Loading…
Loading…
physics.geo-ph
AG-2026.08-633
physics.geo-ph
Mitchell D. Jans, Cyprien Soulaine, Judy Q. Yang, Ian C. Bourg
Gravity driven sediment flows are responsible for a major portion of sediment redistribution within oceans, reservoirs, and lakes, with important implications in coastal erosion, siltation, carbon burial, and contaminant migration in aquatic systems. Despite the ubiquity of this phenomenon, current mechanistic understanding of sediment gravity flows (SGFs) remains limited. This knowledge gap is particularly acute in the case of cohesive, fine-grained sediments (i.e., muds) due to the complex properties of the clay matrix, including low permeability, viscoplastic rheology, and flocculation. In this work, we develop a computational fluid dynamics model that accurately predicts key features of cohesive, clay-rich SGFs based on independent measurements of the relation between sediment solid fraction and rheological yield stress. In particular, the model captures the four primary flow regimes (low density turbidity currents, high density turbidity currents, mudflows, and mudslides) observed in lock-exchange experiments with slurries containing smectite or kaolinite clay. The model is validated through comparison with previous experimental observations of sediment flow morphology, speed, and runout distance. Overall, we demonstrate the ability to predict the influence of intrinsic (particle size, grain density, and rheology) and extrinsic sediment properties (sediment topography and solid fraction) in the development of self-sustaining cohesive SGFs.
10 Aug 2026
1mo ago
AG-2026.07-2255
physics.geo-ph
Pritom Sarma, Eduardo Arzabala, Carolina Hurtado-Pulido, Einat Aharonov, Renaud Toussaint, Stanislav Parez, Cynthia Ebinger
Coastal Louisiana is sinking, amplifying flooding and land loss, yet the seasonal component of this motion remains difficult to attribute. Satellite geodetic records from Baton Rouge spanning 2004-2024 reveal long-term subsidence of -2.69 +/- 0.69 mm/yr, with a superimposed annual oscillation of 10-15 mm that is in phase with river stage and confined-aquifer hydraulic head. This positive correlation is diagnostic of poroelastic deformation rather than surface loading. A poroelastic model of a semi-confined aquifer driven by hydraulic-head variations reproduces both the long-term and seasonal signals. The seasonal amplitude decreases logarithmically with distance from the intersection of the Baton Rouge Fault and the Mississippi River, as expected for radial pressure diffusion from a flux source. Fault-river intersections therefore act as seasonal conduits into deep aquifers, representing an underappreciated control on coastal land motion that is likely to strengthen as hydrological extremes intensify.
28 Jul 2026
1mo ago
AG-2026.06-2267
physics.geo-ph
Souvik Naskar, Jonathan E. Mound, Christopher J. Davies, Hannah F. Rogers, Stephen J. Mason, Andrew T. Clarke
The time-averaged geomagnetic field provides crucial insights into deep Earth dynamics and thermal core-mantle interactions. Paleomagnetic observations and numerical dynamo simulations are equivocal regarding the longitudinal structure of the time-averaged field, though the latter have often considered a generic buoyancy source, which may obscure distinct signatures of thermal and chemical buoyancy that arise near the equator and poles, respectively. In this study, we present a new suite of top-heavy geodynamo simulations, varying the relative strengths of thermal and chemical driving and comparing the resultant magnetic signatures to observational field models spanning centuries to tens of thousands of years. None of the spatially-averaged measures of field morphology and variability we tested could robustly distinguish between different levels of chemical driving or the presence of heterogeneous outer boundary heat flux. On the other hand, observational constraints requiring longitudinal variations in time-averaged inclination anomaly are readily matched by simulations with heterogeneous outer boundary thermal forcing, in contrast to those with homogeneous mantle heat flux. Longitudinal field structures are reduced, but not erased, by elevated chemical driving, which also promotes the formation and deepening of polar minima in the radial magnetic field. Our simulations indicate that both the strong heat flux heterogeneity and chemical driving in Earth's core are likely to result in small but persistent departures from the geocentric axial dipole approximation.
24 Jun 2026
AG-2026.06-966
physics.geo-ph
Zhihao Xu, Takumi Araki, Simran Chauhan, Brian C. Crow, Max A. A. Dornfest, Stephen T. Dye, John Graham, Misaki Hosoya, Kunio Inoue, John G. Learned, Viacheslav A. Li, William F. McDonough, Takeru Ohno, Takanobu Ono, Taichi Sakai, Jackson Seligman, Nathan Sibert, David Vartanyan, Hiroko Watanabe, Jeffrey Yepez
Geoneutrinos, electron antineutrinos produced by radioactive decays of heat-producing elements (HPEs) within the Earth, provide unique insights into Earth's interior and heat budget since their first detection in 2005 by KamLAND. Conventional geoneutrino detectors currently provide integrated global information and lack the capability to spatially resolve structures deep within the Earth. Here, we evaluate the ability of angular-sensitive geoneutrino detectors to distinguish between homogeneous and heterogeneous mantle models, focusing on Large Low Shear Velocity Provinces (LLSVPs). Our results show that LLSVPs enriched in Th and U yield a distinct flux of geoneutrinos with distinctive angular patterns. An oceanic site above the Pacific LLSVP is considered a particularly favorable detector location. The Ocean Bottom Detector (OBD) project aims to leverage this spatial resolving advantage by deploying a kiloton-scale liquid scintillator detector directly on the ocean floor, enabling unprecedented sensitivity for mantle geoneutrino detection. These findings demonstrate the critical role of combining geophysical and geochemical data to guide detector site selection, ultimately improving constraints on Earth's internal heat and the HPE distribution.
11 Jun 2026
AG-2026.06-413
physics.geo-ph
Pritom Sarma, Stanislav Parez, Einat Aharonov, Renaud Toussaint
Fluid injection into the Earth's subsurface, performed for energy extraction, waste disposal, and resource development, is known to reactivate gouge-filled faults and induce seismicity, a key hazard in modern geotechnical operations. Nevertheless, the role of injection rate in controlling fault-gouge failure remains poorly understood. Here we present both an analytical theory and coupled fluid--granular (discrete element) numerical simulations to explain this rate dependence. Assuming a pre-stressed gouge-filled fault subject to fluid injection, we derive a pore-pressure diffusion equation with a dilative sink. Its solution predicts a rate-dependent failure criterion, arising from pressure heterogeneity within the layer: slow injection allows pressure to diffuse uniformly throughout the layer, promoting uniform weakening, whereas rapid injection produces strong gradients, leaving distal regions stronger. The numerical simulations confirm the theory and reproduce experimental observations not captured by classical, uniform-pressure effective-stress theory. The framework links grain-scale physics to fault-scale failure and provides quantitative guidance for the design of injection protocols in geotechnical operations involving granular geomaterials.
7 Jun 2026
AG-2025.10-211
physics.geo-ph
Yuxin Yang, Kun Liu, Xuefeng Zhang, Yi-Ming Hu
The measurement of Earth's free oscillations plays an important role in studying the Earth's large-scale structure. Space technology development presents a potential method to observe these normal modes by measuring inter-satellite distances. However, the disturbance from the Earth's low-degree gravity field makes it challenging for low Earth orbit gravity measurement satellites such as Gravity Recovery and Climate Experiment (GRACE) and TianQin-2 to extract signals from Earth's free oscillations directly. Here, we propose that by taking advantage of the high Earth orbit, the TianQin satellites can effectively avoid this disturbance, enabling direct measurement of Earth's free oscillations. We derive an analytical waveform to describe the response of Earth's free oscillations in TianQin. Based on this waveform, we use Bayesian analysis to extract the normal modes from numerical simulation data and perform parameter estimation. Our findings reveal that for a magnitude 7.9, Wenchuan-like earthquake, the resulting free oscillations will generate a signal that signal-to-noise ratio (SNR) is 73 in TianQin, and approximately 9 different modes can be distinguished. This result shows TianQin can open a new window to examine the Earth's free oscillations and study the Earth's interior and earthquakes independently from ground-based gravity measurement.
11 Oct 2025
AG-2025.09-398
physics.geo-ph
Mark P. Panning, Philippe Lognonné, Teviet Creighton, James Trippe, Volker Quetschke, Josipa Majstrorović, Karan Jani
The Laser Interferometer Lunar Antenna (LILA), a concept for measuring sub-Hz gravitational waves on the Moon, would use laser strainmeters to obtain extremely sensitive strain measurements from 1 mHz to 1 Hz. With proposed strain sensitivities, LILA would also be able to measure the normal modes of the Moon from 1-10 mHz at high signal-to-noise ratio. Such measurements would enable significant advances in our understanding of both the spherically symmetric and even 3D deep internal structure of the Moon. Strainmeter measurements may even be able to detect the translational mode of the solid inner core of the Moon at frequencies below 0.1 mHz. Inertial seismometers, on the other hand, are unlikely to reach the performance of $\sim10^{-16}$ m/s$^2$/$\sqrt{\mathrm{Hz}}$ required to reliably detect normal modes below 5-10 mHz, even with optimistic assumptions on future projected performance.
18 Sept 2025
AG-2025.06-529
physics.geo-ph
Mingyue Zhang, Jürgen Müller, Sergei M. Kopeikin
Based on general relativity, clock comparisons enable the determination of the gravity potential relative to a stable reference. Lunar surface clocks, owing to the Moon's low-noise conditions, high orbital stability, and broad Earth visibility, are promising reference clocks for global-scale comparisons between terrestrial clocks. Meanwhile, the need for an independent lunar time system-driven by future lunar navigation-requires maintaining links to terrestrial standards. This Letter simulates fractional frequency differences between Earth (E) and Moon (L) clocks by modeling three key time transformations: proper-to-coordinate time for E-clocks and for L-clocks (both linked to the local gravity potential), and the coordinate time relation between Earth and Moon. Signal propagation effects are not addressed. Gravity potential differences impact observations at the 10^-10 level, and the coordinate time ratio at 10^-11. Contributions from static, tidal, and non-tidal potentials, body self-rotation, and different celestial bodies are evaluated.
19 Jun 2025
AG-2024.12-659
physics.geo-ph
Peng Fei Zhang, Chen Xiang Wang, Li Hong Li, Lei Wang, Zi Yu Shen, Rui Xu, An Ning, Abdelrahim Ruby, Wen-Bin Shen
The China Space Station (CSS) is currently in orbit and carries the high-precision optical atomic clock with stability of approximately $2.0 \times 10^{-15} / \sqrtτ$ in its experiment module. We have developed a model to determine the gravity potential (GP) based on the gravity frequency shift equation and have created both one-way and dual-frequency transfer models up to $c^{-4}$. These models consider effects from the troposphere, ionosphere, and solid Earth tides. The proposed model is suitable for measurements at the magnitude of $10^{-19}$. Based on the CSS mission, we conducted the simulation experiments. The results indicate that when processing the simulation frequency signal using the proposed model, we can obtain the GP with the accuracies of $ (1.13\pm0.71)\,\mathrm{m^2/s^2}$, $ (0.09\pm0.89)\,\mathrm{m^2/s^2}$, and $(0.66\pm1.18)\,\mathrm{m^2/s^2}$ for cutoff elevation angles of $5^{\circ}$, $10^{\circ}$ and $15^{\circ}$, respectively. With the high-precision optical atomic clock onboard the CSS, the proposed model enables us to measure the GP differences in the magnitude of centimeter-level accuracy.
31 Dec 2024
AG-2024.01-2404
physics.geo-ph
Nanzhe Wang, Xiang-Zhao Kong, Dongxiao Zhang
In this study, we present the development and application of the physics-informed convolutional decoder (PICD) framework for inverse modeling of heterogenous groundwater flow. PICD stands out as a direct inversion method, eliminating the need for repeated forward model simulations. The framework leverages both data-driven and physics-driven approaches by integrating monitoring data and domain knowledge (governing equation, boundary conditions, and initial conditions) into the inversion process. PICD utilizes a convolutional decoder to effectively approximate the spatial distribution of hydraulic heads, while Karhunen Loeve expansion (KLE) is employed to parameterize hydraulic conductivities. During the training process, the stochastic vector in KLE and the parameters of the convolutional decoder are adjusted simultaneously, ensuring that the predictions align with available measurements and adhere to domain-specific knowledge. The final optimized stochastic vectors correspond to the estimation of hydraulic conductivities, and the trained convolutional decoder demonstrates the ability to predict the evolution and distribution of hydraulic heads in heterogeneous fields. To validate the effectiveness of the proposed PICD framework, various scenarios of groundwater flow are examined. Results demonstrate the framework's capability to accurately estimate heterogeneous hydraulic conductivities and to deliver satisfactory predictions of hydraulic heads, even with sparse measurements. The proposed PICD framework emerges as a promising tool for efficient and informed groundwater flow inverse modeling.
12 Jan 2024
AG-2024.01-2431
physics.geo-ph
Yuntian Teng, Zihao Li, Cheng Chen
This paper reviews theories, experimental data, and modeling methods for pre-Darcy flow in low-permeability porous media, where Darcy velocity shows nonlinear dependence on pressure gradients at sufficiently low pressures, a deviation from Darcy's law. It begins by explaining the fundamental mechanisms of pre-Darcy flow, focusing on its unique characteristics like non-linear pressure gradients and fluid-rock interactions. Next, the paper compiles experimental studies on low-permeability geomaterials such as tight sandstones, shales, and clays, detailing methodologies employed, including core sample preparation, permeability measurement techniques, and threshold pressure gradient assessments. The experiments' findings, showing how pore geometry, fluid type, and pressure conditions affect pre-Darcy flow onset, are discussed. The review then covers empirical and theoretical models, plus simulation methods developed for interpreting data on pre-Darcy flow. It concludes by highlighting challenges in conducting and interpreting these experiments, suggesting directions for future research. This comprehensive analysis aims to assist those studying fluid dynamics in low-permeability geomaterials and has implications for applications like shale oil and gas recovery, contaminant transport in low-permeability aquifers, and geological nuclear waste disposal.
10 Jan 2024
AG-2024.01-2593
physics.geo-ph
Luke Cullen, Andy W Smith, Asadullah H Galib, Debvrat Varshney, Edward J E Brown, Peter J Chi, Xiangning Chu, Filip Svoboda
Local ionospheric density anomalies have been reported in the days prior to major earthquakes. This global study statistically investigates whether consistent ionospheric anomalies occur in the 24 hours prior to earthquakes across different regions, magnitudes, temporal and spatial scales. We match earthquake data to Total Electron Content (TEC) data from 2000-2020 at a higher resolution and cadence than previous assessed. Globally, no significant, consistent anomaly is found. Regionally, statistically significant ionospheric anomalies arise in the 12 hours prior to earthquakes with $p \leq 0.01$ following Wilcoxon tests. For the Japanese region we find a median negative ionospheric anomaly of around 0.5 TECU between 3 and 8 hours before earthquakes. For the South American region, the median TEC is enhanced by up to ~ 2 TECU, between 7 and 10 hours before an event. We show that the results are robust to different definitions of the ''local'' region and earthquake magnitude. This demonstrates the promise of monitoring the ionosphere as part of a multimodal earthquake forecasting system.
3 Jan 2024
AG-2023.12-1602
physics.geo-ph
Malte Schade, Cyrill Boesch, Vaclav Hapla, Andreas Fichtner
Quantum computing has attracted considerable attention in recent years because it promises speed-ups that conventional supercomputers cannot offer, at least for some applications. Though existing quantum computers are, in most cases, still too small to solve significant problems, their future impact on domain sciences is already being explored now. Within this context, we present a quantum computing concept for 1-D elastic wave propagation in heterogeneous media with two components: a theoretical formulation and an implementation on a real quantum computer. The method rests on a finite-difference approximation, followed by a sparsity-preserving transformation of the discrete elastic wave equation to a Schrödinger equation, which can be simulated directly on a gate-based quantum computer. An implementation on an error-free quantum simulator verifies our approach and forms the basis of numerical experiments with small problems on the real quantum computer IBM Brisbane. The latter produce simulation results that qualitatively agree with the error-free version but are contaminated by quantum decoherence and noise effects. Complementing the discrete transformation to the Schrödinger equation by a continuous version allows the replacement of finite differences by other spatial discretisation schemes, such as the spectral-element method. Anticipating the emergence of error-corrected quantum chips, an analogy between our method and analyses of coupled mass-spring systems suggests that our quantum computing approach may lead to wave field simulations that run exponentially faster than simulations on classical computers.
22 Dec 2023
AG-2023.12-011
physics.geo-ph
Mendez Rios, Jérôme Le Coz, Renard Benjamin, Terraz Théophile
Monitoring water stage and discharge at hydrometric stations is essential for flood characterization and prediction. Continuous measurement is feasible for stage records, whereas discharge must be calculated, typically using a rating curve. Several methods have been developed, such as surface velocity measurement or rating curve methods. Nevertheless, hydrometric stations may be influenced by tidal fluctuations, leading to transient flow conditions that can disrupt the stage-discharge relation, complicating the accurate estimation of discharge. In the case of a quasi-unsteady flow, the dynamic can be managed by a relationship between water level, elevation, and discharge based on the Manning-Strickler formula and measurements of water level and slope of the waterline. However, in unsteady flow, when tidal effects are pronounced, these types of relationships and their variations have proven to be less effective. To capture the complex flow dynamics, including flow reversal, an approach via a 1D hydrodynamic model is proposed. Here, model estimation refers to estimating the posterior distribution of parameters and the structural error model.To set up the model, the cross-sectional geometry, friction coefficient, upstream discharge(s), and downstream water level are necessary. In hydrodynamic modeling, the friction coefficients, often represented through a set of Strickler coefficients, are the main calibration parameter, but manual calibration is difficult due to spatial variations in roughness combined with unsteady flow. Furthermore, understanding and quantifying uncertainties associated with data and the model are an important step in the calibration process. Therefore, automatic calibration of friction coefficients is proposed through Bayesian inference.In terms of numerical tools, the 1D hydrodynamic code used here is Mage, developed by INRAE, which solves the 1D Saint-Venant equations for river flows and transients. However, the proposed method is not specific to a given simulation code: it can be applied to any usual 1D hydrodynamic code. Bayesian calibration is performed using the software BaM! (Bayesian modeling: https://github.com/BaM-tools), which allows specifying prior information on model parameters (in this case, friction coefficients) to then estimate them with associated uncertainties, using observations themselves with their uncertainties (not only water levels but also gauging campaigns).
6 Dec 2023
AG-2023.11-005
physics.geo-ph
Christopher Small, Daniel Sousa
Due to their transient nature, clouds represent anomalies relative to the underlying landscape of interest. Hence, the challenge of cloud identification can be considered a specific case in the more general problem of anomaly detection. The confounding effects of transient anomalies are particularly troublesome for spatiotemporal analysis of land surface processes. Spatiotemporal characterization provides a statistical basis to quantify the most significant temporal patterns and their spatial distributions without the need for a priori assumptions about the form, amplitude or timing of the observed changes. The objective of this study is to implement and evaluate a robust approach to distinguish clouds and other transient anomalies from diurnal and annual thermal cycles observed with time-lapse thermography. The approach uses Robust Principal Component Analysis (RPCA) to statistically distinguish low rank and sparse components of the land surface temperature image time series, followed by a spatiotemporal characterization of the L component time series to quantify the dominant diurnal and annual thermal cycles in the study area. The RPCA effectively segregated clouds, sensor anomalies, swath gaps, geospatial displacements and transient thermal anomalies into the sparse component time series. Spatiotemporal characterization of the low rank component time series clearly resolves a variety of diurnal and annual thermal cycles for different land covers and water bodies.
28 Nov 2023
AG-2015.06-1475
physics.geo-ph
G. Hellio, N. Gillet, C. Bouligand, D. Jault
SUMMARY We report a new method to infer continuous time series of the declination, inclination and intensity of the magnetic field from archeomagnetic data. Adopting a Bayesian perspective, we need to specify a priori knowledge about the time evolution of the magnetic field. It consists in a time correlation function that we choose to be compatible with present knowledge about the geomagnetic time spectra. The results are presented as distributions of possible values for the declination, inclination or intensity. We find that the methodology can be adapted to account for the age uncertainties of archeological artefacts and we use Markov Chain Monte Carlo to explore the possible dates of observations. We apply the method to intensity datasets from Mari, Syria and to intensity and directional datasets from Paris, France. Our reconstructions display more rapid variations than previous studies and we find that the possible values of geomagnetic field elements are not necessarily normally distributed. Another output of the model is better age estimates of archeological artefacts.
19 Jun 2015
AG-2015.06-1483
physics.geo-ph
Jochen E. Wagner, Marcello Petitta
In this paper the practical approach to evaluate the incoming solar radiation on buildings based on atmospheric composition and cloud cover is presented. The effects of absorption and scattering due to atmospheric composition is taken into account to calculate, using radiative transfer models, the net incoming solar radiation at surface level. A specific validation of the Alpine Region in Europe is presented with a special focus on the region of South Tyrol.
19 Jun 2015
AG-2015.06-1127
physics.geo-ph
Sumiyoshi Abe, Norikazu Suzuki
Volcanic seismicity at Mt. Etna is studied. It is found that the associated stochastic process exhibits a subdiffusive phenomenon. The jump probability distribution well obeys an exponential law, whereas the waiting-time distribution follows a power law in a wide range. Although these results would seem to suggest that the phenomenon could be described by temporally-fractional kinetic theory based on the viewpoint of continuous-time random walks, the exponent of the power-law waiting-time distribution actually lies outside of the range allowed in the theory. In addition, there exists the aging phenomenon in the event-time averaged mean squared displacement, in contrast to the picture of fractional Brownian motion. Comments are also made on possible relevances of random walks on fractals as well as nonlinear kinetics. Thus, problems of volcanic seismicity are highly challenging for science of complex systems.
16 Jun 2015
AG-2015.06-702
physics.geo-ph
Virginia Strati, Marica Baldoncini, Ivan Callegari, Fabio Mantovani, William F. McDonough, Barbara Ricci, Gerti Xhixha
Constraints on the Earth's composition and on its radiogenic energy budget come from the detection of geoneutrinos. The KamLAND and Borexino experiments recently reported the geoneutrino flux, which reflects the amount and distribution of U and Th inside the Earth. The KamLAND and Borexino experiments recently reported the geoneutrino flux, which reflects the amount and distribution of U and Th inside the Earth. The JUNO neutrino experiment, designed as a 20 kton liquid scintillator detector, will be built in an underground laboratory in South China about 53 km from the Yangjiang and Taishan nuclear power plants. Given the large detector mass and the intense reactor antineutrino flux, JUNO aims to collect high statistics antineutrino signals from reactors but also to address the challenge of discriminating the geoneutrino signal from the reactor background.The predicted geoneutrino signal at JUNO is 39.7 $^{+6.5}_{-5.2}$ TNU, based on the existing reference Earth model, with the dominant source of uncertainty coming from the modeling of the compositional variability in the local upper crust that surrounds (out to $\sim$ 500 km) the detector. A special focus is dedicated to the 6° x 4° Local Crust surrounding the detector which is estimated to contribute for the 44% of the signal. On the base of a worldwide reference model for reactor antineutrinos, the ratio between reactor antineutrino and geoneutrino signals in the geoneutrino energy window is estimated to be 0.7 considering reactors operating in year 2013 and reaches a value of 8.9 by adding the contribution of the future nuclear power plants. In order to extract useful information about the mantle's composition, a refinement of the abundance and distribution of U and Th in the Local Crust is required, with particular attention to the geochemical characterization of the accessible upper crust.
10 Jun 2015
AG-2015.06-632
physics.geo-ph
Mihai Bondarescu, Ruxandra Bondarescu, Philippe Jetzer, Andrew Lundgren
Modern optical atomic clocks along with the optical fiber technology currently being developed can measure the geoid, which is the equipotential surface that extends the mean sea level on continents, to a precision that competes with existing technology. In this proceeding, we point out that atomic clocks have the potential to not only map the sea level surface on continents, but also look at variations of the geoid as a function of time with unprecedented timing resolution. The local time series of the geoid has a plethora of applications. These include potential improvement in the predictions of earthquakes and volcanoes, and closer monitoring of ground uplift in areas where hydraulic fracturing is performed.
9 Jun 2015
AG-2015.06-559
physics.geo-ph
M. Lasbleis, R. Deguen, P. Cardin, S. Labrosse
Seismic studies indicate that the Earth's inner core has a complex structure and exhibits a strong elastic anisotropy with a cylindrical symmetry. Among the various models which have been proposed to explain this anisotropy, one class of models considers the effect of the Lorentz force associated with the magnetic field diffused within the inner core. In this paper we extend previous studies and use analytical calculations and numerical simulations to predict the geometry and strength of the flow induced by the poloidal component of the Lorentz force in a neutrally or stably stratified growing inner core, exploring also the effect of different types of boundary conditions at the inner core boundary (ICB). Unlike previous studies, we show that the boundary condition that is most likely to produce a significant deformation and seismic anisotropy is impermeable, with negligible radial flow through the boundary. Exact analytical solutions are found in the case of a negligible effect of buoyancy forces in the inner core (neutral stratification), while numerical simulations are used to investigate the case of stable stratification. In this situation, the flow induced by the Lorentz force is found to be localized in a shear layer below the ICB, which thickness depends on the strength of the stratification, but not on the magnetic field strength. We obtain scaling laws for the thickness of this layer, as well as for the flow velocity and strain rate in this shear layer as a function of the control parameters, which include the magnitude of the magnetic field, the strength of the density stratification, the viscosity of the inner core, and the growth rate of the inner core. We find that the resulting strain rate is probably too small to produce significant texturing unless the inner core viscosity is smaller than about $10^{12}$ Pa.s.
8 Jun 2015
AG-2015.06-064
physics.geo-ph
August Lau, Chuan Yin
The goal of inversion is to estimate the model which generates the data of observations with a specific modeling equation. One general approach to inversion is to use optimization methods which are algebraic in nature to define an objective function. This is the case for objective functions like minimizing RMS of amplitude, residual traveltime error in tomography, cross correlation and sometimes mixing different norms (e.g. L1 of model + L2 of RMS error). Algebraic objective function assumes that the optimal solution will come up with the correct geometry. It is sometimes difficult to understand how one number (error of the fit) could miraculously come up with the detail geometry of the earth model. If one models the earth as binary rock parameters (only two values for velocity variation), one could see that the geometry of the rugose boundaries of the geobodies might not be solvable by inversion using algebraic objective function.
1 Jun 2015
AG-2015.05-2118
physics.geo-ph
A. Oya, H. H. Bui, N. Hiraoka, M. Fujimoto, R. Fukagawa
The Saigon River, which flows through the center of Ho Chi Minh City, is of critical importance for the development of the city as forms as the main water supply and drainage channel for the city. In recent years, riverbank erosion and failures have become more frequent along the Saigon River, causing flooding and damage to infrastructures near the river. A field investigation and numerical study has been undertaken by our research group to identify factors affecting the riverbank failure. In this paper, field investigation results obtained from multiple investigation points on the Saigon River are presented, followed by a comprehensive coupled finite element analysis of riverbank stability when subjected to river water level fluctuations. The river water level fluctuation has been identified as one of the main factors affecting the riverbank failure, i.e. removal of the balancing hydraulic forces acting on the riverbank during water drawdown.
25 May 2015
AG-2015.05-2503
physics.geo-ph
Hidetsugu Sakaguchi, Kazuki Okamura
A modified Carlson-Langer model for earthquakes is proposed, which includes nonlinear visco-elasticity. Several aftershocks are generated after the main shock owing to the damping of the additional visco-elastic force. Both the Gutenberg-Richter law and Omori's law are reproduced in a numerical simulation of the modified Carlson-Langer model on a critical percolation cluster of a square lattice.
9 May 2015
AG-2015.05-595
physics.geo-ph
Liu Jiawei, Yong Wen-An
This work is concerned with the Biot/squirt (BISQ) models for wave propagation in saturated porous media. We show that the models allow exponentially exploding solutions, as time goes to infinity, when the characteristic squirt-flow coefficient is negative or has a non-zero imaginary part. We also show that the squirt-flow coefficient does have non-zero imaginary parts for some experimental parameters. Because the models are linear, the existence of such exploding solutions indicates instability of the BISQ models. This result calls on a reconsideration of the widely used BISQ theory. Furthermore, we demonstrate that the 3D isotropic BISQ model is stable when the squirt-flow coefficient is positive. In particular, the original Biot model is unconditionally stable where the squirt-flow coefficient is 1.
9 May 2015
AG-2015.04-1813
physics.geo-ph
Naum I. Gershenzon, Mohamad Reza Soltanian, Robert W. Ritzi, David F. Dominic, Don Keefer, Eric Shaffer, Brynne Storsved
We studied the effects on oil sweep efficiency of the proportion, hierarchical organization, and connectivity of high-permeability open-framework conglomerate (OFC) cross-sets within the multi-scale stratal architecture found in fluvial deposits. Utilizing numerical simulations and the RVA/Paraview open-source visualization package, we analyzed oil production rate, water breakthrough time, and spatial and temporal distribution of residual oil saturation. The effective permeability of the reservoir exhibits large-scale anisotropy created by the organization of OFC cross-sets within unit bars, and the organization of unit bars within compound bars. As a result oil sweep efficiency critically depends on the direction of the pressure gradient. When pressure gradient is oriented normal to paleoflow direction, the total oil production and the water breakthrough time are larger, and remaining oil saturation is smaller. This result is found regardless of the proportion or connectivity of the OFC cross-sets, within the ranges examined. Contrary to expectations, the total amount of trapped oil due to the effect of capillary trapping does not depend on the pressure gradient within the examined range. Hence the pressure difference between production and injection wells does not affect sweep efficiency, although the spatial distribution of oil remaining in the reservoir depends on this value. Whether or not clusters of connected OFC span the domain does not affect sweep efficiency, only the absolute rate of oil production. The RVA/Paraview application allowed us to visualize and examine these non-intuitive results.
28 Apr 2015
AG-2015.04-1320
physics.geo-ph
Céline Guervilly, Philippe Cardin, Nathanaël Schaeffer
We present a dynamo mechanism arising from the presence of barotropically unstable zonal jet currents in a rotating spherical shell. The shear instability of the zonal flow develops in the form of a global Rossby mode, whose azimuthal wavenumber depends on the width of the zonal jets. We obtain self-sustained magnetic fields at magnetic Reynolds numbers greater than 1000. We show that the propagation of the Rossby waves is crucial for dynamo action. The amplitude of the axisymmetric poloidal magnetic field depends on the wavenumber of the Rossby mode, and hence on the width of the zonal jets. We discuss the plausibility of this dynamo mechanism for generating the magnetic field of the giant planets. Our results suggest a possible link between the topology of the magnetic field and the profile of the zonal winds observed at the surface of the giant planets. For narrow Jupiter-like jets, the poloidal magnetic field is dominated by an axial dipole whereas for wide Neptune-like jets, the axisymmetric poloidal field is weak.
22 Apr 2015
AG-2015.04-2217
physics.geo-ph
Kai Gao, Shubin Fu, Richard L. Gibson, Eric T. Chung, Yalchin Efendiev
It is important to develop fast yet accurate numerical methods for seismic wave propagation to characterize complex geological structures and oil and gas reservoirs. However, the computational cost of conventional numerical modeling methods, such as finite-difference method and finite-element method, becomes prohibitively expensive when applied to very large models. We propose a Generalized Multiscale Finite-Element Method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media, where we construct basis functions from multiple local problems for both the boundaries and interior of a coarse node support or coarse element. The application of multiscale basis functions can capture the fine scale medium property variations, and allows us to greatly reduce the degrees of freedom that are required to implement the modeling compared with conventional finite-element method for wave equation, while restricting the error to low values. We formulate the continuous Galerkin and discontinuous Galerkin formulation of the multiscale method, both of which have pros and cons. Applications of the multiscale method to three heterogeneous models show that our multiscale method can effectively model the elastic wave propagation in anisotropic media with a significant reduction in the degrees of freedom in the modeling system.
18 Apr 2015
AG-2015.04-1034
physics.geo-ph
D. R. Tunuguntla, T. Weinhart, A. R. Thornton, O. Bokhove
We consider dry granular flow down an inclined chute with a localised contraction theoretically and numerically. The flow regimes are predicted through a novel extended one-dimensional hydraulic theory. A discrete particle method validated empirical constitutive law is used to close this one-dimensional asymptotic model. The one-dimensional model is verified by solving the two-dimensional shallow granular equations through discontinuous Galerkin finite element method (DGFEM). For supercritical flows, the one-dimensional asymptotic theory surprisingly holds although the two-dimensional oblique granular jumps largely vary across the converging channel.
17 Apr 2015
AG-2015.04-341
physics.geo-ph
Francois Louchet
Snow slab avalanche release usually results from failure of weak layers made of loose ice crystals. In previous field experiments, we evidenced for the first time an interesting stress-driven transition in the weak layer between a granular fluid and a solid phase. We propose here an original model involving the kinetics of ice grains bonds failure and reconstruction. The model evidences a sudden transition between two drastically different types of weak layer behaviors. It accounts for the characteristics of both the studied fluid-solid transition and for slab avalanche release observations. It may possibly apply to a number of other granular materials.
7 Apr 2015
AG-2015.04-323
physics.geo-ph
John Scoville
Spectroscopically measuring low levels of non-equilibrium phenomena (e.g. emission in the presence of a large thermal background) can be problematic due to an unfavorable signal-to-noise ratio. An approach is presented to use time-series spectroscopy to separate non-equilibrium quantities from slowly varying equilibria. A stochastic process associated with the non-equilibrium part of the spectrum is characterized in terms of its central moments or cumulants, which may vary over time. This parameterization encodes information about the non-equilibrium behavior of the system. Stochastic time-series spectroscopy (STSS) can be implemented at very little expense in many settings since a series of scans are typically recorded in order to generate a low-noise averaged spectrum. Higher moments or cumulants may be readily calculated from this series, enabling the observation of quantities that would be difficult or impossible to determine from an average spectrum or from prinicipal components analysis (PCA). This method is more scalable than PCA, having linear time complexity, yet it can produce comparable or superior results, as shown in example applications. One example compares an STSS-derived CO$_2$ bending mode to a standard reference spectrum and the result of PCA. A second example shows that STSS can reveal conditions of stress in rocks, a scenario where traditional methods such as PCA are inadequate. This allows spectral lines and non-equilibrium behavior to be precisely resolved. A relationship between 2nd order STSS and a time-varying form of PCA is considered. Although the possible applications of STSS have not been fully explored, it promises to reveal information that previously could not be easily measured, possibly enabling new domains of spectroscopy and remote sensing.
6 Apr 2015
AG-2015.03-607
physics.geo-ph
Giancarlo Scalera
In the expanding Earth framework it is possible to find additional phenomena that could contribute in a proper way to the water balance and general tectonic eustatism involved in the sea lever rising. Recent compilations seems to leave unexplained up to 12 cm/century of sea rising, and possible solutions invoking a polar ice shells melting near to the upper limit of the error bars reveal in conflict with the consequent expected decreasing of the Earth angular velocity. It is shown that taking into account possible effects of an expanding Earth, the problem can be initiated towards an appropriate solution, at least as regards the just orders of magnitude. Major effects on sea-level could come from ongoing relaxation of curvature variations that are peculiar for an expanding globe.
9 Mar 2015
AG-2015.03-347
physics.geo-ph
J. Quinn Norris, Donald L. Turcotte, John B. Rundle
Injections of large volumes of water into tight shale reservoirs allows the extraction of oil and gas not previously accessible. This large volume "super" fracking induces damage that allows the oil and/or gas to flow to an extraction well. The purpose of this paper is to provide a model for understanding super fracking. We assume that water is injected from a small spherical cavity into a homogeneous elastic medium. The high pressure of the injected water generates hoop stresses that reactivate natural fractures in the tight shales. These fractures migrate outward as water is added creating a spherical shell of damaged rock. The porosity associated with these fractures is equal to the water volume injected. We obtain an analytic expression for this volume. We apply our model to a typical tight shale reservoir and show that the predicted water volumes are in good agreement with the volumes used in super fracking.
5 Mar 2015
AG-2015.03-244
physics.geo-ph
H. H. Bui, G. D. Nguyen, J. Kodikara, M. Sanchez
The presence of desiccation cracks in soils can significantly alter their mechanical and hydrological properties. In many circumstances, desiccation cracking in soils can cause significant damage to earthen or soil supported structures. For example, desiccation cracks can act as the preference path way for water flow, which can facilitate seepage flow causing internal erosion inside earth structures. Desiccation cracks can also trigger slope failures and landslides. Therefore, developing a computational procedure to predict desiccation cracking behaviour in soils is vital for dealing with key issues relevant to a range of applications in geotechnical and geo-environment engineering. In this paper, the smoothed particle hydrodynamics (SPH) method will be extended for the first time to simulate shrinkage-induced soil cracking. The main objective of this work is to examine the performance of the proposed numerical approach in simulating the strong discontinuity in material behaviour and to learn about the crack formation in soils, looking at the effects of soil thickness on the cracking patterns. Results show that the SPH is a promising numerical approach for simulating crack formation in soils
4 Mar 2015
AG-2015.02-1891
physics.geo-ph
Leonid Petrov
The International Mass Loading Service computes four loadings: a) atmospheric pressure loading; b) land water storage loading; c) oceanic tidal loading; and d) non-tidal oceanic loading. The service provides to users the mass loading time series in three forms: 1) pre-computed time series for a list of 849 space geodesy stations; 2) pre-computed time series on the global 1deg x 1deg grid; and 3) on-demand Internet service for a list of stations and a time range specified by the user. The loading displacements are provided for the time period from 1979.01.01 through present, updated on an hourly basis, and have latencies 8-20 hours.
28 Feb 2015
AG-2015.02-1642
physics.geo-ph
Leonardo B. Monachesi, J. German Rubino, Marina Rosas-Carbajal, Damien Jougnot, Niklas Linde, Beatriz Quintal, Klaus Holliger
The presence of mesoscopic heterogeneities in fluid-saturated porous rocks can produce measurable seismoelectric signals due to wave-induced fluid flow between regions of differing compressibility. The dependence of these signals on the petrophysical and structural characteristics of the probed rock mass remains largely unexplored. In this work, we derive an analytical solution to describe the seismoelectric response of a rock sample, containing a horizontal layer at its center, that is subjected to an oscillatory compressibility test. We then adapt this general solution to compute the seismoelectric signature of a particular case related to a sample that is permeated by a horizontal fracture located at its center. Analyses of the general and particular solutions are performed to study the impact of different petrophysical and structural parameters on the seismoelectric response. We find that the amplitude of the seismoelectric signal is directly proportional to the applied stress, to the Skempton coefficient contrast between the host rock and the layer, and to a weighted average of the effective excess charge of the two materials. Our results also demonstrate that the frequency at which the maximum electrical potential amplitude prevails does not depend on the applied stress or the Skempton coefficient contrast. In presence of strong permeability variations, this frequency is rather controlled by the permeability and thickness of the less permeable material. The results of this study thus indicate that seismoelectric measurements can potentially be used to estimate key mechanical and hydraulic rock properties of mesoscopic heterogeneities, such as compressibility, permeability, and fracture compliance.
25 Feb 2015
AG-2015.02-1533
physics.geo-ph
P. Wassmer, C. Gomez, D. E. Hart, T. Hiraishi, R. Azuma, B. Koenig, M. Trautmann
Sedimentary records of tsunamis are a precious tool to assess the occurrence of past events, as attested by an abundant literature, which has seen a particular 'boom' in the aftermath of the 2004 Indian Ocean tsunami and the 2011 Tohoku tsunami. Despite an extensive literature, there is very little to no understanding of the role that the changing coastal environment is playing on the record of a tsunami, and for a given location, it is still unclear whether the largest tsunamis leave the largest amount of deposits. To research this question, the present study took place in Japan, in the Tohoku Region at Agawa-pond, because the pond act as a sediment trap. Using a sediment-slicer, a 1 m thick deposit was retrieved, from which 4 tsunami sequences were identified, including the latest 2011 tsunami. Using a series of sedimentary proxies: the AMS (Anisotropy of Magnetic Susceptibility), grain size analysis, quartz morphoscopy (morphology and surface characteristics) and the analysis of microfossils, disparities between the tsunami deposits were identified and most importantly a clear thinning of the tsunami deposit towards the top. Provided the present evidences, the authors discuss that the upward fining is due to at least two components that are seldom assessed in tsunami research (1) a modification of the depositional environment, with the progressive anthropization of the coast, providing less sediments to remobilize; and (2) a progressive filling of the Agawa pond, which progressively loses its ability to trap tsunami materials.
24 Feb 2015
AG-2015.02-1125
physics.geo-ph
Friedemann T. Freund, Minoru M. Freund
Though ubiquitous in minerals of igneous and high-grade metamorphic rocks, peroxy defects have been widely overlooked in the past. The charge carriers of interest are positive holes, chemically equivalent to O$^-$ in a matrix of O$^{2-}$, physically defect electrons in the O$^{2-}$ sublattice, highly mobile, able to propagate fast and far. O$^-$ are oxidized relative to O$^{2-}$. As such O$^-$ are not supposed to exist in minerals and rocks that come from deep within the Earth crust or upper mantle, where the environments are overwhelmingly reduced. In order to understand how peroxy defects are introduced, we look at peroxy defects in a crystallographically and compositionally well characterized model system: single crystals of nominally high-purity MgO, grown from the melt under highly reducing conditions. During crystallization the MgO crystals incorporate OH$^-$ through dissolution of traces of H$_2$O into the MgO matrix, leading to a solid solution (ss) Mg$_{1-δ}$(OH)$_{2δ}$O$_{1-2δ}$, where $δ$ <1. During cooling, ss turns into a metastable supersaturated solid solution (sss). During further cooling, OH$^-$ pairs at Mg$^{2+}$ vacancy sites rearrange their electrons, undergoing a redox conversion, which leads to peroxy anions, O$_2^{2-}$, plus molecular H$_2$. Being diffusively mobile, the H$_2$ can leave their Mg$^{2+}$ vacancy sites, leaving behind cation-deficient Mg$_{1-δ}$O. During reheating O$_2^{2-}$ break up, releasing positive hole charge carriers, which affect the electrical conductivity behavior. In rocks, similar changes in the electrical conductivity are observed in the temperature window, where peroxy defects of the type O$_3$Si-OO-SiO$_3$ break up. They release positive holes, which control the electrical conductivity response along the geotherm.
17 Feb 2015
AG-2015.02-994
physics.geo-ph
Michael E. Levinshtein, Valentin A. Dergachev, Alexander P. Dmitriev, Pavel M. Shmakov
Paleo-Sciences including palaeoclimatology and palaeoecology have accumulated numerous records related to climatic changes. The researchers have usually tried to identify periodic and quasi-periodic processes in these paleoscientific records. In this paper, we show that this analysis is incomplete. As follows from our results, random processes, namely processes with a single-time-constant (noise with a Lorentzian noise spectrum), play a very important and, perhaps, a decisive role in numerous natural phenomena. For several of very important natural phenomena the characteristic time constants are very similar and equal to (5-8)x10^3 years. However, this value is not universal. For example, the spectral density fluctuations of the atmospheric radiocarbon 14C are characterized by a Lorentzian with time constant 300 years. The frequency dependence of spectral density fluctuations for benthic 18O records contains two Lorentzians with time constans 8000 years and > 105 years.
16 Feb 2015
AG-2015.02-494
physics.geo-ph
John Scoville, Jaufray Sornette, Friedemann Freund
Understanding the electrical properties of rocks is of fundamental interest. We report on currents generated when stresses are applied. Loading the center of gabbro tiles, 30x30x0.9 cm$^3$, across a 5 cm diameter piston, leads to positive currents flowing from the center to the unstressed edges. Changing the constant rate of loading over 5 orders of magnitude from 0.2 kPa/s to 20 MPa/s produces positive currents, which start to flow already at low stress levels, <5 MPa. The currents increase as long as stresses increase. At constant load they flow for hours, days, even weeks and months, slowly decreasing with time. When stresses are removed, they rapidly disappear but can be made to reappear upon reloading. These currents are consistent with the stress-activation of peroxy defects, such as O$_3$Si-OO-SiO$_3$, in the matrix of rock-forming minerals. The peroxy break-up leads to positive holes h$^{\bullet}$, i.e. electronic states associated with O$^-$ in a matrix of O$^{2-}$, plus electrons, e'. Propagating along the upper edge of the valence band, the holes are able to flow from stressed to unstressed rock, traveling fast and far by way of a phonon-assisted electron hopping mechanism using energy levels at the upper edge of the valence band. Impacting the tile center leads to h$^{\bullet}$ pulses, 4-6 ms long, flowing outward at ~100 m/sec at a current equivalent to 1-2 x 10$^9$ A/km$^3$. Electrons, trapped in the broken peroxy bonds, are also mobile, but only within the stressed volume.
8 Feb 2015
AG-2015.02-445
physics.geo-ph
Lin Zhu, Zhenxue Dai, Huili Gong, Carl Gable, Pietro Teatini
Understanding the heterogeneity arising from the complex architecture of sedimentary sequences in alluvial fans is challenging. This paper develops a statistical inverse framework in a multi-zone transition probability approach for characterizing the heterogeneity in alluvial fans. An analytical solution of the transition probability matrix is used to define the statistical relationships among different hydrofacies and their mean lengths, integral scales, and volumetric proportions. A statistical inversion is conducted to identify the multi-zone transition probability models and estimate the optimal statistical parameters using the modified Gauss-Newton-Levenberg-Marquardt method. The Jacobian matrix is computed by the sensitivity equation method, which results in an accurate inverse solution with quantification of parameter uncertainty. We use the Chaobai River alluvial fan in the Beijing Plain, China, as an example for elucidating the methodology of alluvial fan characterization. The alluvial fan is divided into three sediment zones. In each zone, the explicit mathematical formulations of the transition probability models are constructed with optimized different integral scales and volumetric proportions. The hydrofacies distributions in the three zones are simulated sequentially by the multi-zone transition probability-based indicator simulations. The result of this study provides the heterogeneous structure of the alluvial fan for further study of flow and transport simulations.
7 Feb 2015
AG-2015.02-247
physics.geo-ph
Rolf Sidler
A method to estimate phase velocity and attenuation of acoustic waves in the presence of liquid water in a snowpack is presented. The method is based on Biot's theory of wave propagation in porous materials. Empirical relations and a priori information is used to characterize snow as a porous material as a function of porosity. Plane wave theory and an equivalent pore fluid are used to solve Biot's differential equations and to asses the impact of the air and water in the pore space. The liquid water in the pore space of a snow pack reduces the velocity of the first compressional wave by roughly 300 m/s for every 0.1 increase in liquid water saturation. Also the attenuation of the compressional waves is increased with increasing liquid water content. Two end member models for compaction are evaluated to asses the importance of an independent density measurement for an estimate of liquid pore water saturation in snow with acoustic waves. The two end members correspond to no compaction at all and to a melting sphere packing where the grains remain in contact. The change of velocity for the first compressional wave was found to strongly depend on the compaction model, while the velocity of the second compressional wave mainly depends on liquid water saturation. Also the attenuation for both compressional waves depends mainly on the liquid water saturation and only little on the compaction model. Finally, a simple field experiment illustrates the potential use of the method to estimate the liquid water content of snow with acoustic sensors.
4 Feb 2015
AG-2015.01-1708
physics.geo-ph
Giancarlo Scalera
The different slope of the Wadati-Benioff zones oriented towards east and west is considered a main asymmetry of the Earth's globe. Under the Americas they have angles of about 30o, while under the Pacific east coasts (Asia, Japan) the angles are steeper. In the framework of plate tectonics geodynamics the cause of this difference can be identified in the tidal drag that would cause a global shift of the lithosphere towards west. But this solution has been many times criticized on the basis of the irrelevance of the tidal forces with respect to viscous friction. Instead, it is possible to show that in a different framework, in which sudden extrusions of mantle materials occur by local phase change toward a more unpacked lattice, the value of the Coriolis fictitious force can rise of several magnitude orders, becoming the main cause of the east-west asymmetry of the Wadati-Benioff zones, which might be ascribed entirely to internal causes of the planet (its rotation and geodynamics) and not to external causes (influence of other celestial bodies). Some astrogeodetic clues supporting the new geodynamic scenario are scrutinized.
28 Jan 2015
AG-2015.01-1603
physics.geo-ph
Dikun Yang
This paper presents a new method of constructing physical models in a geophysical inverse problem, when there are only a few possible physical property values in the model and they are reasonably known but the geometry of the target is sought. The model consists of a fixed background and many small "particles" as building blocks that float around in the background to resemble the target by clustering. This approach contrasts the conventional geometric inversions requiring the target to be regularly shaped bodies, since here the geometry of the target can be arbitrary and does not need to be known beforehand. Because of the lack of resolution in the data, the particles may not necessarily cluster when recovering compact targets. A model norm, called distribution norm, is introduced to quantify the spread of particles and incorporated into the objective function to encourage further clustering of the particles. As proof of concept, 1D magnetotelluric inversion is used as example. My experiments reveal that the particles, starting from a fully scattered distribution, are able to move towards the actual target location; the quality of recovery depends on whether there is enough material (vertical conductance in 1D) in the particles to build the target; and the use of distribution norm can help produce tightened clustering. When the inversion struggles to fit the data, it may indicate that the prior information about the particles' conductivity and size are incorrect.
27 Jan 2015
AG-2015.01-1655
physics.geo-ph
E. A. Boyarsky, L. F. Vitushkin, M. D. Gerasimenko, G. V. Demianov, M. B. Kaufman, V. I. Kaftan, E. M. Mazurova, Z. M. Malkin, S. M. Molodenskii, Yu. M. Neyman, A. K. Pevnev, V. P. Savinykh, G. M. Steblov, S. K. Tatevian, S. A. Tolchel'nikova, N. V Shestakov
This report submitted to the International Association of Geodesy (IAG) of the International Union of Geodesy and Geophysics (IUGG) contains results obtained by Russian geodesists in 2007-2010. In the report prepared for the XXV General Assembly of IUGG (Australia, Melbourne, 28 June - 7 July 2011), the results of principal researches in geodesy, geodynamics, gravimetry, in the studies of geodetic reference frame creation and development, Earth's shape and gravity field, Earth's rotation, geodetic theory, its application and some other directions are briefly described. The period from 2007 to 2010 was still difficult for Russian geodesy mainly due to the permanent reformation of state geodetic administration as well as state education structure and organization. The report is organized as a sequence of abstracts of principal publications and presentations for symposia, conferences, workshops, etc. Each of the report paragraphs includes a list of scientific papers published in 2007-2010 including those prepared in cooperation of Russian scientists and their colleagues from other countries. Some interesting international and national scientific events are reflected in the text too. For some objective reasons not all results obtained by Russian scientists on the problems of geodesy are included in the report.
26 Jan 2015
AG-2015.01-1515
physics.geo-ph
Nicolas Coppo, Jean-Michel Baltassat, Jean-François Girard, Pierre Wawrzyniak, Sophie Hautot, Pascal Tarits, Thomas Jacob, Guillaume Martelet, Francis Mathieu, Alain Gadalia, Vincent Bouchot, Hervé Traineau
Within the framework of a global French program oriented towards the development of renewable energies, Martinique Island (Lesser Antilles, France) has been extensively investigated (from 2012 to 2013) through an integrated multi-methods approach, with the aim to define precisely the potential geothermal ressources, previously highlighted (Sanjuan et al., 2003). Amongst the common investigation methods deployed, we carried out three magnetotelluric (MT) surveys located above three of the most promising geothermal fields of Martinique, namely the Anses d'Arlet, the Montagne Pel{é}e and the Pitons du Carbet prospects. A total of about 100 MT stations were acquired showing single or multi-dimensional behaviors and static shift effects. After processing data with remote reference, 3-D MT inversions of the four complex elements of MT impedance tensor without pre-static-shift correction, have been performed for each sector, providing three 3-D resistivity models down to about 12 to 30 km depth. The sea coast effect has been taken into account in the 3-D inversion through generation of a 3-D resistivity model including the bathymetry around Martinique from the coast up to a distance of 200 km. The forward response of the model is used to calculate coast effect coefficients that are applied to the calculated MT response during the 3-D inversion process for comparison with the observed data. 3-D resistivity models of each sector, which are inherited from different geological history, show 3-D resistivity distribution and specificities related to its volcanological history. In particular, the geothermal field related to the Montagne Pel{é}e strato-volcano, is characterized by a quasi ubiquitous conductive layer and quite monotonic typical resistivity distribution making interpretation difficult in terms of geothermal targets. At the opposite, the resistivity distribution of Anse d'Arlet area is radically different and geothermal target is thought to be connected to a not so deep resistive intrusion elongated along a main structural axis. Beside these interesting deep structures, we demonstrate, after analyzing the results of the recent heliborne TEM survey covering the whole Martinique, that surface resistivity distribution obtained from 3-D inversion reproduce faithfully the resistivity distribution observed by TEM. In spite of a very different sampling scale, this comparison illustrates the ability of 3-D MT inversion to take into account and reproduce static shift effects in the sub-surface resistivity distribution.
26 Jan 2015
AG-2015.01-2677
physics.geo-ph
G. Molchan
Recently A. Gusev suggested and numerically investigated the doubly stochastic earthquake source model. The model is supposed to demonstrate the following features in the far-field body waves: 1) the omega-square high-frequency (HF) behavior of displacement spectra; 2) lack of the directivity effect in HF radiation; and 3) a stochastic nature of the HF signal component. The model involves two stochastic elements: the local stress drop (SD) on a fault and the rupture time function (RT) with a linear dominant component. The goal of the present study is to investigate the Gusev model theoretically and to find conditions for (1, 2) to be valid and stable relative to receiver site. The models with smooth elements SD, RT are insufficient for these purposes. Therefore SD and RT are treated as realizations of stochastic fields of the fractal type. The local smoothness of such fields is characterized by the fractional (Hurst) exponent H, 0 < H < 1. This allows us to consider a wide class of stochastic functions without regard to their global spectral properties. We show that the omega-square behavior of the model is achieved approximately if the rupture time function is almost regular (H~1) while the stress drop is rough function of any index H. However, if the rupture front is linear, the local stress drop has to be function of minimal smoothness (H~0). The situation with the directivity effect is more complicated: for different RT models with the same fractal index, the effect may or may not occur. The nature of the phenomenon is purely analytical. The main controlling factor for the directivity is the degree of smoothness of the two dimensional distributions of RT random function. For this reason the directivity effect is unstable. This means that in practice the opposite conclusions relative to the statistical significance of the directivity effect are possible
22 Jan 2015
AG-2015.01-2736
physics.geo-ph
Xing Wei, Rainer Arlt, Andreas Tilgner
We investigate numerically the self-sustained dynamo action in a spinning sphere whose sense of rotation reverses periodically. This system serves as a simple model of a dynamo in small bodies powered by frequent collisions. It is found that dynamo action is possible in some intervals of collision rates. At high Ekman numbers the laminar spin-up flow is helical in the boundary layers and the Ekman circulation together with the azimuthal shear powers the dynamo action. At low Ekman number a non-axisymmetric instability helps the dynamo action. The intermittency of magnetic field occurs at low Ekman number.
22 Jan 2015
AG-2015.01-565
physics.geo-ph
Damien Jougnot, Niklas Linde, Eline B. Haarder, Majken C. Looms
The self-potential (SP) method is sensitive to water fluxes in saturated and partially saturated porous media, such as those associated with rainwater infiltration and groundwater recharge. We present a field-based study at the Voulund agricultural test site, Denmark, that is, to the best of our knowledge, the first to focus on the vertical self-potential distribution prior to and during a saline tracer test. A coupled hydrogeophysical modeling framework is used to simulate the SP response to precipitation and saline tracer infiltration. A layered hydrological model is first obtained by inverting dielectric and matric potential data. The resulting model that compares favorably with electrical resistance tomography models is subsequently used to predict the SP response. The electrokinetic contribution (caused by water fluxes in a charged porous soil) is modeled by an effective excess charge approach that considers both water saturation and pore water salinity. Our results suggest that the effective excess charge evolution prior to the tracer injection is better described by a recent flux-averaged model based on soil water retention functions than by a previously proposed volume-averaging model. This is the first time that raw vertically distributed SP measurements have been explained by a physically based model. The electrokinetic contribution cannot alone reproduce the SP data during the tracer test and an electro-diffusive contribution (caused by concentration gradients) is needed. The predicted amplitude of this contribution is too small to perfectly explain the data, but the shape is in accordance with the field data. This discrepancy is attributed to imperfect descriptions of electro-diffusive phenomena in partially saturated soils, unaccounted soil heterogeneity, and discrepancies between the measured and predicted electrical conductivities in the tracer infiltration area.
9 Jan 2015
AG-2015.01-2491
physics.geo-ph
D. F. Smart, M. A. Shea, A. L. Melott, C. M. Laird
Ice cores are archives of climate change and possibly large solar proton events (SPEs). Wolff et al. (2012) used a single event, a nitrate peak in the GISP2-H core, which McCracken et al. (2001a) time associated with the poorly quantified 1859 Carrington event, to discredit SPE-produced, impulsive nitrate deposition in polar ice. This is not the ideal test case. We critique the Wolff et al. analysis and demonstrate that the data they used cannot detect impulsive nitrate events because of resolution limitations. We suggest re-examination of the top of the Greenland ice sheet at key intervals over the last two millennia with attention to fine resolution and replicate sampling of multiple species. This will allow further insight into polar depositional processes on a sub-seasonal scale, including atmospheric sources, transport mechanisms to the ice sheet, post-depositional interactions, and a potential SPE association.
6 Jan 2015
AG-2014.12-2391
physics.geo-ph
Stuart Hamilton, John Lovette
In this paper we estimate the living carbon lost from Ecuador's mangrove forests since the advent of export-focused shrimp aquaculture. We use remote sensing techniques to delineate the extent of mangroves and aquaculture at approximately decadal periods since the arrival of aquaculture in each Ecuadorian estuary. We then spatiotemporally calculate the carbon values of the mangrove forests and estimate the amount of carbon lost due to direct displacement by aquaculture. Additionally, we calculate the new carbon stocks generated due to mangrove reforestation or afforestation. This research introduces time and land use / land cover change (LUCC) into the tropical forest carbon literature and examines forest carbon loss at a higher spatiotemporal resolution than in many earlier analyses. We find that 80%, or 7,014,517 t of the living carbon lost in Ecuadorian mangrove forests can be attributed to direct displacement of mangrove forests by shrimp aquaculture. We also find that Intergovernmental Panel on Climate Change (IPCC) compliant carbon grids within Ecuador's estuaries overestimate living carbon levels in estuaries where substantial LUCC has occurred. By approaching the mangrove forest carbon loss question from a LUCC perspective, these findings allow for tropical nations and other intervention agents to prioritize and target a limited set of land transitions that likely drive the majority of carbon losses. This singular cause of transition has implications for programs that attempt to offset or limit future forest carbon losses and place value on forest carbon or other forest good and services.
31 Dec 2014
AG-2014.12-2116
physics.geo-ph
Prihadi Sumintadireja, Asep Saepuloh, Dasapta E. Irawan, Diky Irawan, Ahmad Fadillah
The exploration of geothermal system at Mount Ciremai has been started since the early 1980s and has just been studied carefully since the early 2000s. Previous studies have detected the potential of geothermal system and also the groundwater mechanism feeding the system. This paper will discuss the geothermal exploration based on regional scale surface temperature analysis with Landsat image to have a more detail interpretation of the geological setting and magneto-telluric or MT survey at prospect zones, which identified by the previous method, to have a more exact and in depth local scale structural interpretation. Both methods are directed to pin point appropriate locations for geothermal pilot hole drilling and testing. We used four scenes of Landsat Enhanced Thematic Mapper or ETM+ data to estimate the surface manifestation of a geothermal system. Temporal analysis of Land Surface Temperature or LST was applied and coupled with field temperature measurement at seven locations. By combining the TTM with NDVI threshold, the authors can identify six zones with surface temperature anomaly. Among these six zones, three zones were interpreted to have a relation with geothermal system and the other three zones were related to human activities. Then, MT survey was performed at the three geothermal prospects identified from previous remote sensing analysis, at the east flank of the volcano, to estimate the detail subsurface structures. The MT survey successfully identified four buried normal faults in the area, which positively are a part of the conduits in the geothermal system east of Mount Ciremai. From MT analysis, the author also found the locations of volcanic zone, bedrock zone, and the prospect zone. The combination of Landsat analysis on regional scale and MT measurement on a more detail scale has proven to be the reliable method to map geothermal prospect area.
30 Dec 2014
AG-2014.12-2334
physics.geo-ph
Nakul N. Karle, Kiran M. Kolwankar
Even though many objects and phenomena of importance in geophysics have been shown to have fractal character, there are still many of them which show self-similar character and yet to be studied. The objective of the present work is to demonstrate that the fractal dimension of the boundary of a natural water body can be used to shed light on irregularity as well as other properties of a region. Owing to easy availability of satellite images and image processing softwares this turns out to be a handy tool. In this study, we have analyzed several lakes in India mostly around the Western Ghats region. We find that the fractal dimension of their boundaries for the length scales between around 40 meters to 2 kilometers, in general, has broad variation from 1.2 to 1.6. But when they are grouped into three categories, viz., lakes along the ridge of Western Ghats, lakes in the planes and lakes in the mountain region, we find the first two groups to have a narrower distribution of dimensions.
20 Dec 2014
AG-2014.12-1356
physics.geo-ph
N. A. M. Araújo, K. J. Schrenk, H. J. Herrmann, J. S. Andrade
What is the best way to divide a rugged landscape? Since ancient times, watersheds separating adjacent water systems that flow, for example, toward different seas, have been used to delimit boundaries. Interestingly, serious and even tense border disputes between countries have relied on the subtle geometrical properties of these tortuous lines. For instance, slight and even anthropogenic modifications of landscapes can produce large changes in a watershed, and the effects can be highly nonlocal. Although the watershed concept arises naturally in geomorphology, where it plays a fundamental role in water management, landslide, and flood prevention, it also has important applications in seemingly unrelated fields such as image processing and medicine. Despite the far-reaching consequences of the scaling properties on watershed-related hydrological and political issues, it was only recently that a more profound and revealing connection has been disclosed between the concept of watershed and statistical physics of disordered systems. This review initially surveys the origin and definition of a watershed line in a geomorphological framework to subsequently introduce its basic geometrical and physical properties. Results on statistical properties of watersheds obtained from artificial model landscapes generated with long-range correlations are presented and shown to be in good qualitative and quantitative agreement with real landscapes.
18 Dec 2014
AG-2014.12-3018
physics.geo-ph
John W. Crowley, Richard F. Katz, Peter J. Huybers, Charles H. Langmuir, Sung-Hyun Park
Glacial cycles redistribute water between oceans and continents causing pressure changes in the upper mantle, with consequences for melting of Earth's interior. Using Plio-Pleistocene sea-level variations as a forcing function, theoretical models of mid-ocean ridge dynamics that include melt transport predict temporal variations in crustal thickness of hundreds of meters. New bathymetry from the Australian-Antarctic ridge shows significant spectral energy near the Milankovitch periods of 23, 41, and 100 ky, consistent with model predictions. These results suggest that abyssal hills, one of the most common bathymetric features on Earth, record the magmatic response to changes in sea level. The models and data support a link between glacial cycles at the surface and mantle melting at depth, recorded in the bathymetric fabric of the sea floor.
15 Dec 2014
AG-2014.12-3767
physics.geo-ph
Andrew J. Turner, Richard F. Katz, Mark D. Behn
Grain size is an important control on mantle viscosity and permeability, but is difficult or impossible to measure in situ. We construct a two-dimensional, single phase model for the steady-state mean grain size beneath a mid-ocean ridge. The mantle rheology is modelled as a composite of diffusion creep, dislocation creep, dislocation accommodated grain boundary sliding, and a plastic stress limiter. The mean grain size is calculated by the piezometric relationship of Austin and Evans [2007]. We investigate the sensitivity of our model to global variations in grain growth exponent, potential temperature, spreading-rate, and mantle hydration. We interpret the mean mean grain-size field in the context of permeability. The permeability structure due to mean grain size may be approximated as a high permeability region beneath a low permeability region. The transition between high and low permeability regions forms a boundary that is steeply sloped toward the ridge axis. We hypothesise that such a permeability structure generated from the variability of the mean grain size may be able to focus melt towards the ridge axis, analogous to a Sparks and Parmentier [1991]-type focusing. This focusing may, in turn, constrain the region where significant melt fractions are observed by seismic or magnetotelluric surveys. This interpretation of melt focusing via the grain-size permeability structure is consistent with MT observation of the asthenosphere beneath the East Pacific Rise [Baba et al., 2006, Key et al., 2013].
13 Dec 2014
AG-2014.12-797
physics.geo-ph
Lin Zhu, Huili Gong, Zhenxue Dai, Tingbao Xu, Xiaosi Su
Increased demand for water resources together with the influence of climate change has degraded water conditions which support vegetation in many parts of the world, especially in arid and semiarid areas. This study develops an integrated framework to assess the impact of precipitation and groundwater on vegetation growth in the Xiliao River Plain of northern China. The integrated framework systematically combines remote sensing technology with water flow modeling in the vadose zone and field data analysis. The vegetation growth is quantitatively evaluated with the remote sensing data by the Normalized Difference Vegetation Index (NDVI) and the simulated plant water uptake rates. The correlations among precipitation, groundwater depth and NDVI are investigated by using Pearson correlation equations. The results provide insights for understanding interactions between precipitation and groundwater and their contributions to vegetation growth. Strong correlations between groundwater depth, plant water uptake and NDVI are found in parts of the study area during a ten-year drought period. The numerical modeling results indicate that there is an increased correlation between the groundwater depth and vegetation growth and that groundwater significantly contributes to sustaining effective soil moisture for vegetation growth during the long drought period. Therefore, a decreasing groundwater table might pose a great threat to the survival of vegetation during a long drought period.
11 Dec 2014
AG-2014.12-799
physics.geo-ph
Steve Dye
Radiogenic heating is a key component of the energy balance and thermal evolution of the Earth. It contributes to mantle convection, plate tectonics, volcanoes, and mountain building. Geo-neutrino observations estimate the present radiogenic power of our planet. This estimate depends on the quantity and distribution of heat-producing elements in various Earth reservoirs. Of particular geological importance is radiogenic heating in the mantle. This quantity informs the origin and thermal evolution of our planet. Here we present: currently reported geo-neutrino observations; estimates of the mantle geo-neutrino signal, mantle radiogenic heating, and mantle cooling; a comparison of chemical Earth model predictions of the mantle geo-neutrino signal and mantle radiogenic heating; a brief discussion of radiogenic heating in the core, including calculations of geo-neutrino signals per pW/kg; and finally a discussion of observational strategy.
11 Dec 2014
AG-2014.12-611
physics.geo-ph
Kiran M. Kolwankar, Nakul N. Karle
Fractal surfaces are ubiquitous in nature as well as in the sciences. The examples range from the cloud boundaries to the corroded surfaces. Fractal dimension gives a measure of the irregularity in the object under study. We present a simple method to estimate the fractal dimension of mountain surface. We propose to use easily available satellite images of lakes for this purpose. The fractal dimension of the boundary of a lake, which can be extracted using image analysis softwares, can be determined easily which gives the estimate of the fractal dimension of the mountain surface and hence a quantitative characterization of the irregularity of the topography of the mountain surface. This value will be useful in validating models of mountain formation
8 Dec 2014
AG-2014.12-2505
physics.geo-ph
Michael A. Calkins, Keith Julien, Philippe Marti
The linear theory for rotating compressible convection in a plane layer geometry is presented for the astrophysically-relevant case of low Prandtl number gases. When the rotation rate of the system is large, the flow remains geostrophically balanced for all stratification levels investigated and the classical (i.e., incompressible) asymptotic scaling laws for the critical parameters are recovered. For sufficiently small Prandtl numbers, increasing stratification tends to further destabilise the fluid layer, decrease the critical wavenumber and increase the oscillation frequency of the convective instability. In combination, these effects increase the relative magnitude of the time derivative of the density perturbation contained in the conservation of mass equation to non-negligible levels; the resulting convective instabilities occur in the form of compressional quasi-geostrophic oscillations. We find that the anelastic equations, which neglect this term, cannot capture these instabilities and possess spuriously-growing eigenmodes in the rapidly rotating, low Prandtl number regime. It is shown that the Mach number for rapidly rotating compressible convection is intrinsically small for all background states, regardless of the departure from adiabaticity.
5 Dec 2014
AG-2014.12-156
physics.geo-ph
Jon Derek Loftis, Harry V. Wang, Stuart E. Hamilton, David R. Forrest
We present the geospatial methods in conjunction with results of a newly developed storm surge and sub-grid inundation model which was applied in New York City during Hurricane Sandy in 2012. Sub-grid modeling takes a novel approach for partial wetting and drying within grid cells, eschewing the conventional hydrodynamic modeling method by nesting a sub-grid containing high-resolution lidar topography and fine scale bathymetry within each computational grid cell. In doing so, the sub-grid modeling method is heavily dependent on building and street configuration provided by the DEM. The results of spatial comparisons between the sub-grid model and FEMA's maximum inundation extents in New York City yielded an unparalleled absolute mean distance difference of 38m and an average of 75% areal spatial match. An in-depth error analysis reveals that the modeled extent contour is well correlated with the FEMA extent contour in most areas, except in several distinct areas where differences in special features cause significant de-correlations between the two contours. Examples of these errors were found to be primarily attributed to lack of building representation in the New Jersey region of the model grid, occluded highway underpasses artificially blocking fluid flow, and DEM source differences between the model and FEMA. Accurate representation of these urban infrastructural features is critical in terms of sub-grid modeling, because it uniquely affects the fluid flux through each grid cell side, which ultimately determines the water depth and extent of flooding via distribution of water volume within each grid cell. Incorporation of buildings and highway underpasses allow for the model to improve overall absolute mean distance error metrics from 38m to 32m and area comparisons from 75% spatial match to 80% with minimal additional effort.
2 Dec 2014
AG-2014.12-015
physics.geo-ph
Alexandra Pais, Anna Morozova, Nathanaël Schaeffer
The flow of liquid metal inside the Earth's core produces the geomagnetic field and its time variations. Understanding the variability of those deep currents is crucial to improve the forecast of geomagnetic field variations, which affect human spacial and aeronautic activities. Moreover, it may provide relevant information on the core dynamics. The main goal of this study is to extract and characterize the leading variability modes of core flows over centennial periods, and to assess their statistical robustness. To this end, we use flows that we invert from two geomagnetic field models (gufm1 and COV-OBS), and apply Principal Component Analysis and Singular Value Decomposition of coupled fields. The quasi geostrophic (QG) flows inverted from both geomagnetic field models show similar features. However, COV-OBS has a less energetic mean and larger time variability. The statistical significance of flow components is tested from analyses performed on subareas of the whole domain. Bootstrapping methods are also used to extract significant flow features required by both gufm1 and COV-OBS. Three main empirical circulation modes emerge, simultaneously constrained by both geomagnetic field models and expected to be robust against the particular a priori used to build them (large scale QG dynamics). Mode 1 exhibits three large vortices at medium/high latitudes, with opposite circulation under the Atlantic and the Pacific hemispheres. Mode 2 interestingly accounts for most of the variations of the Earth's core angular momentum. In this mode, the regions close to the tangent cylinder and to the equator are correlated, and oscillate with a period between 80 and 90 years. Each of these two modes is energetic enough to alter the mean flow, sometimes reinforcing the eccentric gyre, and other times breaking it up into smaller circulations. The three main circulation modes added together to the mean flow account for about 70% of the flows variability, 90% of the root mean square total velocities, and 95% of the secular variation induced by the total flows. Direct physical interpretation of the computed modes is not straightforward. Nonethe-less, similarities found between the two first modes and time/spatial features identified in different studies of core dynamics, suggest that our approach can help to pinpoint the relevant physical processes inside the core on centennial timescales.
1 Dec 2014
AG-2014.11-2058
physics.geo-ph
Nicola Scafetta
During the last few years a number of works have proposed that planetary harmonics regulate solar oscillations and the Earth climate. Herein I address some critiques. Detailed analysis of the data do support the planetary theory of solar and climate variation. In particular, I show that: (1) high-resolution cosmogenic 10Be and 14C solar activity proxy records both during the Holocene and during the Marine Interglacial Stage 9.3 (MIS 9.3), 325-336 kyr ago, present four common spectral peaks at about 103, 115, 130 and 150 yrs (this is the frequency band that generates Maunder and Dalton like grand solar minima) that can be deduced from a simple solar model based on a generic non-linear coupling between planetary and solar harmonics; (2) time-frequency analysis and advanced minimum variance distortion-less response (MVDR) magnitude squared coherence analysis confirm the existence of persistent astronomical harmonics in the climate records at the decadal and multidecadal scales when used with an appropriate window length (110 years) to guarantee a sufficient spectral resolution. However, the best coherence test can be currently made only by comparing directly the temperature and astronomical spectra as done in Scafetta (J. Atmos. Sol. Terr. Phys. 72(13), 951-970, 2010). The spectral coherence between planetary, solar and climatic oscillations is confirmed at the following periods: 5.2 yr, 5.93 yr, 6.62 yr, 7.42 yr, 9.1 yr (main lunar tidal cycle), 10.4 yr (related to the 9.93-10.87-11.86 yr solar cycle harmonics), 13.8-15.0 yr, 20 yr, 30 yr and 61 yr, 103 yr, 115 yr, 130 yr, 150 yr and about 1000 year. This work responds to the critiques of Cauquoin et al. (Astron. Astrophys. 561, A132, 2014) who ignored alternative planetary theories of solar variations, and of Holm (J. Atmos. Sol. Terr. Phys. 110-111, 23-27, 2014) who used inadequate physical and time frequency analysis of the data.
30 Nov 2014
AG-2014.11-1695
physics.geo-ph
Naum I. Gershenzon, Gust Bambakidis, Thomas Skinner
Description of the transitional process from a static to a dynamic frictional regime is a fundamental problem of modern physics. Previously we developed a model based on the well-known Frenkel-Kontorova model to describe dry macroscopic friction. Here this model has been modified to include the effect of dissipation in derived relations between the kinematic and dynamic parameters of a transition process. The main (somewhat counterintuitive) result is a demonstration that the rupture (i.e. detachment front) velocity of the slip pulse which arises during the transition does not depend on friction. The only parameter (besides the elastic and plastic properties of the medium) controlling the rupture velocity is the shear to normal stress ratio. In contrast to the rupture velocity, the slip velocity does depend on friction. The model we have developed describes these processes over a wide range of rupture and slip velocities (up to 7 orders of magnitude) allowing, in particular, the consideration of seismic events ranging from regular earthquakes, with rupture velocities on the order of a few km/s, to slow slip events, with rupture velocities of a few km/day.
25 Nov 2014
AG-2014.11-3883
physics.geo-ph
Thomas Gallot, Alison Malcolm, Thomas L. Szabo, Stephen Brown, Daniel Burns, Michael Fehler
The nonlinear elastic response of rocks is known to be caused by the rocks' microstructure, particularly cracks and fluids. This paper presents a method for characterizing the nonlinearity of rocks in a laboratory scale experiment with a unique configuration. This configuration has been designed to open up the possibility the nonlinear characterization of rocks as an imaging tool in a field scenario. The nonlinear interaction of two traveling waves: a low-amplitude 500 kHz P-wave probe and a high-amplitude 50 kHz S-wave pump has been studied on a room-dry 15 x 15x 3 cm slab of Berea sandstone. Changes in the arrival time of the P-wave probe as it passes through the perturbation created by the traveling S-wave pump were recorded. Waveforms were time gated to simulate a semi-infinite medium. The shear wave phase relative to the P-wave probe signal was varied with resultant changes in the P-wave probe arrival time of up to 100 ns, corresponding to a change in elastic properties of 0.2%. In order to estimate the strain in our sample, ae also measured the particle velocity at the sample surface to scale a finite difference linear elastic simulation to estimate the complex strain field in the sample, on the order of $10^{-6}$, induced by the S-wave pump. We derived a fourth order elastic model to relate the changes in elasticity to the pump strain components. We recover quadratic and cubic nonlinear parameters: $\tildeβ=-872$, $\tildeδ=-1.1\times10^{10}$, respectively, at room-temperature and when particle motions of the pump and probe waves are aligned. Temperature fluctuations are correlated to changes in the recovered values of $\tildeβ$ and $\tildeδ$ and we find that the nonlinear parameter changes when the particle motions are orthogonal. No evidence of slow dynamics was seen in our measurements.
24 Nov 2014
AG-2014.11-2706
physics.geo-ph
Kevin Jourde, Dominique Gibert, Jacques Marteau
Both muon tomography and gravimetry are geophysical methods that provide information on the density structure of the Earth's subsurface. Muon tomography measures the natural flux of cosmic muons and its attenuation produced by the screening effect of the rock mass to image. Gravimetry generally consists in measurements of the vertical component of the local gravity field. Both methods are linearly linked to density, but their spatial sensitivity is very different. Muon tomography essentially works like medical X-ray scan and integrates density information along elongated narrow conical volumes while gravimetry measurements are linked to density by a 3-dimensional integral encompassing the whole studied domain. We develop the mathematical expressions of these integration formulas -- called acquisition kernels -- to express resolving kernels that act as spatial filters relating the true unknown density structure to the density distribution actually recoverable from the available data. The resolving kernels provide a tool to quantitatively describe the resolution of the density models and to evaluate the resolution improvement expected by adding new data in the inversion. The resolving kernels derived in the joined muon/gravimetry case indicate that gravity data are almost useless to constrain the density structure in regions sampled by more than two muon tomography acquisitions. Interestingly the resolution in deeper regions not sampled by muon tomography is significantly improved by joining the two techniques. Examples taken from field experiments performed on La Soufrière of Guadeloupe volcano are discussed.
19 Nov 2014
AG-2014.11-1197
physics.geo-ph
Zhenxue Dai, Hari Viswanathan, Julianna Fessenden-Rahn, Richard Middleton, Feng Pan, Wei Jia, Si-Yong Lee, Brian McPherson, William Ampomah, Reid Grigg
This study develops a statistical method to perform uncertainty quantification for understanding CO2 storage potential within an enhanced oil recovery (EOR) environment at the Farnsworth Unit of the Anadarko Basin in northern Texas. A set of geostatistical-based Monte Carlo simulations of CO2-oil-water flow and reactive transport in the Morrow formation are conducted for global sensitivity and statistical analysis of the major uncertainty metrics: net CO2 injection, cumulative oil production, cumulative gas (CH4) production, and net water injection. A global sensitivity and response surface analysis indicates that reservoir permeability, porosity, and thickness are the major intrinsic reservoir parameters that control net CO2 injection/storage and oil/gas recovery rates. The well spacing and the initial water saturation also have large impact on the oil/gas recovery rates. Further, this study has revealed key insights into the potential behavior and the operational parameters of CO2 sequestration at CO2-EOR sites, including the impact of reservoir characterization uncertainty; understanding this uncertainty is critical in terms of economic decision making and the cost-effectiveness of CO2 storage through EOR.
18 Nov 2014
AG-2014.11-1117
physics.geo-ph
Noa Mitsui, P. Ván
Rate- and state-dependent friction law for velocity-step tests is analyzed from a thermodynamic point of view. A simple macroscopic non-equilibrium thermodynamic model with a single internal variable reproduces instantaneous jump and relaxation. Velocity weakening appears as a consequence of a plasticity related nonlinear coefficient. Permanent part of displacement corresponds to plastic strain, and relaxation effects are analogous to creep in thermodynamic rheology.
18 Nov 2014
AG-2014.11-1275
physics.geo-ph
Pierre Delage
Clays and claystones are considered in some countries (including Belgium, France and Switzerland) as a potential host rock for high activity long lived radioactive waste disposal at great depth. One of the aspects to deal with in performance assessment is related to the effects on the host rock of the temperature elevation due to the placement of exothermic wastes. The potential effects of the thermal impact on the excavated damaged zone in the close field are another important issue that was the goal of the TIMODAZ European research project. In this paper, some principles of waste disposal in clayey host rocks at great depth are first presented and a series of experimental investigations carried out on specific equipment specially developed to face the problem are presented. Both drained and undrained tests have been developed to investigate the drained thermal volume changes of clays and claystone and the thermal pressurization occurring around the galleries. This importance of proper initial saturation (under in-situ stresses) and of satisfactory drainage conditions (in spite of the significantly low permeability of claystones) is emphasized, leading to the development of a new hollow cylinder apparatus. It is observed that claystones cannot be considered as overconsolidated clays given that they can exhibit, as the Callovo-Oxfordian claystone does, a thermoplastic contraction. Mechanical and thermal hardening are however observed, extending to claystones the knowledge already gained on clays. A new method of determining in the laboratory the thermal pressurization coefficient is described and the data obtained allow completing existing data in the field. Finally, the hollow cylinder apparatus makes it possible to demonstrate that the good self-sealing properties of clays and claystones can be extended to temperature effects, an important conclusion in terms of performance assessment.
18 Nov 2014
AG-2014.11-511
physics.geo-ph
M. Harmand, A. Ravasio, S. Mazevet, J. Bouchet, A. Denoeud, F. Dorchies, Y. Feng, C. Fourment, E . Galtier, J. Gaudin, F. Guyot, R. Kodama, M. Koenig, H. J. Lee, K. Miyanishi, G. Morard, R. Musella, B. Nagler, M. Nakatsutsumi, N. Ozaki, V. Recoules, S. Toleikis, T. Vinci, U. Zastrau, D. Zhu, A. Benuzzi-Mounaix
Several important geophysical features such as heat flux at the Core-Mantle Boundary or geodynamo production are intimately related with the temperature profile in the Earth's core. However, measuring the melting curve of iron at conditions corresponding to the Earth inner core boundary under pressure of 330 GPa has eluded scientists for several decades. Significant discrepancies in previously reported iron melting temperatures at high pressure have called into question the validity of dynamic measurements. We report measurements made with a novel approach using X-ray absorption spectroscopy using an X-ray free electron laser source coupled to a laser shock experiment. We determine the state of iron along the shock Hugoniot up to 420 GPa (+/- 50) and 10800 K (+/- 1390) and find an upper boundary for the melting curve of iron by detecting solid iron at 130 GPa and molten at 260, 380 and 420 GPa along the shock Hugoniot. Our result establishes unambiguous agreement between dynamic measurement and recent extrapolations from static data thus resolving the long-standing controversy over the reliability of using dynamic compression to study the melting of iron at conditions close to the Earth's inner core boundary and beyond.
8 Nov 2014
AG-2014.11-3392
physics.geo-ph
Naum I. Gershenzon, Gust Bambakidis
Bursts of tremor accompany a moving slip pulse in Episodic Tremor and Slip (ETS) events. The sources of this non-volcanic tremor (NVT) are largely unknown. We have developed a model describing the mechanism of NTV generation. According to this model, NTV is a reflection of resonant-type oscillations excited in a fault at certain depth ranges. From a mathematical viewpoint, tremor (phonons) and slip pulses (solitons) are two different solutions of the sine-Gordon equation describing frictional processes inside a fault. In an ETS event, a moving slip pulse generates tremor due to interaction with structural heterogeneities in a fault and to failures of small asperities. Observed tremor parameters, such as central frequency and frequency attenuation curve, are associated with fault parameters and conditions, such as elastic modulus, effective normal stress, penetration hardness and friction. Model prediction of NTV frequency content is consistent with observations. In the framework of this model it is possible to explain the complicated pattern of tremor migration, including rapid tremor propagation and reverse tremor migration. Migration along the strike direction is associated with movement of the slip pulse. Rapid tremor propagation in the slip-parallel direction is associated with movement of kinks along a 2D slip pulse. A slip pulse, pinned in some places, can fragment into several pulses, causing tremor associated with some of these pulse fragments to move opposite to the main propagation direction. The model predicts that the frequency content of tremor during an ETS event is slightly different from the frequency content of ambient tremor and tremor triggered by earthquakes.
4 Nov 2014
AG-2014.11-167
physics.geo-ph
Antonella Peresan, Alexander Gorshkov, Alexander Soloviev, Giuliano F. Panza
The reliable statistical characterization of the spatial and temporal properties of large earthquakes occurrence is one of the most debated issues in seismic hazard assessment, due to the unavoidably limited observations from past events. We show that pattern recognition techniques, which are designed in a formal and testable way, may provide significant space-time constraints about impending strong earthquakes. This information, when combined with physically sound methods for ground shaking computation, like the neo-deterministic approach (NDSHA), may produce effectively preventive seismic hazard maps. Pattern recognition analysis of morphostructural data provide quantitative and systematic criteria for identifying the areas prone to the largest events, taking into account a wide set of possible geophysical and geological data, whilst the formal identification of precursory seismicity patterns (by means of CN and M8S algorithms), duly validated by prospective testing, provides useful constraints about impending strong earthquakes at the intermediate space-time scale. According to a multi-scale approach, the information about the areas where a strong earthquake is likely to occur can be effectively integrated with different observations (e.g. geodetic and satellite data), including regional scale modeling of the stress field variations and of the seismic ground shaking, so as to identify a set of priority areas for detailed investigations of short-term precursors at local scale and for microzonation studies. Results from the pattern recognition of earthquake prone areas (M>=5.0) in the Po plain (Northern Italy), as well as from prospective testing and validation of the time-dependent NDSHA scenarios are presented.
4 Nov 2014
AG-2014.10-2153
physics.geo-ph
Ben G. Lasscock, Brendon J. Hall, Michael E. Glinsky
A classification technique for identifying focal mechanism type and fault plane orientation based on the polarity of P-wave "first motion" data is derived. A support vector machine is used to classify the polarity data in the space of spherical harmonic functions. The classification is non-parametric in the sense that there is no requirement to make a priori assumptions source mechanism. A metric of similarity potentially able to distinguish shear versus tensile dislocation without requiring estimation of the fault plane orientation is a natural consequence of this procedure. Going further, correlation functions between template source mechanism is derived, gives an estimate of fault plane orientation assuming a particular source mechanism.
31 Oct 2014
AG-2014.10-3360
physics.geo-ph
Ludivine Oruba, Emmanuel Dormy
We investigate the transition from steady dipolar to reversing multipolar dynamos. The Earth has been argued to lie close to this transition, which could offer a scenario for geomagnetic reversals. We show that the transition between dipolar and multipolar dynamos is characterized by a three terms balance (as opposed to the usually assumed two terms balance), which involves the non-gradient parts of inertial, viscous and Coriolis forces. We introduce from this equilibrium the sole parameter ${\rm Ro}\,{\rm E}^{-1/3} \equiv {\rm Re}\,{\rm E}^{2/3}$, which accurately describes the transition for a wide database of 132 fully three dimensional direct numerical simulations of spherical rotating dynamos (courtesy of U. Christensen). This resolves earlier contradictions in the literature on the relevant two,terms balance at the transition. Considering only a two terms balance between the non-gradient part of the Coriolis force and of inertial forces, provides the classical ${\rm Ro}/{\ell_u}$ (Christensen and Aubert, 2006). This transition can be equivalently described by ${\rm Re} \, {\ell^{2}_u}$, which corresponds to the two terms balance between the non-gradient part of inertial forces and viscous forces (Soderlund {\it et al.}, 2012).
29 Oct 2014
AG-2014.10-1779
physics.geo-ph
L. A. Martin-Montoya, N. M. Aranda-Camacho, C. J. Quimbay
We study long-range correlations and trends in time series extracted from the data of seismic events occurred from 1973 to 2011 in a rectangular region that contains mainly all the continental part of Colombia. The long-range correlations are detected by the calculation of the Hurst exponents for the time series of interevent intervals, separation distances, depth differences and magnitude differences. By using a modification of the classical $R/S$ method that has been developed to detect short-range correlations in time series, we find the existence of persistence for all the time series considered except for magnitude differences. We find also, by using the $DFA$ until the third order, that the studied time series are not influenced by trends. Additionally, an analysis of the Hurst exponent as a function of the number of events in the time and the maximum window size is presented.
28 Oct 2014
AG-2014.10-1724
physics.geo-ph
Musa Maharramov, Biondo Biondi
We propose a formulation of full-wavefield inversion (FWI) as a constrained optimization problem, and describe a computationally efficient technique for solving constrained full-wavefield inversion (CFWI). The technique is based on using a total-variation regularization method, with the regularization weighted in favor of constraining deeper subsurface model sections. The method helps to promote "edge-preserving" blocky model inversion where fitting the seismic data alone fails to adequately constrain the model. The method is demonstrated on synthetic datasets with added noise, and is shown to enhance the sharpness of the inverted model and correctly reposition mispositioned reflectors by better constraining the velocity model at depth.
26 Oct 2014
AG-2014.10-1726
physics.geo-ph
Musa Maharramov
I provide a framework for deriving fast finite-difference algorithms for the numerical modeling of acoustic wave propagation in anisotropic media. I deploy it in the case of transversely isotropic media to implement a kinematically accurate fast finite-difference modeling method. This results in a significant reduction of the shear artifacts compared to similar kinematically accurate finite-difference methods.
26 Oct 2014
AG-2014.10-1725
physics.geo-ph
Musa Maharramov, Biondo Biondi
We propose a multi-model formulation of full-waveform inversion that is similar to image decomposition into a "cartoon" and "texture" used in image processing. Inversion problem is formulated as unconstrained multi-norm optimization that can be solved using conventional iterative solvers. We demonstrate the proposed model decomposition approach by recovering a blocky subsurface seismic model from noisy data in time-lapse and single-model full-waveform inversion problems.
26 Oct 2014
AG-2014.10-1628
physics.geo-ph
Maurice H. P. M. van Putten, Anton F. P. van Putten, Michel J. A. M. van Putten
Event counts are a powerful diagnostic for earthquake analysis. We report on a bimodal distribution of earthquake event counts in the U.S. since 2013. The new peak is about a magnitude M1 with a distribution very similar to that of induced earthquakes in Groningen, The Netherlands, characterized by exponential growth in event count since 2001. The latter shows a doubling time of 6.24 years with a relatively constant rate of land subsidence. We model its internal shear stresses as a function of dimensionless curvature and illustrate the resulting exponential growth in a tabletop crack formation experiment. Our study proposes a new method of parameter-free statistical forecasting of induced events, that circumvents the need for a magnitude cut-off in the Gutenberg-Richter relationship.
24 Oct 2014
AG-2014.10-1475
physics.geo-ph
Strachimir Cht. Mavrodiev, Natalia Kilifarska, Lazo Pekevski, Giorgi Kikuashvili
The aims of the project 2011-2014) are in the project title- Complex Research of Earthquakes Forecasting Possibilities, Seismic and Climate Change Correlations- to create a team for researching the above mentioned problem. In the Project participated 76 scientists from 16 Institutes and 8 countries- Armenia, Bulgaria, Georgia, Greece, Macedonia, Slovenia, Turkey and Ukraine. The main results are shortly listed in the next. Creating a group which is able to fulfill a Complex Research of Earthquakes Forecasting Possibilities; The main result is statistical prove of imminent forecasting possibility for seismic regional activity on the basis of the geomagnetic monitoring in the framework of special created data acquisition system for earthquakes archiving, visualization and analysis (geomagnetic quake approach). Illustrated with the data from INTERMAGNET stations- PAG (Panagurichte, Bulgaria), SUA (Surlari, Romania), GCK (Grocka, Serbia) and LAquila (AQU, Italy) for the last 5-8 years; The application of the geomagnetic quake approach for analysis of boreholes water level demonstrated that the water level variation is also a reliable imminent regional earthquakes precursor; It was formulated and researched the hypothesis for reality of Climate change Seismic correlation and axion- geo -nuclear -reactors existence; The research of deep Earth crust structure and upper mantle study using the inverse problem analysis of the Earth electromagnetic radiation in radio diapason, measured with Astrogon device was performed in Greece and Bulgaria; The members of Project participated many International Conferences, Congresses and Workshops with presentations and published many 97 papers.
22 Oct 2014
AG-2014.10-3091
physics.geo-ph
Mikael Beuthe
Jupiter's moon Europa has a thin icy crust which is decoupled from the mantle by a subsurface ocean. The crust thus responds to tidal forcing as a deformed membrane, cold at the top and near melting point at the bottom. In this paper I develop the membrane theory of viscoelastic shells with depth-dependent rheology with the dual goal of predicting tidal tectonics and computing tidal dissipation. Two parameters characterize the tidal response of the membrane: the effective Poisson's ratio $\barν$ and the membrane spring constant $Λ$, the latter being proportional to the crust thickness and effective shear modulus. I solve membrane theory in terms of tidal Love numbers, for which I derive analytical formulas depending on $Λ$, $\barν$, the ocean-to-bulk density ratio and the number $k_2^o$ representing the influence of the deep interior. Membrane formulas predict $h_2$ and $k_2$ with an accuracy of a few tenths of percent if the crust thickness is less than one hundred kilometers, whereas the error on $l_2$ is a few percents. Benchmarking with the thick-shell software SatStress leads to the discovery of an error in the original, uncorrected version of the code that changes stress components by up to 40%. Regarding tectonics, I show that different stress-free states account for the conflicting predictions of thin and thick shell models about the magnitude of tensile stresses due to nonsynchronous rotation. Regarding dissipation, I prove that tidal heating in the crust is proportional to $Im Λ$ and that it is equal to the global heat flow (proportional to $Im k_2$) minus the core-mantle heat flow (proportional to $Im k_2^o$). As an illustration, I compute the equilibrium thickness of a convecting crust. More generally, membrane formulas are useful in any application involving tidal Love numbers such as crust thickness estimates, despinning tectonics or true polar wander.
17 Oct 2014
AG-2014.10-904
physics.geo-ph
Inna R. Petrova, Vladimir V. Bochkarev, Ruslan R. Latypov
The method of measurement of Doppler frequency shift of ionospheric signal - HF Doppler technique - is one of well-known and widely used methods of ionosphere research. It allows to research various disturbances in the ionosphere. There are some sources of disturbances in the ionosphere. These are geomagnetic storms, solar flashes, metrological effects, atmospheric waves. This method allows to find out the influence of earthquakes, explosions and other processes on the ionosphere, which occur near to the Earth. HF Doppler technique has the high sensitivity to small frequency variations and the high time resolution, but interpretation of results is difficult. In this work we make an attempt to use GPS data for Doppler measurements interpretation. Modeling of Doppler frequency shift variations with use of TEC allows to separate ionosphere disturbances of medium scale.
14 Oct 2014
AG-2014.10-3871
physics.geo-ph
M. E. M. Arcos, Randall J. LeVeque
The ability to measure, predict, and compute tsunami flow velocities is of importance in risk assessment and hazard mitigation. Substantial damage can be done by high velocity flows, particularly in harbors and bays, even when the wave height is small. Moreover, advancing the study of sediment transport and tsunami deposits depends on the accurate interpretation and modeling of tsunami flow velocities and accelerations. Until recently, few direct measurements of tsunami velocities existed to compare with model results. During the 11 March 2011 Tohoku Tsunami 328 current meters were in place around the Hawaiian Islands, USA, that captured time series of water velocity in 18 locations, in both harbors and deep channels, at a series of depths. We compare several of these velocity records against numerical simulations performed using the GeoClaw numerical tsunami model, based on solving the depth-averaged shallow water equations with adaptive mesh refinement, to confirm that this model can accurately predict velocities at nearshore locations. Model results demonstrate tsunami current velocity is more spatially variable than wave form or height and therefore may be a more sensitive variable for model validation.
10 Oct 2014
AG-2014.10-401
physics.geo-ph
Yavor Kamer
In this study we address the question of the minimum sample size needed for distinguishing between Gutenberg-Richter distributions with varying b-values at different resolutions. In order to account for both the complete and incomplete parts of a catalog we use the recently introduced angular frequency magnitude distribution (FMD). Unlike the gradually curved FMD, the angular FMD is fully compatible with Aki's maximum likelihood method for b-value estimation. To obtain generic results we conduct our analysis on synthetic catalogs with Monte Carlo methods. Our results indicate that the minimum sample size used in many studies is strictly below the value required for detecting significant variations.
7 Oct 2014
AG-2014.10-319
physics.geo-ph
Yavor Kamer
[Tormann et al., 2014] propose a distance exponential weighted (DEW) b-value mapping approach as an improvement to previous methods of constant radius and nearest neighborhood. To test the performance of their proposed method the authors introduce a score function. This score function is applied on a semi-synthetic earthquake catalog to make inference on the parameters of the method. In this comment we argue that the proposed methodology cannot be applied to seismic analysis since it requires a priori knowledge of the spatial b-value distribution, which it aims to reveal.
7 Oct 2014
AG-2014.10-145
physics.geo-ph
A. Yu. Kurazhkovskii, N. A. Kurazhkovskaya, B. I. Klain
The present paper summarizes results of the studies on the intensity of geomagnetic field in the (167 - 23) Ma interval by sedimentary rocks of the Russian Plate and adjacent territories. The joint analysis of the data paleointensity obtained by sedimentary and thermomagnetized (from PINT12) rocks within this temporal interval is conducted. It is shown that the changes of the paleointensity were occurred chaotically. Alternating bursts and periods of quiet regime of the geomagnetic field are typical for intermittent processes and is a characteristic of the geological interval Jurassic-beginning of Paleogene. The distributions of the paleointensity corresponding to different intervals of geologic time were investigated. It is revealed that the cumulative distribution function (CDF) of the paleointensity values is best approximated by a power function. The indices of the power functions varied depending on geologic time intervals.The analysis of the paleomagnetic data suggests that the medium in which the geomagnetic field is generated is turbulent. Turbulence in the Earth's liquid core is enhanced in the Cretaceous compared with Jurassic and Paleogene.
2 Oct 2014
AG-2014.09-1924
physics.geo-ph
John Scoville, John Spritzer, Friedemann Freund
Various possiblities for a distributed magnetometer network are considered. We discuss strategies such as croudsourcing smartphone magnetometer data, the use of trees as magnetometers, and performing interferometry using magnetometer arrays to synthesize the magnetometers into a large-scale low-frequency radio telescope. Geophysical and other applications of such a network are discussed.
30 Sept 2014
AG-2014.09-1722
physics.geo-ph
Musa Maharramov, Biondo Biondi
We present a technique for reconstructing subsurface velocity model changes from time-lapse seismic survey data using full-waveform inversion (FWI). The technique is based on simultaneously inverting multiple survey vintages, with model difference regularization using the total variation (TV) seminorm. We compare the new TV-regularized time-lapse FWI with the $L_2$-regularized joint inversion proposed in our earlier work, using synthetic data sets that exhibit survey repeatability issues. The results demonstrate clear advantages of the proposed TV-regularized joint inversion over alternatives methods for recovering production-induced model changes that are due to both fluid substitution and geomechanical effects.
29 Sept 2014
AG-2014.09-2631
physics.geo-ph
Yossi Cohen, Daniel H. Rothman
CO$_2$ sequestration in subsurface reservoirs is important for limiting atmospheric CO$_2$ concentrations. However, a complete physical picture able to predict the structure developing within the porous medium is lacking. We investigate theoretically reactive transport in the long-time evolution of carbon in the brine-rock environment. As CO$_2$ is injected into a brine-rock environment, a carbonate-rich region is created amid brine. Within the carbonate-rich region minerals dissolve and migrate from regions of high concentration to low concentration, along with other dissolved carbonate species. This causes mineral precipitation at the interface between the two regions. We argue that precipitation in a small layer reduces diffusivity, and eventually causes mechanical trapping of the CO$_2$. Consequently, only a small fraction of the CO$_2$ is converted to solid mineral; the remainder either dissolves in water or is trapped in its original form. We also study the case of a pure CO$_2$ bubble surrounded by brine and suggest a mechanism that may lead to a carbonate-encrusted bubble due to structural diffusion.
29 Sept 2014
AG-2014.09-1785
physics.geo-ph
Yossi Cohen, Olivier Devauchelle, Hansjorg F. Seybold, Robert S. Yi, Piotr Szymczak, Daniel H. Rothman
River networks exhibit a complex ramified structure that has inspired decades of studies. Yet, an understanding of the propagation of a single stream remains elusive. Here we invoke a criterion for path selection from fracture mechanics and apply it to the growth of streams in a diffusion field. We show that a stream will follow local symmetry in order to maximize the water flux and that its trajectory is defined by the local field in its vicinity. We also study the growth of a real network. We use this principle to construct the history of a network and to find a growth law associated with it. The results show that the deterministic growth of a single channel based on its local environment can be used to characterize the structure of river networks.
29 Sept 2014
AG-2014.09-1639
physics.geo-ph
J. Quinn Norris, Donald L. Turcotte, John B. Rundle
Hydraulic fracturing (fracking) using high pressures and a low viscosity fluid allow the extraction of large quantiles of oil and gas from very low permeability shale formations. The initial production of oil and gas at depth leads to high pressures and an extensive distribution of natural fractures which reduce the pressures. With time these fractures heal, sealing the remaining oil and gas in place. High volume fracking opens the healed fractures allowing the oil and gas to flow the horizontal productions wells. We model the injection process using invasion percolation. We utilize a 2D square lattice of bonds to model the sealed natural fractures. The bonds are assigned random strengths and the fluid, injected at a point, opens the weakest bond adjacent to the growing cluster of opened bonds. Our model exhibits burst dynamics in which the clusters extends rapidly into regions with weak bonds. We associate these bursts with the microseismic activity generated by fracking injections. A principal object of this paper is to study the role of anisotropic stress distributions. Bonds in the $y$-direction are assigned higher random strengths than bonds in the $x$-direction. We illustrate the spatial distribution of clusters and the spatial distribution of bursts (small earthquakes) for several degrees of anisotropy. The results are compared with observed distributions of microseismicity in a fracking injection. Both our bursts and the observed microseismicity satisfy Gutenberg-Richter frequency-size statistics.
25 Sept 2014
AG-2014.09-1455
physics.geo-ph
Mai Quyen Pham, Laurent Duval, Caroline Chaux, Jean-Christophe Pesquet
Unveiling meaningful geophysical information from seismic data requires to deal with both random and structured "noises". As their amplitude may be greater than signals of interest (primaries), additional prior information is especially important in performing efficient signal separation. We address here the problem of multiple reflections, caused by wave-field bouncing between layers. Since only approximate models of these phenomena are available, we propose a flexible framework for time-varying adaptive filtering of seismic signals, using sparse representations, based on inaccurate templates. We recast the joint estimation of adaptive filters and primaries in a new convex variational formulation. This approach allows us to incorporate plausible knowledge about noise statistics, data sparsity and slow filter variation in parsimony-promoting wavelet frames. The designed primal-dual algorithm solves a constrained minimization problem that alleviates standard regularization issues in finding hyperparameters. The approach demonstrates significantly good performance in low signal-to-noise ratio conditions, both for simulated and real field seismic data.
22 Sept 2014
AG-2014.09-1319
physics.geo-ph
Oleg I. Berngardt
This paper presents the properties of ionospheric irregularities elongated with Earth magnetic field during the first 25 minutes after the fall of the meteorite 'Chelyabinsk' experimentally observed with EKB radar of Russian segment of the SuperDARN. It is shown that 40 minutes before meteor fall the EKB radar started to observe powerful scattering from irregularities elongated with the Earth magnetic field in the F-layer. Scattering was observed for 80 minutes and stopped 40 minutes after the meteorite fall. During 9-15 minutes after the meteorite fall at ranges 400-1200 km from the explosion site a changes were observed in the spectral and amplitude characteristics of the scattered signal. This features were the sharp increase in the Doppler frequency shift of the scattered signal corresponding to the Doppler velocities about 600 m/s and the sharp increase of the scattered signal amplitude. This allows us to conclude that we detected the growth of small-scale ionospheric irregularities elongated with the Earth magnetic field at E-layer heights. Joint analysis with the seismic data and numerical modeling shows that the observed effect is connected with the passage of secondary acoustic front formed by supersonic seismic ground wave from the 'Chelyabinsk' meteorite. As a possible explanation the growth of elongated ionospheric irregularities may be caused by the passage of the high-speed acoustic wave in the ionosphere in the presence of high enough background electric field.
21 Sept 2014
AG-2014.09-2839
physics.geo-ph
Pavel V. Krauzin, Denis S. Goldobin
We study the effect of surface temperature oscillations on diffusive transport of solutes of weaklysoluble substances through liquid-saturated porous media. Temperature wave induced by these oscillations and decaying deep in the porous massif creates the solubility wave along with the corresponding solute diffusion flux wave. When the non-dissolved fraction is immobilized in pores---for gases the bubbles can be immobilized by the surface tension force, for solids (e.g., limestone, gas-hydrates) the immobilization of non-dissolved phase is obvious---the only remaining mechanisms of mass transport are related to solute flux through liquid in pores. We evaluate analytically the generated time-average mass flux for the case of medium everywhere littered with non-dissolved phase and reveal the significant effect of the temperature wave on the substance release from the massif and non-dissolved mass redistribution within the massif. Analytical theory is validated with numerical calculations.
10 Sept 2014
AG-2014.09-3119
physics.geo-ph
Mathias Raschke
The probability distribution of the magnitude can be modeled by an exponential distribution according to the Gutenberg-Richter relation. Two alternatives are the truncated exponential distribution (TED) and the cut-off exponential distribution (CED). The TED is frequently used in seismic hazard analysis although it has a weak point: When two TEDs with equal parameters except the upper bound magnitude are mixed, then the resulting distribution is not a TED. Inversely, it is also not possible to split a TED of a seismic region into TEDs of sub-regions with equal parameters except the upper bound magnitude. This weakness is a principal problem as seismic regions are constructed scientific objects and not natural units. We overcome it by the generalization of the above-mentioned exponential distributions: the generalized truncated exponential distribution (GTED). Therein, identical exponential distributions are mixed by the probability distribution of the correct cut-off points. This distribution model is flexible in the vicinity of the upper bound magnitude and is equal to the exponential distribution for smaller magnitudes. Additionally, the exponential distributions TED and CED are special cases of the GTED. We discuss the possible ways of estimating its parameters and introduce the normalized spacing for this purpose. Furthermore, we present methods for geographic aggregation and differentiation of the GTED and demonstrate the potential and universality of our simple approach by applying it to empirical data. The considerable improvement by the GTED in contrast to the TED is indicated by a large difference between the corresponding values of the Akaike information criterion.
8 Sept 2014
AG-2014.09-243
physics.geo-ph
Nuri Hurtado, Raamses Díaz, Julio Torres
The high accuracy on inferrring of rocks properties, such as permeability ($k$), is a very useful study in the analysis of wells. This has led to development and use of empirical equations like Tixier, Timur, among others. In order to improve the inference of permeability we used a hybrid Neuro-Fuzzy System (NFS). The NFS allowed us to infer permeability of well, from data of porosity ($ϕ$) and water saturation ($Sw$). The work was performed with data from wells VCL-1021 (P21) and VCL-950 (P50), Block III, Maracaibo Lake, Venezuela. We evaluated the NFS equations ($k_{P50,i}(ϕ_i,Sw_i)$) with neighboring well data ($P21$), in order to verify the validity of the equations in the area. We have used ANFIS in MatLab.
3 Sept 2014
AG-2014.08-1299
physics.geo-ph
Alejandro Tejedor, Anthony Longjas, Ilya Zaliapin, Efi Foufoula-Georgiou
Maintaining a sustainable socio-ecological state of a river delta requires delivery of material and energy fluxes to its body and coastal zone in a way that avoids malnourishment that would compromise system integrity. We present a quantitative framework for studying delta topology and transport based on representation of a deltaic system by a rooted directed acyclic graph. Applying results from spectral graph theory allows systematic identification of the upstream and downstream subnetworks for a given vertex, computing steady flux propagation in the network, and finding partition of the flow at any channel among the downstream channels. We use this framework to construct vulnerability maps that quantify the relative change of sediment and water delivery to the shoreline outlets in response to possible perturbations in hundreds of upstream links. This enables us to evaluate which links hotspots and what management scenarios would most influence flux delivery to the outlets. The results can be used to examine local or spatially distributed delta interventions and develop a system approach to delta management.
25 Aug 2014
AG-2014.08-2841
physics.geo-ph
Jane Allwright, Richard F Katz
Laboratory experiments in which synthetic, partially molten rock is subjected to forced deformation provide a context for testing hypotheses about the dynamics and rheology of the mantle. Here our hypothesis is that the aggregate viscosity of partially molten mantle is anisotropic, and that this anisotropy arises from deviatoric stresses in the rock matrix. We formulate a model of pipe Poiseuille flow based on theory by Takei and Holtzman [2009a] and Takei and Katz [2013]. Pipe Poiseuille is a configuration that is accessible to laboratory experimentation but for which there are no published results. We analyse the model system through linearised analysis and numerical simulations. This analysis predicts two modes of melt segregation: migration of melt from the centre of the pipe toward the wall and localisation of melt into high-porosity bands that emerge near the wall, at a low angle to the shear plane. We compare our results to those of Takei and Katz [2013] for plane Poiseuille flow; we also describe a new approximation of radially varying anisotropy that improves the self-consistency of models over those of Takei and Katz [2013]. This study provides a set of baseline, quantitative predictions to compare with future laboratory experiments on forced pipe Poiseuille flow of partially molten mantle.
20 Aug 2014
AG-2014.08-1092
physics.geo-ph
Ali N. Ebrahimi, Falk K. Wittel, Nuno A. M. Araújo, Hans J. Herrmann
A multi-scale scheme for the invasion percolation of rock fracture networks with heterogeneous fracture aperture fields is proposed. Inside fractures, fluid transport is calculated on the finest scale and found to be localized in channels as a consequence of the aperture field. The channel network is characterized and reduced to a vectorized artificial channel network (ACN). Different realizations of ACNs are used to systematically calculate efficient apertures for fluid transport inside differently sized fractures as well as fracture intersection and entry properties. Typical situations in fracture networks are parameterized by fracture inclination, flow path length along the fracture and intersection lengths in the entrance and outlet zones of fractures. Using these scaling relations obtained from the finer scales, we simulate the invasion process of immiscible fluids into saturated discrete fracture networks, which were studied in previous works.
12 Aug 2014
AG-2014.08-425
physics.geo-ph
Stéphane Labrosse
The improvements of the knowledge of the seismic structure of the inner core and the complexities thereby revealed ask for a dynamical origin. Sub-solidus convection was one of the early suggestions to explain the seismic anisotropy, but it requires an unstable density gradient either from thermal or compositional origin, or from both. Temperature and composition profiles in the inner core are computed using a unidimensional model of core evolution including diffusion in the inner core and fractional crystallisation at the inner core boundary (ICB). The thermal conductivity of the core has been recently revised upwardly and, moreover, found to increase with depth. Values of the heat flow across the core mantle boundary (CMB) sufficient to maintain convection in the whole outer core are not sufficient to make the temperature in the inner core super-isentropic and therefore prone to thermal instability. An unreasonably high CMB heat flow is necessary to this end. The compositional stratification results from a competition of the increase of the concentration of light elements in the outer core with inner core growth, which makes the inner core concentration also increase, and of the decrease of the liquidus, which makes the partition coefficient decrease as well as the concentration of light elements in the solid. While the latter (destabilizing) effect dominates at small inner core sizes, the former takes over for a large inner core. The turnover point is encountered for an inner core about half its current size in the case of S, but much larger for the case of O. The combined thermal and compositional buoyancy is stabilizing and solid-state convection in the inner core appears unlikely, unless an early double-diffusive instability can set in.
8 Aug 2014