Fluid Dynamics

AG-2026.09-121

physics.flu-dyn

Dissipation scaling in wind turbine wakes exposed to free-stream turbulence

Martin Bourhis, Oliver R. H. Buxton

The nature of the dissipation of turbulent kinetic energy (TKE) is investigated experimentally in the wake of a diameter $D=0.58$m wind turbine exposed to several ``flavours'' of high-Reynolds-number free-stream turbulence (FST). For low- and moderate-intensity FST, an annular region of elevated normalised dissipation, $C_{\varepsilon}$, develops in the outer wake, coinciding with a ring of enhanced turbulence intermittency at both small ($\ell \leq λ$) and large ($\ell \geq D$) scales, where $λ$ is the Taylor microscale. In the blade-tip region, $C_{\varepsilon}$ scales with $\sqrt{Re_D}/Re_λ$, where $Re_D$ is a global Reynolds number and $Re_λ$ a local turbulent Reynolds number based on $λ$-a scaling indicative of dissipation being out of equilibrium with the inter-scale flux of TKE in the inertial range of the energy cascade. This non-equilibrium regime is interpreted in light of the observed intermittency : large-scale intermittent events (i.e., low-wavenumber perturbations/``kicks''), driven by persistent tip-vortex and tip-shear-layer dynamics under low-intensity FST, require a finite time to cascade down to the dissipative scales, thereby introducing an imbalance between the inter-scale energy flux and dissipation. At the wake centreline, by contrast, $C_{\varepsilon}$ remains approximately constant with streamwise distance, reflecting either classical Kolmogorov-type equilibrium turbulence or balanced non-equilibrium turbulence, with intermittency confined to the small scales. Under high-intensity FST, large-scale intermittency is suppressed, consistent with the erosion of tip-vortex structures, and no comparable scaling for $C_{\varepsilon}$ could be identified using a single turbulent Reynolds number for these cases, where two similarly intense streams of turbulence, but of different origins, are adjacent to one another.

AG-2026.09-122

physics.flu-dyn

Analytic study of the continuous spectrum of three-dimensional weak shock layers

Vassilis Theofilis

Three-dimensional linear stability of a weak, compressible shock layer is analyzed using exact Reynolds-number-independent forms of the governing base flow and linear stability equations, obtained by rescaling the problem onto the shock's own natural viscous length and time scales. For any base flow with zero transverse velocity components, depending on the shock-normal coordinate alone, the resulting eigenvalue problem is proved covariant under rotation of the transverse wavenumber vector: the eigenvalue depends on the transverse wavenumbers only through their magnitude, and every three-dimensional eigenmode, throughout the continuous spectrum, decouples exactly into two independent constituents. A two-dimensional, in-plane acoustic--entropy branch carries the disturbance's entire dilatation, pressure and thermodynamic coupling, and a one-dimensional, out-of-plane purely solenoidal vortical branch is governed by a single scalar shear-diffusion equation. Three-dimensional shock-layer stability is thus resolved exactly into its compressible and vortical constituents, confirmed to machine precision by the Grosch--Salwen far-field companion spectra. Both decoupled operators carry an explicit damping term growing with the total transverse wavenumber, so a three-dimensional, oblique disturbance is never less stable than the two-dimensional disturbance sharing its in-plane wavenumber alone; the vortical branch, whose spectrum is controlled directly by this term, is shown to retreat from the imaginary axis in close proportion to the wavenumber squared. This finding is an exact, Reynolds-free analogue of Squire's classical theorem, with the stabilizing role of Reynolds number played here by the transverse wavenumber magnitude.

AG-2026.09-123

physics.flu-dyn

How do flapping avian wing exhibit superior aerodynamic performance?

Dilip Thakur, Muhammad Saif Ullah Khalid

This work investigates the unsteady aerodynamic performance and vortex dynamics of avian-inspired flapping wings using our in-house sharp-interface immersed-boundary solver, VorteXdyn. A falcon-inspired body-wing model based on NACA 4312 profile is employed to examine aerodynamic force generation and vortex evolution during steady forward flapping flight at Reynolds numbers of 2,500, 5000, and 10000 and Strouhal numbers of 0.18, 0.225, and 0.27. The influence of physiologies is examined using three wing configurations: a simplified wing without distinct feather structures, a wing incorporating feather-like structures (serrations) along the trailing edge, and a geometrically detailed wing incorporating multiple feather layers consisting of primary, secondary, and median feathers over its span. The aerodynamic performance of these configurations is quantified using the temporal profiles and time-averaged characteristics of the lift and drag coefficients and the lift-to-drag ratio. The associated vortex dynamics are characterized through the formation and evolution of multiple leading-edge vortices (LEVs), their spanwise coherence, circulation, characteristic size, and persistence over the wings' surfaces. Particular emphasis is placed on the spanwise development of the LEVs from the root to the wingtip, their interactions with the tip vortices, and the resulting wake evolution during the downstroke. Our results demonstrate that increasing geometric fidelity modifies aerodynamic force production, the formation and evolution of multiple LEV structures, vortex-vortex and votex-wing interactions, and wake topology. These findings provide insight into the aerodynamic role of feather morphology in three-dimensional flapping flight for the aerodynamic design of efficient bio-inspired flapping-wing micro air vehicles.

AG-2026.09-124

physics.flu-dyn

Mach-number-dependent dissipative anomaly in isothermal compressible turbulence

Shadab Alam, Georgy Zinchenko, Christoph Federrath, Jörg Schumacher

Using a comprehensive set of three-dimensional, high-resolution direct numerical simulations, we investigate the existence of a dissipative anomaly in isothermal, homogeneous, isotropic compressible turbulence driven by solenoidal forcing. We find that the total kinetic-energy dissipation rate, as well as its solenoidal and dilatational components, approaches finite asymptotic values with increasing Reynolds number $Re$. The normalized mean dissipation rates collapse onto two distinct branches: one corresponding to the subsonic and transonic regimes, with root-mean-square Mach numbers ($M_{\rm rms}\lesssim 1$), and another to the highly supersonic regime, with ($M_{\rm rms}\ge 3$). This two-branch Mach-number dependence is most pronounced for the total kinetic-energy dissipation. For the solenoidal and dilatational dissipation rate components, the dependence on $Re$ depends in addition on the specific choice of the integral scale and root-mean-square velocity. Despite grid resolutions of up to $2048^3$ points the Reynolds numbers accessible are not sufficiently large to distinguish conclusively between a weak and a strong dissipative anomaly. We substantiate these findings using three complementary approaches: (i) a detailed analysis of the mechanisms responsible for dissipation generation, based on the corresponding dissipation-rate balance equations and their individual production terms; (ii) an investigation of precursors of anomalous dissipation using the Duchon--Robert framework extended to compressible flows; and (iii) a geometrical characterization of regions of intense dissipation. Taken together, these analyses provide consistent evidence for the existence of a dissipative anomaly in isothermal compressible turbulence, while leaving its precise weak or strong character unresolved.

AG-2026.09-126

physics.flu-dyn

A conservative coupling method of sharp-interface and multi-species model for compressible reacting gas-liquid flows with phase change

Jiaxi Song, Yunzhang Tian, Shucheng Pan

In this paper, a conservative sharp-interface and diffuse-interface coupling method is developed for compressible two-phase multi-species flows with phase change and chemical reactions. The liquid--gas interface is represented by a sharp-interface model, whereas a diffuse-interface model treats the transport and chemical reactions of gas-phase species. Conservation is enforced by coupling the two phases through interfacial fluxes obtained from a multi-species phase-change Riemann problem. The original single-species four-wave Riemann solver is extended to multi-species gas mixtures by modifying the interfacial energy jump condition. Interfacial mass transfer is restricted to the condensable vapor species. Accordingly, both the interfacial energy jump condition and the gas-mixture energy-exchange flux are constructed using the internal energy of the phase-changing vapor species rather than the mixture internal energy. With this species-selective energy coupling, an approximate multi-species Riemann solver is constructed that retains the four-wave structure while avoiding the multidimensional nonlinear root-finding required by the exact solution. A series of numerical tests, including impulsive evaporation and condensation, reacting aluminum vaporization, shock-droplet interaction, and detonation-droplet interaction, are performed to assess the accuracy and robustness of the method. The numerical results agree well with reference solutions and benchmark data, demonstrating that the present method resolves the effects of phase change and chemical reactions in compressible multi-species multiphase flows while preserving conservative interfacial coupling.

AG-2026.09-128

physics.flu-dyn

Interface-resolved simulations of boiling heat transfer

Alessio Roccon, Luca Brandt

Boiling heat transfer underpins many applications where large heat fluxes must be dissipated. Boiling is characterized by a wide range of coupled multiscale transport phenomena, making its accurate numerical prediction a long-standing challenge. In this context, interface-resolved simulation approaches - where the liquid-vapor interface is either explicitly or implicitly described - have undergone significant advancements, driven by improved numerical formulations, more complete thermodynamic and compressibility modeling, and the growing availability of computational resources. Here, we provide a comprehensive overview of the state of the art in interface-resolved simulations of boiling flows. We examine the different formulations governing the flow and temperature field, strategies for coupling heat and mass transfer at the interface, and current modeling approaches for small-scale physics such as nucleation, microlayer evaporation, and contact-line dynamics. By analyzing insights from recent high-fidelity simulations, a central observation is that interface-resolved simulations of boiling are hydrodynamically resolved but microscopically modeled: their predictive accuracy depends on the sub-grid closures for nucleation, microlayer, and contact-line physics no less than on the fidelity of the hydrodynamic solver. We discuss the strengths and limitations of available methods on this basis, together with the open challenges in the accurate description of boiling heat transfer.

AG-2026.09-129

physics.flu-dyn

Cascade coalescence dynamically sustains bubble retention near gas-evolving surfaces

Tao Wu, Bo Liu, Haohao Hao, Xuehua Zhang, Fang Yuan, Huanshu Tan, Qiang Yang

Bubble detachment from solid surfaces governs heat, mass, and charge transport across technologies vital to clean energy, including high-current-density water electrolysis and boiling thermal management. At high gas fluxes, however, bubbles remain trapped at active surfaces despite immense buoyancy, severely restricting mass transfer and increasing energy losses. Here, we show that this unexpected surface retention originates from cascade coalescence between unequal-sized bubbles. High-speed observations around microelectrodes demonstrate that when a rising bubble merges with a smaller surface-attached successor, its trajectory abruptly reverses, accelerating toward the substrate at nearly two orders of magnitude above its rising speed. Direct numerical simulations and scaling analysis reveal that asymmetric interfacial retraction during merging generates non-canceling viscous stresses, producing a net downward impulse toward the smaller bubble. Repeated cascade coalescence events accumulate these transient impulses into a steady, time-averaged retaining force capable of opposing buoyancy three to four orders of magnitude beyond quasistatic limits. Our findings establish bubble coalescence as a previously unrecognized mechanism that dynamically sustains bubble retention under high gas flux.

AG-2026.09-130

physics.flu-dyn

Finite-source filtering and Doppler modulation of infragravity waves generated by breakpoint forcing

Hedi Midouni, Stephanie Contardo, Jaak Monbaliu, Tomohiro Suzuki

Infragravity waves generated in the surf zone contribute substantially to nearshore water-level variability, with group-scale variations in wave breaking generating free long waves through breakpoint forcing. Existing interpretations of this mechanism rely largely on an idealised moving-breakpoint picture in which breaking is tied to a local saturation relation, leaving unresolved how the finite extent and evolution of a realistic breaking region control the radiated waves. We first derive a local decomposition of the wave-induced forcing into breakpoint and bound wave forcing, separating the two contributions within the same evolving short-wave field. We then describe the breakpoint-forcing field as a finite, evolving source through its integrated strength, centroid, cross-shore width, and shape. This representation shows that finite source extent produces spatial interference, as phase differences between contributions emitted from different positions attenuate the high-frequency part of the infragravity response and shift this attenuation toward lower frequencies as the source widens. Source migration produces a directional Doppler shift by modifying the arrival times of successive emissions, with shoreward motion compressing arrivals at a shoreward observer and stretching them at a seaward observer. Breaking depth controls both the conversion of this forcing into surface elevation and the celerities governing these propagation-time effects. Controlled numerical experiments across a range of plane-beach slopes reproduce the predicted signatures: broader source footprints strengthen upper-band attenuation on both branches. The diagnosed migration history, with breaking strongest during shoreward motion, partly offsets that attenuation shoreward and reinforces it seaward.

AG-2026.09-133

physics.flu-dyn

Mapping-based exact-integral formulation of skin-friction transformations for zero-pressure-gradient compressible turbulent boundary layers

Xuke Zhu, Xiaoshuo Yang, Yongchao Ji, Shiyi Chen, Zhenhua Xia

A long-standing route to efficient surface-drag prediction in zero-pressure-gradient compressible turbulent boundary layers is to map the skin-friction coefficient $C_f$ and momentum-thickness Reynolds number $Re_θ$ onto their `incompressible' counterparts. Reassessment against an extensive DNS database shows that existing formulations do not consistently recover the reference incompressible skin-friction behaviour, even when transformed data exhibit improved collapse. We define the mapped `incompressible' state as a constant-property counterpart of the physical compressible boundary layer and derive the transformation factors from prescribed mean-velocity and wall-normal-coordinate mappings. This definition-first approach links skin-friction scaling to the full-layer accuracy of the underlying velocity transformation and exposes inherited outer-layer errors. Van Driest's theory is recast in a finite-Re exact-integral form, with the classical vD I and II transformations recovered as leading-order asymptotic reductions. Their limitations at finite Reynolds numbers are quantified, and the historical success of vD II is traced to a fortuitous cancellation of truncation errors. The exact-integral formulation then yields modified transformations assessed through a priori scaling and standalone a posteriori prediction of $C_f$ from prescribed macroscopic and wall-thermal inputs. The VIPL-based modified transformation gives the best overall performance. Across $0.30 \leq M_\infty \leq 13.64$ and $-0.55 \leq \varTheta \leq 2.85$, its prediction errors remain below $11\%$, with a mean error of $3.07\%$. Overall, the analysis places skin-friction transformations on a mapping-based exact-integral footing, relating them directly to prescribed mean-flow mappings while avoiding the leading-order asymptotic truncations that limit classical van Driest theory at finite Reynolds numbers.

AG-2026.09-134

physics.flu-dyn

Vortex promoters in MHD duct flow

Andreu Queralt, Dmitry Krasnov, Yuri Kolesnikov, JörgSchumacher

We use 3D direct numerical simulations to study the effects of vortex promoters in liquid metal duct flow to sustain Q2D states which are formed in the presence of strong magnetic fields, such as those present in cooling blankets of fusion reactors. Both for electrically insulating and conducting walls. In case of insulating walls, disturbances are found to be sustained. For conducting walls, the disturbances may be extinguished immediately and replaced by a Walker- or Hunt-type flow with its own jet-detachment instability. Furthermore, we add heat transfer by imposing constant heat flux at the Shercliff walls. We classify and compare possible configurations with respect to their turbulent transport properties. For conducting ducts, no additional effect is observed. For insulating ducts in horizontal position, we observe a small effect. For vertical ducts, the buoyancy forces have a significant impact due to buoyancy-driven instabilities, which produce intermittent fluctuations. The analysis of the turbulent kinetic energy (TKE) and the Nusselt number show that flows with the largest TKE may not have the best heat transfer performance. This is caused by side jets removing heat faster than mixing the bulk flow. The buoyancy force and wall conductance ratio are found to play a key role in determining the flow structure. Part of our work is a parametric study at fixed Reynolds, Hartmann and Prandtl numbers, which allows us eventually to compose a phase diagram showcasing the different flow regimes.

AG-2026.09-135

physics.flu-dyn

Numerical Investigation of Mach 10 Kerosene-Fueled Oblique Detonation Waves at Different Flight Altitudes

Yunfeng Liu

The initiation and propagation mechanisms of kerosene-fueled oblique detonation waves are key issues in the development of oblique detonation wave engines. In this study, numerical simulations of kerosene-fueled oblique detonation at a flight Mach number of 10 were conducted using the two-dimensional conservative Euler equations and a second-order two-step global chemical reaction model. The objective was to compare wedge-induced initiation with bump-forced initiation. The results show that, at different flight altitudes, the oblique detonation flow field follows the \r{ho}L binary scaling law. Wedge-induced initiation requires highly precise matching of parameters such as the inlet-exit conditions, wedge angle and length, and equivalence ratio. In contrast, bump-forced initiation exploits the high total temperature and total pressure at the stagnation point and therefore does not require precise matching of these parameters. Therefore, the bump-forced initiation method provides reliable oblique detonation initiation and a stable oblique detonation flow field.

AG-2026.09-136

physics.flu-dyn

Improved uncertainty representation for reducing artificial energy production in structured input-output stability analysis

Ofek Frank-Shapir, Igal Gluzman

This work employs a new form of fixed structured uncertainty within the structured small-gain theorem approach proposed by Frank-Shapir & Gluzman (J. Fluid Mech., vol. 1030, 2026, pp A8) for the stability analysis of incompressible shear flows subject to finite-magnitude disturbances. Within this framework, the nonlinear advection term in the Navier-Stokes equations is replaced by a structured feedback uncertainty interconnection with the linearized dynamics to account for the impact of nonlinear feedback. Herein, a new uncertainty representation is derived via linear transformations of the input and output channels, transforming the feedback loop such that the resulting structured uncertainty has a repeated-diagonal structure. This structure aims to preserve the component-wise pathways of the nonlinear advection term while keeping the structured singular value computation tractable. We apply the method to two canonical base flows: Couette and plane Poiseuille flows. The resulting thresholds on disturbance magnitude to preserve stability are less conservative and more accurate. We compare the novel methodology presented here with previously proposed repeated and non-repeated block approximations of the uncertainty structure, where our stability threshold provided the closest agreement with previous numerical and experimental studies. We show that repeated and non-repeated block structures that were proposed in past studies result in an artificial energy-production term arising from using constant structured uncertainty in the structured input-output formulation, violating the divergencefree assumption. This energy-production term is smallest when using the methodology presented in this work, providing a more faithful representation of the impact of nonlinear feedback interconnection with the linearized dynamics of the Navier-Stokes system.

AG-2026.09-137

physics.flu-dyn

Mechanism-Resolved Interface Momentum Transfer in Immersed-Boundary Lattice Boltzmann Simulations

Hongju Jo

Immersed-boundary lattice Boltzmann (IB-LBM) simulations of cylinder and particle flows are usually compared by ranking boundary-enforcement schemes, kernels, and collision models. Such comparisons can obscure the mechanism that controls each response. Here, canonical fixed-cylinder, oscillating-cylinder, and sedimenting-particle cases are used as controlled probes of Eulerian-Lagrangian interface momentum transfer. For prescribed bodies, differences among direct forcing (DF), multi-direct forcing (MDF), and distribution-function correction (DFC) are most clearly discriminated by local no-slip fidelity rather than by a universal drag ranking. For DFC, the kernel-dependent drag-coefficient ranking reversal between the hat and Peskin 4-point kernels is associated with the spatial redistribution of the marker-resolved correction and the resulting near-boundary slip and pressure deviation, rather than the total correction magnitude alone. For sedimenting particles, single-particle settling provides a moving-body baseline, whereas two-particle differential-density wake-interaction sedimentation shows the wake-exposed light particle to be comparatively more sensitive to the explicit internal-mass correction in the force evaluation, a configuration-dependent, finite-window moving-boundary closure response. Targeted two-relaxation-time (TRT) and central-moment multiple-relaxation-time (CM-MRT) collision controls remain secondary to the boundary and closure mechanisms within the tested regimes (prescribed-body comparisons at Re <= 200, two-dimensional, and the reported moving-particle cases). The resulting picture replaces a universal scheme ranking with a mechanism-resolved interpretation of IB-LBM interface momentum transfer.

AG-2026.09-138

physics.flu-dyn

Ventilated Cavitation around a sphere through surface air injection at Re = 10,000

Soundararajan R, Anikesh Pal

We perform DNS of ventilated cavitation over a sphere at subcritical (Re=10,000). The flow is modeled as a homogeneous mixture of water and air, with the interface tracked using the volume-of-fluid method. Unlike previous numerical investigations, surface tension is explicitly included. Air is injected through a circular strip on the sphere at three locations selected based on the bulk flow dynamics: front (FR025, (18^\circ\leqθ\leq63^\circ)), mid (MD025, MD050, (75^\circ\leqθ\leq104^\circ)), and back (BK025, (120^\circ\leqθ\leq180^\circ)), with (C_q=0.2) and (0.4). The injection location strongly governs cavity inception and stability and alters flow separation in the front- and mid-injection cases. Front injection produces an unsteady bubbly cavity due to vigorous puffing, which fragments the injected air and increases drag by (\sim56%) relative to the single-phase case. In contrast, mid- and back-injection produce stable cavities with distinct leading-edge dynamics. In the mid-injection cases, puffing dominates and, despite delayed flow separation, the cavity detaches from the leading edge of the injection patch. For back injection, the cavity detaches upstream of the injection patch owing to the adverse pressure gradient induced by cavity formation. Kelvin--Helmholtz instabilities and divot formation characterize the back-injection cavity. Stable cavities exhibit strong air entrainment and close through a re-entrant jet. The mid-injection cases achieve (35%) and (25%) drag reduction at (C_q=0.2) and (0.4), respectively, while back injection yields a maximum drag reduction of (46%) relative to the single-phase case.

AG-2026.09-139

physics.flu-dyn

Bridging the local and the global: a physically constrained buoyancy--drag model for unified prediction of Rayleigh--Taylor and Richtmyer--Meshkov mixing widths across density ratios

You-Sheng Zhang, Ya-Feng Li, Meng-Juan Xiao, Yu-Hui Wang

Accurate prediction of the macroscopic width of Rayleigh--Taylor (RT) and Richtmyer--Meshkov (RM) turbulent mixing layers is central to inertial confinement fusion and supernova dynamics. However, bubble--spike asymmetry, density-ratio dependence and unsteady forcing pose a persistent closure challenge: existing low-order buoyancy--drag models struggle to describe different mixing problems accurately with one model and coefficient set. We combine local front dynamics with global mass conservation in separate buoyancy--drag equations for the bubble and spike fronts. Rather than imposing shared or fixed empirical coefficients, the model retains separate inertia, buoyancy and drag coefficients on the two sides and allows them to vary independently with density ratio. Given the bubble-side state scalings, RT/RM similarity relations, a mean-composition profile and endpoint asymptotics jointly constrain all six effective coefficients without case-by-case fitting. A profile-shape parameter $c$ labels distinct internal composition states and is selected a priori from RT spike scaling measured in linear-electric-motor experiments. The model then cross-predicts the RM spike exponent without recalibration to RM spike data and, by construction, recovers low-Atwood-number bubble--spike symmetry and the high-density-ratio free-fall RT-spike and ballistic RM-spike limits. Tests against constant- and variable-acceleration RT mixing, post-impulse RM evolution and Nova laser deceleration show that one closure describes mixing-width evolution across density ratios and acceleration histories without case-specific retuning, while reducing excessive spike growth at high density ratio. This physically interpretable, asymptotically consistent framework enables cross-problem prediction of wide-density-ratio RT and post-impulse RM mixing.

AG-2026.09-140

physics.flu-dyn

Reynolds-number evolution of wall-pressure statistics beneath canonical turbulent boundary layers

Rahul Deshpande, Balaraman Panneerselvam, Vijaya R. R. Gudla, Joe Klewicki, Ivan Marusic

This study investigates the Reynolds-number (Re_τ) evolution of wall-pressure statistics beneath zero-pressure-gradient TBLs, and links their logarithmic variation to the increasingly energetic large-scale motions in the logarithmic region. The wall-pressure skewness is found to become more negative with increasing Re_τ, owing to increasing contributions from large-scale wall-pressure fluctuations (that are negatively skewed) and their nonlinear interaction with the statistically invariant inner-scale fluctuations (that are positively skewed). The analysis draws on new, well-resolved simultaneous measurements of wall pressure and streamwise velocity spanning 5000 < Re_τ< 11300 in the Melbourne tunnel, atmospheric surface-layer measurements at Re_τ= O(10^6) and a published simulation dataset at Re_τ= O(10^3). Particular attention is paid to the principal experimental limitations affecting wall-pressure statistics: spatial resolution, Helmholtz resonance, facility noise and statistical convergence. Helmholtz resonance is shown to contaminate inner-scale wall-pressure contributions even after conventional corrections, and reliable estimation of skewness is found to require acquisition durations of O(10^5) eddy-turnover times or longer. The inner-scaled wall pressure spectrum is Reynolds-number invariant over the small-scale regime, in contrast to turbulent channel and pipe flows, whereas at intermediate and large scales it grows substantially with Re_τ, consistent with these internal flows. Linear and quadratic velocity--wall-pressure coherence link these intermediate- and large-scale contributions to two dynamically distinct coherent structures: the self-similar attached-eddy hierarchy and turbulent superstructures, respectively. These analyses establish the connection between the inertial region and the log variation of wall-pressure variance and skewness with Re_τ

AG-2026.08-3269

physics.flu-dyn

Numerical simulation of a two-frequency-driven superlattice Faraday-wave pattern

Debashis Panda, Nicolas Périnet, Abdullah M. Abdal, Lyes Kahouadji, Seungwon Shin, Jalel Chergui, Damir Juric, Omar K. Matar, Laurette S. Tuckerman

The formation of a superlattice pattern in two-frequency-driven Faraday waves discovered and named SSS-I by Arbell & Fineberg (1998, 2002) is investigated by means of Direct Numerical Simulations (DNS) of the full three-dimensional Navier--Stokes equations with a free surface. Two simulations with distinct quasi-hexagonal initial conditions run at a forcing amplitude $25\%$ above the Faraday-wave onset followed quite different routes, but both led eventually to the same superlattice pattern after around 250 forcing periods. This regime is inaccessible to the approximations of weak nonlinearity or viscosity. The standing-wave pattern contain rows of patches, alternating in time between hills and lakes that are connected by a long skeleton resembing the backbone of DNA strands. The patches and skeleton of the pattern can be related to its spatial Fourier decomposition, which combines hexagonal modes with a spatially and temporally subharmonic mode. One of the transition routes passes through several fairly long-lived transients including different hexagonal patterns and another superlattice pattern; the other passes only through erratic and disordered states. After another 100 periods, the pattern became unstable and was succeeded by a dynamic version of SSS-I in which the superlattice is modulated and drifts in the direction of the backbone, while preserving its basic shape. Convergence to SSS-I states both experimentally in a large geometry and numerically from two different initial conditions and in a minimal geometry demonstrates the robustness of the SSS-I pattern.

AG-2026.08-3271

physics.flu-dyn

A multiscale theory of convective momentum transport in the tropical atmosphere

Edward Goldsmith, Levi Dittman, Joseph Biello

A multiple-scales asymptotic framework is employed to analyze the interaction between a field of small-scale convective circulations and the large-scale tropical circulation. Closed equations governing the large-scale flow are derived, providing a systematic closure for the influence of unresolved convection. The influence of unresolved convection enters through a non-local momentum diffusion operator that provides a first-principles representation of convective momentum transport and naturally couples the vertical baroclinic modes of the large-scale circulation. The classical Matsuno--Gill model is recovered as a limiting approximation in which the derived momentum transport operator reduces to the phenomenological damping introduced by Gill, thereby placing the classical theory on a systematic first-principles foundation. Two applications of the generalized theory are considered. First, steady-state circulations driven by localized equatorially symmetric heating are examined. Convectively induced vertical-mode coupling is shown to excite additional baroclinic modes beyond those directly forced, substantially modifying the vertical structure of the Walker circulation. Second, the equatorial wave spectrum is analyzed. The resulting eigenmodes comprise mixtures of the classical equatorial wave families, causing the dispersion relations to lose their distinct branch structure and exhibit systematic frequency shifts. These results demonstrate how convectively induced momentum transport systematically modifies both steady tropical circulations and equatorial wave dynamics.

AG-2026.08-3272

physics.flu-dyn

Growth of helicity in salt-finger convection in the two-dimensional three-component limit

Smiron Varghese, Benjamin Miquel, Wouter Bos

We present an analytical investigation of the global helicity budget associated with the salt-fingering instability within the two-dimensional, three-component framework. Our analysis shows that in the region of parameter space corresponding to salt-fingering, helicity amplification occurs when the Rayleigh ratio--quantifying the relative strength of salinity to temperature gradients--exceeds a critical threshold. This finding provides a possible theoretical explanation for the spontaneous emergence of helicity, observed in recent numerical simulations.

AG-2026.08-3273

physics.flu-dyn

A neural network architecture and training algorithm to predict viscoelastic stresses from vortical data

Lu Zhu, Jacob Page

Numerical simulations of elastic turbulence in parallel shear flows of polymer solutions indicate that the phenomena is associated with the formation and instability of exact coherent states dominated by thin sheets of polymer stress. However, these ``arrowhead'' structures are yet to be seen directly in experiments, where simultaneous velocity and polymer conformation measurements are challenging to obtain. Motivated by these challenges, we introduce a method for the prediction of the polymer conformation field given a time series of vorticity measurements. Our approach consists of two components: the first is a convolutional neural network architecture which takes vorticity fields and outputs a positive definite conformation tensor. The second is the adaptation of an assimilation-based training algorithm (Zhu \& Page, 2026) which does not require a pre-generated `offline' library of reference conformation fields, but is trained only using the vorticity measurements. This is particularly important in viscoelastic problems, where the appropriate model and parameters to compare to the experiments may need to be determined as part of the solution. In training, measurements made on a time-marched network prediction are required to match the saved time series, while the output of the solver and network predictions at later times are required to be self-consistent. We apply these ideas to two-dimensional Kolmogorov flow in a range of regimes, from simple traveling waves to a fully chaotic state. In all cases, our method produces robust predictions of the polymer stretch, while standard, unregularised variational assimilation is ineffective. In the chaotic case we show that our networks generalise to much larger domains -- without further optimisation -- than the `minimal' units in which they were trained.

AG-2026.08-3274

physics.flu-dyn

Learning dynamically consistent flow reconstructions from limited observations

Lu Zhu, Jacob Page

A core inverse problem in the experimental sciences is the inference of a hidden dynamical state from sparse or indirect measurements. There is a natural opportunity for deep learning methods here, but machine-learnt reconstruction methods typically require full state data for training. We present Trajectory-Consistent Network Training (TraCTra), a label-free framework that trains reconstruction networks using only partial observation sequences and a differentiable forward model. TraCTra requires the network reconstruction and dynamical evolution to be mutually consistent: network-predicted states are marched forward in time to match subsequent observations and to agree in the full state space with independent reconstructions at later times. Across four fluid systems, the same objective reconstructs three-dimensional turbulence from coarse-grained fields, velocity from observations of density fluctuations, and three-dimensional density and velocity from sequences of projected two-dimensional shadowgraphs, while also recovering global vorticity from observations confined to a small spatial window. TraCTra outperforms assimilation-only and physics-informed neural approaches, preserves dynamically important multiscale structure, and remains accurate beyond the optimisation window. It transfers to held-out times in the three-dimensional shadowgraph problem and, when trained across trajectories, generalises to unseen flows in the two-dimensional problem. The results establish trajectory consistency as a general supervision principle for reconstructing hidden dynamical states without full state training targets.

AG-2026.08-3275

physics.flu-dyn

The Structure of Merging Turbulent Jets Beneath a Small Quadrotor

Anoop Kiran, Nora Ayanian, Kenneth Breuer

The downwash wake of a hovering quadrotor governs both the vehicle's own performance and the safe spacing of multi-rotor formations. Prior measurements have largely characterized the mean flow, using single-point anemometry, volumetric tracking, or planar cuts through part of the rotor system. Higher-order turbulent statistics of the merged wake, and how they relate to canonical jet scaling, have remained unresolved, particularly for small quadrotors at the low-Reynolds-number end of the size range. Here, we present a detailed particle image velocimetry (PIV) study of the downwash of a hovering Crazyflie 2.1 quadrotor (arm length, $l = 46$ mm), sampled along a diagonal cut, passing through rotors along the symmetry axis of the quadrotor, and a front-rotor cut, passing through adjacent rotors. The four rotor jets merge into a single column by $z/l \approx 5$, beyond which the mean velocity profiles progressively approach the canonical round-jet self-similar form, collapsing by $z/l \approx 13$ when scaled by the local centerline velocity and half-width. Centerline decay and half-width growth follow canonical scaling laws with an effective source diameter $D_\text{eff} = 2.29\,l$, effective Reynolds number $Re_{D_\text{eff}} = 3 \times 10^4$, at the low end of the range over which canonical jet scaling has been established, and spreading and decay constants nonetheless within the canonical round-jet range. Resolving both cuts shows that the turbulent normal stresses retain a bimodal, cut-dependent signature of the four-rotor source throughout the measurement domain.

AG-2026.08-3276

physics.flu-dyn

Real Schur Flow Acoustic Directivity and Helicity Effects within

Pan Xu, Jian-Zhou Zhu, Min Zhu

The statistical description and acoustic diagnostics of anisotropic turbulence remain challenging. Real Schur flows (RSFs), prototype models of component-wise dimensionally reduced flows (CWDRFs), provide effective platforms for studying such problems. We combine absolute statistical equilibrium with the acoustic analogy to investigate helicity effects on the far-field directivity of sound radiated from three types of CWDRFs: two different RSFs, and a further reduction of them (liberated Schur flow). We evaluate the directivity from the vortex-sound source spectrum which is calculated with the Wick theorem from the absolute equilibirum Gaussian ensemble. Helicity amplifies the dimensional reduction induced anisotropy of the directivity functions across all CWDRFs, with distinct patterns.

AG-2026.08-3277

physics.flu-dyn

Guided navigation in turbulence

Jingran Qiu, Kristian Gustavsson

Navigation in turbulence is challenging because local flow measurements provide limited information about favorable paths beyond the flow correlation scales. We investigate vertical navigation by swimmers in homogeneous isotropic turbulence and compare strategies using local flow information with strategies guided by high-performing trajectories. Compared with naive upward swimming, local strategies enhance the mean vertical velocity by about 10% of the root-mean-square flow velocity, while guidance by precalculated trajectories reaches enhancements of about 40%. This gain is limited by the time required to intercept favorable trajectories, particularly for slow swimmers. We then show that precalculated trajectories are unnecessary: swimmers can dynamically identify high-performing members of a swarm and use them as targets. For sufficiently fast swimmers, this collective strategy keeps much of the benefit of precalculated guidance using only the instantaneous swarm state. Our results demonstrate how distributed trajectory information can be used to overcome limitations of local sensing for navigation in turbulence.

AG-2026.08-3279

physics.flu-dyn

Evolution of inertial particle clustering in decaying turbulence

Martín Obligado, Sofía Angriman

Inertial particle dynamics in turbulence are commonly interpreted in terms of the instantaneous particle Stokes number, as supported by studies in statistically stationary homogeneous isotropic turbulence. But in freely decaying turbulence the Kolmogorov time scale evolves continuously, causing the effective Stokes number, St, to vary even though particle properties remain unchanged. Whether preferential concentration remains uniquely determined by this instantaneous St or depends on the flow's previous evolution has remained largely unexplored. We investigate inertial-particle clustering during the decay of homogeneous isotropic turbulence using direct numerical simulations of heavy point particles in the one-way coupling limit. Clustering is quantified through 3D Voronoï tessellations for populations evolving either from statistically stationary clustered states or initially random distributions. We consider both conventionally forced homogeneous isotropic turbulence and velocity fields reconstructed using physics-informed neural networks. We show that preferential concentration cannot be described solely by the instantaneous St. While particle slip velocity follows the classical steady-state dependence on the instantaneous St, clustering statistics retain a measurable history dependence throughout decay. Existing stationary scaling laws remain applicable to cluster-size evolution, but only through history-dependent prefactors. Particle distributions evolving from different initial conditions rapidly converge towards similar large-scale spatial organisation, indicating that the carrier flow determines the geometry of preferential concentration while finer clustering statistics preserve imprints of the previous evolution. These results demonstrate that preferential concentration in non-stationary turbulence is governed jointly by the instantaneous flow state and its initial state.

AG-2026.08-3280

physics.flu-dyn

Drag reduction and subcritical turbulence in controlled pipe flows

Emanuele Gallorini, Daniele Massaro, Philipp Schlatter, Maurizio Quadrio

Pipe flow controlled by streamwise-travelling waves of azimuthal wall velocity is studied using direct numerical simulations at a bulk Reynolds number $Re_b=4900$. A comprehensive analysis of drag reduction shows that the flow response differs fundamentally from that of channel flow. Under suitable forcing, pipe flow relaminarizes, whereas channel flow does not. Depending on the control parameters, the flow exhibits the spatially localized turbulent state characteristic of transitional pipe flow, with turbulent puffs persisting at bulk Reynolds numbers up to three times higher than in the uncontrolled case. The bulk Reynolds number alone does not determine the onset of localization. Moreover, drag reduction, which alters the natural relation between bulk and friction velocities, is insufficient to identify a universal onset criterion. An intermittency indicator based on the spatial variance of the cross-sectional turbulent kinetic energy relates the emergence of localized turbulence to the low wall friction produced by the control, although the correspondence is not one-to-one. Despite their qualitative resemblance to canonical turbulent puffs, the controlled puffs exhibit distinct properties; for example, their fronts may propagate faster than the bulk flow. Overall, this work provides a comprehensive characterization of the subcritical turbulent state and its turbulent puffs in controlled pipe flow, and offers a new perspective on control strategies that aim at flow relaminarization.

AG-2026.08-3281

physics.flu-dyn

A Physics-Informed, PIV-Based Method for Surface Pressure Reconstruction

Abbas Daliri, Fulvio Scarano

A physics-informed method for PIV-based surface pressure reconstruction that combines least-squares optimization with both local and global physical constraints is proposed. The standard deviation of the surface--normal pressure gradient is introduced as a physically meaningful weighting function in the optimization process. Moreover, a physical global constraint is also introduced to reconstruct surface pressure outside the suction region. The results show very good agreement with data obtained from pressure taps. Near the leading edge, the surface pressure reconstruction error has been reduced by one-third.

AG-2026.08-3282

physics.flu-dyn

Coexisting chaos and order in micro-textured elastic flows

Giulio Foggi Rota, Ricardo Arturo Lopez de la Cruz, Simon J. Haward, Amy Q. Shen, Marco Edoardo Rosti

Viscoelastic fluid flows over micro-textured surfaces - densely covered by slender protrusions like cilia lining the body airways or villi covering the intestinal epithelium - underpin essential biological processes including transport, mixing, and absorption. Despite their ubiquity, the dynamics generated by the interplay between fluid elasticity and these complex geometries remain largely unexplored. Here we combine fully resolved numerical simulations with microfluidic experiments to reveal the flow dynamics established above dense arrays of microscopic pillars (canopies) immersed in the low-Reynolds-number flow of a viscoelastic liquid. We observe that the flow above the canopy tips spontaneously develops elastic turbulence. Remarkably, the chaotic state coexists with elastic waves emerging from the coupling between fluid elasticity and the heterogeneous shear induced by the canopy geometry. These ordered fluid motions persist across a broad range of flow conditions and canopy configurations. Our results demonstrate that coherent wave propagation and elastic turbulence are complementary manifestations of viscoelastic fluid flow. Beyond their fundamental significance, these mechanisms have broad implications for transport in biological and engineered environments, and reveal how structured geometries can harness the spontaneous dynamics of viscoelastic liquids to manipulate complex flows.

AG-2026.08-3284

physics.flu-dyn

Solute dispersion in magnetically influenced multiphase flow through a porous tube: axial transport and microrotational effects

Sohel Ahmed, Nanda Poddar, Jyotirmoy Rana, Kajal Kumar Mondal, Niall Madden

This study presents a theoretical investigation of generalized solute dispersion in magnetohydrodynamic multiphase tube flow with porous layers. A two-fluid analytical model is developed for applications in biofluid and environmental fluid dynamics. The model comprises a micropolar (non-Newtonian) fluid core representing the rotational behaviour of red blood cells and a Newtonian plasma periphery embedded with Brinkman and Darcy porous structures, corresponding to the glycocalyx and endothelial layers with distinct permeability characteristics. A transverse magnetic field is incorporated to investigate how magnetic-field-induced modifications of the carrier flow influence solute localisation, with potential relevance to magnetic nanoparticle-mediated drug delivery. Using the generalised dispersion framework of Sankarasubramanian & Gill, analytical solutions are derived to investigate how the coupled axial velocity field and associated microrotational dynamics influence solute transport. The analytical predictions are independently validated through Brownian dynamics simulations, demonstrating excellent agreement for the temporal evolution of the zeroth and first transport moments. The results reveal the previously unexplored influence of microrotational dynamics on solute concentration, convection coefficients and effective dispersion, providing new insights into the coupled roles of translational and rotational fluid motion in biofluid transport. This work bridges an important gap in the literature and establishes a generalized theoretical framework linking magnetic fields, micropolar fluids and porous arterial structures for biofluid transport, targeted drug delivery and clinical engineering applications.

AG-2026.08-3285

physics.flu-dyn

Data-Driven Design Optimization of Streaming-Potential-Mediated Electrokinetic Transport of Viscoelastic Fluids in Microchannels

Ankan Basu, Sumanta Banerjee

Streaming-potential-mediated transport of viscoelastic fluids has attracted research attention owing to its applications in electrokinetic energy conversion and microfluidic transport. Existing analytical and semi-analytical models in published literature provide valuable physical insights, but require repeated numerical evaluations for exploring large design spaces and identifying the optimal operating conditions. In this work, a surrogate-assisted framework is developed for rapid design optimization of pressure-driven electrokinetic transport of simplified Phan-Thien-Tanner fluids in a slit microchannel. A high-fidelity numerical database is generated over a broad range of governing dimensionless parameters, which includes the zeta potential, the Debye parameter, the Dukhin number, and the viscoelastic parameter. A Machine Learning surrogate model is subsequently trained to accurately approximate the nonlinear relationship between the governing parameters and the streaming potential, while the volumetric flow rate and hydroelectric energy conversion efficiency were calculated from closed form equation by using the streaming potential predicted by the surrogate. This is coupled with a multi-objective optimization strategy to identify operating conditions that simultaneously maximize energy conversion efficiency and volumetric flow rate. The proposed methodology can significantly accelerate parametric exploration compared with repeated numerical simulations across different parameters and provides practical design guidelines for electrokinetic microfluidic devices. The study demonstrates the potential of combining computational fluid mechanics with data-driven surrogate modeling for efficient engineering design and optimization.

AG-2026.08-3286

physics.flu-dyn

Physics-Informed Kolmogorov-Arnold networks for viscoelastic fluid equations

Suryanshu Singh, Midhuna Suresh, Akanksha Gupta

Kolmogorov-Arnold Networks (KANs), inspired by the Kolmogorov Arnold representation theorem, provide an interpretable alternative to multilayer perceptrons (MLPs) by using learnable activation functions on edges rather than fixed node activations. We propose a Physics-Informed Kolmogorov-Arnold Network (PI-KAN) framework for solving forward problem of viscoelastic fluid equations, which arise in many complex fluid dynamics applications and are characterized by strong nonlinear coupling between fluid fields. For viscoelastic fluid equations, we adopt the generalized hydrodynamic model, which is well established in the field of dusty plasma. To evaluate the performance of the proposed framework for viscoelastic fluid, we consider benchmark problem based on the Taylor-Green (TG) flow and a modified Taylor-Green flow. We systematically investigate the effects of different network architectures, hyperparameters, and collocation point distributions on the accuracy and convergence behavior of PI-KANs for the range of viscoelastic parameter ($τ_m = 1$--$20$). We also study the impact of random seed initialization on training outcomes. The obtained results provide useful guidance for the design and implementation of physics-informed Kolmogorov-Arnold networks (PI-KANs) in solving viscoelastic fluid equations

AG-2026.08-3287

physics.flu-dyn

Splashing-regime transitions and secondary-droplet scaling in oblique drop impacts on a deep pool

Ying Xiong, Yang Zhang, Lingling Xie, Xiaolei Li

Oblique drop impact onto a deep liquid pool produces asymmetric crowns, directional jetting, and splashing transitions that cannot be characterized by the total impact inertia alone. We numerically investigate water drops impacting a quiescent deep pool over $41\leq We\leq1790$ and $10^\circ\leqθ\leq90^\circ$. The simulations reproduce the principal features observed experimentally and identify five post-impact regimes in the $We$--$θ$ plane: deposition, front splashing, side splashing, side-front splashing, and crown splashing. The deposition--front-splashing transition is described by the tangential-inertial parameter $K_s=We\cosθ$, with $K_s^c\approx120$. This criterion follows from the competition between downstream crown-rim inertia and capillary retraction at the Taylor--Culick velocity. The transition from front to side-front splashing is instead governed primarily by normal impact inertia, with a critical normal Weber number $We_N^c\approx318$. Beyond these regime transitions, the secondary-droplet statistics reveal fragmentation behavior common to the different splashing regimes. The droplet-size distributions are positively skewed, and the median diameter follows $d_{s,\mathrm{med}}/D\sim We^{-3/5}$. Second-order velocity structure functions support a scale-dependent capillary--inertial description of rim and ligament breakup. Combined with mass conservation, this scaling gives $N_s\sim We^{9/5}$, providing a numerical explanation for the secondary-droplet-number scaling observed experimentally. Thus, directional impact inertia governs the macroscopic selection of splashing regimes, whereas the secondary-droplet populations across these regimes exhibit a common capillary--inertial fragmentation scaling.

AG-2026.08-3288

physics.flu-dyn

Lagrangian particles and particle clusters in large-aspect-ratio turbulent Rayleigh-Bénard convection experiment

Prafulla P. Shevkar, Mitanjali, Roshan J. Samuel, Christian Cierpka, Jörg Schumacher

We perform Lagrangian particle-tracking experiments in turbulent Rayleigh-Bénard convection at aspect ratio Gamma = 10, Rayleigh number Ra = 9.3 x 10^7, and Prandtl number Pr = 4.8. Approximately 50,000 neutrally buoyant particles are tracked for durations of up to 150 Kolmogorov times. The resulting trajectories are sufficiently long to capture the mean-square displacement of single particles from the short-time ballistic regime to the long-time diffusive regime. We further analyse Lagrangian velocity structure functions and particle-pair dispersion, both of which exhibit scaling behavior consistent with theoretical expectations in their respective temporal regimes. In the Richardson-like regime, the pair-dispersion exponent exceeds 3, most clearly in the lateral direction. Multi-particle statistics are investigated by analysing particle clouds with initial radii of approximately 8 and 20 Kolmogorov lengths using principal component analysis. The clouds spread more strongly in the lateral directions than in the vertical direction and deform from initially spherical shapes into oblate ellipsoids within approximately 10 Kolmogorov times, revealing pronounced anisotropic dispersion. The dynamics is identified from the particle-connectivity network through a spectral analysis of the graph Laplacian followed by k-means clustering. Furthermore, we examine the probability density functions of all three acceleration components and assess the statistical convergence of their second and fourth moments. The lateral acceleration components are more intermittent than the vertical component, as indicated by their heavier tails. Acceleration statistics conditioned on the bulk region are slightly less intermittent than those obtained over the full measurement volume, which we attribute to the highly intermittent plume-ejection and plume-aggregation events occurring near the walls.

AG-2026.08-3289

physics.flu-dyn

Competing instabilities in wide-gap viscoelastic Taylor-Couette flow: Taylor vs. helical vortices

Alexander Proskurin

This paper presents a numerical study of the stability of a polymer solution flow between concentric cylinders with a rotating inner cylinder. The case of a small-radius inner cylinder is considered. The fluid motion is described using a specific case of the Kelvin-Voigt model, often referred to as the Oskolkov model. This model is applicable to very dilute polymer solutions, where the retardation time is much smaller than the characteristic time of the problem and elastic forces are much smaller than viscous forces. The stability of the steady-state motion is investigated using a fully nonlinear approach by means of direct numerical simulation of a perturbation introduced as finite-duration white noise. Depending on the Reynolds number, the perturbation either decays or grows. The critical Reynolds numbers obtained for both Newtonian and non-Newtonian fluids are found to be in agreement with the predictions of the linear theory. It is also shown that an increase in the elastic forces makes helical perturbations more dangerous than their axisymmetric counterparts.

AG-2026.08-3037

physics.flu-dyn

High-order stabilized matrix-free simulation of rotating mixing devices using the Mortar Element Method

B. Campos, P. Munch, V. O. Ferreira, D. C. Boffito, X. Banquy, B. Blais

We present a finite element framework to simulate rotating mixing devices using the Mortar Element Method as a domain decomposition strategy. The model is implemented within a matrix-free Navier-Stokes framework which uses a high-order Continuous Galerkin method. The discretized domain is subdivided into rotor and stator parts. An Arbitrary Lagrangian-Eulerian approach accounts for the relative rotor-stator motion, and stabilization is ensured through the Streamline-Upwind/Petrov-Galerkin and Pressure-Stabilizing Petrov-Galerkin methods. The rotor-stator domains are connected by an interface composed of mortar cells, and continuity is weakly enforced in a Discontinuous Galerkin fashion by accounting for boundary integrals at the rotor-stator interface. Verifications of the convergence order in two-dimensional steady and transient examples report optimal rates. The geometric non-conformity created at the mortar interface due to rotor rotation does not introduce significant error in the solution. A three-dimensional example is used to investigate the model's scalability, which yields ideal strong scaling for large problems. A two-dimensional Rushton impeller example uses a torque analysis to showcase the mesh convergence, and the corresponding velocity profile is in agreement with existing numerical results. In a three-dimensional pitched blade turbine case, the power number curve (Np vs Re) shows good agreement with experimental data for Reynolds number values from 1 to 2000. An energy balance analysis reports a numerical dissipation of 1% for Re=200 and of 10% for Re=2000. By exploiting modern hardware capabilities through matrix-free methods, the proposed model is a robust, accurate, and efficient framework suitable for simulating flows with rotating geometries.

AG-2026.08-3038

physics.flu-dyn

How well can Diffusion Models learn Lagrangian-Tracer Statistics in Non-reciprocal Turbulence?

Pratyush Jha, Biswajit Maji, Rahul Pandit

Recent advances in generative artificial intelligence have led to significant potential applications in conventional fluid flows, including those that are turbulent. Can these methods be carried over to studies of novel types of turbulence, such as turbulence induced by non-reciprocity in binary-fluid systems? To answer this question, we analyze the statistics of Lagrangian-tracer particles in non-reciprocal binary-fluid turbulence, which has been studied recently in the non-reciprocal Cahn-Hilliard-Navier-Stokes (NRCHNS). We obtain our ground-truth data via extensive pseudospectral direct numerical simulations (DNSs) of the two-dimensionsl (2D) NRCHNS model. Our study yields a variety of intriguing results for probability distribution functions (PDFs) for particle accelerations and velocity-component PDFs; the latter turn out to be bimodal, completely unlike their 2D-fluid-turbulence counterparts. We relate this bimodality to lane-type structures in Eulerian-velocity components. Furthermore, we characterize Lagrangian multiscaling via Lagrangian velocity increments, their structure functions and flatnesses, and multiscaling exponent ratios, for the first time in non-reciprocal hydrodynamics. Finally, we use generative diffusion models to obtain synthetic Lagrangian trajectories for the NRCHNS system, assess how effectively they can emulate the Lagrangian statistics that we obtain from our DNSs, and highlight open challenges in the application of generative artificial intelligence in non-reciprocal systems.

AG-2026.08-3039

physics.flu-dyn

Dynamical slowdown, bottlenecks, and multiscaling in Voigt-regularised turbulence

Anikat Kankaria, Bikram Pal, Edriss S. Titi, Samriddhi Sankar Ray

We investigate bottleneck formation in turbulence using the Voigt-regularised SABRA model and DNS of the corresponding Voigt-Navier-Stokes (NSV) equations. The Voigt regularisation introduces a scale-dependent slowdown of nonlinear interactions without enhancing dissipation, providing a natural setting to study the interplay between nonlinear transfer and thermalised behaviour. We find three distinct spectral regimes: an inertial range at $k<k_I$, an intermediate equilibrium-like range associated with partial thermalisation for $k_I<k<k_{II}$, and a high-$k$ thermal regime for $k>k_{II}$, where the Voigt contribution dominates the conserved invariant. The crossover to the high-$k$ regime occurs at $k_{II}\sim 1/α$, while $k_I$ marks the onset of thermalised behaviour. Equal and multi-time statistics reveal a progressive suppression of intermittency and a tendency towards Gaussianity at small scales, together with a transition from dynamic multiscaling in the turbulent regime to simple scaling in the equilibrium ranges. The shell model resolves these three regimes over a broad range of scales, while DNS of the corresponding NSV equations reproduces the same qualitative trends, including bottleneck formation, delayed cascade completion, reduced intermittency, and a tendency towards Gaussianity at small scales. We find that bottleneck formation might be associated with scale-dependent dynamical slowdown and incipient thermalisation, rather than being purely dissipative in origin. We provide strong evidence that, in the regime where the regularization parameter $α$ is much smaller than the dissipation length scale, the Voigt model reproduces the same inertial-range turbulent regime and turbulence statistics as the Navier-Stokes (NS) equations. This provides evidence that the Voigt model constitutes an excellent practical approximation to the NS equations for small $α$.

AG-2026.08-3040

physics.flu-dyn

Energy transfer and scale organisation in dense canopy turbulence

Riccardo Bertoncello, Alessandro Chiarini, Giulio Foggi Rota, Maurizio Quadrio, Marco Edoardo Rosti

This study identifies the scale-dependent processes that sustain turbulence in dense submerged canopy flows. Using a scale-resolved energy budget, we determine where in space and at which scales production, pressure-strain redistribution, and inter-scale transfer predominantly occur, and how they link the canopy layer to the overlying shear flow. We show that energy production is localised at the interfacial shear layer, over a narrow range of streamwise and spanwise scales, while fluctuations within the canopy are primarily maintained through inter-scale transfer and pressure-strain redistribution. The dynamically active scales in the canopy are largely imposed by outer-layer structures, with their organisation and coherence mediated by these inherited motions. Energy exchange across the canopy interface is asymmetric but not unidirectional: although the dominant transfer is from the outer layer towards the canopy, intermittent reverse interactions occur at all scales. The most intense cross-interface exchanges are associated with finer-scale motions rather than large-scale structures, indicating that extreme interfacial energy fluxes are governed predominantly by small-scale dynamics. The flexibility of the canopy weakens the coherence of outer-layer structures and reduces the efficiency of inter-layer energy transfer, thereby altering both the organisation and scale of the fluctuations within the canopy. These results clarify how turbulence in dense canopies is organised and sustained, providing a unified energetic interpretation that links coherent structures to scale-dependent mechanisms.

AG-2026.08-3019

physics.flu-dyn

Stochastic Transport and Wave Interactions for Multiscale Surface Gravity Waves: Part II: Kinetic Theory and Ocean-Wave Applications

E. Mémin, B. Chapron, A. Debussche, L Marié

Building on the stochastic variational framework established in the companion paper, we investigate here the linearized stochastic water-wave system, consisting of a large-scale stochastic wave dynamics coupled to transport dynamics for the small-scale correlation modes. Within this framework, we develop, in the deep-water regime, a kinetic theory for surface gravity waves interacting with unresolved stochastic velocity fields. An energy analysis yields a wave-action kinetic equation exhibiting two distinct regimes: a diffusive scattering regime and a quartic interaction regime with structural similarities to Hasselmann--Zakharov theory. In the present framework, these effective quartic interactions arise through stochastic transport of unresolved fluctuations by the large-scale flow rather than through classical intrinsic resonant nonlinearity. Scaling laws are derived for the diffusion tensor and the effective growth rate, revealing a Miles-type production--dissipation mechanism. Using JONSWAP spectra, we then compare the strength of stochastic transport and classical Hasselmann interactions. For realistic oceanic values of unresolved velocity variance ($σ_u \approx 0.1\,\mathrm{m\,s^{-1}}$) and decorrelation time ($τ_c \approx 10\,\mathrm{s}$), stochastic transport is found to compete with, and often exceed, classical four-wave interaction rates over broad spectral ranges. The transport intensity $S=σ_u^2τ_c$ emerges as a key parameter controlling the transition between interaction regimes. These results suggest that unresolved stochastic transport may play a substantially larger role in spectral evolution than is commonly represented in operational wave models, and motivate the inclusion of transport-induced source terms alongside standard resonant interaction closures.

AG-2026.08-3041

physics.flu-dyn

High-resolution in situ analysis of biomass pyrolysis by combining quantitative synchrotron $μ$CT and 3D particle-resolved simulations

Emeric Boigné, Mohamed M. Ahmed, Collin Foster, Edna R. Toro, Dilworth Y. Parkinson, Alastair A. MacDowell, Harold S. Barnard, Francesco Panerai, Chiara Saggese, Matthias Ihme

Understanding the coupling between transport, chemical kinetics, and structural response within solid fuel combustion requires in situ measurements at high spatial resolution. To examine the dynamics of biomass pyrolysis, we optimize synchrotron X-ray micro-computed tomography ($μ$CT), and conduct 3D particle-resolved simulations. A micro-focused heating cell with controlled heating and flow rate is employed, achieving temperatures of up to 1240 K and 3D imaging at 3.24 $μ$m spatial and sub-minute temporal resolutions. The pyrolysis of three biomass materials at sample heating rates of 10-14 K/min are examined. The $μ$CT measurements capture pore deformation, cracking, anisotropic shrinkage, and provide simultaneous thermogravimetric and thermovolumetric analyses to examine specific secondary pyrolysis pathways. Complementary 3D simulations considering detailed kinetics and structural response reproduce the key trends observed, and identify deficiencies in capturing simultaneous mass and volume losses during pyrolysis.

AG-2026.08-2933

physics.flu-dyn

Quantum-Inspired Computational Fluid Dynamics for Transient Turbulent Compressible Flows

Shang Xian Matthew Lee, Melissa Kozul, Muhammad Usman, Martin Sevior, Matthew L. Sims-Goh, Richard D. Sandberg

Quantum-inspired algorithms are an emerging class of algorithms for computational fluid dynamics (CFD) with potentially favourable scaling for large problems compared to classical methods. However, their applications have been limited to incompressible flows due to arithmetic limitations, which are addressed in this work. This work introduces the first complete quantum-inspired computational fluid dynamics (QICFD) solver for direct numerical simulation of the compressible Navier--Stokes equations, that is, all arithmetic operations are undertaken in the tensor train (TT) format. Importantly, new division and square-root algorithms using TTs enable the use of Sutherland's law for viscosity. The new QICFD solver is validated by comparison with the classical CFD solver HiPSTAR and by way of a challenging fluid-flow test case, the low resolution Taylor--Green Vortex (TGV) at Mach numbers of 0.8 and 0.1. The TGV test case is a transient turbulent case that is very sensitive to accumulating errors, yet our QICFD solver achieves excellent agreement with the classical CFD reference. This work demonstrates the correctness of the new TT division and square-root algorithms, and that QICFD is capable of compressible flow simulations. The new QICFD solver is also able to perform simultaneous simulations, running multiple TGV-like cases initialised differently in parallel with marginal (10-20%) extra cost. Finally, the demonstrated TGV test case reveals additional challenges of QICFD as well as highlight the need for future advances to make TT methods viable for industrially-relevant conditions.

AG-2026.08-3042

physics.flu-dyn

Turbulent diffusivity and effective rise velocity of buoyant particles in a free-surface boundary layer

Julio E. Chávez-Dorado, Lucia J. Baker, James J. Riley, Michelle H. DiBenedetto

Predicting the transport of buoyant particles in a free-surface boundary layer is important to the study of many environmental systems, including microplastics in the upper ocean. Current transport models, adapted from sediment transport theory, typically rely on assumptions of a quiescent rise velocity and gradient diffusion with an uncertain turbulent Schmidt number $Sc_t$. Here, we test this type of model against experiments by studying the vertical mixing of near-neutrally buoyant, finite-size spheres, rods, and disks in a wind-driven, wavy free-surface flow. We measure particle diffusivity directly from Lagrangian trajectories and compare against Eulerian concentration-based estimates. Overall, we find that particle buoyancy is the main control on the diffusivity, and that the diffusivity decreases as particle rise velocity grows relative to the turbulent fluctuations. These observations we find to be consistent with the crossing-trajectories theory, even in the presence of waves. In addition, we find that inferring the diffusivity from concentration profiles with an assumed quiescent rise velocity overestimates the diffusivity by up to a factor of $5$, consistent with effective rise velocities up to $80\%$ lower than the corresponding quiescent values. We also directly measure $Sc_t \approx 1$ for the neutrally-buoyant particles and $Sc_t > 1$ for the buoyant particles. Together, these experimental results demonstrate how standard model closures may be biased in both their diffusivities and rise velocities when applied to buoyant particles at the ocean surface.

AG-2026.08-3043

physics.flu-dyn

Density Field of Dilute Particle Flow in Two-Fluid Model with Incompressible Carrier Flow

Kazuhiro Tsuboi

We clarify some mathematical features of the density of a dilute particle flow on a body surface in a two-fluid model, with a view toward its application to icing simulations. Inviscid solutions in the vicinity of a front stagnation point are obtained in exact and perturbed forms for small and large Stokes numbers, respectively, and the behavior of the density of the dispersed phase is clarified over the entire range of Stokes numbers. The viscous effect of the laminar boundary layer in the carrier phase on the particle-free thin layer appearing in the low-Stokes-number regime is also investigated based on the incompressible Navier-Stokes equations. An order-of-magnitude estimation of the velocity field of the dispersed phase reveals the cause of this layer and the criterion for its appearance. In particular, the latter result provides an improved form of Michael's criterion.

AG-2026.08-3044

physics.flu-dyn

Linear and Nonlinear Latent-Space Reduced-Order Models for the Rayleigh--Taylor Instability

Téo Granger, Balu Nadiga, Benoît-Joseph Gréa, Antoine Briard, Paul Creusy

We use a large database of direct numerical simulations to investigate the transition of the Rayleigh--Taylor instability to turbulence and its evolution toward a late-time self-similar regime. In addition to tracking the growth of the mixing layer through the mean heavy-fluid concentration profile, we analyze one-dimensional profiles of turbulent kinetic energy and dissipation, two key quantities in classical turbulent-mixing models. We consider two reduced-order modeling strategies that differ in where nonlinearity is introduced: either in the construction of the latent space or in the description of its temporal evolution. The first method uses a linear encoder--decoder obtained using Proper Orthogonal Decomposition (POD), with nonlinear reduced dynamics learned by a physics-informed neural network (PINN). The second uses a nonlinear encoder--decoder learned by an autoencoder, while constraining the latent dynamics to remain linear and satisfy physical constraints. Both approaches achieve satisfactory performance in reconstructing, interpolating, and extrapolating the dynamics of the Rayleigh--Taylor instability.

AG-2026.08-3045

physics.flu-dyn

Gravity current fronts advancing along a heated wall

Stefano Lanzini, Mathieu Creyssels, Massimo Marro, Samuel Vaux, Pietro Salizzoni

The propagation of sustained Boussinesq gravity-current fronts along a heated wall is examined through laboratory experiments. The gravity currents are generated by continuously supplying a mixture of air and carbon dioxide at the inlet of a rectangular channel, while uniform wall heating is provided by resistive fabrics. In addition to the Froude number, defined either at the source (Fr_s) or at the current front (Fr), we show that the front velocity is governed by Λ_s, the ratio of the two buoyancy fluxes per unit area driving the flow: that generated by wall heating and that supplied at the inlet. As wall heating increases (i.e., as Λ_s increases), the current front propagates more slowly. This slowdown results from the direct heating of the current, which reduces the buoyancy of its head, and from the interaction between the front and the thermal plumes generated by natural convection downstream. In the most strongly heated experiments, the front eventually stops at a distance from the source that is inversely proportional to Λ_s. In these cases, the buoyancy of the head changes sign, and the head evolves into a positively buoyant plume whose vertical extent continues to increase. The experimental results are compared with predictions from a lumped analytical model describing the propagation and eventual arrest of the current.

AG-2026.08-3046

physics.flu-dyn

SnapPINN: Pressure and Energy Dissipation Reconstruction from a Sparse and Noisy Velocity Snapshot

Robin Barta, Christian Bauer, Gholamhossein Bagheri

Reconstructing pressure and turbulence quantities from experimental velocity measurements is challenging, especially without time-resolved data. Furthermore, limitations such as low seeding density, finite resolution, and measurement noise severely hinder the reconstruction of accurate flow fields. We introduce SnapPINN, a two-stage physics-informed neural network (PINN) that successfully reconstructs 3D velocity, their spatial gradients, pressure fields and estimates turbulent kinetic energy dissipation from a single snapshot of sparse, noisy velocity data. Evaluated here on 3D DNS turbulent pipe flow data, SnapPINN uses a sine-activated architecture with sequentially trained, decoupled velocity and pressure sub-networks. In stage 1, the velocity network fits particle data while enforcing incompressibility, serving as a physically consistent smoothing operator that regularises velocity gradients against noise. In stage 2, the velocity network is frozen, and the pressure network is trained using the pressure Poisson equation and the pretrained velocity gradients. We systematically map reconstruction performance of SnapPINN across 100 test cases to mimic challenging experimental, such as adding significant position noise, linearization of velocity field and seeding sparsity as low as $0.07\%$ of the fully resolved DNS grid. Quantitatively, bulk velocity was reconstructed within $0.5\%$, while errors remained below $50\%$ for the gradient-sensitive energy dissipation rate and within $4$--$24\%$ for the a~posteriori inferred $\mathrm{Re}_τ$, even under extremely sparse and noisy conditions. Finally, we establish a practical reliability map that shows which experimental conditions are likely to yield reliable SnapPINN reconstructions in the absence of ground truth.

AG-2026.08-3047

physics.flu-dyn

Z-Fold Wing Aeroelasticity: Compositional Modeling, 1:2 Double-Hopf Dynamics, and Nonlinear Stiffness Effects

Gelin Chen, Haolin Yang, Chen Song, Chao Yang

Folding changes the linearized aeroelastic spectrum and can switch which mode becomes unstable first, with consequences for local postflutter interactions. This study formulates a three-component Z-fold wing by assigning every aerodynamic station to a structural component and a material coordinate. The same attachment map generates surface motion and returns pressure loads through virtual work. Geometrically exact component dynamics, an explicit-wake unsteady vortex-lattice model, and block-structured descriptor assembly preserve the physical paths of configuration actions. A two-parameter flutter analysis shows that a smooth flutter-speed envelope conceals a high-low-high sequence of controlling neutral branches, expressed as a critical-frequency valley and a redistribution of component deformation. Numerical continuation locates a near-1:2 double-Hopf point. Within a local model retaining quadratic and cubic structural restoring forces with aerodynamic and inertial operators fixed at the scheduling point, the cubic normal form captures selected 26-state observations and admits high-frequency-dominant and mixed phase-locked periodic solutions. The formulation links configuration-dependent flutter-mode identity to local resonant dynamics and supports blockwise sensitivity and design reasoning.

AG-2026.08-3048

physics.flu-dyn

Resolvent analysis to inform viscoelastic coatings for turbulent drag reduction

Soumen Chakravarty, Venkat Narayanaswamy

Viscoelastic compliant coatings offer a passive route to modify wall-bounded turbulence; however, their effectiveness for drag reduction remains unresolved. We perform resolvent analysis of turbulent boundary layers over linear viscoelastic continuum, and apply it to incompressible hydrodynamic and compressible aerodynamic zero-pressure-gradient turbulent boundary layers, using both standard and eddy viscosity resolvent formulations. Across a wide range of storage modulus E and coating thickness H, viscoelastic surfaces amplify near-wall-cycle-type modes while also attenuating the resolvent gain of very large scale motions (VLSMs) by up to 50%, which together result in a reduction of Reynolds stress. For density-matched coatings representative of aqueous incompressible flows, however, these favorable bands lie entirely within the regime where the effective coatings are linearly unstable to traveling wave flutter, rendering them practically unrealizable. Optimizing material damping does not eliminate this but provides a pathway to use weaker sub-optimal interactions. In supersonic flow, the large solid-to-fluid density ratio (O(1000)) shifts the favorable interaction to substantially higher moduli, weakening the achievable reduction in turbulence production to a few percent. However, the strongest interaction band occurs in the linearly stable regime. These results suggest that compliant wall drag reduction via coupling with high gain modes is fundamentally constrained by flow-induced structural instabilities in incompressible applications, whereas the high density ratios of supersonic flow offer a much narrower but stable window for practical coatings.

AG-2026.08-3049

physics.flu-dyn

The ultimate state of elastic turbulence

Piyush Garg, Marco Edoardo Rosti

The asymptotic properties, with vanishing viscosity, of inertial turbulence in Newtonian fluids have been of intense scrutiny over the years. Much less is known about elastic turbulence - a distinct spatio-temporally chaotic state exhibited by viscoelastic fluids. In this work, using direct numerical simulations of turbulence in a triperiodic box, we show that elastic turbulence achieves an ultimate state with increasing polymer relaxation time, i.e., the Deborah number, for two different constitutive models (Oldroyd-B and FENE-P). In the limiting state, various bulk quantities - the fluid dissipation, the polymeric energy transfer, as well as the elastic stresses - are shown to become independent of the polymer relaxation time scale, notwithstanding the microstructure deformation scales distinctly depending on the model.

AG-2026.08-3050

physics.flu-dyn

Direct numerical simulation of NOx formation in turbulent lean premixed hydrogen-air flames under engine-relevant conditions

Chao Xu, Yiqing Wang, Riccardo Scarcelli

In this study, direct numerical simulations (DNS) are employed to investigate NOx formation in turbulent lean premixed hydrogen-air flames under engine-relevant conditions. Various turbulence intensities and molecular transport models are examined to isolate the individual impacts of turbulence intensity, Lewis number, and preferential diffusion on NOx production. Results show that NOx production is significantly enhanced in all turbulent cases relative to the laminar flame, reaching approximately five times the laminar value at a mixture residence time of 0.15 ms. Increasing turbulence intensity is found to have three competing effects on NOx formation: (1) it strengthens turbulence-instability interactions by inducing local super-adiabatic hot spots and elevating key flame radical concentrations within the flame brush, thereby promoting NOx formation locally; (2) it accelerates the turbulent flame speed, reducing the flame-brush residence time and thus suppressing NOx production globally; and (3) it reduces post-flame temperature fluctuations, suppressing thermal NOx enhancement in the post-flame zone. Lewis number effects are identified as the primary mechanism driving thermodiffusive NOx enhancement, with preferential diffusion playing a secondary role, as evidenced by the nearly identical NOx reaction rates between unity Lewis number turbulent flames and their laminar counterparts. Finally, an excellent correlation between the peak conditional mean NOx reaction rate and the stretch factor is identified, and a conceptual model is proposed to predict NOx enhancement in practical engine simulations. The findings highlight that turbulence--chemistry interaction is critical for accurately predicting NOx formation in thermodiffusively unstable hydrogen flames.

AG-2026.08-3051

physics.flu-dyn

Quantifying the effect of resonant amplitude and frequency of phononic material vibrations on the coupled fluid-structure interaction dynamics in separated aerodynamic flows

Vinod Ramakrishnan, Arturo M. Burgos, Sangwon Park, Andres Goza, Kathryn H. Matlack

Phononic materials (PMs) with engineered resonances have been leveraged for fluid-structure interaction (FSI) with fluid flow instabilities, yielding beneficial outcomes such as transition delay, stabilized hypersonic boundary layers, and increased aerodynamic lift. Prior PM-FSI studies primarily identify spatio-temporal flow scales of interest and choose PM structural parameters producing structural dynamics conducive for FSI. However, a fully-coupled FSI system generally produces complex coupled dynamics that is not accurately captured by studying either physical system in isolation. In this context, our prior work established behavioral parameters that govern the coupled PM-FSI dynamics in a separated aerodynamic flow over a limited parameter range. Adopting this framework, this paper explores strongly-coupled high-fidelity PM-FSI simulations over a broader range of two behavioral parameters---truncation resonance frequency and displacement amplitude---to establish their quantitative (linear/cubic) relations to the coupled frequency, lift force, and circulation in the coupled system response. In addition, the results indicate the presence of distinct FSI regimes, depending on the proximity of the truncation resonance frequency or its sub-/super-harmonics to the vortex-shedding frequency. FSI dynamics ranging from multi-/single-frequency dynamics, downshifted coupling frequency due to fluid-added mass effects, generation of non-linear harmonics to convergence of FSI dynamics to the rigid plate case are observed. These results reiterate the importance of the PM frequency and amplitude in determining the coupled FSI dynamics, and the proposed quantitative relations provide a new pathway for designing PMs for aerodynamic flow control to achieve beneficial outcomes, e.g., lift force enhancement.

AG-2026.08-3030

physics.flu-dyn

Variational Acoustics

Md Mahmudur Rahman, Ivan C. Christov

Many variational principles for acoustics have appeared in the literature, often introduced in an \textit{ad hoc} manner by picking and choosing terms in a Lagrangian density to yield a desired governing partial differential equation. In this chapter, we show that such guesswork is unnecessary, as the governing equations of acoustics can be derived systematically from the primitive Lagrangians of classical continuum mechanics. Furthermore, we note that using Eulerian coordinates is not the only way to derive variational principles in acoustics. To this end, we review the construction of an action in the Lagrangian frame for compressible nondissipative fluids. We explore the consequences of material relabeling symmetry and the associated pseudomomentum balance, together with the boundary and jump conditions it implies. Via perturbation expansions, we show how to recover the equations of linear acoustics from each variational principle, the material frame yielding in addition the second-order acoustic energy balance. We show how weakly nonlinear approximations with variational structure emerge in each frame, in both cases for a general barotropic fluid, with the nonlinearity carried by the fluid's parameter $B/A$ and the perfect-gas results recovered as a special case.

AG-2026.08-3052

physics.flu-dyn

The mass ejected by a bubble bursting from a free drop

Alfonso M. Ganan-Calvo

A bubble bursting at a flat liquid surface ejects droplets only below a critical Ohnesorge number Oh$_c\simeq0.043$. We ask how much it ejects when the bath is a drop of finite size. We solve the axisymmetric Navier--Stokes equations for a bubble of radius $R_0$ tangent internally to a free drop of radius $λR_0$, punctured at $t=0$, over liquid-to-gas volume ratios $Λ=V_{\rm liq}/V_{\rm gas}=λ^3-1$ from $1/16$ to $512$ and Oh from 0.005 to 0.11. Ejection ceases at Oh$_1=Oh_c(1+2β/λ)$ with $β\cong 0.83$, so confinement extends ejection to liquids too viscous, or bubbles too small, to eject at a flat surface. Two effects of first order in $1/λ$ produce the shift: the added Laplace overpressure of the outer surface, and the reduced inertia of the liquid shell. Our main result concerns the ejected mass $M_e$, which unlike the droplet count converges under mesh refinement. It obeys $M_e=C\,δ\,V_{\rm gas}V_{\rm liq}/(V_{\rm gas}+V_{\rm liq})$, with $δ=1-Oh/Oh_1$ and $C\simeq 0.013$, for $Λ\gtrsim0.2$: the two volumes combine as a reduced volume. When liquid is abundant this reduces to $M_e=C\,δ\,V_{\rm gas}$, a fixed fraction of the bubble volume, in agreement with classical jet-drop measurements; when gas is abundant, to $M_e=C\,δ\,V_{\rm liq}$. The fraction of liquid ejected spans four orders of magnitude, exceeding one third in the thinnest shells, where a distinct twin-jet mechanism takes over. Since hollow drops are generic in breaking waves, confinement includes bubbles that a flat surface would exclude and fixes what each delivers: two essential ingredients of sea-spray source functions.

AG-2026.08-2786

physics.flu-dyn

Neural-Network and Reduced-order Modeling Workflows for AI-Driven CFD: Fast Response Surfaces, Reduced Dynamics and Jet in Cross-flow Examples

Kaku E. Eduku, Pavel P. Popov, Gustaaf Jacobs

Highly resolved computational fluid dynamics (CFD) simulations are essential for design but too expensive for dense design-space sampling. This chapter presents an AI-driven CFD workflow that combines scalar-response modeling and reduced-order dynamics using jet-in-cross-flow examples. A reacting hydrogen jet-in-cross-flow study is first used to train a multilayer perceptron (MLP) mapping injector spacing to unburnt hydrogen throughput, wall heat transfer, and bulk temperature concentration, with shape-preserving interpolation as a baseline. The CFD samples show a non-monotonic spacing response, and the MLP identifies an intermediate-to-wide favorable region near eight jet diameters. Leave-one-sample-out validation shows strong dependence on the predicted quantity: the bulk temperature concentration is robust, while heat transfer and unburnt hydrogen throughput are substantially harder to predict. Sparse Identification of Nonlinear Dynamics (SINDy) is then used as a reduced-order modeling framework for field-derived Reynolds-stress statistics. The parametric SINDy model provides compact field-level predictions at simulated and out-of-sample spacings, though its aggregate spacing-mean Reynolds-stress error is $6.7\%$ higher than the POD-basis reconstruction because of degradation at selected cases. The broader conclusion is that AI-driven CFD is not a single-model prescription: MLPs are effective for fast scalar responses, while POD--SINDy is better suited when transient reduced dynamics and field-derived statistics are central to the question.

AG-2026.08-2787

physics.flu-dyn

A Scalable OpenLB LAMMPS Framework for Fully Resolved Simulations of Hindered Settling of Arbitrary Non-Spherical Particles

Varghese Babu, Adrian Kummerländer, Mathias J. Krause, Santosh Ansumali, Dilip Gersappe

Hindered settling of non spherical particles remains significantly less understood than spherical particles due to the computational challenges in resolving the complex contact mechanics and hydrodynamic interactions. In this paper, we present a scaleable fluid structure interaction (FSI) framework coupling the open-source LBM software in OpenLB with the Discrete Element Method (DEM) implemented in LAMMPS to simulate arbitrary shaped rigid bodies in a fluid. Particle contacts are captured using a multi-sphere "clump" representation in DEM, while particle geometries are resolved on the fluid grid via voxelization. We validate our model against single and multi-particle benchmarks, and proceed to study the hindered setttling of cubes in systems containing upto 100,000 cubes. Our simulations show distinct differences between the settling of cubes and sphere, as cubes form pronounced coordination shells without face-parallel contact, in contrast to the contact-dominated clustering observed in spheres. Our results find that correlation length in velocity fluctuations scale with system size even for the largest system studied. These findings highlight the role of particle morphology in suspension dynamics and demonstrate a robust framework for simulating large-scale geotechnical and particulate flows.

AG-2026.08-2788

physics.flu-dyn

A Compensated Koopman Neural Operator with Selective State-Space Dynamics for Unsteady Flows

Tangying Lv, Yuanjun Dai, Zhenxu Sun

Stable prediction of unsteady flows requires accurate multiscale spatial representation and robust temporal propagation. We introduce the Compensated Koopman U-shaped Neural Operator (CoKo-UNO), which combines a U-shaped spectral backbone with Koopman-dominated latent propagation. Finite-dimensional Koopman truncation produces a state-dependent residual that is repeatedly reinjected during autoregressive rollout. CoKo-UNO models this residual with a selective state-space model (SSM), a principled input-dependent compensation mechanism, together with resolution-adaptive compensatory skip connections and an overlapping-warmup rollout strategy. \NEW{Across four benchmark problems, CoKo-UNO achieves the lowest mean rollout error among all compared methods. Its largest gain is a $76.76\%$ reduction relative to the strongest baseline, while requiring about $41.40\%$ of RNO's training time.} These results show that explicit residual compensation improves stable autoregressive prediction of unsteady flows.

AG-2026.08-2789

physics.flu-dyn

Fock-Space Representation of the Lebowitz--Frisch--Helfand Kinetic Model

Ilya Karlin

We develop an exact Fock-space representation of the Lebowitz--Frisch--Helfand kinetic equation. The familiar square-root Maxwellian transformation is used only as a convenient starting point: it maps the local Ornstein--Uhlenbeck relaxation sector to the bosonic number operator and thereby exposes an elementary grading. The main issue is the representation of the complete kinetic dynamics when the velocity realization depends on local macroscopic parameters. We formulate the pull-back through an arbitrary admissible realization map, show that external space--time derivatives acquire a differential connection, and prove an intertwining theorem for first-order propagation operators. The physical velocity moments are represented by dual Fock-space functionals; a transport--moment intertwining theorem then evaluates the complete propagation contribution without requiring the explicit differential connection. Compatibility between realization parameters and kinetic moments may be imposed algebraically or propagated dynamically by exact balance laws. In the hydrodynamic limit, the number grading selects the second and third Fock levels responsible for viscous stress and heat flux, leading directly to the Navier--Stokes--Fourier constitutive terms. Finally, we prove covariance under local changes of coordinate realization and illustrate it explicitly for Hermite-polynomial and Hermite-function coordinates. Thus the Hermite realization is computationally privileged, while the intertwined Fock dynamics, physical moments, and compatibility structure are representation-independent within the admissible similarity class.

AG-2026.08-2790

physics.flu-dyn

Vortex filament dynamics and vortex ring motion revisited

Andrew D Gilbert

The motion of a slender vortex in ideal incompressible fluid is a classic problem in hydrodynamics. Formulae for the velocity of a vortex ring go back to work of Kelvin, Helmholtz, Hicks and Dyson in the nineteenth century, while more recently a number of models have been created for simulating the motion of slender tubes of vorticity of general shape. For a vortex tube or filament localised near to a curve C(t), the relevant small parameter to measure slenderness is the tube radius divided by the radius of curvature of C. The present paper revisits this range of classic problems by introducing a coordinate system closely linked to the geometry of vortex surfaces in a slender vortex. The motion of fluid elements in this coordinate system has an action--angle form, and with this the vorticity equation simplifies radically. At the same time, however, most aspects of the shape or evolution of a vortex are thrown into the description of the coordinates, and in particular the corresponding metric and volume form. As the coordinate system is non-orthogonal and time-dependent, tools of differential geometry are most easily used to describe the structure of both vorticity and coordinate system, and a general mathematical framework is set out. This resulting system of equations is taken as far as possible with only the assumption of vortex slenderness in place, but allowing arbitrary motions and distortions of the vortex core and of the curve C(t). The modelling is applied to calculate the motion of a slender vortex ring with arbitrary axial flow, solving directly for the shape of perturbed vorticity surfaces and giving results in agreement with earlier studies. The general framework set up in this paper is suitable for the development of simplified equations for vortex motion and interaction in future studies.

AG-2026.08-2792

physics.flu-dyn

An SPH--mesh Coupling for Vesicle Dynamics in Shear Flow

Kuiliang Wang, Xinwei Cai, Ting Ye, Xuejin Li, Xin Bian

We present a novel computational framework that couples smoothed particle hydrodynamics~(SPH) with a triangulated membrane mesh to simulate the dynamics of vesicles suspended in fluids. A novel interface-tracking approach enforces membrane impermeability naturally, without resorting to non-physical constraints such as particle reflection or bounce-back boundary conditions. The membrane model incorporates four distinct bending energy formulations, namely the minimal model, the spontaneous curvature (SC) model, the bilayer couple (BC) model, and the area difference elasticity (ADE) model, providing a versatile tool for diverse biophysical scenarios. The framework is rigorously validated against equilibrium shapes and tank-treading motion of a vesicle, demonstrating excellent agreement with previous theoretical and numerical studies. A systematic investigation into the effects of each bending model on the vesicle's inclination angle, revolution frequency, and morphology in shear flow reveals key physical insights. Notably, spontaneous curvature has a negligible effect on steady-state orientation but profoundly alters rotational dynamics at low reduced volumes through the emergence of dumbbell-like shapes with deep constrictions. In contrast, the BC and ADE models induce characteristic asymmetric and stomatocyte morphologies. Our results establish the proposed SPH--mesh coupling as an accurate and robust tool for exploring the complex, shape-dependent dynamics of vesicles in fluid flows.

AG-2026.08-2793

physics.flu-dyn

Physics-Guided Generative Surrogates for Parametric Rarefied Flows with Neural-Field Auto-Decoders: A Pipeline-Level Study of Flow Matching and Diffusion

Yiming Qi, Guan Zhang, Xu Wang, Yonghao Zhang, Tianbai Xiao

We present a conditional latent generative framework for parametric rarefied flows that separates neural-field representation, latent transport, and frozen physics adaptation. Neural-field auto-decoders compress discrete-velocity cavity solutions and direct simulation Monte Carlo cylinder solutions into shared coordinate decoders. Train-only principal-component charts support conditional flow matching (FM) and diffusion without a deterministic condition-to-latent backbone, and structured low-rank adapters correct selected decoder outputs while the upstream pipeline remains frozen. On two steady benchmarks, the frozen pipelines interpolate out-of-sample conditions with cavity kinetic relative $L_1$ errors at the $10^{-5}$ level and cylinder per-field area-weighted RMSEs of 0.038 (density), 0.041 (temperature), and below 0.01 (velocities). For the cavity, physics adaptation reduces the matched-grid Bhatnagar--Gross--Krook diagnostic by 28.65% while preserving field accuracy; for the cylinder, the analytic wall map enforces no-penetration exactly and, jointly with the learned FM adapter, reduces the inlet violation to 0.277 and the global mass-balance ratio to 0.963 of the frozen values with negligible field-error change. A five-seed controlled comparison with deterministic condition-to-chart multilayer perceptrons shows that, although the generative pipelines do not surpass the compact MLP in point accuracy on these single-valued steady problems, the results validate sampling-based conditional transport on the shared representation as an effective steady surrogate, with a natural route to multivalued or stochastic solution families.

AG-2026.08-2795

physics.flu-dyn

First-principles perturbative theory of anomalous scaling in a stochastic shell model of turbulence

Alexei A. Mailybaev

Deriving anomalous scaling exponents from the equations of motion remains a central problem in the statistical theory of turbulence. Here we obtain a first-principles perturbative solution for a nonlinear stochastic dyadic shell model. The model preserves the conservative cascade structure and exact scaling symmetry of the deterministic dynamics, while stochastic transfer fluctuations provide a perturbative setting in which the leading-order rescaled dynamics is Gaussian. Using the statistically restored hidden scaling symmetry of the inertial-range equations, we determine the stationary statistics of the rescaled variables. We then formulate anomalous scaling as a Perron--Frobenius eigenvalue problem for the multiplier statistics. The resulting perturbative expansion yields explicit analytical expressions for the scaling exponents of structure functions of arbitrary order in the weak-noise regime. Direct numerical simulations provide an independent verification of the theoretical predictions. The results demonstrate that the hidden-symmetry perturbation framework extends from linear random models to a genuinely nonlinear cascade system.

AG-2026.08-2796

physics.flu-dyn

Wing-Rotor Aerodynamic Interactions in Small UAVs During Hover and Cruise

Dev Pradeepkumar Nayak, Seungmin Choi, Muhammad Saif Ullah Khalid

A compact vertical take-off and landing aircraft requires the same tilt-rotor configuration to perform two fundamentally different aerodynamic tasks: sustain hover and deliver efficient cruise. This work investigates the underlying wing-rotor interactions in both operating regimes using a validated unsteady Reynolds-averaged Navier-Stokes equations-based computational framework. For cruise, the advance ratio governs the balance between thrust production, propulsive efficiency, and wake coherence. Lower advance ratios produce a tightly wound slipstream that undergoes strong vortex interactions, leapfrogging, and early wake bifurcation. At higher advance ratios, the slipstream retains a narrower and more coherent jet-like structure, improving propulsive efficiency while reducing both thrust of the propellor and lift of the wing. The flow impingement at the wing is characterized through the approaching, interaction, and convection phases, revealing the combined influence of vortex stretching, wake bifurcation, blockage, image-induced velocity, and streamwise momentum convection on the downstream wake. In hover, the propeller's rotational speed governs the overall aerodynamic performance more strongly than the wing's placement. Although the position of the wing with respect to the propellor modifies the local wake interactions and flow impingement on its leading edge, its influence on the integrated thrust coefficient and figure of merit remains limited. We also explain the vortex and wake dynamics around the propellor and the wing responsible for governing these aerodynamic performance.

AG-2026.08-2797

physics.flu-dyn

The Hidden Second Law of Thermodynamics behind the Boltzmann-Grad Limit

Zhaohua Wu

We demonstrate that the Boltzmann-Grad (BG) limit, $N\varepsilon^{d-1} = α= \mathrm{const}$, is not a neutral mathematical scaling condition but already encodes the Second Law of Thermodynamics through the directional exchange of molecules between adjacent imaginary cells. By treating the Boltzmann distribution function as describing air parcels, and using the one-dimensional Gaussian velocity distribution, we show that: (i) the net molecular flux across any imaginary cell boundary is non-zero due to the isotropic nature of molecular motion, with more molecules crossing from the higher-temperature cell to the lower-temperature cell; (ii) the net momentum flux is non-zero whenever adjacent cells differ in thermodynamic properties; and (iii) this momentum imbalance --- the microscopic origin of the macroscopic pressure gradient --- drives the system irreversibly toward uniformity. The collision operator $Q(f,f)$ is reinterpreted as the macroscopic force arising from cross-boundary molecular exchange, establishing that the Boltzmann equation is Newton's Second Law expressed as a transport equation in phase space, with the Second Law built into its structure from the outset. Furthermore, Clausius's macroscopic statement that heat flows spontaneously from hot to cold is shown to be a direct manifestation of the spontaneity of Newton's First Law at the microscopic level. This resolves Loschmidt's paradox: temporal irreversibility does not emerge during derivation --- it is already present in the choice of the BG limiting framework. The true source of the paradox lies not in the conflict between reversible dynamics and irreversible thermodynamics, but in the irreconcilable tension between the spontaneity of inertia and the external constraint required to reverse it.

AG-2026.08-2544

physics.flu-dyn

Ice melting in an oscillatory flow

Sofía Angriman, Tobias de Buck, Roberto Verzicco, Sander G. Huisman

We investigate the melting dynamics of an ice disk subjected to an external oscillatory flow using two-dimensional direct numerical simulations, in the absence of buoyancy, varying the flow amplitude and its oscillation frequency. We identify two distinct regimes governed by the interplay between advection and diffusion within the boundary layer. For slow oscillations, the melting process is well described by an effective steady flow, where a description based on classical forced convection is applicable. For fast oscillations the melting time increases significantly and approaches the diffusion limit regime, as a result of the oscillatory flow being unable to renew the fluid within the oscillating boundary layer, causing cold meltwater to accumulate near the interface and reducing heat transfer.

AG-2026.08-2545

physics.flu-dyn

Effects of pressure on the chemical sooting structure of equi-diffusive counterflow diffusion flames

Rajat Sawanni, Ömer L. Gülder

The effects of pressure on the chemical sooting structure of equi-diffusive soot formation (SF) in a counterflow diffusion flame (CDF) are explored in a combined experimental and numerical study over pressures ranging from 1 bar to 6 bar. Experiments preserve the diffusive flame structure and carbon flux at increasing pressures and utilize measurements of soot concentrations, dispersion exponents and soot production rates. Numerical simulations are completed in OpenSMOKE++ with detailed \ce{C1}-\ce{C16} chemistry, lumped PAH consideration up to \ce{C160}, sectional soot model and tracking of the C/H ratio in particulates. Network-based tools are utilized to study the organization and evolution of carbon routing pathways. Results show that for equi-diffusive flames, soot concentration increases with residence time and pressure, whereas soot production rates are influenced only by pressure. Soot C/H ratio is observed to increase with pressure using numerical and experimental methods, but numerical solutions underestimate the increase in hydrogen abstraction reactions. The soot-forming network undergoes a percolation-like organization of its pathways before soot inception. The network then continues to grow by adding connections through its influential nodes. Acetylene is identified as a highly influential node in the carbon transfer graph, with its influence increasing with pressure.

AG-2026.08-2547

physics.flu-dyn

Feedback control of vortex shedding using data-driven modelling

Jack Proudfoot, Chris J. Nicholls, Brian M. T. Tang, Marko Bacic

This paper details the data-driven modelling and feedback control of vortex shedding past a circular cylinder at a Reynolds number of Re = 1000. We study the effect of varying the order of the reduced model for control design purposes and demonstrate that higher orders can lead to lower suppression of vortex shedding. We use the Bode integral theorem and a frequency-domain interpretation to show that this drop in performance is, in part, due to the classical ``waterbed effect'', which increases sensitivity in frequency bands of unmodelled dynamics. Training data from 2D unsteady simulation is used to obtain linear reduced-order state-space models of the system via dynamic mode decomposition with control. Using only lift measurement, we show that at least a 4th-order model is required for an LQG controller to suppress vortex shedding, with the best performance achieved with as few as 9 modes, whilst higher-order (>14) controllers show a significant decrease in performance. We study the influence of external disturbances, noise rejection, and parameter uncertainty on controller performance. A 28.6 dB reduction in lift coefficient variance is achieved, resulting in a 26% reduction in drag. We further show that, for control design purposes with practical actuation bandwidth, the closed-loop control delivers a significant 13.7% drag reduction within 3D DDES, despite having been trained with 2D URANS and therefore argue that 2D URANS simulation is sufficient for reduced-order model generation and control design.

AG-2026.08-2548

physics.flu-dyn

Assessment of turbulent fire dynamics and combustion instabilities using a flamelet model

Yunxiao Yan, Fabian Brännström, Christian Hasse, Xu Wen

The Sandia one-meter methane fire plume is an established benchmark for turbulent combustion modeling of large-scale flames. This study investigates the combustion instabilities formed close to the base of the Sandia fire plume. Finite rate chemistry and differential diffusion are considered using a flamelet/progress variable (FPV) approach. The performance of the FPV approach is assessed by comparing with the eddy dissipation model (EDM) and the experimental data for the large-scale fire plume via large eddy simulations (LES). The effects of radiation modeling and mesh resolution on the predictive capability of the model are systematically investigated by comparing the axial and radical velocities against the experimental data at various locations. Although all models successfully capture the primary flow characteristics of fire plumes, the FPV model with differential diffusion yields improved predictions in the near-flame-base region. The formation mechanism of cellular flow structures near the flame base is investigated via a budget analysis of the vorticity equation, and the type of instability governing the formation of the cellular structure is clarified. Finally, the individual effects of finite rate chemistry and differential diffusion on the prediction of the thermo-chemical quantities are quantified. Overall, this study explains the underlying physics governing combustion instabilities at the base of turbulent fire plumes, provides novel insights into the performance of flamelet models for LES of gaseous pool fires, and offers reliable guidance for the high-fidelity numerical simulation of large-scale turbulent buoyancy driven flames.

AG-2026.08-2551

physics.flu-dyn

Backflow-Induced Inertial Arrest of Velocity Fluctuations in Sedimenting Suspensions

Hsien-Hung Wei

A self-contained hydrodynamic theory is proposed to reconcile the discrepancy between divergent Stokesian velocity fluctuations and finite experimental measurements in sedimenting suspensions. We show that the compensating backflow induces non-negligible inertia, giving rise to an emergent screening length $ξ\sim aφ^{-1/3}Re_p^{-1/3}$ far exceeding the mean interparticle spacing $aφ^{-1/3}$ even at vanishingly small particle Reynolds numbers. This backflow inertial screening, together with finite-time viscous diffusion, arrests the indefinite spatiotemporal growth of large-scale velocity fluctuations. The resulting velocity fluctuations scale as $δu \sim φ^{1/3}V_sRe_p^{-1/6}$, together with the viscous correlation time $τ_c=ξ^2/ν$, reproducing the well-known hydrodynamic self-diffusivity scaling $D_H\sim V_s a$. The theory predicts the prefactors of these scaling laws without adjustable parameters, in good quantitative agreement with experimental measurements. It also successfully captures the experimentally observed crossover from the finite-correlation regime to the finite-system regime as the screening length becomes comparable to the system size.

AG-2026.08-2552

physics.flu-dyn

Momentum-scalar coupled turbulence with anomalous momentum and scalar diffusions. Part 2: With short-range external force and implementation in electrokinetic turbulence

Wei Zhao

We extend the generalized anomalous diffusion framework established in Part I to the short-range forcing regime ($β> 2/3$), where the multiscale-force dominated (MFD) subrange is intercalated after the inertial subrange, competing directly with the dissipation ranges. Focusing on electrokinetic (EK) turbulence as the prototypical example with $β=1$, we derive the relations for the velocity and scalar dissipation wavenumbers, $k_{MD}$ and $k_{SD}$, across all four subranges of the Quad-cascade process (inertial, constant-$Π_u$, constant-$Π_s$, and variable flux). By incorporating Golestanian's predicted anomalous diffusion regimes for electrolytes, we construct comprehensive phase diagrams showing how the relative magnitudes of $k_{MD}$ and $k_{SD}$ are governed by the scale-dependent anomalous Schmidt number $Sc_Z$. We identify two new spectral subranges that emerge exclusively in this short-range forcing regime: (i) the convective-viscous subrange ($k_{MD} \ll k \ll k_{SD}$) of velocity spectrum for $Sc_Z \gg 1$, where the scalar field drives a viscous flow yielding $E_u \sim k^{-\left(\frac{3}{2} + \frac{ξ_s}{2}\right)}$ with a stretched-exponential cutoff; and (ii) the diffusive-forcing subrange ($k_{SD} \ll k \ll k_{MD}$) of scalar spectrum for $Sc_Z \ll 1$ and $γ\leq α$, where the scalar dissipation range determines the electric forcing, leading to $E_s \sim k^{ξ_u - 2α}$. These results provide a complete analytical map of EK turbulence under anomalous diffusion, revealing how external parameters such as electric field strength and ionic diffusivity determine the cascade topology.

AG-2026.08-2553

physics.flu-dyn

Momentum-scalar coupled turbulence with anomalous momentum and scalar diffusions. Part 1: Without external force and with long-range external force

Wei Zhao

We present a theoretical model for momentum--scalar coupled turbulence in which both fields undergo anomalous diffusion, described by fractional biharmonic operators of orders $γ/4$ and $α/4$, respectively. Focusing on the long-range external forcing or unforced turbulence, we derive analytical expressions for the kinetic energy spectrum $E_u(k)$, the scalar spectrum $E_s(k)$, and the characteristic wavenumbers $k_K = \left( \frac{ε_u^{1/3}}{c_u} \right)^{1/(γ- 2/3)}$ (reciprocal of Kolmogorov scale) and $k_S = \left( \frac{ε_u^{1/3}}{c_s} \right)^{1/(α- 2/3)}$ (reciprocal of scalar dissipation scale) as functions of $γ$, $α$, turbulent dissipation rate $ε_u$, diffusivities of momentum ($c_u$) and scalar ($c_s$), respectively. An anomalous Schmidt number $Sc_Z = k_0^{γ- α} \frac{c_u}{c_s}$ is defined to governs the cascade topology. It describes the ratio of diffusion times of scalar and momentum on the minimum wavenumber $k_0$. Superdiffusion ($γ<2$ or $α<2$) is shown to counter-intuitively enlarge $k_K$ and $k_S$, broadening the inertial range. The theory unifies the classical Kolmogorov--Obukhov--Corrsin--Batchelor scalings as special cases when $γ=α=2$, and provides a foundation for understanding non-Fickian transport in complex turbulent systems.

AG-2026.08-2531

physics.flu-dyn

The Stokes resistance of an arbitrary particle: a classification of hydrodynamic symmetries

Clément Moreau

The linearity of the Stokes equations organises the hydrodynamic response of a rigid particle into a hierarchy of resistance operators, coupling successive truncations of the ambient-flow jet to moments of the surface traction. Since the work of Kelvin and Larmor, it has been known that this response does not resolve particle geometry faithfully: bodies with discrete rotational symmetry may be indistinguishable from bodies of revolution (Brenner's helicoidal symmetry) and a chiral body may respond isotropically, as in Kelvin's isotropic helicoid. We regard the resistance operators as elements of finite-dimensional O(3)-representation spaces and use character formulae to determine, at every level of the hierarchy, which point-group symmetries are hydrodynamically distinguishable and the dimension of each invariant space. This yields an explicit nested sequence of hydrodynamic symmetry-group sets, from the translation-force level to the quadratic-flow level. The framework reveals hydrodynamic classes that no shape can realise geometrically, gives helicoidal symmetry a level-dependent definition, and shows that polyhedral symmetry becomes visible in a strict order: tetrahedral symmetry in shear, octahedral symmetry through the stresslet, and icosahedral symmetry in quadratic flow. Projecting the resistance operators onto force- and torque-free motion provides symmetry-based parameter counts and a constructive route to the corresponding dynamical normal forms. We thereby complete the Jeffery-Bretherton-Ishimoto classification, characterise all hydrodynamic classes producing Jeffery dynamics, and identify chiral tetrahedral and octahedral normal forms that can generate irregular full-attitude dynamics.

AG-2026.08-2296

physics.flu-dyn

Increased throughput in antisymmetrically actuated acoustofluidic flow-through devices

Klara Andersson, Sazid Z. Hoque, Wei Qiu, Andreas Lenshof, Pelle Ohlsson, Henrik Bruus, Thomas Laurell

Separation of low-abundance biological objects requires high throughput for practical use of an acoustofluidic system. Increasing the flow rate helps in achieving high-throughput if the acoustic energy density can be increased proportionally, and this may be possible with an efficient coupling of the transducer to the device. In particular, antisymmetric actuation using two electrodes with opposite phases is theoretically proven to enhance the acoustic energy density of the device. In this work, we study the symmetric and antisymmetric actuation mechanisms of an acoustofluidic system using both experiments and three-dimensional numerical simulations. The acoustic focusability experiments show that under the same electrical input power, the antisymmetric actuation mode performs better than the symmetric actuation, quantified in terms of the normalized width of the band formed by the focused particles. Numerical simulations of this particle bandwidth are performed for both actuation modes, and the results suggest that the antisymmetric actuation mode is more robust than the symmetric one, being weakly dependent of the geometric symmetry properties of the system. The simulation results corroborate the experimental findings, which indicate that the antisymmetric actuation increases the acoustophoretic efficiency and robustness for high-throughput applications.

AG-2026.08-2285

physics.flu-dyn

Lagrangian Curvature Statistics from Gaussian Subensembles in Turbulent Flows

Yasmin Hengster, Johannes Bosbach, Daniel Schanz, Andreas Schröder, Moritz Linkmann

A salient feature of fully turbulent flows far from onset is the intermittent occurrence of extreme fluctuations at small spatial and temporal scales. These have a qualitative and quantitative effect on the instantaneous curvature of a tracer particle trajectory as an intrinsically multi-scale observable. Here, we provide a complete statistical description of the curvature of tracer particle trajectories in turbulent flows that includes and quantifies intermittency effects. We derive an exact expression and a closed-form approximation for the curvature probability density function, both agree well with data obtained from laboratory experiments of different types of turbulent flows, and quantify the generic behavior of the system. The method can be extended to more complex systems such as plasma turbulence.

AG-2026.08-2297

physics.flu-dyn

Weakly Compressible Subcycling for Accelerating Simulations of Surface-Tension-Dominated Incompressible Two-Phase Flows

Shu Yamashita, Shintaro Matsushita, Tetsuya Suekane

Simulations of surface-tension-dominated incompressible two-phase flows are computationally expensive due to the severe capillary time-step constraint. Although many studies have proposed time-implicit discretizations of surface tension to allow larger time-step sizes and accelerate simulations, these methods suffer from either artificial dissipation or complex implementation. Here, we propose a simple and novel approach: an incompressible solver with weakly compressible subcycling. The proposed approach relaxes the capillary time-step constraint, thereby accelerating simulations by more than $8.6\times$ without relying on artificially dissipative stabilization or requiring complex implementation. The key idea is to introduce lightweight substeps using a weakly compressible solver to assist the main incompressible solver. These substeps enable the main incompressible solver to use accurately computed fluxes and surface tension force, even with large time-step sizes. Numerical tests demonstrate the effectiveness of the proposed approach for practical problems, including the Rayleigh--Plateau instability and two-phase flows in porous media. This study paves the way for a new paradigm in which a weakly compressible solver serves as an assistant to an incompressible solver.

AG-2026.08-2298

physics.flu-dyn

Dynamics of an internally actuated elastic particle in a plane Poiseuille flow

Shashikant Verma, Prateek Anand, Navaneeth Kizhakke Marath

We analytically analyse the dynamics of an internally actuated particle, modelled as a compressible elastic sphere embedded with a magnetic bead at its undeformed centre, translating in a plane Poiseuille flow in the Stokes limit. The particle is constrained to translate with a prescribed velocity while remaining at an arbitrary position within the flow by applying an external point force and external point torque at its undeformed centre. The governing equations for the fluid and particle are the Stokes and Navier elasticity equations, respectively. We use the series solutions to the governing equations and the domain perturbation method to capture the deformed shape of the particle, assuming $α\ll 1$. Here, $α$ quantifies the elastic strain induced in the particle due to the viscous stress from the fluid. The external force and external torque are obtained until O($α^2$). The particle translating along the channel length experiences an elastic-induced hydrodynamic lift as well as hydrodynamic torque both at O($α$) and O($α^2$). The leading-order lift depends linearly on the local shear rate and on the combined effects of slip velocity and flow curvature, where the slip velocity is defined as the particle velocity relative to the local ambient flow. The particle reaches a stable equilibrium position away from the centreline, where the net lift vanishes. We show that the direction of deformation-induced lateral migration of the internally actuated particle is qualitatively distinct from that of drops, capsules, and vesicles in the Stokes limit and from that of rigid spheres undergoing inertial migration.

AG-2026.08-2299

physics.flu-dyn

$\mathscr{PT}$-symmetric hydrodynamics of odd viscous liquids and their oscillator counterparts

E. Kirkinis, A. Levchenko

Odd viscosity, the nondissipative part of the viscous response of a time-reversal-broken fluid, is notoriously difficult to measure precisely because it does no work. Here we show that parity-time ($\mathscr{PT}$) symmetry, familiar from non-Hermitian optics, converts this elusiveness into a measurement principle. The odd Navier-Stokes equations, that include the nonlinear inertial terms, are $\mathscr{PT}$-symmetric, follow from a Lagrangian, and linearize to a Schrödinger equation in which the odd viscosity plays the role of Planck's constant; potential vorticity obeys a generalized Ertel conservation law. A probe trapped in an odd liquid realizes a pair of oscillators coupled by odd friction, and supplying balanced loss and gain drives a twofold $\mathscr{PT}$ transition whose exceptional point and Rabi sidebands locate the odd viscosity with square-root-enhanced sensitivity. Upon quantization the spectrum is of Fock-Darwin form, and the dissipative pair exhibits a Liouvillian exceptional point separating linear from exponential heating. These results furnish mechanical, stochastic, and spectroscopic protocols for measuring odd transport coefficients in classical and quantum fluids.

AG-2026.08-2300

physics.flu-dyn

Drafting-Kissing-Tumbling Dynamics of Two Particles Subjected to Horizontal Oscillations

Fabian Kleischmann, Bernhard Vowinckel

We investigate the effects of horizontal oscillations on the drafting--kissing--tumbling (DKT) dynamics of two monodisperse spherical particles settling under gravity in a viscous fluid. Applying particle-resolved direct numerical simulations, we systematically vary the oscillation frequency and amplitude to assess their impact on the behavior of individual particles, their mutual interaction, and the orientation of the particle arrangement. The results demonstrate that the oscillatory effects on DKT become significant only when the particle Reynolds number $Re_p$, defined as the ratio of oscillation-induced inertial to viscous forces, exceeds unity. In this regime, oscillations alter the temporal characteristics of the DKT process, with moderate amplitudes tending to prolong and larger amplitudes to reduce the kissing phase. Moreover, oscillations affect particle reorientation. At low $Re_p$, the particles maintain their initial orientation throughout the interaction, whereas an increasing $Re_p$ promotes a preferential alignment perpendicular to the direction of oscillation. We explain these findings by analyzing the oscillation-induced pressure fields surrounding the individual particles, which develop increasingly pronounced lateral anisotropy with increasing $Re_p$. The corresponding lateral hydrodynamic forcing likewise becomes increasingly anisotropic, providing a consistent physical basis for the observed modification of particle interactions and reorientation. These findings provide a physical framework for understanding how horizontal oscillations govern binary particle--particle interactions and orientation during gravitational settling.

AG-2026.08-2301

physics.flu-dyn

Dissimilar heat transfer enhancement in spatially developing flow between parallel perforated plates by inducing a streamwise travelling-wave disturbance

Fengbo Guan, Ming Liu, Yosuke Hasegawa

Travelling-wave-like wall blowing and suction is an effective approach for enhancing heat transfer with a minimal pressure drag penalty. However, achieving such a dissimilar heat transfer enhancement effect in a passive manner remains a challenge. In the present study, we propose introducing parallel perforated plates to induce travelling-wave-like disturbances passively. Pore-resolving simulations of a spatially developing laminar flow between parallel perforated plates are performed across a wide range of Reynolds numbers of $Re = 500-1500$ and pore-to-solid length ratios of $L_\mathrm{p}/L_\mathrm{s} = 0-10$. Dissimilar heat transfer enhancement is confirmed for $9 \leq L_\mathrm{p}/L_\mathrm{s} \leq 10$ at $Re = 1000$ and $4 \leq L_\mathrm{p}/L_\mathrm{s} \leq 7$ at $Re = 1500$. The highest analogy factor, i.e., the ratio of the Stanton number to the friction coefficient is obtained at $Re = 1500$ and $L_\mathrm{p}/L_\mathrm{s} = 6$, yielding an increase of more than $30$\% compared to that of an impermeable solid plate. Analysis of the fluctuating fields shows that, in the travelling-wave flow regime, a pressure-induced wall-normal velocity fluctuation transports temperature fluctuations away from the perforated plate, while breaking the correlation between the streamwise and wall-normal velocity fluctuations. This enhances the turbulent heat flux relative to the Reynolds shear stress near the perforated plate. The present results indicate that introducing a perforated plate with a suitable porosity induces travelling-wave velocity disturbances and also achieves a considerable dissimilar heat transfer effect even at low Reynolds numbers where a standard impermeable flat wall yields a steady laminar flow.

AG-2026.08-2067

physics.flu-dyn

Stability and nonlinear dynamics of three-layer viscous films inside a vertical cylindrical tube

David Halpern, Awa Traore

We investigate the dynamics and stability of three immiscible viscous liquid layers coating the interior of a vertical cylindrical tube, a configuration relevant to stratified core--annular transport processes. A long-wave asymptotic analysis yields a coupled system of nonlinear evolution equations governing the motion of the three interfaces. Linear stability analysis predicts a persistent long-wave instability, the capillary (Rayleigh--Plateau) instability of the air--core interface, together with secondary finite-wavenumber instability bands that emerge from interfacial coupling in certain parameter regimes. These stability characteristics depend sensitively on the layer thicknesses, viscosity ratios, and surface tension parameters, and include mode-switching associated with competing maxima in the dispersion relation. Nonlinear simulations reveal three distinct dynamical outcomes: saturation to finite-amplitude travelling waves, air-core closure through plug formation, and rupture of the intermediate liquid layer while the air core remains open. The intermediate-layer rupture mechanism is unique to the three-layer configuration which has no analogue in one- or two-interface cylindrical film flows. Numerical continuation is used to compute branches of travelling-wave solutions and their associated limit points. Comparison with time-dependent simulations shows that travelling-wave branches successfully predict the transition from saturated waves to plug formation, but do not capture the distinct rupture mechanism associated with collapse of the intermediate layer.

AG-2026.08-2068

physics.flu-dyn

Effect of Microscale Turbulent Structures Dynamics on Forced Convection in Turbulent Porous Media Flow

Ching-Wei Huang, Vishal Srikanth, Andrey V. Kuznetsov

The influence of microscale flow structures (smaller than the pore size) on turbulent heat transfer in porous media has not been yet investigated. The goal of this study is to determine the influence of the micro-vortices on convection heat transfer in turbulent porous media flow. Turbulent flow in a homogeneous porous medium was investigated using Large Eddy Simulation (LES) at a Reynolds number of 300. We observed that the convection heat transfer characteristics are dependent on whether the micro-vortices are attached or detached from the surface of the obstacle. There is a spectral correlation between the Nusselt number and the pressure instabilities due to vortex shedding. A secondary flow instability occurs due to high pressure regions forming periodically near the converging pathway between obstacles. This causes local adverse pressure gradient, affecting the flow velocity and convection heat transfer. This study has been performed for obstacles with shapes of square and circular cylinders at porosities of 0.50 and 0.87. Understanding the dominant modes that affect convection heat transfer can aid in finding an optimum geometry for the porous medium.

AG-2026.08-1793

physics.flu-dyn

Mach-disk formation and shock-structure transitions in underexpanded coflowing jets

Ganesh Dhungana, Srijan Satyal, Nek Sharan

The near-field shock structures of underexpanded sonic jets exiting into a subsonic coflow are investigated over a range of nozzle pressure ratio (NPR) and coflow-to-nozzle-exit velocity ratio ($U_c$), representative of a propulsive nozzle in subsonic flight. Time-averaged statistics from fully-resolved axisymmetric simulations and inviscid method-of-characteristics (MOC) analysis are used to understand how coflow alters the shock-cell structures, in particular the Mach-disk formation. It is well established that increasing NPR transitions the centerline reflection from regular (characterized by oblique shocks) to Mach reflection (characterized by a near-normal Mach disk). We find that coflow has the opposite influence: a strong coflow shrinks the Mach disk until it vanishes, reverting Mach reflection to regular reflection, so the NPR for this transition increases with $U_c$. This effect has previously been attributed to a reduction in the jet-boundary inclination at the nozzle lip, which confines the lip Prandtl-Meyer fan to a smaller angle and weakens the embedded shock. We show instead that this inclination is determined by the non-uniform pressure the coflow imposes along the jet boundary, which is the primary driver of the shock-structure transitions in coflowing jets. The non-uniform pressure weakens the boundary-reflected compression waves and orients them at shallower angles, so the embedded shock reflects regularly or fails to form. A simulation-informed MOC analysis with this non-uniform pressure boundary condition reproduces the transition behavior with increasing coflow. Coflow also lengthens the first shock cell linearly, which is accurately estimated by a simple correction to Prandtl classical shock-cell length scaling.

AG-2026.08-1794

physics.flu-dyn

Orientation-dependent drag, lift, and torque correlations for regular Platonic polyhedral particles

Manuel A. Taborda, Berend van Wachem

In this work, particle-resolved direct numerical simulations are performed to investigate flow past the five Platonic solids, which represent a progression in particle sphericity with an increasing number of faces. The simulations cover particle Reynolds numbers in the range 0.1 <= Re_p <= 300 and multiple particle orientations relative to the incoming flow. Based on the numerical data, new correlations are developed for the drag, lift, and torque coefficients. The proposed drag correlation explicitly accounts for both Reynolds number and particle orientation, whereas the lift and torque coefficients are represented by orientation-dependent trigonometric and exponential basis functions whose coefficients vary with Reynolds number. The simulations are conducted using the immersed boundary method, and the resulting drag correlation accurately reproduces the numerical data. The lift and torque correlations capture the principal trends observed in the numerical simulations, including the strong dependence on particle orientation. The proposed correlations provide a computationally efficient framework for incorporating orientation-dependent hydrodynamic forces and torques into Euler--Lagrange and point-particle simulations, enabling a more realistic representation and predictions of non-spherical particle transport in multiphase flows.

AG-2026.08-1795

physics.flu-dyn

Hydrodynamic Brachistochrone: Conflicting Paths of Time and Energy Minima within Viscous Media

Ramin Gasimli, Lei Yi, Shrabin Bajracharya, Anupam Pandey, Varghese Mathai

We experimentally and theoretically study the hydrodynamic analog of the classical brachistochrone problem: the {\it time-} and {\it energy-minimizing} paths for a spherical particle rolling down an incline within a viscous fluid. We show that in the presence of viscous dissipation, the paths of minima diverge from the classical cycloid, into curves of opposing curvature for time and energy, and are characterized by an effective dimensionless parameter, $St_p$, representing the ratio of the particle's viscous response time scale to its gravitational time scale. Using a generalized variational framework, we show that the fastest path reduces to {nearly straight ramps}, however, beginning and terminating in localized cycloids of curvature, $κ_c \sim St_p^{-2}$. Remarkably, the path of fastest descent on a given energy budget requires navigating a non-monotonic path ({\it``S-shaped''}) with an interior point of inflection. Our findings reveal a unification of temporal and energetic optimality for transport through dissipative media, and expand the celebrated brachistochrone solutions to the hydrodynamic regime.

AG-2026.08-1796

physics.flu-dyn

Inter-turbine spacing and flow unsteadiness effects on wake-induced blade dynamics

Francisco J. G. de Oliveira, Adrian T. McGlade, Zahra Sharif Khodaei, Oliver R. H. Buxton

Wind turbines operating downstream of others in a farm are routinely exposed to waked inflow, with reduced mean velocity and elevated turbulence driving power deficits and additional structural fatigue. The direct effect of wakes on blade-level structural loading remains under-explored experimentally, owing partly to the sparse spatial coverage of conventional point-based strain sensors. Here, we present a wind-tunnel study of wake-induced blade dynamics using two $1\,\mathrm{m}$-diameter turbine models, in which one blade of a downstream turbine ($WT_2$) is instrumented with distributed Rayleigh-backscattering fibre-optic strain sensors, providing spatially continuous strain measurement across the blade span. By changing the relative position of the upstream turbine ($WT_1$) to the downstream, waked turbine $WT_2$ across the streamwise and spanwise extent, we map power output, spanwise strain, and accumulated representative fatigue relevant loading across the wake profile. Full wake impingement suppresses blade loading through the associated velocity deficit, while partial wake overlap generates the strongest load intermittency and highest relative fatigue relevant loading, despite an intermediate power recovery. A combined performance-to-loading metric shows this partial-wake regime offers the least favourable trade-off between energy yield and structural loading. These results show that minimising partial-wake exposure, not only mean velocity deficits, should be a design consideration for wind-farm layout and turbine spacing.

AG-2026.08-1797

physics.flu-dyn

Physics-informed neural network for inverse modeling of granular flows

Bing Wan, Bidan Zhao, Junwu Wang

Granular flows are ubiquitous in natural and industrial systems, yet their complex dynamics remain difficult to characterize. For inverse problems involving unknown inlet, outlet, and wall boundary conditions, where CFD simulations are challenging, reconstructing complete flow fields from sparse observations constitutes a challenging inverse problem. In this study, a physics-informed neural network framework driven by both physical mechanisms and measurement data is developed to reconstruct the steady-state full-field distribution of granular flows in a pipe. The proposed approach integrates sparse measurement data with governing equations and constitutive relations and is trained using high-fidelity datasets generated by CFD solutions of a continuum model. The framework incorporates a dimensionless loss formulation, physics-informed initialization, dynamic global weighting, and a locally weighted granular temperature data-loss strategy. These treatments enable accurate reconstruction of the complete flow-field evolution. This work establishes a robust methodological framework for flow-field reconstruction in complex granular flow systems.

AG-2026.08-1798

physics.flu-dyn

Fully Parallel Dual-Grid Immersed-Boundary Framework for Flow-Induced Sound from Complex Moving and Deforming Bodies

Amirhossein Fardi, Muhammad Saif Ullah Khalid

Predicting flow-induced sound from moving and deforming bodies is computationally demanding because the near-field hydrodynamics and the far-field acoustics require substantially different spatial resolutions and domain extents. A fully parallel hybrid framework is developed to address this disparity by coupling an incompressible Navier-Stokes solver to an acoustic perturbation equation (APE) solver on independently generated, non-conforming Cartesian grids. A sharp-interface ghost-cell immersed boundary method, with radial-basis-function reconstruction, imposes the boundary conditions for complex moving geometries on both grids. The converged flow field supplies the acoustic source through a one-way, precomputed parallel interpolation operator. This arrangement confines the flow grid to the body and wake while allowing the acoustic grid to extend independently into the far field. The framework is validated for Gaussian-pulse propagation, pulse scattering by a rigid cylinder, tonal sound from flow past a cylinder, and radiation from a traveling wavy foil. The predicted waveforms, wavelengths, pressure amplitudes, and radiation patterns agree closely with analytical solutions and published reference data. Applications to eel and Jack fish locomotion, a four-eel school, a manta ray, and a harbor seal further demonstrate the treatment of realistic three-dimensional morphologies, large boundary deformation, and multiple interacting swimmers. The results resolve morphology-dependent acoustic signatures and interference-driven changes in far-field directivity without requiring the flow grid to span the acoustic far field.

AG-2026.08-1799

physics.flu-dyn

Intrusive versus non-intrusive reduced-order modeling of generalized Newtonian fluid flows

Parajal Rai, Michelle Spanjaards, Patrick Anderson, Ye Wang, Nick Jaensson

This study compares three reduced-order modeling (ROM) approaches for flow simulations of generalized Newtonian fluids described by the Carreau rheological model. All three methods rely on offline snapshot generation in the rheological parameter space using the full-order model (FOM), followed by a proper orthogonal decomposition (POD) of the snapshot matrix to obtain a reduced basis, but they differ in how they reconstruct the solution for new parameter values in the online phase. The three ROM approaches examined are: (i) intrusive Galerkin projection onto the reduced basis with full operator reassembly (ROM-FULL), (ii) intrusive hyper-reduced Galerkin projection using the discrete empirical interpolation method with GappyPOD for the nonlinear term (ROM-DEIM), and (iii) a non-intrusive interpolation approach using radial basis function interpolation (ROM-RBF). We demonstrate these three ROM approaches on two benchmark flows: a lid-driven cavity and a sphere settling in a closed container, spanning boundary-driven and force-driven flows. ROM-FULL achieves the highest accuracy but requires reassembling the full-order nonlinear operator during the online phase, whereas ROM-RBF is fully non-intrusive, and its accuracy is closely tied to data availability and deteriorates outside the training data range. ROM-DEIM offers a balance between efficiency and accuracy, even when data are sparse. The results provide guidelines for selecting an appropriate ROM strategy based on solver accessibility, computational efficiency, and desired accuracy.

AG-2026.08-1578

physics.flu-dyn

A Residual Learning Approach for Unsteady Aerodynamic Load Prediction

Divya Sanghi, Carlos E. S. Cesnik

This paper investigates the feasibility of using residual learning to improve unsteady aerodynamic load prediction for aeroelastic applications. The machine learning technique selected for the study is the long short-term memory (LSTM) neural network, which is used for its suitability for sequential data with aerodynamic memory effects. The approach is investigated for the NLR 7301 airfoil benchmark using high-fidelity CFD lift data for prescribed pitch and plunge motions in the transonic flow regime in the presence of shock motion. An analytical unsteady aerodynamic model based on the Wagner function is used as a physics-based baseline, and the neural network is trained to learn the difference between the CFD lift coefficient and the Wagner prediction. The residual model is compared with a direct neural-network model trained to predict the CFD lift coefficient. The comparison includes feature and normalization studies, external benchmark cases, and leave-one-out and leave-family-out generalization tests across a range of sinusoidal and non-sinusoidal motions. The residual model performs best when its inputs align with the Wagner formulation variables, generally giving lower error and more consistent performance across training runs, though the direct model remains more accurate for some high-frequency cases. The residual model also generalizes better in the leave-one-out and leave-family-out tests, with a smaller increase in error than the direct model when entire motion families are withheld from training. Overall, the results indicate that residual learning shows promise as a modular approach for augmenting classical low-order aerodynamic theories, especially when the physics baseline removes a structured part of the aerodynamic response and leaves a lower-variance correction for the neural network to learn.

AG-2026.08-1579

physics.flu-dyn

Towards Rapid Prototyping of Spray Injectors: A Regime-Agnostic Neural Operator Surrogate for Gas-Liquid Interface Evolution

Paolo Guida, Po-Han Chen, Hong G. Im, William L. Roberts

Spray atomisation rapidly creates large liquid-gas interfacial areas and is central to many industrial processes. However, predicting spray behaviour and surface area remains difficult: experiments cannot access all spray regions, while CFD becomes prohibitively expensive as finer structures develop. Data driven surrogates can learn interface evolution, enabling rapid design space exploration, operating condition ranking, and ultimately spray control. We investigate how state representation, neural architecture, and physics-informed regularisation affect long horizon autoregressive forecasting of spray interfaces, particularly conservation. Our principal model is a boundary-conditioned Fourier Neural Operator (FNO) that predicts the evolution of the signed distance function (SDF) from the liquid-gas interface. It is trained on 2D sharp interface Volume-of-Fluid CFD simulations spanning several atomisation regimes. The SDF-FNO retains interface fidelity better than an FNO trained directly on volume fraction, but is outperformed by a U-Net. Objective function ablation shows that a liquid inventory penalty improves conservation at a modest cost to local interface accuracy. We also introduce a physics-informed extension combining an open-domain target-increment liquid balance penalty, a narrowband Eikonal regulariser that preserves signed distance geometry, and a phase-boundedness penalty. Although this model trains stably, it leaves forecast error, interface overlap, and inventory behaviour essentially unchanged relative to the data driven baseline. Finally, we demonstrate the surrogate by ranking injection conditions according to interfacial area generated per unit gas injection power across the operating envelope of a fixed geometry.

AG-2026.08-1581

physics.flu-dyn

Modelling flow-driven pore closure of weakening poroelastic media

Matthew V. Ghosh, Matthew G. Hennessy, Andreas Münch, Sarah L. Waters

Poroelastic materials, such as polymer tissue scaffolds, porous rocks, and hydrogels, can weaken due to interactions between the solid skeleton and chemical species in the interstitial fluid. We develop a mathematical model for a poroelastic material to provide fundamental mechanistic insight into how weakening the material can affect the time-varying mechanics of the system. Our model couples large-deformation poroelasticity with an advection-diffusion equation for the solute. Furthermore, we introduce a decay equation for the material stiffness, whose rate of decay depends on the solute concentration. In this way, we describe a three-way coupling between poroelastic deformation, weakening of the skeleton and transport of solute through the material. We exploit numerical and analytical techniques to reveal the flow-driven uniaxial compression of a weakening poroelastic material and determine parameter regimes for which weakening the material facilitates pore closure at the downstream boundary. We identify parameter regimes in which (1) a steady state is attained without pore closure, (2) pore closure occurs at a finite time or (3) the pores close instantaneously; we uncover case (2) through the introduction of weakening into the system. We provide insights into the relationship between the differing behaviours and the separation between the timescales of the system. For systems with slow weakening, we derive a leading-order approximation for the time of pore closure, treating the ratio of the timescales of poroelastic relaxation and weakening as a small parameter, and investigate the accuracy of this approximation and the new behaviours that arise when these timescales become comparable.

AG-2026.08-1582

physics.flu-dyn

Roughness-controlled layer in oscillatory turbulent boundary layers over densely packed uniform roughness

Xuchen Liu, Yuan Gao, Yiyong Dong, Jing Yuan

In coastal wave boundary layers over gravel-scale roughness, with near-bed orbital excursions ten to a hundred times the roughness height, the boundary layer is only a few roughness heights thick. A roughness-controlled layer (RCL) of the steady-flow extent two to five element heights would then leave no room for a logarithmic layer, yet experiments over densely packed marbles recover logarithmic profiles within millimetres of the crests. We resolve this contradiction by re-analysing previous Particle Image Velocimetry (PIV) records with a triple decomposition that separates the marble-locked dispersive motion from the stochastic turbulence, across eleven wave, current and wave-current conditions. The boundary layer organises into an RCL, a transition region, and a logarithmic profile layer, with the RCL only one to two tenths of a marble diameter deep. This thinness is kinematic: above a periodic bed, the dispersive field decays over a length fixed by the element spacing, so close packing caps the layer at a fraction of a diameter. The layer is destroyed and rebuilt every half-cycle, tracking the near-bed velocity quasi-steadily, while the eddies within it stay locked to the inter-crest gap. Thinness does not imply weakness: within the layer, the dispersive kinetic energy rivals the turbulent kinetic energy, and the dispersive stress matches, near the crests exceeds, the Reynolds stress, showing that separated wakes carry organised momentum. The logarithmic layer survives because the decay length imposed by the packing is far smaller than the boundary-layer thickness, a margin set by the bed geometry rather than by the forcing.

AG-2026.08-1583

physics.flu-dyn

Steady transport of active particles under continuous release in confined shear flow

Hanhan Zeng, Guoqian Chen

Continuous release is a fundamental source condition in transport, yet theoretical treatments have focused on downstream concentration development for passive solutes or fully developed cross-sectional distributions of active particles. We develop a spatial theory for the steady transport of active particles under continuous release in confined shear flows, resolving the concentration field from the inlet to the far field. Based on the Smoluchowski equation, we formulate a boundary-value problem with point-source inlet flux and boundary conditions. Separation of the streamwise coordinate from the cross-sectional variables yields a non-self-adjoint generalized eigenvalue problem, whose spatial modes are superposed to construct the solution. The eigenproblem is solved within a Galerkin spectral framework; downstream-admissible modes are retained and their coefficients determined from the inlet flux through a weighted biorthogonal expansion. Excellent agreement with individual-based simulations validates the theory. For plane Poiseuille flow under convection-dominated conditions, we find pronounced position--orientation coherence for spherical particles in the early developing region: swimming and shear reorientation drive the population through successive angular stages, generating alternating off-centre and centreline accumulation regions downstream, while dispersion progressively weakens this coherence. Particle elongation enhances orientational alignment, producing an early three-peaked vertical profile and stronger, more persistent lateral accumulation downstream, while reducing the coherence of centreward migration and thereby suppressing secondary centreline accumulation. The streamwise marginal concentration varies non-monotonically, reflecting changes in the mean streamwise velocity, with its far-field limit given by the reciprocal of the asymptotic drift velocity.

AG-2026.08-1584

physics.flu-dyn

Optimal control of a swimming robot based on Purcell's microswimmer model

Noam Berkovich Lahav, Oren Wiezel, Yizhar Or

Purcell's swimmer is a well-known planar model of a swimming microorganism, governed by low Reynolds number hydrodynamics, which is comprised of three rigid links connected by actuated rotary joints. This model has been analyzed as a robotic locomotion system governed by first-order nonlinear dynamics with a periodic input (gait) of the two joint angles. In this work, we present a robotic macro-scale realization of this three-link swimmer moving in a highly viscous fluid. We propose a simple variant of Purcell's theoretical model with non-slender links and a central rigid sphere which represents the added drag of the robot's central flotation block, and calibrate the model's parameters to fit experimental measurements. Next, we apply optimal control formulation based on Pontryagin's Maximum Principle (PMP) in order to find optimal gaits that maximize the displacement per cycle under bounds on the joint angles. Employing a differential geometric method that transforms the problem to area integral enclosed by the gait trajectory in the plane of joint angles, enables visual interpretation which explains topological changes in displacement-optimal gaits upon varying the bound on the joint angles. We then apply PMP formulation to the problem of maximizing Lighthill's energy efficiency in order to obtain a boundary value problem (BVP) whose solution gives efficiency-optimal gaits for Purcell's swimmer model, as well as its variant with a central sphere. Finally, we utilize numerical methods such as parameterizing the input gait as a truncated Fourier series, as well as GPOPS-II solver, to produce sufficient initial guess values for solving the BVPs and obtaining efficiency-optimal gaits.

AG-2026.08-1585

physics.flu-dyn

Noise-separated evidence for a slow collective displacement in a rarefied hypersonic bow-shock layer

Ahmad Shoja-sani, Ehsan Roohi

Time-resolved direct simulation Monte Carlo (DSMC) fields are used to test whether a detached rarefied hypersonic bow shock contains a slow collective displacement that can be separated from correlated particle-sampling fluctuations. Mach-10 rotationally relaxing nitrogen flow over a circular cylinder is analysed for diameter-based Knudsen number $0.01\leq \KnD\leq1$, where $\KnD=λ_\infty/D$, $λ_\infty$ is the freestream mean free path and $D$ is the cylinder diameter. A density half-jump front is extracted on body-normal rays, unsupported solid-side points are excluded, and temporal coarse graining is performed before feature extraction. Persistent and sampling covariance components are compared using a penalized composite-fit score, design-scale cross-validation, block resampling, synthetic controls and complementary full-field matched filters. Corrected field proper orthogonal decomposition (POD) is high rank at every Knudsen number, yet a weak, same-signed angular displacement is resolved at $\KnD=0.01$ and $0.025$. Independent random-seed and simulator-particle-loading repeats recover the angular shape and relaxation time while the raw sampling variance changes with loading. Across the two resolved states the mean density layer broadens by $82\%$, while the angular shapes remain strongly aligned. Density and pressure recover the marker motion most strongly; the reduced Mach-number and translational-temperature participation at $\KnD=0.025$ is evidence consistent with moment-selective weakening, although observable-dependent signal-to-noise remains a possible contributor. The signal is interpreted as a low-pass bow-layer response embedded in broadband kinetic fluctuations, not as a newly discovered discrete oscillation or a demonstrated linear instability. The higher-Knudsen records are not sufficiently sensitive to establish physical disappearance.

AG-2026.08-1586

physics.flu-dyn

Autonomous route to the strange attractor: the many life stages of the chaotic bubblewheel

Michael Zhao, Saverio E. Spagnolie

A body floating atop a supersaturated fluid may accumulate bubbles along its underbelly, which can render the body rotationally unstable. But rotation can strip the surface of these bubbles when they make contact with the air above. To explore this coupling we perform experiments using cylinders floating on carbonated water. The cylinders exhibit an array of distinct dynamics, including constant rolling, periodic and aperiodic oscillation, chaos, and intermittent capsizing, which can be tuned by body size, mass distribution, and gas concentration. A continuum model for the bubble density dynamics, and Galerkin projection, tie the experiment to the generalized Lorenz system and its famed chaotic attractor. Even an extremely small center-of-mass offset can have a qualitative impact on the dynamics, and an offset of as little as a few percent can fully stabilize the system. The experiment represents a highly accessible physical realization of the Lorenz system, which, owing to continuous gas loss from the fluid to the air above, sweeps slowly without intervention across a classical bifurcation diagram in time.

AG-2026.08-1587

physics.flu-dyn

Turbulent Microscale Flow Field Prediction In Porous Media Using Convolutional Neural Networks

Vishal Srikanth, Ching-Wei Huang, Ryan Harradine, Andrey V. Kuznetsov

Turbulence modeling in porous media can be greatly improved by combining high-resolution numerical methods with modern data-driven techniques. The development of accurate macroscale models (length scale greater than the pore size) will enable real-time systemic simulations of porous media flow. We consider the case of turbulent flow in homogeneous porous media, typically encountered in engineered porous media (heat exchangers, metamaterials, combustors, etc.). The underlying microscale flow field is inhomogeneous and determined by the geometry of the porous medium. Neural Networks are able to resolve the geometry-dependence and the non-linearity of porous media turbulent flow. We are proposing to separate the macroscale model into individual blocks that predict a unique aspect of the microscale flow, such as microscale spatial flow distribution and vortex dynamics. In the present work, we determine the feasibility of the prediction of the Reynolds-averaged microscale flow patterns by using Convolutional Neural Networks (CNN). The porous medium is represented by using a square lattice arrangement of circular cylinder solid obstacles. The pore-scale Reynolds number of the flow is 300. The porosity of the porous medium is varied from 0.45 to 0.92 with 60 steps. The microscale flow field is simulated by using Large Eddy Simulation (LES) with a compact sixth-order finite difference method. We demonstrate satisfactory prediction of the microscale flow field using the CNN with a global error less than 10%. We vary the number of training samples to study the deterioration of the model accuracy. The CNN model offers a O(106) speedup over LES with only 10% loss in accuracy.

AG-2026.08-1320

physics.flu-dyn

Volume-preserving Lagrangian averaging using polar factorization

Abhijeet Minz, Lois E. Baker, Jacques Vanneste

The generalised Lagrangian mean (GLM) theory of Andrews & McIntyre provides a powerful framework to study the interactions between waves and flows. A drawback of this theory is that the Lagrangian mean velocity is divergent even for incompressible fluids because the mean flow map, which sends the Lagrangian labels of fluid parcels to their mean positions, does not preserve volume. This results, for instance, in vortices shrinking under Lagrangian averaging. We overcome this drawback by revising the definition of the mean flow map, choosing it as the volume-preserving map closest to the "bare" GLM mean map. A standard result of optimal-transport theory then shows that the new mean map is the volume-preserving factor in the polar factorization of the GLM mean map. We develop and implement a numerical method for the computation of the corresponding Lagrangian mean fields from simulation data. The implementation builds on recently developed algorithms for the on-the-fly computation of Lagrangian means using the exponential and Butterworth filters. We demonstrate the value of volume-preserving Lagrangian averaging in simulations of the two-dimensional incompressible and shallow-water models. We compare the Lagrangian-mean fields obtained with and without the volume-preservation constraint.

AG-2026.08-1321

physics.flu-dyn

A diffuse-interface method for compressible two-phase flows with seven- and six-equation models

Luis H. Hatashita, Suhas S. Jain

In this work, a novel phase-field method is proposed for the six- and seven-equation non-equilibrium models for simulating compressible two-phase flows. Such formulations allow for monotonic mixture speed of sound, minimizing artificial wave delay during transmission across an interface. The proposed phase field formulation is constructed from the baseline seven-equation model, and interface-regularization terms are added in divergence form, while maintaining consistency between the partial differential equations without introducing spurious source terms. It admits conservative phasic and mixture entropy transport equations, thus facilitating the construction of discrete conservative schemes. The six-equation formulation is obtained under instantaneous velocity equilibrium. To avoid eigenvector degeneracy of the system of PDEs, the volumetric interface regularization flux is modified to account for a finite amount of conjugate phase, which improves on how phasic density is captured implicitly. Stability of compressible two-phase flow rely on the preservation of the interface-equilibrium conditions, and the preservation of discrete kinetic energy and entropy. A detailed analysis of IEC demonstrates additional requirements on the consistency of flux splittings between the convective and interface-regularization terms for all quantities, as well as the effects on the phasic internal energy flux splittings. A KEEP discretization is proposed and evaluated over a suite of high-density ratio test cases, including interface advection, acoustic wave-induced bubble oscillation, oblique acoustic wave reflection and transmission, and two-phase Taylor-Green vortex flow. Results demonstrate accuracy, stability and robustness for very long time integrations, a desired feature for simulation of turbulent flows and acoustics, since the framework does not rely on the addition of numerical dissipation.

AG-2026.08-1322

physics.flu-dyn

A source-term interpretation of turbulent rough wall-pressure spectra

J. M. O. Massey, A. J. Smits, B. J. McKeon

Wall-pressure fluctuations beneath a turbulent boundary layer drive the flow-induced noise and structural loading of rough surfaces. On a smooth wall their variance grows with the logarithm of the Reynolds number, a growth carried, in a source-term reading, by the nonlinear turbulence--turbulence part of the pressure source acting across the logarithmic layer. We ask what sets the same growth once the wall is fully rough. Standard rough-wall phenomenology answers it: above the roughness the mean flow keeps its smooth-wall logarithmic form, so the active source range is cut off at the roughness height rather than the viscous length, and the variance grows on the logarithmic span between the roughness height and the layer thickness in place of the Reynolds number. Splitting the pressure source into its two physical parts then distinguishes separate contributions to the energy: a roughness-local one from the mean-shear source, fixed at high frequency on the roughness scale, and an energetic one from the nonlinear source at the outer scale, which alone carries the growth. Calibrated against rough-wall cases, the model collapses the spectral shape onto this energetic peak and holds it Reynolds-independent at fixed geometry. The canopy contribution decays with distance from the wall and contributes a finite offset. The growth coefficient is predicted to be the smooth-wall one. The present range is too narrow to discriminate that rate from twice or half it, so the contribution is a parameter-free prediction and the identification of a suitable roughness-size sweep that would test it.

AG-2026.08-1323

physics.flu-dyn

Intermittent turbulence in inclined gravity currents

Lianzheng Cui, Graham O. Hughes, Maarten van Reeuwijk

Inclined gravity currents on shallow slopes can exhibit pronounced turbulence intermittency. Using direct numerical simulations, we investigate this behaviour for a temporal gravity current over a range of initial Reynolds numbers $Re_0$. For $Re_0=2500$ and a slope angle of $0.5^\circ$, the outer layer of the current exhibits large excursions in turbulence intensity and repeated transitions between turbulent and weakly turbulent states. Analysis of the flow energetics reveals that the intermittency is associated with a finite delay between shear production and dissipation of turbulent kinetic energy. During transitional phases, this delay permits a transient amplification of turbulence, which significantly weakens the mean shear by extracting kinetic energy from the mean flow and promoting entrainment-driven layer growth, ultimately leading to relaminarisation. Increasing $Re_0$ reduces the delay and progressively suppresses intermittency, steering the flow towards a more sustained turbulent state. Motivated by these observations, we develop an autonomous delay-differential model based on the coupled evolution of the mean and turbulent kinetic energies. The model reproduces the observed transition from intermittent to sustained turbulence as the delay is reduced and predicts an increased tendency towards intermittency at larger flux Richardson numbers. The results support an interpretation of intermittent turbulence in inclined gravity currents as a delay-induced oscillation arising from the finite adjustment time of turbulence to changes in the mean flow.