structure. Here, we use charge-sensitive confocal imaging to study the wavelength dependence of optical carrier generation in diamonds hosting nitrogen-vacancy (NV) centers, silicon vacancy (SiV) centers and substitutional nitrogen (N). We study the generation of distinctive charge-capture patterns formed when photogenerated charge carriers are captured by photoluminescent defects, using light spanning 405-633\,nm (1.96-3.06\,eV). We observe distinct regimes where one- or two-photon ionization or recombination processes dominate, and a third regime where anti-Stokes mediated recombination drives weak NV charge cycling with red light. We then compare red-induced charge cycling to fast charge carrier transport between isolated single NV centers driven with green and blue light. This work reports new optically-mediated charge cycling processes of the NV centers, and has consequences for schemes using charge transfer to identify non-luminescent defects and photoelectric detection, where ambiguity exists as to the source of photocurrent.

AG-2024.01-2339

physics.app-ph

Experimental investigation and scale analysis on melting of salty ice in a 3D-printed cavity filled with porous media

Xiaotian Liand Yuming Wang, Wei Yang, Wei Yao

While significant interests have been devoted to the double diffusive phase change heat transfer of binary solutions, the understanding on the melting heat transfer of salty ice in porous media is still imcomplete. This work aims to explore the melting heat transfer characteristics of salty ice in a square cavity filled with homogeneous porous media subjected to lateral heating. In order to facilitate the visualization of melting dynamics in a uniform porous media, a three-dimensional (3D) printed transparent cavity filled with porous matrix was manufactured, featuring an open upper end. Aqueous solutions of sodium chloride at concentration both higher and lower than the eutectic concentration were investigated. Lateral heating experiments with constant heat flux were conducted in a subzero temperature environment. The effect of heating power, initial concentrations and different sizes of porous matrix was investigated. Distinct phenomena were observed based on the concentration of the aqueous solution. Specifically, the concentration lower than the eutectic concentration results in an upward bending melting interface. Whereas the concentration surpassing the eutectic concentration resulted in a downward bending melting interface. In the presence of salt, a melting convex appears at the bottom of the melting interface and manifests during the whole melting process. Notably, smaller matrix enables faster melting rate. Furthermore, three distinct stages were revealed in our experiments, characterized as conduction, mixture of conduction and ultimately convection stage. The correlations for Nu and the average propagation rate of mushy/liquid interface were established by order of magnitude analysis and fit well with the experiments.

AG-2024.01-1595

physics.app-ph

Alternating Bias Assisted Annealing of Amorphous Oxide Tunnel Junctions

David P. Pappas, Mark Field, Cameron Kopas, Joel A. Howard, Xiqiao Wang, Ella Lachman, Lin Zhou, Jinsu Oh, Kameshwar Yadavalli, Eyob A. Sete, Andrew Bestwick, Matthew J. Kramer, Joshua Y. Mutus

We demonstrate a transformational technique for controllably tuning the electrical properties of fabricated thermally oxidized amorphous aluminum-oxide tunnel junctions. Using conventional test equipment to apply an alternating bias to a heated tunnel barrier, giant increases in the room temperature resistance, greater than 70%, can be achieved. The rate of resistance change is shown to be strongly temperature-dependent, and is independent of junction size in the sub-micron regime. In order to measure their tunneling properties at mK temperatures, we characterized transmon qubit junctions treated with this alternating-bias assisted annealing (ABAA) technique. The measured frequencies follow the Ambegaokar-Baratoff relation between the shifted resistance and critical current. Further, these studies show a reduction of junction-contributed loss on the order of $\approx 2 \times10^{-6}$, along with a significant reduction in resonant- and off-resonant-two level system defects when compared to untreated samples. Imaging with high-resolution TEM shows that the barrier is still predominantly amorphous with a more uniform distribution of aluminum coordination across the barrier relative to untreated junctions. This new approach is expected to be widely applicable to a broad range of devices that rely on amorphous aluminum oxide, as well as the many other metal-insulator-metal structures used in modern electronics.

AG-2024.01-2229

physics.app-ph

Time-resolved force microscopy using delay-time modulation method

Hiroyuki Mogi, Rin Wakabayashi, Shoji Yoshida, Yusuke Arashida, Atsushi Taninaka, Katsuya Iwaya, Takeshi Miura, Osamu Takeuchi, Hidemi Shigekawa

We developed a time-resolved force microscopy technique by integrating atomic force microscopy using a tuning-fork-type cantilever with the delay time modulation method for optical pump-probe light. We successfully measured the dynamics of surface recombination and diffusion of photoexcited carriers in bulk WSe2, which is challenging owing to the effect of tunneling current in time-resolved scanning tunneling microscopy. The obtained results were comprehensively explained with the model based on the dipole-dipole interaction induced by photo illumination.

AG-2024.01-2146

physics.app-ph

Cross-sectional profile of photocarrier mobility in thin film solar cell via nongeminate recombination and charge extraction by linearly increasing voltage (cs-p-CELIV)

Noah B. Stocek, Miguel J. Young, Reg Bauld, Tianhao Ouyang, Giovanni Fanchini

The ability to spatially resolve the carrier mobility profile along the cross section of micrometer-thin solar cells is vital both for fundamental studies in photovoltaics and as a quality control for reproducibly obtaining high conversion efficiencies in commercial solar cell modules. Presently, no technique capable of such an endeavor is available to the best of our knowledge. Here, we introduce a novel method capable of profiling the carrier mobility along the z-axis in thin-film photovoltaics. Our setup is based on the integration of photogenerated charge extraction by linearly increasing voltage (p-CELIV) with a scanning confocal optical microscope (SCOM) towards a cross-sectional sensitive p-CELIV (cs-p-CELIV) system. As geminate recombination of excess carriers is the most frequent radiative pathway for electrons and holes in solar cells at low power density of illumination, while nongeminate recombination dominates at high power, enhanced nongeminate recombination occurs at the SCOM focal plane. Thus, the cs-p-CELIV signal provides enhanced information on the mobility of all of the cross-sectional layers, except for the focal plane. By scanning the focal plane along the z-axis, the mobility profile can be derived. To demonstrate our technique, we use it to investigate the carrier mobility in a hydrogenated amorphous silicon (a-Si:H) solar cell. The mobility profile obtained by cs-p-CELIV correlates well with the H content profile, measured independently, and is in excellent agreement with models suggesting a critical role of Si-H bonding in locally determining the carrier mobility in a-Si:H.

AG-2024.01-1425

physics.app-ph

Design of Fully Integrated 45 nm CMOS System-on-Chip Receiver for Readout of Transmon Qubit

Ahmad Salmanogli, Amine Bermak

This study unveils a comprehensive design strategy, intricately addressing the realization of transmon qubits, the design of Josephson parametric amplifiers, and the development of an innovative fully integrated receiver dedicated to sensing ultra-low-level quantum signals. Quantum theory takes center stage, leveraging the Lindblad master and quantum Langevin equations to design the transmon qubit and Josephson parametric amplifier as open quantum systems. The mentioned quantum devices engineering integrated with the design of a fully integrated 45 nm CMOS system-on-chip receiver, weaves together a nuanced tapestry of quantum and classical elements. On one hand, for the transmon qubit and parametric amplifier operating at 10 mK, critical quantum metrics including entanglement, Stoke projector probabilities, and parametric amplifier gain are calculated. On the other hand, the resulting receiver is a symphony of high-performance elements, featuring a wide-band low-noise amplifier with a 0.8 dB noise figure and ~37 dB gains, a sweepable 5.0 GHz sinusoidal wave generator via the voltage-controlled oscillator, and a purpose-designed mixer achieving C-band to zero-IF conversion. Intermediate frequency amplifier, with a flat gain of around 26 dB, and their low-pass filters, generate a pure sinusoidal wave at zero-IF, ready for subsequent processing at room temperature. This design achieves an impressive balance, with low power consumption (~122 mW), a noise figure of ~0.9 dB, high gain (~130 dB), a wide bandwidth of 3.6 GHz, and compact dimensions (0.54*0.4 mm^2). The fully integrated receiver capability to read out at least 90 qubits positions this design for potential applications in quantum computing. Validation through post-simulations at room temperature underscores the promising and innovative nature of this design.